- 04 7月, 2014 1 次提交
-
-
由 Stephan Mueller 提交于
For the CTR DRBG, the drbg_state->scratchpad temp buffer (i.e. the memory location immediately before the drbg_state->tfm variable is the buffer that the BCC function operates on. BCC operates blockwise. Making the temp buffer drbg_statelen(drbg) in size is sufficient when the DRBG state length is a multiple of the block size. For AES192 this is not the case and the length for temp is insufficient (yes, that also means for such ciphers, the final output of all BCC rounds are truncated before used to update the state of the DRBG!!). The patch enlarges the temp buffer from drbg_statelen to drbg_statelen + drbg_blocklen to have sufficient space. Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 03 7月, 2014 6 次提交
-
-
由 Arnd Bergmann 提交于
The interrupt handler in the ux500 crypto driver has an obviously incorrect way to access the data buffer, which for a while has caused this build warning: ../ux500/cryp/cryp_core.c: In function 'cryp_interrupt_handler': ../ux500/cryp/cryp_core.c:234:5: warning: passing argument 1 of '__fswab32' makes integer from pointer without a cast [enabled by default] writel_relaxed(ctx->indata, ^ In file included from ../include/linux/swab.h:4:0, from ../include/uapi/linux/byteorder/big_endian.h:12, from ../include/linux/byteorder/big_endian.h:4, from ../arch/arm/include/uapi/asm/byteorder.h:19, from ../include/asm-generic/bitops/le.h:5, from ../arch/arm/include/asm/bitops.h:340, from ../include/linux/bitops.h:33, from ../include/linux/kernel.h:10, from ../include/linux/clk.h:16, from ../drivers/crypto/ux500/cryp/cryp_core.c:12: ../include/uapi/linux/swab.h:57:119: note: expected '__u32' but argument is of type 'const u8 *' static inline __attribute_const__ __u32 __fswab32(__u32 val) There are at least two, possibly three problems here: a) when writing into the FIFO, we copy the pointer rather than the actual data we want to give to the hardware b) the data pointer is an array of 8-bit values, while the FIFO is 32-bit wide, so both the read and write access fail to do a proper type conversion c) This seems incorrect for big-endian kernels, on which we need to byte-swap any register access, but not normally FIFO accesses, at least the DMA case doesn't do it either. This converts the bogus loop to use the same readsl/writesl pair that we use for the two other modes (DMA and polling). This is more efficient and consistent, and probably correct for endianess. The bug has existed since the driver was first merged, and was probably never detected because nobody tried to use interrupt mode. It might make sense to backport this fix to stable kernels, depending on how the crypto maintainers feel about that. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: linux-crypto@vger.kernel.org Cc: Fabio Baltieri <fabio.baltieri@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: stable@vger.kernel.org Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Luca Clementi 提交于
Print the driver name that is being tested. The driver name can be inferred parsing /proc/crypto but having it in the output is clearer Signed-off-by: NLuca Clementi <luca.clementi@gmail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stanimir Varbanov 提交于
Here is Qualcomm crypto driver device tree binding documentation to used as a reference example. Signed-off-by: NStanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stanimir Varbanov 提交于
Modify crypto Kconfig and Makefile in order to build the qce driver and adds qce Makefile as well. Signed-off-by: NStanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stanimir Varbanov 提交于
The driver is separated by functional parts. The core part implements a platform driver probe and remove callbaks. The probe enables clocks, checks crypto version, initialize and request dma channels, create done tasklet and init crypto queue and finally register the algorithms into crypto core subsystem. - DMA and SG helper functions implement dmaengine and sg-list helper functions used by other parts of the crypto driver. - ablkcipher algorithms implementation of AES, DES and 3DES crypto API callbacks, the crypto register alg function, the async request handler and its dma done callback function. - SHA and HMAC transforms implementation and registration of ahash crypto type. It includes sha1, sha256, hmac(sha1) and hmac(sha256). - infrastructure to setup the crypto hw contains functions used to setup/prepare hardware registers for all algorithms supported by the crypto block. It also exports few helper functions needed by algorithms: - to check hardware status - to start crypto hardware - to translate data stream to big endian form Adds register addresses and bit/masks used by the driver as well. Signed-off-by: NStanimir Varbanov <svarbanov@mm-sol.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jarod Wilson 提交于
Per further discussion with NIST, the requirements for FIPS state that we only need to panic the system on failed kernel module signature checks for crypto subsystem modules. This moves the fips-mode-only module signature check out of the generic module loading code, into the crypto subsystem, at points where we can catch both algorithm module loads and mode module loads. At the same time, make CONFIG_CRYPTO_FIPS dependent on CONFIG_MODULE_SIG, as this is entirely necessary for FIPS mode. v2: remove extraneous blank line, perform checks in static inline function, drop no longer necessary fips.h include. CC: "David S. Miller" <davem@davemloft.net> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Stephan Mueller <stephan.mueller@atsec.com> Signed-off-by: NJarod Wilson <jarod@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 26 6月, 2014 5 次提交
