- 01 1月, 2008 2 次提交
-
-
由 Richard Purdie 提交于
Fix locomo-leds to use the correct struct device to prevent an oops. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
由 Richard Purdie 提交于
Covert leds_list_lock to a rw_sempahore to match previous LED trigger locking fixes, fixing lock ordering. Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
-
- 30 12月, 2007 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SERIAL]: Fix section mismatches in Sun serial console drivers.
-
由 Dave Young 提交于
Because of workqueue delay, the put_device could be called before device_del, so move it to del_conn. Signed-off-by: Dave Young <hidave.darkstar@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gavin McCullagh 提交于
When a delayed ACK representing two packets arrives, there are two RTT samples available, one for each packet. The first (in order of seq number) will be artificially long due to the delay waiting for the second packet, the second will trigger the ACK and so will not itself be delayed. According to rfc1323, the SRTT used for RTO calculation should use the first rtt, so receivers echo the timestamp from the first packet in the delayed ack. For congestion control however, it seems measuring delayed ack delay is not desirable as it varies independently of congestion. The patch below causes seq_rtt and last_ackt to be updated with any available later packet rtts which should have less (and hopefully zero) delack delay. The rtt value then gets passed to ca_ops->pkts_acked(). Where TCP_CONG_RTT_STAMP was set, effort was made to supress RTTs from within a TSO chunk (!fully_acked), using only the final ACK (which includes any TSO delay) to generate RTTs. This patch removes these checks so RTTs are passed for each ACK to ca_ops->pkts_acked(). For non-delay based congestion control (cubic, h-tcp), rtt is sometimes used for rtt-scaling. In shortening the RTT, this may make them a little less aggressive. Delay-based schemes (eg vegas, veno, illinois) should get a cleaner, more accurate congestion signal, particularly for small cwnds. The congestion control module can potentially also filter out bad RTTs due to the delayed ack alarm by looking at the associated cnt which (where delayed acking is in use) should probably be 1 if the alarm went off or greater if the ACK was triggered by a packet. Signed-off-by: NGavin McCullagh <gavin.mccullagh@nuim.ie> Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 12月, 2007 3 次提交
-
-
由 David S. Miller 提交于
We're exporting an __init function, oops :-) The core issue here is that add_preferred_console() is marked as __init, this makes it impossible to invoke this thing from a driver probe routine which is what the Sparc serial drivers need to do. There is no harm in dropping the __init marker. This code will actually work properly when invoked from a modular driver, except that init will probably not pick up the console change without some other support code. Then we can drop the __init from sunserial_console_match() and we're no longer exporting an __init function to modules. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Simon Horman 提交于
David Brownell pointed out a regression in my recent "Fix ip command line processing" patch. It turns out to be a fairly blatant oversight on my part whereby ic_enable is never set, and thus autoconfiguration is never enabled. Clearly my testing was broken :-( The solution that I have is to set ic_enable to 1 if we hit ip_auto_config_setup(), which basically means that autoconfiguration is activated unless told otherwise. I then flip ic_enable to 0 if ip=off, ip=none, ip=::::::off or ip=::::::none using ic_proto_name(); The incremental patch is below, let me know if a non-incremental version is prepared, as I did as for the original patch to be reverted pending a fix. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] PS3: Fix printing of os-area magic numbers [POWERPC] Oprofile: Remove dependency on spufs module
-
- 28 12月, 2007 5 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: [CRYPTO] padlock: Fix spurious ECB page fault
-
由 Linus Torvalds 提交于
It appears that some PCI-E bridges do the wrong thing in the presense of CRS Software Visibility and MMCONFIG. In particular, it looks like an ATI bridge (device ID 7936) will return 0001 in the vendor ID field of any bridged devices indefinitely. Not enabling CRS SV avoids the problem, and as we currently do not really make good use of the feature anyway (we just time out rather than do any threaded discovery as suggested by the CRS specs), we're better off just not enabling it. This should fix a slew of problem reports with random devices (generally graphics adapters or fairly high-performance networking cards, since it only affected PCI-E) not getting properly recognized on these AMD systems. If we really want to use CRS-SV, we may end up eventually needing a whitelist of systems where this should be enabled, along with some kind of "pcibios_enable_crs()" query to call the system-specific code. Suggested-by: NLoic Prylli <loic@myri.com> Tested-by: NKai Ruhnau <kai@tragetaschen.dyndns.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Greg Kroah-Hartman <greg@kroah.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Geoff Levand 提交于
Fix a bug in the printing of the os-area magic numbers which assumed that magic numbers were zero terminated strings. The magic numbers are represented in memory as integers. If the os-area sections are not initialized correctly they could contained random data that would be printed to the display. Also unify the handling of header and db magic numbers and make both of type array of u8. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Bob Nelson 提交于
This removes an OProfile dependency on the spufs module. This dependency was causing a problem for multiplatform systems that are built with support for Oprofile on Cell but try to load the oprofile module on a non-Cell system. Signed-off-by: NBob Nelson <rrnelson@us.ibm.com> Signed-off-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Herbert Xu 提交于
