Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 28 5月, 2013 2 次提交
    • L
      ext4: make punch hole code path work with bigalloc · d23142c6
      由 Lukas Czerner 提交于 
      Currently punch hole is disabled in file systems with bigalloc
feature enabled. However the recent changes in punch hole patch should
make it easier to support punching holes on bigalloc enabled file
systems.

This commit changes partial_cluster handling in ext4_remove_blocks(),
ext4_ext_rm_leaf() and ext4_ext_remove_space(). Currently
partial_cluster is unsigned long long type and it makes sure that we
will free the partial cluster if all extents has been released from that
cluster. However it has been specifically designed only for truncate.

With punch hole we can be freeing just some extents in the cluster
leaving the rest untouched. So we have to make sure that we will notice
cluster which still has some extents. To do this I've changed
partial_cluster to be signed long long type. The only scenario where
this could be a problem is when cluster_size == block size, however in
that case there would not be any partial clusters so we're safe. For
bigger clusters the signed type is enough. Now we use the negative value
in partial_cluster to mark such cluster used, hence we know that we must
not free it even if all other extents has been freed from such cluster.

This scenario can be described in simple diagram:

|FFF...FF..FF.UUU|
 ^----------^
  punch hole

. - free space
| - cluster boundary
F - freed extent
U - used extent

Also update respective tracepoints to use signed long long type for
partial_cluster.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      d23142c6
    • L
      ext4: update ext4_ext_remove_space trace point · 61801325
      由 Lukas Czerner 提交于 
      Add "end" variable.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
      61801325
  3. 22 5月, 2013 2 次提交
  5. 03 5月, 2013 1 次提交
    • Y
      ext4: fix fio regression · e30b5dca
      由 Yan, Zheng 提交于 
      We (Linux Kernel Performance project) found a regression introduced
by commit:

  f7fec032 ext4: track all extent status in extent status tree

The commit causes about 20% performance decrease in fio random write
test. Profiler shows that rb_next() uses a lot of CPU time. The call
stack is:

  rb_next
  ext4_es_find_delayed_extent
  ext4_map_blocks
  _ext4_get_block
  ext4_get_block_write
  __blockdev_direct_IO
  ext4_direct_IO
  generic_file_direct_write
  __generic_file_aio_write
  ext4_file_write
  aio_rw_vect_retry
  aio_run_iocb
  do_io_submit
  sys_io_submit
  system_call_fastpath
  io_submit
  td_io_getevents
  io_u_queued_complete
  thread_main
  main
  __libc_start_main

The cause is that ext4_es_find_delayed_extent() doesn't have an
upper bound, it keeps searching until a delayed extent is found.
When there are a lots of non-delayed entries in the extent state
tree, ext4_es_find_delayed_extent() may uses a lot of CPU time.
Reported-by: NLKP project <lkp@linux.intel.com>
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NZheng Liu <wenqing.lz@taobao.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
      e30b5dca
  7. 30 4月, 2013 2 次提交
  9. 29 4月, 2013 1 次提交
  11. 27 4月, 2013 1 次提交
  13. 24 4月, 2013 1 次提交
    • F
      nohz: Fix unavailable tick_stop tracepoint in dynticks idle · 2c82d1be
      由 Frederic Weisbecker 提交于 
      The trace_tick_stop() tracepoint is only available in full
dynticks. But it's also used by dynticks-idle so let's build
it for the latter config as well.

This fixes:

     kernel/time/tick-sched.c: In function tick_nohz_stop_sched_tick:
     kernel/time/tick-sched.c:644: error: implicit declaration of function trace_tick_stop
     make[2]: *** [kernel/time/tick-sched.o] Erreur 1
Reported-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Gilad Ben Yossef <gilad@benyossef.com>
Cc: Hakan Akkan <hakanakkan@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Li Zhong <zhong@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
      2c82d1be
  15. 23 4月, 2013 8 次提交
  17. 22 4月, 2013 3 次提交
  19. 19 4月, 2013 1 次提交
  21. 13 4月, 2013 1 次提交
  23. 12 4月, 2013 1 次提交
    • T
      kthread: Prevent unpark race which puts threads on the wrong cpu · f2530dc7
      由 Thomas Gleixner 提交于 
      The smpboot threads rely on the park/unpark mechanism which binds per
cpu threads on a particular core. Though the functionality is racy:

CPU0	       	 	CPU1  	     	    CPU2
unpark(T)				    wake_up_process(T)
  clear(SHOULD_PARK)	T runs
			leave parkme() due to !SHOULD_PARK  
  bind_to(CPU2)		BUG_ON(wrong CPU)						    

We cannot let the tasks move themself to the target CPU as one of
those tasks is actually the migration thread itself, which requires
that it starts running on the target cpu right away.