-
-
由 Tadeusz Struk 提交于
Firmware loader crashes when no firmware file is present. Reviewed-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
After updates to checkpatch new warnings pops up this patch fixes them. Signed-off-by: NBruce Allan <bruce.w.allan@intel.com> Acked-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
Updated Firmware Info Metadata Reviewed-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
Fix random config build warnings: Implicit-function-declaration ‘__raw_writel’ Cast to pointer from integer of different size [-Wint-to-pointer-cast] Reviewed-by: NBruce Allan <bruce.w.allan@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stephan Mueller 提交于
As reported by a static code analyzer, the code for the ordering of the linked list can be simplified. Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 25 6月, 2014 6 次提交
-
-
由 Eric Dumazet 提交于
kvfree() helper is now available, use it instead of open code it. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Patch fixes following sparse warning: CHECK arch/x86/crypto/des3_ede_glue.c arch/x86/crypto/des3_ede_glue.c:308:52: warning: restricted __be64 degrades to integer arch/x86/crypto/des3_ede_glue.c:309:52: warning: restricted __be64 degrades to integer arch/x86/crypto/des3_ede_glue.c:310:52: warning: restricted __be64 degrades to integer arch/x86/crypto/des3_ede_glue.c:326:44: warning: restricted __be64 degrades to integer Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ruchika Gupta 提交于
At few places in caamhash and caamalg, after allocating a dmable buffer for sg table , the buffer was being modified. As per definition of DMA_FROM_DEVICE ,afer allocation the memory should be treated as read-only by the driver. This patch shifts the allocation of dmable buffer for sg table after it is populated by the driver, making it read-only as per the DMA API's requirement. Signed-off-by: NRuchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ruchika Gupta 提交于
CAAM IP has certain 64 bit registers . 32 bit architectures cannot force atomic-64 operations. This patch adds definition of these atomic-64 operations for little endian platforms. The definitions which existed previously were for big endian platforms. Signed-off-by: NRuchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ruchika Gupta 提交于
For platforms with virtualization enabled 1. The job ring registers can be written to only is the job ring has been started i.e STARTR bit in JRSTART register is 1 2. For DECO's under direct software control, with virtualization enabled PL, BMT, ICID and SDID values need to be provided. These are provided by selecting a Job ring in start mode whose parameters would be used for the DECO access programming. Signed-off-by: NRuchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ruchika Gupta 提交于
Some registers like SECVID, CHAVID, CHA Revision Number, CTPR were defined as 64 bit resgisters. The IP provides a DWT bit(Double word Transpose) to transpose the two words when a double word register is accessed. However setting this bit would also affect the operation of job descriptors as well as other registers which are truly double word in nature. So, for the IP to work correctly on big-endian as well as little-endian SoC's, change is required to access all 32 bit registers as 32 bit quantities. Signed-off-by: NRuchika Gupta <ruchika.gupta@freescale.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 23 6月, 2014 1 次提交
-
-
由 Herbert Xu 提交于
qat adds -I to the ccflags. Unfortunately it uses CURDIR which breaks when make is invoked with O=. This patch replaces CURDIR with $(src) which should work with/without O=. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 21 6月, 2014 1 次提交
-
-
由 Ard Biesheuvel 提交于
This adds 4 test vectors for GHASH (of which one for chunked mode), making a total of 5. Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 20 6月, 2014 20 次提交
-
-
由 chandramouli narayanan 提交于
This patch introduces "by8" AES CTR mode AVX optimization inspired by Intel Optimized IPSEC Cryptograhpic library. For additional information, please see: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=22972 The functions aes_ctr_enc_128_avx_by8(), aes_ctr_enc_192_avx_by8() and aes_ctr_enc_256_avx_by8() are adapted from Intel Optimized IPSEC Cryptographic library. When both AES and AVX features are enabled in a platform, the glue code in AESNI module overrieds the existing "by4" CTR mode en/decryption with the "by8" AES CTR mode en/decryption. On a Haswell desktop, with turbo disabled and all cpus running at maximum frequency, the "by8" CTR mode optimization shows better performance results across data & key sizes as measured by tcrypt. The average performance improvement of the "by8" version over the "by4" version is as follows: For 128 bit key and data sizes >= 256 bytes, there is a 10-16% improvement. For 192 bit key and data