The SPARSE_IRQ considerably adds overhead to critical path of IRQ
handling.  However it doesn't benefit much in space for most systems with
limited IRQ_NR.  Should be disabled unless really necessary.
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Implement perf-events based hw-breakpoint interfaces for PowerPC
64-bit server (Book III S) processors.  This allows access to a
given location to be used as an event that can be counted or
profiled by the perf_events subsystem.

This is done using the DABR (data breakpoint register), which can
also be used for process debugging via ptrace.  When perf_event
hw_breakpoint support is configured in, the perf_event subsystem
manages the DABR and arbitrates access to it, and ptrace then
creates a perf_event when it is requested to set a data breakpoint.

[Adopted suggestions from Paul Mackerras <paulus@samba.org> to
- emulate_step() all system-wide breakpoints and single-step only the
  per-task breakpoints
- perform arch-specific cleanup before unregistration through
  arch_unregister_hw_breakpoint()
]
Signed-off-by: NK.Prasad <prasad@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This adds support kexec on FSL-BookE where the MMU can not be simply
switched off. The code borrows the initial MMU-setup code to create the
identical mapping mapping. The only difference to the original boot code
is the size of the mapping(s) and the executeable address.
The kexec code maps the first 2 GiB of memory in 256 MiB steps. This
should work also on e500v1 boxes.
SMP support is still not available.

(Kumar: Added minor change to build to ifdef CONFIG_PPC_STD_MMU_64 some
code that was PPC64 specific)
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch ports the kprobe-based event tracer to powerpc. This patch
is based on x86 port. This brings powerpc on par with x86.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The description says:

 Cause IO segments sent to a device for DMA to be merged virtually
 by the IOMMU when they happen to have been allocated contiguously.
 This doesn't add pressure to the IOMMU allocator. However, some
 drivers don't support getting large merged segments coming back
 from *_map_sg().

 Most drivers don't have this problem; it is safe to say Y here.

It's out of date. Long ago, drivers didn't have a way to tell IOMMUs
about their segment length limit (that is, the maximum segment length
that they can handle). So IOMMUs merged as many segments as possible
and gave too large segments to drivers.

dma_get_max_seg_size() was introduced to solve the above
problem. Device drives can use the API to tell IOMMU about the maximum
segment length that they can handle. In addition, the default limit
(64K) should be safe for everyone.

So this config option seems to be unnecessary.

Note that this config option just enables users to disable the virtual
merging by default. Users can still disable the virtual merging by the
boot parameter.
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

powerpc/booke: Introduce new CONFIG options for advanced debug registers

From: Dave Kleikamp <shaggy@linux.vnet.ibm.com>

Introduce new config options to simplify the ifdefs pertaining to the
advanced debug registers for booke and 40x processors:

CONFIG_PPC_ADV_DEBUG_REGS - boolean: true for dac-based processors
CONFIG_PPC_ADV_DEBUG_IACS - number of IAC registers
CONFIG_PPC_ADV_DEBUG_DACS - number of DAC registers
CONFIG_PPC_ADV_DEBUG_DVCS - number of DVC registers
CONFIG_PPC_ADV_DEBUG_DAC_RANGE - DAC ranges supported

Beginning conservatively, since I only have the facilities to test 440
hardware.  I believe all 40x and booke platforms support at least 2 IAC
and 2 DAC registers.  For 440, 4 IAC and 2 DVC registers are enabled, as
well as the DAC ranges.
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Acked-by: NDavid Gibson <dwg@au1.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

With dynamic irq descriptors the overhead of a large NR_IRQS is much lower
than it used to be. With more MSI-X capable adapters and drivers exploiting
multiple vectors we may as well allow the user to increase it beyond the
current maximum of 512.

