Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NAmir Goldstein <amir73il@gmail.com>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>

An upper dir is marked "impure" to let ovl_iterate() know that this
directory may contain non pure upper entries whose d_ino may need to be
read from the origin inode.

We already mark a non-merge dir "impure" when moving a non-pure child
entry inside it, to let ovl_iterate() know not to iterate the non-merge
dir directly.

Mark also a merge dir "impure" when moving a non-pure child entry inside
it and when copying up a child entry inside it.

This can be used to optimize ovl_iterate() to perform a "pure merge" of
upper and lower directories, merging the content of the directories,
without having to read d_ino from origin inodes.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

When moving a merge dir or non-dir with copy up origin into a non-merge
upper dir (a.k.a pure upper dir), we are marking the target parent dir
"impure". ovl_iterate() iterates pure upper dirs directly, because there is
no need to filter out whiteouts and merge dir content with lower dir. But
for the case of an "impure" upper dir, ovl_iterate() will not be able to
iterate the real upper dir directly, because it will need to lookup the
origin inode and use it to fill d_ino.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

On failure to set opaque/redirect xattr on rename, skip setting xattr and
return -EXDEV.

On failure to set opaque xattr when creating a new directory, -EIO is
returned instead of -EOPNOTSUPP.

Any failure to set those xattr will be recorded in super block and
then setting any xattr on upper won't be attempted again.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

xattr are needed by overlayfs for setting opaque dir, redirect dir
and copy up origin.

Check at mount time by trying to set the overlay.opaque xattr on the
workdir and if that fails issue a warning message.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

For directory entries, non zero oe->numlower implies OVL_TYPE_MERGE.
Define a new type flag OVL_TYPE_ORIGIN to indicate that an entry holds a
reference to its lower copy up origin.

For directory entries ORIGIN := MERGE && UPPER. For non-dir entries ORIGIN
means that a lower type dentry has been recently copied up or that we were
able to find the copy up origin from overlay.origin xattr.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Sometimes it is interesting to know if an upper file is pure upper or a
copy up target, and if it is a copy up target, it may be interesting to
find the copy up origin.

This will be used to preserve lower inode numbers across copy up.

Store the lower inode file handle in upper inode extended attribute
overlay.origin on copy up to use it later for these cases.  Store the lower
filesystem uuid along side the file handle, so we can validate that we are
looking for the origin file in the original fs.

If lower fs does not support NFS export ops store a zero sized xattr so we
can always use the overlay.origin xattr to distinguish between a copy up
and a pure upper inode.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Some features can only work when all layers are on the same fs.  Test this
condition during mount time, so features can check them later.

Add helper ovl_same_sb() to return the common super block in case all
layers are on the same fs.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The overlay sb 'copyup_wq' and overlay inode 'copying' condition
variable are about to replace the upper sb rename_lock, as finer
grained synchronization objects for concurrent copy up.
Suggested-by: NMiklos Szeredi <miklos@szeredi.hu>
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This is needed for choosing between concurrent copyup
using O_TMPFILE and legacy copyup using workdir+rename.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

FWIW, there's a bit of abuse of struct kstat in overlayfs object
creation paths - for one thing, it ends up with a very small subset
of struct kstat (mode + rdev), for another it also needs link in
case of symlinks and ends up passing it separately.

IMO it would be better to introduce a separate object for that.

In principle, we might even lift that thing into general API and switch
 ->mkdir()/->mknod()/->symlink() to identical calling conventions.  Hell
knows, perhaps ->create() as well...
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

This removes code duplication.
Signed-off-by: NAmir Goldstein <amir73il@gmail.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

oe->opaque is set for

 a) whiteouts
 b) directories having the "trusted.overlay.opaque" xattr

Case b can be simplified, since setting the xattr always implies setting
oe->opaque.  Also once set, the opaque flag is never cleared.

Don't need to set opaque flag for non-directories.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Current code returns EXDEV when a directory would need to be copied up to
move.  We could copy up the directory tree in this case, but there's
another, simpler solution: point to old lower directory from moved upper
directory.

This is achieved with a "trusted.overlay.redirect" xattr storing the path
relative to the root of the overlay.  After such attribute has been set,
the directory can be moved without further actions required.

This is a backward incompatible feature, old kernels won't be able to
correctly mount an overlay containing redirected directories.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

If a directory has the "trusted.overlay.redirect" xattr, it means that the
value of the xattr should be used to find the underlying directory on the
next lower layer.

The redirect may be relative or absolute.  Absolute redirects begin with a
slash.

A relative redirect means: instead of the current dentry's name use the
value of the redirect to find the directory in the next lower
layer. Relative redirects must not contain a slash.

An absolute redirect means: look up the directory relative to the root of
the overlay using the value of the redirect in the next lower layer.

Redirects work on lower layers as well.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

fs/overlayfs/super.c is the biggest of the overlayfs source files and it
contains various utility functions as well as the rather complicated lookup
code.  Split these parts out to separate files.