sizes >= 256 bytes, there is a 20-22% improvement. For 256 bit key and data sizes >= 256 bytes, there is a 20-25% improvement. A typical run of tcrypt with AES CTR mode encryption of the "by4" and "by8" optimization shows the following results: tcrypt with "by4" AES CTR mode encryption optimization on a Haswell Desktop: --------------------------------------------------------------------------- testing speed of __ctr-aes-aesni encryption test 0 (128 bit key, 16 byte blocks): 1 operation in 343 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 336 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 491 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1130 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 7309 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 346 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 361 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 543 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1321 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 9649 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 369 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 366 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 595 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1531 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 10522 cycles (8192 bytes) testing speed of __ctr-aes-aesni decryption test 0 (128 bit key, 16 byte blocks): 1 operation in 336 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 350 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 487 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1129 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 7287 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 350 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 359 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 635 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1324 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 9595 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 364 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 377 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 604 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1527 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 10549 cycles (8192 bytes) tcrypt with "by8" AES CTR mode encryption optimization on a Haswell Desktop: --------------------------------------------------------------------------- testing speed of __ctr-aes-aesni encryption test 0 (128 bit key, 16 byte blocks): 1 operation in 340 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 330 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 450 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1043 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 6597 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 339 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 352 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 539 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1153 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 8458 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 353 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 360 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 512 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1277 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 8745 cycles (8192 bytes) testing speed of __ctr-aes-aesni decryption test 0 (128 bit key, 16 byte blocks): 1 operation in 348 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 335 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 451 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1030 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 6611 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 354 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 346 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 488 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1154 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 8390 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 357 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 362 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 515 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1284 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 8681 cycles (8192 bytes) crypto: Incorporate feed back to AES CTR mode optimization patch Specifically, the following: a) alignment around main loop in aes_ctrby8_avx_x86_64.S b) .rodata around data constants used in the assembely code. c) the use of CONFIG_AVX in the glue code. d) fix up white space. e) informational message for "by8" AES CTR mode optimization f) "by8" AES CTR mode optimization can be simply enabled if the platform supports both AES and AVX features. The optimization works superbly on Sandybridge as well. Testing on Haswell shows no performance change since the last. Testing on Sandybridge shows that the "by8" AES CTR mode optimization greatly improves performance. tcrypt log with "by4" AES CTR mode optimization on Sandybridge -------------------------------------------------------------- testing speed of __ctr-aes-aesni encryption test 0 (128 bit key, 16 byte blocks): 1 operation in 383 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 408 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 