The xcryptecb instruction always processes an even number of blocks so we need to ensure th existence of an extra block if we have to process an odd number of blocks. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 27 12月, 2007 11 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: [IPV4]: Fix ip command line processing. [VETH]: move veth.h to include/linux [NET] tc_nat: header install [TUNTAP]: Fix wrong debug message. [NETFILTER]: nf_conntrack_ipv4: fix module parameter compatibility mac80211: warn when receiving frames with unaligned data mac80211: round station cleanup timer
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Implement pci_resource_to_user()
-
由 Christoph Lameter 提交于
Did not fix the reported issue. Apart from other weirdness this causes a bad link between the TLB flushing logic and the quicklists. If there is indeed an issue that an arch needs a tlb flush before free then the arch code needs to set tlb->need_flush before calling quicklist_free. Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Simon Horman 提交于
Recently the documentation in Documentation/nfsroot.txt was update to note that in fact ip=off and ip=::::::off as the latter is ignored and the default (on) is used. This was certainly a step in the direction of reducing confusion. But it seems to me that the code ought to be fixed up so that ip=::::::off actually turns off ip autoconfiguration. This patch also notes more specifically that ip=on (aka ip=::::::on) is the default. Signed-off-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
Move veth.h from net/ to linux/ since it is a user api, and add it to user header processing Kbuild. [ Use header-y as suggested by Sam Ravnborg. -DaveM ] Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
iproute2 build needs tc_nat.h header from kernel make install_headers. Signed-off-by: NStephen Hemminger <stephen.hemminger@vyatta.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Toyo Abe 提交于
This is a trivial fix of debug message. When a persist flag is set, the message should say "enabled". Signed-off-by: NToyo Abe <tabe@miraclelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
Some users do "modprobe ip_conntrack hashsize=...". Since we have the module aliases this loads nf_conntrack_ipv4 and nf_conntrack, the hashsize parameter is unknown for nf_conntrack_ipv4 however and makes it fail. Allow to specify hashsize= for both nf_conntrack and nf_conntrack_ipv4. Note: the nf_conntrack message in the ringbuffer will display an incorrect hashsize since nf_conntrack is first pulled in as a dependency and calculates the size itself, then it gets changed through a call to nf_conntrack_set_hashsize(). Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Johannes Berg 提交于
This patch makes mac80211 warn (once) when the driver passes up a frame in which the payload data is not aligned on a four-byte boundary, with a long comment for people who run into the condition and need to know what to do. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Johannes Berg 提交于
The station cleanup timer runs every ten seconds, the exact timing is not relevant at all so it can well run together with other things to save power. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 David S. Miller 提交于
This makes libpciaccess able to mmap() resources of the device properly. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 12月, 2007 3 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: cmd64x: fix hwif->chipset setup MAINTAINERS: update ide-cd entry ide-cd: fix 'ireason' reporting in cdrom_pc_intr() ide-cd: fix error message in cdrom_pc_intr() ide-cd: add error message for DMA error to cdrom_read_intr() ide-cd: fix error messages in cdrom_write_intr() ide-cd: add missing 'ireason' masking to cdrom_write_intr() ide-cd: fix error messages in cdrom_{read,write}_check_ireason() ide-cd: use ide_cd_release() in ide_cd_probe() ide-cd: fix ACER/AOpen 24X CDROM speed reporting on big-endian machines ide-cd: fix SAMSUNG CD-ROM SCR-3231 quirk drivers/ide/: Spelling fixes
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb: V4L/DVB (6876): ivtv: mspx4xx needs a longer i2c udelay V4L/DVB (6871): Kconfig: VIDEO_CX23885 must select DVB_LGDT330X
-
由 Linus Torvalds 提交于
This reverts commit fbdcf18d. As pointed out by Yanmin Zhang, the problem was already fixed differently (and correctly), and rather than fix anything, it actually causes us to create a sub-optimal sched-domains hierarchy (not setting up the domain belonging to the core) when CONFIG_X86_HT=y. Requested-by: NYanmin Zhang <yanmin_zhang@linux.intel.com> Acked-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 24 12月, 2007 13 次提交
-
-
commit 528a572d ("ide: add ->chipset field to ide_pci_device_t") broke hwif->chipset setup (it is now set to ide_cmd646 for CMD648 instead of CMD646). It seems that the breakage happend while I was moving patches around (cmd64x_chipsets[] entries for CMD646 and CMD648 are identical except for 'name' field). Fix it and bump driver version. Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Borislav Petkov 提交于
Reopen ide-cd for maintainership. Signed-off-by: NBorislav Petkov <bbpetkov@yahoo.de> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Mask 'ireason' variable so only the valid interrupt reason bits will be reported on "drive appears confused" error. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Mask 'ireason' variable with 0x3 so the valid interrupt reason value is passed to cdrom_write_check_ireason() for checking. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
Use ide_cd_release() to do the cleanup if ide_cdrom_setup() fails. It fixes: - the default drive->dsc_overlap value not being restored - the default drive->queue's prep_rq_fn not being restored - struct gendisk 'g' not being freed - wrong function name being reported on unregister_cdrom() error Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
* Fix ACER/AOpen 24X CDROM speed reporting on big-endian machines by adding missing le16_to_cpu() calls. While at it: * Replace ntohs() by be16_to_cpu(). Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
cdi->mask is cleared by ide_cdrom_register() which is called after the quirk. Fix it by adding new ->no_speed_select flag to struct ide_cd_config_flags and using it in ide_cdrom_register() to set CDC_SELECT_SPEED flag. Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Cc: Andrew Morton <akpm@linux-foundation.org>, Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hverkuil@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab@infradead.org>
-