Before:

 1446 fs/overlayfs/super.c

After:

  919 fs/overlayfs/super.c
  267 fs/overlayfs/namei.c
  235 fs/overlayfs/util.c
   51 fs/overlayfs/ovl_entry.h
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

d_is_dir() is safe to call on a negative dentry.  Use this fact to simplify
handling of the lower or merged directories.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The remainging uses of __OVL_PATH_PURE can be replaced by
ovl_dentry_is_opaque().
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Currently ovl_lookup() checks existence of lower file even if there's a
non-directory on upper (which is always opaque).  This is done so that
remove can decide whether a whiteout is needed or not.

It would be better to defer this check to unlink, since most of the time
the gathered information about opaqueness will be unused.

This adds a helper ovl_lower_positive() that checks if there's anything on
the lower layer(s).

The following patches also introduce changes to how the "opaque" attribute
is updated on directories: this attribute is added when the directory is
creted or moved over a whiteout or object covering something on the lower
layer.  However following changes will allow the attribute to remain on the
directory after being moved, even if the new location doesn't cover
anything.  Because of this, we need to check lower layers even for opaque
directories, so that whiteout is only created when necessary.

This function will later be also used to decide about marking a directory
opaque, so deal with negative dentries as well.  When dealing with
negative, it's enough to check for being a whiteout

If the dentry is positive but not upper then it also obviously needs
whiteout/opaque.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

And use it instead of ovl_dentry_is_opaque() where appropriate.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

No sense in opening special files on the underlying layers, they work just
as well if opened on the overlay.

Side effect is that it's no longer possible to connect one side of a pipe
opened on overlayfs with the other side opened on the underlying layer.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Generated patch:

sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2`
sed -i "s/\brename2\b/rename/g" `git grep -wl rename2`
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Now that overlayfs has xattr handlers for iop->{set,remove}xattr, use
those same handlers for iop->getxattr as well.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Commit d837a49b ("ovl: fix POSIX ACL setting") switches from
iop->setxattr from ovl_setxattr to generic_setxattr, so switch from
ovl_removexattr to generic_removexattr as well.  As far as permission
checking goes, the same rules should apply in either case.

While doing that, rename ovl_setxattr to ovl_xattr_set to indicate that
this is not an iop->setxattr implementation and remove the unused inode
argument.

Move ovl_other_xattr_set above ovl_own_xattr_set so that they match the
order of handlers in ovl_xattr_handlers.
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Fixes: d837a49b ("ovl: fix POSIX ACL setting")
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Make sure ovl_own_xattr_handler only matches attribute names starting
with "overlay.", not "overlayXXX".
Signed-off-by: NAndreas Gruenbacher <agruenba@redhat.com>
Fixes: d837a49b ("ovl: fix POSIX ACL setting")
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

When mounting overlayfs it needs a clean "work" directory under the
supplied workdir.

Previously the mount code removed this directory if it already existed and
created a new one.  If the removal failed (e.g. directory was not empty)
then it fell back to a read-only mount not using the workdir.

While this has never been reported, it is possible to get a non-empty
"work" dir from a previous mount of overlayfs in case of crash in the
middle of an operation using the work directory.

In this case the left over state should be discarded and the overlay
filesystem will be consistent, guaranteed by the atomicity of operations on
moving to/from the workdir to the upper layer.

This patch implements cleaning out any files left in workdir.  It is
implemented using real recursion for simplicity, but the depth is limited
to 2, because the worst case is that of a directory containing whiteouts
under "work".
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>

When a copy up of a directory occurs which has the opaque xattr set, the
xattr remains in the upper directory. The immediate behavior with overlayfs
is that the upper directory is not treated as opaque, however after a
remount the opaque flag is used and upper directory is treated as opaque.
This causes files created in the lower layer to be hidden when using
multiple lower directories.

Fix by not copying up the opaque flag.

To reproduce:

 ----8<---------8<---------8<---------8<---------8<---------8<----
mkdir -p l/d/s u v w mnt
mount -t overlay overlay -olowerdir=l,upperdir=u,workdir=w mnt
rm -rf mnt/d/
mkdir -p mnt/d/n
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
touch mnt/d/foo
umount mnt
mount -t overlay overlay -olowerdir=u:l,upperdir=v,workdir=w mnt
ls mnt/d
 ----8<---------8<---------8<---------8<---------8<---------8<----
 
output should be:  "foo  n"
Reported-by: NDerek McGowan <dmcg@drizz.net>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=151291Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>

Setting POSIX ACL needs special handling:

1) Some permission checks are done by ->setxattr() which now uses mounter's
creds ("ovl: do operations on underlying file system in mounter's
context").  These permission checks need to be done with current cred as
well.

2) Setting ACL can fail for various reasons.  We do not need to copy up in
these cases.

In the mean time switch to using generic_setxattr.