32768 seems large enough that we'd never have to bump it again (although I bet
my prediction is horribly wrong). It boot tests OK and the vmlinux footprint
increase is only around 500kB due to:

struct irq_map_entry irq_map[NR_IRQS];

We format /proc/interrupts correctly with the previous changes:

             CPU0       CPU1       CPU2       CPU3       CPU4       CPU5
  286:          0          0          0          0          0          0
  516:          0          0          0          0          0          0
16689:       1833          0          0          0          0          0
17157:          0          0          0          0          0          0
17158:        319          0          0          0          0          0
25092:          0          0          0          0          0          0
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The Nintendo GameCube and Wii video game consoles do not have PCI hardware.
Avoid wasting their scarce memory by not including PCI support into the
kernel.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Version 3 of this patch is updated with documentation added to
Documentation/ABI.  There are no changes to any of the C code from v2
of the patch.

In order to support kernel DLPAR of CPU resources we need to provide an
interface to add (probe) and remove (release) the resource from the system.
This patch Creates new generic probe and release sysfs files to facilitate
cpu probe/release.  The probe/release interface provides for allowing each
arch to supply their own routines for implementing the backend of adding
and removing cpus to/from the system.

This also creates the powerpc specific stubs to handle the arch callouts
from writes to the sysfs files.

The creation and use of these files is regulated by the
CONFIG_ARCH_CPU_PROBE_RELEASE option so that only architectures that need the
capability will have the files created.
Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Merge common code between Microblaze and PowerPC.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Reviewed-by: NWolfram Sang <w.sang@pengutronix.de>
Tested-by: NMichal Simek <monstr@monstr.eu>

This patch adds suspend/resume support for MPC8540 and MPC8641D-
compatible CPUs. To reach sleep state, we just write the SLP bit
into the PM control and status register.

So far we don't support Deep Sleep mode as found in newer MPC85xx
CPUs (i.e. MPC8536). It can be relatively easy implemented though,
and for it we reserve 'mem' suspend type.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Defining CONFIG_SPARSE_IRQ enables generic code that gets rid of the
static irq_desc array, and replaces it with an array of pointers to
irq_descs.

It also allows node local allocation of irq_descs, however we
currently don't have the information available to do that, so we just
allocate them on all on node 0.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The irq_desc array consumes quite a lot of space, and for systems
that don't need or can't have 512 irqs it's just wasted space.

The first 16 are reserved for ISA, so the minimum of 32 is really
16 - and no one has asked for more than 512 so leave that as the
maximum.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Just as with kexec, hibernation may fail even on well-tested platforms:
some PCI device, a driver of which doesn't play well with hibernation,
is enough to break resuming.

Hibernation code is not much platform dependent, and hiding features only
because these were not verified on a particular hardware is
counterproductive: we just prevent the features from being widely tested.

For example, with this patch I just tested hibernation on a MPC83xx
board, and it works quite well, modulo a few drivers that need some
fixing.

So, let's make it possible to select hibernation support for all
PowerPCs, then let's wait for any possible bug reports, and actually fix
(or just collect ;-) the bugs instead of hiding them. If some platforms
really can't stand hibernation, we can make a blacklist, with proper
comments why exactly hibernation doesn't work, whether it is possible to
fix, and what needs to be done to fix it.

CONFIG_HIBERNATION is still =n by default, so the commit doesn't change
anything apart from ability to set it to =y.

I'm not sure if EXPERIMENTAL dependency is needed, I'd rather not add it
for a few reasons:

1) It doesn't matter much, for distro kernels user has no clue that some
   feature is experimental. Majority of defconfigs enable EXPERIMENTAL
   anyway (90 vs. 4, which, btw, means that EXPERIMENTAL is overused
   in Kconfigs);

2) EXPERIMENTAL is a good thing for features that change default
   behaviour of a kernel, while for hibernation user has to explicitly
   issue 'echo disk > /sys/power/state' to trigger any hibernation bugs;

3) Per init/Kconfig, EXPERIMENTAL is a good thing to scare and discourage
   users from 'widespread use of a feature', while we want to encourage
   that use.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Some System p configurations can already have more than 16 nodes so we
need to increase NODES_SHIFT. I chose 256 to give us some room to grow in the
future, although we can look at something smaller if the memory bloat is
considered too much.

