The DBI2 appears to be write-only and there's no read accesses in the code
anyways, so let's remove all the read_dbi2 related code.

Link: https://lore.kernel.org/r/20200821035420.380495-33-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>

The Tegra driver has its own defines for common Designware Port Logic
registers. Convert it to use the standard register definitions.

Link: https://lore.kernel.org/r/20200821035420.380495-32-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org

While the Designware controller appears to hard code the PCI_CAP_ID_EXP
capability register at 0x70, there's no need to hard code this in the
driver as it is discoverable.

Link: https://lore.kernel.org/r/20200821035420.380495-31-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Pratyush Anand <pratyush.anand@gmail.com>
Cc: linux-omap@vger.kernel.org

The QCom driver has its own defines for common PCI config space
registers. It also hard codes the capability register offsets which are
discoverable. Convert it to use the standard register definitions.

Link: https://lore.kernel.org/r/20200821035420.380495-30-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-arm-msm@vger.kernel.org

The i.MX6 driver has its own defines for common PCI config space
registers. It also hard codes the capability register offsets which are
discoverable. Convert it to use the standard register definitions.

Link: https://lore.kernel.org/r/20200821035420.380495-29-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>

The meson 'elbi' registers are just the Designware 'dbi' space and all
the registers accessed are either standard PCI config space or DWC port
logic registers. Convert the accesses to use the common defines and
register accessors.

Link: https://lore.kernel.org/r/20200821035420.380495-28-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: linux-amlogic@lists.infradead.org

The common Designware init already initializes the RC PCI_COMMAND, BAR0
and BAR1 registers.

The only difference here is the common code sets SERR. If clearing SERR
is what's desired, then the Meson driver should do that instead.

Link: https://lore.kernel.org/r/20200821035420.380495-27-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org

The meson lanes initialization is the same DWC port logic registers as
in dw_pcie_setup(). We just need to initialize 'num_lanes' to 1 to do
the same init.

dw_pcie_setup_rc() sets the PORT_LOGIC_SPEED_CHANGE bit, so setting it
can be dropped.

Link: https://lore.kernel.org/r/20200821035420.380495-26-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Cc: linux-amlogic@lists.infradead.org

"Fast Link Mode" is a simulation environment speed up setting which should
never be set and the default is not set. However some Amlogic platforms
have it set (by firmware presumably). See commit 87dccf09 ("PCI:
amlogic: meson: Don't use FAST_LINK_MODE to set up link") for more
information. Let's clear it in core DWC code so we can drop some vendor
specific code.

Link: https://lore.kernel.org/r/20200821035420.380495-25-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

Add a 'num_lanes' field to allow drivers to provide a the number of lanes
if not in DT or using a custom DT property. A driver can provide a
non-zero value which is used if the DT doesn't have a 'num-lanes'
property.

Link: https://lore.kernel.org/r/20200821035420.380495-24-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

PCIE_LINK_WIDTH_SPEED_CONTROL is already defined in pcie-designware.h,
so remove it from the i.MX6 driver.

Link: https://lore.kernel.org/r/20200821035420.380495-23-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>

Move the IS_ENABLED(CONFIG_PCI_MSI) check into dw_pcie_msi_init()
instead of duplicating it in all the drivers.

Link: https://lore.kernel.org/r/20200821035420.380495-22-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Richard Zhu <hongxing.zhu@nxp.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Stanimir Varbanov <svarbanov@mm-sol.com>
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-kernel@axis.com
Cc: linux-arm-msm@vger.kernel.org

The DWC core driver already parses and stores the 'num-viewport' DT
property, so there is no need for the Keystone driver to store it.

Link: https://lore.kernel.org/r/20200821035420.380495-21-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

The config space is divided in half for type 0 and type 1 accesses, but
this is pointless as there's only one iATU window which is
reconfigured on each access.

The only platform doing something custom is TI Keystone (surprise!).
It does its own mapping of the config space to avoid spliting the
config space and never actually uses va_cfg1_base as it has its own
config space accessors. With the splitting removed, Keystone can use the
default mapping of config space.

Link: https://lore.kernel.org/r/20200821035420.380495-20-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>

The PCI bridge resources are stored in pci_host_bridge.windows, so
there's no need to store them in a DWC specific struct. There's also no
need to parse the resources and store them a 2nd time as they are mainly
used for one time setup of iATU windows.

Link: https://lore.kernel.org/r/20200821035420.380495-19-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Jonathan Chocron <jonnyc@amazon.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>

The pci_host_bridge struct already has a pointer to its pci_bus, so
let's convert the one user to use the bridge struct and remove the
private 'root_bus' pointer.