707 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1864 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 12813 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 395 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 432 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 780 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 2132 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 15765 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 416 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 438 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 842 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 2383 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 16945 cycles (8192 bytes) testing speed of __ctr-aes-aesni decryption test 0 (128 bit key, 16 byte blocks): 1 operation in 389 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 409 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 704 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1865 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 12783 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 409 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 434 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 792 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 2151 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 15804 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 421 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 444 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 840 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 2394 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 16928 cycles (8192 bytes) tcrypt log with "by8" AES CTR mode optimization on Sandybridge -------------------------------------------------------------- testing speed of __ctr-aes-aesni encryption test 0 (128 bit key, 16 byte blocks): 1 operation in 383 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 401 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 522 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1136 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 7046 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 394 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 418 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 559 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1263 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 9072 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 408 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 428 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 595 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1385 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 9224 cycles (8192 bytes) testing speed of __ctr-aes-aesni decryption test 0 (128 bit key, 16 byte blocks): 1 operation in 390 cycles (16 bytes) test 1 (128 bit key, 64 byte blocks): 1 operation in 402 cycles (64 bytes) test 2 (128 bit key, 256 byte blocks): 1 operation in 530 cycles (256 bytes) test 3 (128 bit key, 1024 byte blocks): 1 operation in 1135 cycles (1024 bytes) test 4 (128 bit key, 8192 byte blocks): 1 operation in 7079 cycles (8192 bytes) test 5 (192 bit key, 16 byte blocks): 1 operation in 414 cycles (16 bytes) test 6 (192 bit key, 64 byte blocks): 1 operation in 417 cycles (64 bytes) test 7 (192 bit key, 256 byte blocks): 1 operation in 572 cycles (256 bytes) test 8 (192 bit key, 1024 byte blocks): 1 operation in 1312 cycles (1024 bytes) test 9 (192 bit key, 8192 byte blocks): 1 operation in 9073 cycles (8192 bytes) test 10 (256 bit key, 16 byte blocks): 1 operation in 415 cycles (16 bytes) test 11 (256 bit key, 64 byte blocks): 1 operation in 454 cycles (64 bytes) test 12 (256 bit key, 256 byte blocks): 1 operation in 598 cycles (256 bytes) test 13 (256 bit key, 1024 byte blocks): 1 operation in 1407 cycles (1024 bytes) test 14 (256 bit key, 8192 byte blocks): 1 operation in 9288 cycles (8192 bytes) crypto: Fix redundant checks a) Fix the redundant check for cpu_has_aes b) Fix the key length check when invoking the CTR mode "by8" encryptor/decryptor. crypto: fix typo in AES ctr mode transform Signed-off-by: NChandramouli Narayanan <mouli@linux.intel.com> Reviewed-by: NMathias Krause <minipli@googlemail.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Patch adds x86_64 assembly implementation of Triple DES EDE cipher algorithm. Two assembly implementations are provided. First is regular 'one-block at time' encrypt/decrypt function. Second is 'three-blocks at time' function that gains performance increase on out-of-order CPUs. tcrypt test results: Intel Core i5-4570: des3_ede-asm vs des3_ede-generic: size ecb-enc ecb-dec cbc-enc cbc-dec ctr-enc ctr-dec 16B 1.21x 1.22x 1.27x 1.36x 1.25x 1.25x 64B 1.98x 1.96x 1.23x 2.04x 2.01x 2.00x 256B 2.34x 2.37x 1.21x 2.40x 2.38x 2.39x 1024B 2.50x 2.47x 1.22x 2.51x 2.52x 2.51x 8192B 2.51x 2.53x 1.21x 2.56x 2.54x 2.55x Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jussi Kivilinna 提交于
Signed-off-by: NJussi Kivilinna <jussi.kivilinna@iki.fi> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Dan Carpenter 提交于
The FIFOST_CONT_MASK define is cut and pasted twice so we can delete the second instance. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NKim Phillips <kim.phillips@freescale.com> Acked-by: NMarek Vasut <marex@denx.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 George Spelvin 提交于