Unless we clamp MAX_ACTIVE_REGIONS we end up with 300kB of extra bloat in
early_node_map in mm/page_alloc.c:

< 6144   early_node_map
> 307200 early_node_map

due to:

    #if MAX_NUMNODES >= 32
      /* If there can be many nodes, allow up to 50 holes per node */
      #define MAX_ACTIVE_REGIONS (MAX_NUMNODES*50)
    #else
      /* By default, allow up to 256 distinct regions */
    #define MAX_ACTIVE_REGIONS 256

Since our memory is mostly contiguous it seems reasonable to keep this
at 256 for now. I also set 32bit to 32 to save space (is there any chance
a 32bit system will have more than 32 discontiguous memory ranges?).

Even with that fixed we have a few data structures that grow:

< 896   bootmem_node_data
> 14336 bootmem_node_data

< 1280  node_devices
> 20480 node_devices

< 25088 kmalloc_caches
> 59648 kmalloc_caches

< 1632  hstates
> 21792 hstates
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Bye-bye Performance Counters, welcome Performance Events!

In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.

Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.

All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)

The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.

Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.

User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)

This patch has been generated via the following script:

  FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')

  sed -i \
    -e 's/PERF_EVENT_/PERF_RECORD_/g' \
    -e 's/PERF_COUNTER/PERF_EVENT/g' \
    -e 's/perf_counter/perf_event/g' \
    -e 's/nb_counters/nb_events/g' \
    -e 's/swcounter/swevent/g' \
    -e 's/tpcounter_event/tp_event/g' \
    $FILES

  for N in $(find . -name perf_counter.[ch]); do
    M=$(echo $N | sed 's/perf_counter/perf_event/g')
    mv $N $M
  done

  FILES=$(find . -name perf_event.*)

  sed -i \
    -e 's/COUNTER_MASK/REG_MASK/g' \
    -e 's/COUNTER/EVENT/g' \
    -e 's/\<event\>/event_id/g' \
    -e 's/counter/event/g' \
    -e 's/Counter/Event/g' \
    $FILES

... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.

Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.

( NOTE: 'counters' are still the proper terminology when we deal
  with hardware registers - and these sed scripts are a bit
  over-eager in renaming them. I've undone some of that, but
  in case there's something left where 'counter' would be
  better than 'event' we can undo that on an individual basis
  instead of touching an otherwise nicely automated patch. )
Suggested-by: NStephane Eranian <eranian@google.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: NBecky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This contains all the bits that didn't fit in previous patches :-) This
includes the actual exception handlers assembly, the changes to the
kernel entry, other misc bits and wiring it all up in Kconfig.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The current definitions set ranges and defaults for 32 and 64-bit
only using "PPC_STD_MMU" which means hash based MMU. This uselessly
restrict the usefulness for the upcoming 64-bit BookE port, but more
than that, it's broken on 32-bit since the only 32-bit platform
supporting multiple page sizes currently is 44x which does -not-
have PPC_STD_MMU_32 set.

This fixes it by using PPC64 and PPC32 instead.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Now that percpu allows arbitrary embedding of the first chunk,
powerpc64 can easily be converted to dynamic percpu allocator.
Convert it.  powerpc supports several large page sizes.  Cap atom_size
at 1M.  There isn't much to gain by going above that anyway.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

Based on initial work from: Dale Farnsworth <dale@farnsworth.org>

Add the low level irq tracing hooks for 32-bit powerpc needed
to enable full lockdep functionality.

The approach taken to deal with the code in entry_32.S is that
we don't trace all the transitions of MSR:EE when we just turn
it off to peek at TI_FLAGS without races. Only when we are
calling into C code or returning from exceptions with a state
that have changed from what lockdep thinks.