Link: https://lore.kernel.org/r/20200821035420.380495-18-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org

Now that there are no more .scan_bus() callbacks, we can remove it and just
use pci_host_probe().

Link: https://lore.kernel.org/r/20200821035420.380495-17-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

TI keystone is the only Designware driver using .scan_bus(). This
function pointer is the only thing preventing the Designware driver from
using pci_host_probe(). Let's use the pci_ops.add_bus hook instead.

Link: https://lore.kernel.org/r/20200821035420.380495-16-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

Now that all the platforms with custom config access handling define
their own pci_ops, let's split the default config accessors to use
different pci_ops for root and child buses. With this, we can use the
generic config accessors. The child bus accesses mainly require a
.map_bus() hook to reconfigure the iATU on each config space access.

Link: https://lore.kernel.org/r/20200821035420.380495-14-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

Now that all the drivers needing custom config accessors have been
converted to define their own pci_ops, we can remove the DWC specific
function callbacks {rd,wr}_{own,other}_conf.

Link: https://lore.kernel.org/r/20200821035420.380495-13-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

Now that DWC drivers can setup their own pci_ops for the root and child
buses, convert the HiSilicon histb driver to use the standard pci_ops
for root bus config accesses.

Link: https://lore.kernel.org/r/20200821035420.380495-12-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

Now that DWC drivers can setup their own pci_ops for the root and child
buses, convert the Samsung Exynos driver to use the standard pci_ops for
root bus config accesses.

Link: https://lore.kernel.org/r/20200821035420.380495-11-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-samsung-soc@vger.kernel.org

Now that DWC drivers can setup their own pci_ops for the root and child
buses, convert the HiSilicon Kirin driver to use the standard pci_ops
for root bus config accesses.

Link: https://lore.kernel.org/r/20200821035420.380495-10-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

Now that DWC drivers can setup their own pci_ops for the root and child
buses, convert the Amlogic meson driver to use the standard pci_ops for
root bus config accesses.

Link: https://lore.kernel.org/r/20200821035420.380495-9-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Yue Wang <yue.wang@Amlogic.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: linux-amlogic@lists.infradead.org

Now that DWC drivers can setup their own pci_ops for the root and child
buses, convert the Tegra driver to use the standard pci_ops for root
bus config accesses.

Link: https://lore.kernel.org/r/20200821035420.380495-8-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-tegra@vger.kernel.org

Now that DWC drivers can setup their own pci_ops for the root and child
buses, convert the TI Keystone driver to use the standard pci_ops for
config accesses.

Link: https://lore.kernel.org/r/20200821035420.380495-7-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

Now that DWC drivers can setup their own pci_ops for the root and child
buses, convert the Amazon driver to use the standard pci_ops for child
bus config accesses.

Link: https://lore.kernel.org/r/20200821035420.380495-6-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jonathan Chocron <jonnyc@amazon.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

The Designware root port config space is memory mapped accesses via the
DBI space by default. Add a common implementation
dw_pcie_own_conf_map_bus() for platforms to use.

Link: https://lore.kernel.org/r/20200821035420.380495-5-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

In preparation to allow drivers to set their own root and child pci_ops
instead of using the DWC specific config space ops, we need to make
the pci_host_bridge pointer available and move setting the bridge->ops
and bridge->child_ops pointer to before the .host_init() hook.

Link: https://lore.kernel.org/r/20200821035420.380495-4-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

The Designware DBI space contains the root bus bridge config space.
Platforms needing custom {rd,wr}_own_conf functions are also the ones
needing custom {read,write}_dbi ops functions and the access sequences
are the same.

Replace all dw_pcie_{rd,wr}_own_conf() calls with the DBI variants in
preparation to remove dw_pcie_{rd,wr}_own_conf().

Link: https://lore.kernel.org/r/20200821035420.380495-3-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

The current check will result in the multiple function device
fails to initialize. So fix the check by masking out the
multiple function bit.

Link: https://lore.kernel.org/r/20200818092746.24366-1-Zhiqiang.Hou@nxp.com
Fixes: 0b24134f ("PCI: dwc: Add validation that PCIe core is set to correct mode")
Signed-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: NRob Herring <robh@kernel.org>

Fix kerneldoc warnings, e.g.,

  $ make W=1 drivers/pci/
  drivers/pci/ats.c:196: warning: Function parameter or member 'pdev' not described in 'pci_enable_pri'
  drivers/pci/ats.c:196: warning: Function parameter or member 'reqs' not described in 'pci_enable_pri'
  ...