There's no need for the K_table to be made of 64-bit words. For some reason, the original authors didn't fully reduce the values modulo the CRC32C polynomial, and so had some 33-bit values in there. They can all be reduced to 32 bits. Doing that cuts the table size in half. Since the code depends on both pclmulq and crc32, SSE 4.1 is obviously present, so we can use pmovzxdq to fetch it in the correct format. This adds (measured on Ivy Bridge) 1 cycle per main loop iteration (CRC of up to 3K bytes), less than 0.2%. The hope is that the reduced D-cache footprint will make up the loss in other code. Two other related fixes: * K_table is read-only, so belongs in .rodata, and * There's no need for more than 8-byte alignment Acked-by: NTim Chen <tim.c.chen@linux.intel.com> Signed-off-by: NGeorge Spelvin <linux@horizon.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
Update to makefiles etc. Don't update the firmware/Makefile yet since there is no FW binary in the crypto repo yet. This will be added later. v3 - removed change to ./firmware/Makefile Reviewed-by: NBruce W. Allan <bruce.w.allan@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
This patch adds DH895xCC hardware specific code. It hooks to the common infrastructure and provides acceleration for crypto algorithms. Acked-by: NJohn Griffin <john.griffin@intel.com> Reviewed-by: NBruce W. Allan <bruce.w.allan@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
This patch adds acceleration engine handler part the firmware loader. Acked-by: NBo Cui <bo.cui@intel.com> Reviewed-by: NBruce W. Allan <bruce.w.allan@intel.com> Signed-off-by: NKaren Xiang <karen.xiang@intel.com> Signed-off-by: NPingchaox Yang <pingchaox.yang@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
This patch adds microcode part of the firmware loader. v4 - splits FW loader part into two smaller patches. Acked-by: NBo Cui <bo.cui@intel.com> Reviewed-by: NBruce W. Allan <bruce.w.allan@intel.com> Signed-off-by: NKaren Xiang <karen.xiang@intel.com> Signed-off-by: NPingchaox Yang <pingchaox.yang@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
This patch adds qat crypto interface. Acked-by: NJohn Griffin <john.griffin@intel.com> Reviewed-by: NBruce W. Allan <bruce.w.allan@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
This patch adds FW interface structure definitions. Acked-by: NJohn Griffin <john.griffin@intel.com> Reviewed-by: NBruce W. Allan <bruce.w.allan@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
This patch adds a code that implements communication channel between the driver and the firmware. Acked-by: NJohn Griffin <john.griffin@intel.com> Reviewed-by: NBruce W. Allan <bruce.w.allan@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tadeusz Struk 提交于
This patch adds a common infractructure that will be used by all Intel(R) QuickAssist Technology (QAT) devices. v2 - added ./drivers/crypto/qat/Kconfig and ./drivers/crypto/qat/Makefile v4 - splits common part into more, smaller patches Acked-by: NJohn Griffin <john.griffin@intel.com> Reviewed-by: NBruce W. Allan <bruce.w.allan@intel.com> Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tom Lendacky 提交于
Add support for the CCP on arm64 as a platform device. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tom Lendacky 提交于
This patch provides the documentation of the device bindings for the AMD Cryptographic Coprocessor driver. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Tom Lendacky 提交于
Modify the PCI device support in prep for supporting the CCP as a platform device for arm64. Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stephan Mueller 提交于
The DRBG test code implements the CAVS test approach. As discussed for the test vectors, all DRBG types are covered with testing. However, not every backend cipher is covered with testing. To prevent the testmgr from logging missing testing, the NULL test is registered for all backend ciphers not covered with specific test cases. All currently implemented DRBG types and backend ciphers are defined in SP800-90A. Therefore, the fips_allowed flag is set for all. Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stephan Mueller 提交于
All types of the DRBG (CTR, HMAC, Hash) are covered with test vectors. In addition, all permutations of use cases of the DRBG are covered: * with and without predition resistance * with and without additional information string * with and without personalization string As the DRBG implementation is agnositc of the specific backend cipher, only test vectors for one specific backend cipher is used. For example: the Hash DRBG uses the same code paths irrespectively of using SHA-256 or SHA-512. Thus, the test vectors for SHA-256 cover the testing of all DRBG code paths of SHA-512. Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stephan Mueller 提交于
Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Stephan Mueller 提交于
The different DRBG types of CTR, Hash, HMAC can be enabled or disabled at compile time. At least one DRBG type shall be selected. The default is the HMAC DRBG as its code base is smallest. Signed-off-by: NStephan Mueller <smueller@chronox.de> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-