- 26 8月, 2013 28 次提交
-
-
由 Ian Abbott 提交于
`bonding_attach()` is the comedi "attach" handler for the driver. Any non-negative return value is treated as successful, but 0 is the preferred return value on success. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ian Abbott 提交于
Change `do_dev_config()` to return an error code on failure and 0 on success, instead of 0 on failure and 1 on success. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ian Abbott 提交于
The `char file[]` variable in `do_dev_config()` doesn't need to be initialized as it gets overwritten with a `snprintf()`. It just needs to be long enough. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ian Abbott 提交于
Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ian Abbott 提交于
Omit the fanciful prose from the MODULE_DESCRIPTION() line and combine concantenated string literals. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Ian Abbott 提交于
Reformat some comments according to CodingStyle and remove some comments inherited from the comedi 'skel' example driver. Signed-off-by: NIan Abbott <abbotti@mev.co.uk> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Chen Gang 提交于
DGNC is based on PCI, so need add related dependency, or when compiled with PCI disabled, it will be fail. The related error (randconfig for PCI disabled under s390): drivers/staging/dgnc/dgnc_cls.c:1394:2: error: implicit declaration of function ‘ioremap’ [-Werror=implicit-function-declaration] drivers/staging/dgnc/dgnc_cls.c:1407:3: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration] Cc: Lidza Louina <lidza.louina@gmail.com> Signed-off-by: NChen Gang <gang.chen@asianux.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Masanari Iida 提交于
Correct spelling typo in comments and debug messages. Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 navin patidar 提交于
struct pt_regs pointer is no longer passed as a irq handler argument. and also remove unnecessary macros. Signed-off-by: Nnavin patidar <navinp@cdac.in> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rupesh Gujare 提交于
Max. TX frame size supported is changed to 760 bytes. Signed-off-by: NRupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rupesh Gujare 提交于
Make sure that we return negative value if oz_build_frame() returns NULL. Signed-off-by: NRupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rupesh Gujare 提交于
We have icreased interrupt end point buffer size to 512 bytes, Change variable data type to accomodate it. Signed-off-by: NRupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rupesh Gujare 提交于
Increase interrupt end point buffer size & convert hard coded value to macro for better readability. Signed-off-by: NRupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rupesh Gujare 提交于
Use macro instead of hard coded value for readability. Signed-off-by: NRupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rupesh Gujare 提交于
Check for valid config number before completing set interface. Signed-off-by: NRupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
Only one of vnt_rts*/vnt_cts* structures are accessed at any one time. Join these structures in to a single union. These will eventually form the tail structure of vnt_tx_buffer and include structures vnt_tx_datahead* Structures in s_vFillCTSHead will join in next patch series. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
Parse out vnt_rts_a_fb code to new function vnt_rxtx_rts_a_fb_head. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
Parse out vnt_rts_ab code to new function vnt_rxtx_rts_ab_head. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
Parse out vnt_rts_g_fb code to new function vnt_rxtx_rts_g_fb_head. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
Parse out vnt_rts_g code to new function vnt_rxtx_rts_g_head. Also create a new common calling function vnt_fill_ieee80211_rts to fill the ieee80211_rts structure. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
If pvRrvTime is NULL the whole structure is NULL, so remove if statements and consolidate to single return. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
As result of patch vt6656: rxtx.c s_vFillCTSHead remove dead code bDisCRC bDisCRC is unused. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
As result of patch vt6656: device.h Remove dead code bSoftwareGenCrcErr. dDiscCRC is unused. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
As result of patch vt6656: device.h Remove dead code bSoftwareGenCrcErr. dDiscCRC is unused. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
Probably an error in earlier firmware is never enabled so remove. bPacketToWirelessUsb remove dead if/else and variables. Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Larry Finger 提交于