[Arnd Bergmann] Fix link error without POSIX ACL. posix_acl_from_xattr()
doesn't have a 'static inline' implementation when CONFIG_FS_POSIX_ACL is
disabled, and I could not come up with an obvious way to do it.

This instead avoids the link error by defining two sets of ACL operations
and letting the compiler drop one of the two at compile time depending
on CONFIG_FS_POSIX_ACL. This avoids all references to the ACL code,
also leading to smaller code.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Inode attributes are copied up to overlay inode (uid, gid, mode, atime,
mtime, ctime) so generic code using these fields works correcty.  If a hard
link is created in overlayfs separate inodes are allocated for each link.
If chmod/chown/etc. is performed on one of the links then the inode
belonging to the other ones won't be updated.

This patch attempts to fix this by sharing inodes for hard links.

Use inode hash (with real inode pointer as a key) to make sure overlay
inodes are shared for hard links on upper.  Hard links on lower are still
split (which is not user observable until the copy-up happens, see
Documentation/filesystems/overlayfs.txt under "Non-standard behavior").

The inode is only inserted in the hash if it is non-directoy and upper.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

To get from overlay inode to real inode we currently use 'struct
ovl_entry', which has lifetime connected to overlay dentry.  This is okay,
since each overlay dentry had a new overlay inode allocated.

Following patch will break that assumption, so need to leave out ovl_entry.
This patch stores the real inode directly in i_private, with the lowest bit
used to indicate whether the inode is upper or lower.

Lifetime rules remain, using ovl_inode_real() must only be done while
caller holds ref on overlay dentry (and hence on real dentry), or within
RCU protected regions.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Fix atime update logic in overlayfs.

This patch adds an i_op->update_time() handler to overlayfs inodes.  This
forwards atime updates to the upper layer only.  No atime updates are done
on lower layers.

Remove implicit atime updates to underlying files and directories with
O_NOATIME.  Remove explicit atime update in ovl_readlink().

Clear atime related mnt flags from cloned upper mount.  This means atime
updates are controlled purely by overlayfs mount options.

Reported-by: Konstantin Khlebnikov <koct9i@gmail.com> 
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

The fact that we always do permission checking on the overlay inode and
clear MAY_WRITE for checking access to the lower inode allows cruft to be
removed from ovl_permission().

1) "default_permissions" option effectively did generic_permission() on the
overlay inode with i_mode, i_uid and i_gid updated from underlying
filesystem.  This is what we do by default now.  It did the update using
vfs_getattr() but that's only needed if the underlying filesystem can
change (which is not allowed).  We may later introduce a "paranoia_mode"
that verifies that mode/uid/gid are not changed.

2) splitting out the IS_RDONLY() check from inode_permission() also becomes
unnecessary once we remove the MAY_WRITE from the lower inode check.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Now we are planning to do DAC permission checks on overlay inode
itself. And to make it work, we will need to make sure we can get acls from
underlying inode. So define ->get_acl() for overlay inodes and this in turn
calls into underlying filesystem to get acls, if any.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

Right now when a new overlay inode is created, we initialize overlay
inode's ->i_mode from underlying inode ->i_mode but we retain only
file type bits (S_IFMT) and discard permission bits.

This patch changes it and retains permission bits too. This should allow
overlay to do permission checks on overlay inode itself in task context.

[SzM] It also fixes clearing suid/sgid bits on write.
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Reported-by: NEryu Guan <eguan@redhat.com>
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>
Fixes: 4bacc9c9 ("overlayfs: Make f_path always point to the overlay and f_inode to the underlay")
Cc: <stable@vger.kernel.org>

The two methods essentially do the same: find the real dentry/inode
belonging to an overlay dentry.  The difference is in the usage:

vfs_open() uses ->d_select_inode() and expects the function to perform
copy-up if necessary based on the open flags argument.

file_dentry() uses ->d_real() passing in the overlay dentry as well as the
underlying inode.

vfs_rename() uses ->d_select_inode() but passes zero flags.  ->d_real()
with a zero inode would have worked just as well here.

This patch merges the functionality of ->d_select_inode() into ->d_real()
by adding an 'open_flags' argument to the latter.

[Al Viro] Make the signature of d_real() match that of ->d_real() again.
And constify the inode argument, while we are at it.
Signed-off-by: NMiklos Szeredi <mszeredi@redhat.com>

smack ->d_instantiate() uses ->setxattr(), so to be able to call it before
we'd hashed the new dentry and attached it to inode, we need ->setxattr()
instances getting the inode as an explicit argument rather than obtaining
it from dentry.

Similar change for ->getxattr() had been done in commit ce23e640.  Unlike
->getxattr() (which is used by both selinux and smack instances of
->d_instantiate()) ->setxattr() is used only by smack one and unfortunately
it got missed back then.
Reported-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Tested-by: NCasey Schaufler <casey@schaufler-ca.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>