The solution to this problem is to prevent wakeups in park mode which
are not from unpark(). That way we can guarantee that the association
of the task to the target cpu is working correctly.

Add a new task state (TASK_PARKED) which prevents other wakeups and
use this state explicitly for the unpark wakeup.

Peter noticed: Also, since the task state is visible to userspace and
all the parked tasks are still in the PID space, its a good hint in ps
and friends that these tasks aren't really there for the moment.

The migration thread has another related issue.

CPU0	      	     	 CPU1
Bring up CPU2
create_thread(T)
park(T)
 wait_for_completion()
			 parkme()
			 complete()
sched_set_stop_task()
			 schedule(TASK_PARKED)

The sched_set_stop_task() call is issued while the task is on the
runqueue of CPU1 and that confuses the hell out of the stop_task class
on that cpu. So we need the same synchronizaion before
sched_set_stop_task().
Reported-by: NDave Jones <davej@redhat.com>
Reported-and-tested-by: NDave Hansen <dave@sr71.net>
Reported-and-tested-by: NBorislav Petkov <bp@alien8.de>
Acked-by: NPeter Ziljstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: dhillf@gmail.com
Cc: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1304091635430.21884@ionosSigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      f2530dc7
  25. 10 4月, 2013 1 次提交
  27. 04 4月, 2013 1 次提交
  29. 02 4月, 2013 1 次提交
    • T
      writeback: replace custom worker pool implementation with unbound workqueue · 839a8e86
      由 Tejun Heo 提交于 
      Writeback implements its own worker pool - each bdi can be associated
with a worker thread which is created and destroyed dynamically.  The
worker thread for the default bdi is always present and serves as the
"forker" thread which forks off worker threads for other bdis.

there's no reason for writeback to implement its own worker pool when
using unbound workqueue instead is much simpler and more efficient.
This patch replaces custom worker pool implementation in writeback
with an unbound workqueue.

The conversion isn't too complicated but the followings are worth
mentioning.

* bdi_writeback->last_active, task and wakeup_timer are removed.
  delayed_work ->dwork is added instead.  Explicit timer handling is
  no longer necessary.  Everything works by either queueing / modding
  / flushing / canceling the delayed_work item.

* bdi_writeback_thread() becomes bdi_writeback_workfn() which runs off
  bdi_writeback->dwork.  On each execution, it processes
  bdi->work_list and reschedules itself if there are more things to
  do.

  The function also handles low-mem condition, which used to be
  handled by the forker thread.  If the function is running off a
  rescuer thread, it only writes out limited number of pages so that
  the rescuer can serve other bdis too.  This preserves the flusher
  creation failure behavior of the forker thread.

* INIT_LIST_HEAD(&bdi->bdi_list) is used to tell
  bdi_writeback_workfn() about on-going bdi unregistration so that it
  always drains work_list even if it's running off the rescuer.  Note
  that the original code was broken in this regard.  Under memory
  pressure, a bdi could finish unregistration with non-empty
  work_list.

* The default bdi is no longer special.  It now is treated the same as
  any other bdi and bdi_cap_flush_forker() is removed.

* BDI_pending is no longer used.  Removed.

* Some tracepoints become non-applicable.  The following TPs are
  removed - writeback_nothread, writeback_wake_thread,
  writeback_wake_forker_thread, writeback_thread_start,
  writeback_thread_stop.

Everything, including devices coming and going away and rescuer
operation under simulated memory pressure, seems to work fine in my
test setup.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
      839a8e86
  31. 26 3月, 2013 2 次提交
  33. 24 3月, 2013 2 次提交
  35. 18 3月, 2013 1 次提交
  37. 15 3月, 2013 6 次提交
    • S
      tracing: Add a way to soft disable trace events · 417944c4
      由 Steven Rostedt (Red Hat) 提交于 
      In order to let triggers enable or disable events, we need a 'soft'
method for doing so. For example, if a function probe is added that
lets a user enable or disable events when a function is called, that
change must be done without taking locks or a mutex, and definitely
it can't sleep. But the full enabling of a tracepoint is expensive.