This driver has some global names that are the same as found in driver r8712. Fix the allyesconfig build errors by changing the names of those routines. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Larry Finger 提交于
Kernel code need not test for KERNELVERSION. Besides being unnecessary for an in-kernel driver, these lines will cause a build failure for any source tree with a stale include/linux/version.h. This patch is only compile tested. Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 25 8月, 2013 6 次提交
-
-
由 Greg Kroah-Hartman 提交于
Move to use the DEVICE_ATTR_RW/RO macros, making it easier to audit the sysfs file permissions, and get rid of the "empty" callback for read-only files, saving lines of code. Cc: Stefan Hajnoczi <stefanha@gmail.com> Cc: Laurent Navet <laurent.navet@gmail.com> Cc: Johannes Thumshirn <morbidrsa@googlemail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Use the default DEVICE_ATTR_RO/RW macros to specify the file permissions better, and make them easier to audit. And did we really want any user to be able to write to this file, I kind of doubt it... Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Toshi Kani <toshi.kani@hp.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Use the DEVICE_ATTR_RW() macro to be clearer as to the permissions for the sysfs file, making it easier to audit the code. Cc: Al Cho <acho@novell.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
Use the DEVICE_ATTR_RO/RW macros to better describe the permissions on the file, and make them easier to audit. Cc: David Täht <d@teklibre.com> Cc: Sara Bird <sara.bird.iar@gmail.com> Cc: Masanari Iida <standby24x7@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
The sysfs file for the driver was being created _after_ the device was announced to userspace, causing a race with any tools looking for sysfs files. Fix the race by using the default attribute group for the class. Cc: Kees Cook <keescook@chromium.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Greg Kroah-Hartman 提交于
The sysfs file in this driver is showing a raft of debugging values, none of which belong in sysfs, let alone in a single sysfs file. If these really need to be described somewhere, they should go into debugfs. For now, just delete the sysfs file, which removes a bunch of files from the tree. Cc: Henk de Groot <pe1dnn@amsat.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 8月, 2013 6 次提交
-
-
由 Geert Uytterhoeven 提交于
On 32-bit m68k, I get lots of warnings like: warning: integer constant is too large for ‘long’ type Switch the L*_POISON definitions from too-large constants and casts to the proper constant types to fix this. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rupesh Gujare 提交于
This patch fixes Kernel Documentation style. Signed-off-by: NRupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rupesh Gujare 提交于
schedule_work() returns true if succeeded & false on failure, error check was doing exactly reverse. Also removes extra variable. Signed-off-by: NRupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Rupesh Gujare 提交于
As we are initialising structure, we do not require memset(). Signed-off-by: NRupesh Gujare <rupesh.gujare@atmel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
Replace the pointer offsets with structure of mic_hdr with endian conversion where needed. Replace vFillTxKey argument u8 *pMICHDR with struct vnt_mic_hdr *mic_hdr and fix type of calling functions. An extra check that mic_hdr is not NULL Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Malcolm Priestley 提交于
To new structure. typedef struct tagSMICHDRHead -> struct vnt_mic_hdr This is only needed by rxtc.c so moved to rxtx.h The new structure is the same size as the old but contains the members as pointer referenced in rxtx.c s_vFillTxKey u8 id *pMICHDR = 0x59; u8 tx_priority; *((u8 *)(pMICHDR+1)) = 0; // TxPriority u8 mic_addr2[6]; memcpy(pMICHDR+2, &(pMACHeader->addr2[0]), 6); __be32 tsc_47_16; pMICHDR+8 = HIBYTE(HIWORD(pTransmitKey->dwTSC47_16)); pMICHDR+9 = LOBYTE(HIWORD(pTransmitKey->dwTSC47_16)); pMICHDR+10 = HIBYTE(LOWORD(pTransmitKey->dwTSC47_16)); pMICHDR+11 = LOBYTE(LOWORD(pTransmitKey->dwTSC47_16)); __be16 tsc_15_0; pMICHDR+12 = HIBYTE(pTransmitKey->wTSC15_0); pMICHDR+13 = LOBYTE(pTransmitKey->wTSC15_0); __be16 payload_len; pMICHDR+14 = HIBYTE(wPayloadLen); pMICHDR+15 = LOBYTE(wPayloadLen); __be16 hlen; pMICHDR+16 = 0; // HLEN[15:8] pMICHDR+17 = 28; // HLEN[7:0] __le16 frame_control; memcpy(pMICHDR+18, (u8 *)&wValue, 2); // MSKFRACTL u8 addr1[6]; memcpy(pMICHDR+20, &(pMACHeader->addr1[0]), 6); u8 addr2[6]; memcpy(pMICHDR+26, &(pMACHeader->addr2[0]), 6); u8 addr3[6]; memcpy(pMICHDR+32, &(pMACHeader->addr3[0]), 6); __le16 seq_ctrl; memcpy(pMICHDR+38, (u8 *)&wValue, 2); // MSKSEQCTL u8 addr4[6]; memcpy(pMICHDR+40, &(pMACHeader->addr4[0]), 6); u16 packing; /* packing to 48 bytes */ Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-