Link: https://lore.kernel.org/r/20200729201224.26799-2-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-3-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-4-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-5-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-6-krzk@kernel.org
Link: https://lore.kernel.org/r/20200729201224.26799-7-krzk@kernel.orgSigned-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add support for Versal CPM as Root Port.

The Versal ACAP devices include CCIX-PCIe Module (CPM). The integrated
block for CPM along with the integrated bridge can function as PCIe Root
Port.

Bridge error and legacy interrupts in Versal CPM are handled using Versal
CPM specific interrupt line.

[bhelgaas: fold in kerneldoc fix from
https://lore.kernel.org/linux-acpi/20200729201224.26799-7-krzk@kernel.org/]
Link: https://lore.kernel.org/r/1592312214-9347-3-git-send-email-bharat.kumar.gogada@xilinx.comSigned-off-by: NBharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRob Herring <robh@kernel.org>

The majority of DT based host drivers use the default .map_irq() and
.swizzle_irq() functions, so let's initialize the function pointers to
the default and drop setting them in the host drivers.

Drivers like iProc which don't support legacy interrupts need to set
.map_irq() back to NULL.

Link: https://lore.kernel.org/r/20200722022514.1283916-20-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

Now that pci_parse_request_of_pci_ranges() callers just setup
pci_host_bridge.windows and dma_ranges directly and don't need the bus
range returned, we can just initialize them when allocating the
pci_host_bridge struct.

With this, pci_parse_request_of_pci_ranges() becomes a static function.

Link: https://lore.kernel.org/r/20200722022514.1283916-19-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>

The rcar-gen2 host driver still uses the old Arm PCI setup function
pci_common_init_dev(). Let's update it to use the modern
devm_pci_alloc_host_bridge(), pci_parse_request_of_pci_ranges() and
pci_host_probe() functions.

Link: https://lore.kernel.org/r/20200722022514.1283916-18-robh@kernel.orgSigned-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-renesas-soc@vger.kernel.org

There is no need to call the dev_err() function directly to print a
custom message when handling an error from either the platform_get_irq() or
platform_get_irq_byname() functions as both are going to display an
appropriate error message in case of a failure.

This change is as per suggestions from Coccinelle, e.g.,

  drivers/pci/controller/dwc/pcie-armada8k.c:252:2-9: line 252 is
  redundant because platform_get_irq() already prints an error

[bhelgaas: squashed into one commit]
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20200802142601.1635926-2-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-3-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-4-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-5-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-6-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-7-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-8-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-9-kw@linux.com
Link: https://lore.kernel.org/r/20200802142601.1635926-10-kw@linux.com
Link: https://lore.kernel.org/r/20200803071040.1663662-1-kw@linux.comSigned-off-by: NKrzysztof Wilczyński <kw@linux.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ley Foon Tan <ley.foon.tan@intel.com> # altera
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> # dwc

Add support for PCIe controller in J721E SoC. The controller uses the
Cadence PCIe core programmed by pcie-cadence*.c. The PCIe controller
will work in both host mode and device mode.
Some of the features of the controller are:
  *) Supports both RC mode and EP mode
  *) Supports MSI and MSI-X support
  *) Supports upto GEN3 speed mode
  *) Supports SR-IOV capability
  *) Ability to route all transactions via SMMU (support will be added
     in a later patch).

Link: https://lore.kernel.org/r/20200722110317.4744-14-kishon@ti.comSigned-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

Implement ->set_msix() and ->get_msix() callback functions in order
to configure MSIX capability in the PCIe endpoint controller.

Add cdns_pcie_ep_send_msix_irq() to send MSIX interrupts to Host.
cdns_pcie_ep_send_msix_irq() gets the MSIX table address (virtual
address) from "struct cdns_pcie_epf" that gets initialized in
->set_bar() call back function.

[kishon@ti.com: Re-implement MSIX support in accordance with the
 re-designed core MSI-X interfaces]
Link: https://lore.kernel.org/r/20200722110317.4744-11-kishon@ti.comSigned-off-by: NAlan Douglas <adouglas@cadence.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>

sparse report build warning as follows:

drivers/pci/controller/pci-hyperv.c:941:5: warning:
 symbol 'hv_read_config_block' was not declared. Should it be static?
drivers/pci/controller/pci-hyperv.c:1021:5: warning:
 symbol 'hv_write_config_block' was not declared. Should it be static?
drivers/pci/controller/pci-hyperv.c:1090:5: warning:
 symbol 'hv_register_block_invalidate' was not declared. Should it be static?

Those functions are not used outside of this file, so mark them static.

Link: https://lore.kernel.org/r/20200706135234.80758-1-weiyongjun1@huawei.comReported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>