By adding a 'SOFT_DISABLE' flag, and converting the flags to be updated
without the protection of a mutex (using set/clear_bit()), this soft
disable flag can be used to allow critical sections to enable or disable
events from being traced (after the event has been placed into "SOFT_MODE").

Some caveats though: The comm recorder (to map pids with a comm) can not
be soft disabled (yet). If you disable an event with with a "soft"
disable and wait a while before reading the trace, the comm cache may be
replaced and you'll get a bunch of <...> for comms in the trace.

Reading the "enable" file for an event that is disabled will now give
you "0*" where the '*' denotes that the tracepoint is still active but
the event itself is "disabled".

[ fixed _BIT used in & operation : thanks to Dan Carpenter and smatch ]

Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      417944c4
    • L
      tracing: Fix some section mismatch warnings · 523c8113
      由 Li Zefan 提交于 
      As we've added __init annotation to field-defining functions, we should
add __refdata annotation to event_call variables, which reference those
functions.

Link: http://lkml.kernel.org/r/51343C1F.2050502@huawei.comReported-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      523c8113
    • L
      tracing: Annotate event field-defining functions with __init · 7e4f44b1
      由 Li Zefan 提交于 
      Those functions are called either during kernel boot or module init.

Before:

$ dmesg | grep 'Freeing unused kernel memory'
Freeing unused kernel memory: 1208k freed
Freeing unused kernel memory: 1360k freed
Freeing unused kernel memory: 1960k freed

After:

$ dmesg | grep 'Freeing unused kernel memory'
Freeing unused kernel memory: 1236k freed
Freeing unused kernel memory: 1388k freed
Freeing unused kernel memory: 1960k freed

Link: http://lkml.kernel.org/r/5125877D.5000201@huawei.comSigned-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      7e4f44b1
    • L
      tracing: Add a helper function for event print functions · f71130de
      由 Li Zefan 提交于 
      Move duplicate code in event print functions to a helper function.

This shrinks the size of the kernel by ~13K.

   text    data     bss     dec     hex filename
6596137 1743966 10138672        18478775        119f6b7 vmlinux.o.old
6583002 1743849 10138672        18465523        119c2f3 vmlinux.o.new

Link: http://lkml.kernel.org/r/51258746.2060304@huawei.comSigned-off-by: NLi Zefan <lizefan@huawei.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      f71130de
    • S
      tracing: Pass the ftrace_file to the buffer lock reserve code · ccb469a1
      由 Steven Rostedt 提交于 
      Pass the struct ftrace_event_file *ftrace_file to the
trace_event_buffer_lock_reserve() (new function that replaces the
trace_current_buffer_lock_reserver()).

The ftrace_file holds a pointer to the trace_array that is in use.
In the case of multiple buffers with different trace_arrays, this
allows different events to be recorded into different buffers.

Also fixed some of the stale comments in include/trace/ftrace.h
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      ccb469a1
    • S
      tracing: Separate out trace events from global variables · ae63b31e
      由 Steven Rostedt 提交于 
      The trace events for ftrace are all defined via global variables.
The arrays of events and event systems are linked to a global list.
This prevents multiple users of the event system (what to enable and
what not to).

By adding descriptors to represent the event/file relation, as well
as to which trace_array descriptor they are associated with, allows
for more than one set of events to be defined. Once the trace events
files have a link between the trace event and the trace_array they
are associated with, we can create multiple trace_arrays that can
record separate events in separate buffers.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
      ae63b31e
  39. 04 3月, 2013 1 次提交
  41. 01 3月, 2013 1 次提交
    • T
      ext4: optimize ext4_es_shrink() · 24630774
      由 Theodore Ts'o 提交于 
      When the system is under memory pressure, ext4_es_srhink() will get
called very often.  So optimize returning the number of items in the
file system's extent status cache by keeping a per-filesystem count,
instead of calculating it each time by scanning all of the inodes in
the extent status cache.

Also rename the slab used for the extent status cache to be
"ext4_extent_status" so it's obviousl the slab in question is created
by ext4.
Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu>
Cc: Zheng Liu <gnehzuil.liu@gmail.com>
      24630774