There's a little bugger though: If we take an exception that
keeps interrupts enabled (such as an alignment exception) while
interrupts are enabled, we will call trace_hardirqs_on() on the
way back spurriously. Not a big deal, but to get rid of it would
require remembering in pt_regs that the exception was one of the
type that kept interrupts enabled which we don't know at this
stage. (Well, we could test all cases for regs->trap but that
sucks too much).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Tested-by: NKumar Gala <galak@kernel.crashing.org>

This patch makes most !CONFIG_HAVE_SETUP_PER_CPU_AREA archs use
dynamic percpu allocator.  The first chunk is allocated using
embedding helper and 8k is reserved for modules.  This ensures that
the new allocator behaves almost identically to the original allocator
as long as static percpu variables are concerned, so it shouldn't
introduce much breakage.

s390 and alpha use custom SHIFT_PERCPU_PTR() to work around addressing
range limit the addressing model imposes.  Unfortunately, this breaks
if the address is specified using a variable, so for now, the two
archs aren't converted.

The following architectures are affected by this change.

* sh
* arm
* cris
* mips
* sparc(32)
* blackfin
* avr32
* parisc (broken, under investigation)
* m32r
* powerpc(32)

As this change makes the dynamic allocator the default one,
CONFIG_HAVE_DYNAMIC_PER_CPU_AREA is replaced with its invert -
CONFIG_HAVE_LEGACY_PER_CPU_AREA, which is added to yet-to-be converted
archs.  These archs implement their own setup_per_cpu_areas() and the
conversion is not trivial.

* powerpc(64)
* sparc(64)
* ia64
* alpha
* s390

Boot and batch alloc/free tests on x86_32 with debug code (x86_32
doesn't use default first chunk initialization).  Compile tested on
sparc(32), powerpc(32), arm and alpha.

Kyle McMartin reported that this change breaks parisc.  The problem is
still under investigation and he is okay with pushing this patch
forward and fixing parisc later.

[ Impact: use dynamic allocator for most archs w/o custom percpu setup ]
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Bryan Wu <cooloney@kernel.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Matthew Wilcox <matthew@wil.cx>
Cc: Grant Grundler <grundler@parisc-linux.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>

This enables the perf_counter subsystem on 32-bit powerpc.  Since we
don't have any support for hardware counters on 32-bit powerpc yet,
only software counters can be used.

Besides selecting HAVE_PERF_COUNTERS for 32-bit powerpc as well as
64-bit, the main thing this does is add an implementation of
set_perf_counter_pending().  This needs to arrange for
perf_counter_do_pending() to be called when interrupts are enabled.
Rather than add code to local_irq_restore as 64-bit does, the 32-bit
set_perf_counter_pending() generates an interrupt by setting the
decrementer to 1 so that a decrementer interrupt will become pending
in 1 or 2 timebase ticks (if a decrementer interrupt isn't already
pending).  When interrupts are enabled, timer_interrupt() will be
called, and some new code in there calls perf_counter_do_pending().
We use a per-cpu array of flags to indicate whether we need to call
perf_counter_do_pending() or not.

This introduces a couple of new Kconfig symbols: PPC_HAVE_PMU_SUPPORT,
which is selected by processor families for which we have hardware PMU
support (currently only PPC64), and PPC_PERF_CTRS, which enables the
powerpc-specific perf_counter back-end.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: linuxppc-dev@ozlabs.org
Cc: benh@kernel.crashing.org
LKML-Reference: <19000.55404.103840.393470@cargo.ozlabs.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This makes 32-bit powerpc use the generic atomic64_t implementation.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently we are wasting time calling the generic calibrate_delay()
function. We don't need it since our implementation of __delay() is
based on the CPU timebase. So instead, we use our own small
implementation that initializes loops_per_jiffy to something sensible
to make the few users like spinlock debug be happy
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This patch includes the basic infrastructure to use swiotlb
bounce buffering on 32-bit powerpc.  It is not yet enabled on
any platforms.  Probably the most interesting bit is the
addition of addr_needs_map to dma_ops - we need this as
a dma_op because the decision of whether or not an addr
can be mapped by a device is device-specific.
Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org>
Acked-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The implementation we just revived has issues, such as using a
Kconfig-defined virtual address area in kernel space that nothing
actually carves out (and thus will overlap whatever is there),
or having some dependencies on being self contained in a single
PTE page which adds unnecessary constraints on the kernel virtual
address space.

This fixes it by using more classic PTE accessors and automatically
locating the area for consistent memory, carving an appropriate hole
in the kernel virtual address space, leaving only the size of that
area as a Kconfig option. It also brings some dma-mask related fixes
from the ARM implementation which was almost identical initially but
grew its own fixes.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

This reverts commit 33f00dce.

    While it was a good idea to try to use the mm/vmalloc.c allocator instead
    of our own (in fact, ours is itself a dup on an old variant of the vmalloc
    one), unfortunately, the approach is terminally busted since
    dma_alloc_coherent() can be called at interrupt time or in atomic contexts
    and there's little chances we'll make the code in mm/vmalloc.c cope with\       that :-(

    Until we can get the generic code to forbid that idiocy and fix all
    drivers abusing it, we pretty much have no choice but revert to
    our custom virtual space allocator.

    There's also a problem with SMP safety since freeing such mapping
    would require an IPI which cannot be done at interrupt time.

    However, right now, I don't think we support any platform that is
    both SMP and has non-coherent DMA (don't laugh, I know such things
    do exist !) so we can sort that out later.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

So select GENERIC_HARDIRQS_NO__DO_IRQ to disable it.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The powerpc kernel always requires an Open Firmware like device tree
to supply device information.  On systems without OF, this comes from
a flattened device tree blob.  This blob is usually generated by dtc,
a tool which compiles a text description of the device tree into the
flattened format used by the kernel.  Sometimes, the bootwrapper makes
small changes to the pre-compiled device tree blob (e.g. filling in
the size of RAM).  To do this it uses the libfdt library.

Because these are only used on powerpc, the code for both these tools
is included under arch/powerpc/boot (these were imported and are
periodically updated from the upstream dtc tree).

However, the microblaze architecture, currently being prepared for
merging to mainline also uses dtc to produce device tree blobs.  A few
other archs have also mentioned some interest in using dtc.
Therefore, this patch moves dtc and libfdt from arch/powerpc into
scripts, where it can be used by any architecture.

The vast bulk of this patch is a literal move, the rest is adjusting
the various Makefiles to use dtc and libfdt correctly from their new
locations.
Signed-off-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that shmem's divisions by zero and SHMEM_MAX_BYTES are fixed,
let powerpc 256kB pages coexist with CONFIG_SHMEM again.
Signed-off-by: NHugh Dickins <hugh@veritas.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

commit 28794d34 ("powerpc/kconfig: Kill
PPC_MULTIPLATFORM") broke KEXEC, by making it dependent on BOOK3S, while it
should be PPC_BOOK3S.
Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

CONFIG_DEBUG_PAGEALLOC is now supported by x86, powerpc, sparc64, and
s390.  This patch implements it for the rest of the architectures by
filling the pages with poison byte patterns after free_pages() and
verifying the poison patterns before alloc_pages().

This generic one cannot detect invalid page accesses immediately but
invalid read access may cause invalid dereference by poisoned memory and
invalid write access can be detected after a long delay.
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The recent addition of CONFIG_LOWMEM_CAM_BOOL and
CONFIG_LOWMEM_CAM_NUM cause the latter to show up in configs
that do not need it during 'make oldconfig'.  Make LOWMEM_CAM_NUM
depend on FSL_BOOKE.
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't
really meaningful anymore. It was basically equivalent to PPC64 || 6xx.

This removes it along with the following changes:

 - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely
   on 6xx which is what they want anyway.

 - A new symbol, PPC_BOOK3S, is defined that represent compliance with
   the "Server" variant of the architecture. This is set when either 6xx
   or PPC64 is set and open the door for future BOOK3E 64-bit.

 - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use
   PPC64 && PPC_BOOK3S

 - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now
   used to control the use of prom_init.c
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>