- 08 7月, 2011 1 次提交
-
-
由 Christoph Hellwig 提交于
Split the guts of xfs_itruncate_finish that loop over the existing extents and calls xfs_bunmapi on them into a new helper, xfs_itruncate_externs. Make xfs_attr_inactive call it directly instead of xfs_itruncate_finish, which allows to simplify the latter a lot, by only letting it deal with the data fork. As a result xfs_itruncate_finish is renamed to xfs_itruncate_data to make its use case more obvious. Also remove the sync parameter from xfs_itruncate_data, which has been unessecary since the introduction of the busy extent list in 2002, and completely dead code since 2003 when the XFS_BMAPI_ASYNC parameter was made a no-op. I can't actually see why the xfs_attr_inactive needs to set the transaction sync, but let's keep this patch simple and without changes in behaviour. Also avoid passing a useless argument to xfs_isize_check, and make it private to xfs_inode.c. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
- 08 4月, 2011 1 次提交
-
-
由 Christoph Hellwig 提交于
GCC 4.6 now warnings about variables set but not used. Fix the trivially fixable warnings of this sort. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 31 3月, 2011 1 次提交
-
-
由 Lucas De Marchi 提交于
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
-
- 07 3月, 2011 2 次提交
-
-
由 Dave Chinner 提交于
Once converted, kill the remainder of the cmn_err() interface. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Dave Chinner 提交于
Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 19 10月, 2010 4 次提交
-
-
由 Arkadiusz Mi?kiewicz 提交于
This patch adds support for 32bit project quota identifiers. On disk format is backward compatible with 16bit projid numbers. projid on disk is now kept in two 16bit values - di_projid_lo (which holds the same position as old 16bit projid value) and new di_projid_hi (takes existing padding) and converts from/to 32bit value on the fly. xfs_admin (for existing fs), mkfs.xfs (for new fs) needs to be used to enable PROJID32BIT support. Signed-off-by: NArkadiusz Miśkiewicz <arekm@maven.pl> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
由 Dave Chinner 提交于
When doing read side inode cache walks, the code to validate and grab an inode is common to all callers. Split it out of the execute callbacks in preparation for batching lookups. Similarly, split out the inode reference dropping from the execute callbacks into the main lookup look to be symmetric with the grab. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com>
-
由 Dave Chinner 提交于
The reclaim walk requires different locking and has a slightly different walk algorithm, so separate it out so that it can be optimised separately. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAlex Elder <aelder@sgi.com>
-
由 Dave Chinner 提交于
Under heavy multi-way parallel create workloads, the VFS struggles to write back all the inodes that have been changed in age order. The bdi flusher thread becomes CPU bound, spending 85% of it's time in the VFS code, mostly traversing the superblock dirty inode list to separate dirty inodes old enough to flush. We already keep an index of all metadata changes in age order - in the AIL - and continued log pressure will do age ordered writeback without any extra overhead at all. If there is no pressure on the log, the xfssyncd will periodically write back metadata in ascending disk address offset order so will be very efficient. Hence we can stop marking VFS inodes dirty during transaction commit or when changing timestamps during transactions. This will keep the inodes in the superblock dirty list to those containing data or unlogged metadata changes. However, the timstamp changes are slightly more complex than this - there are a couple of places that do unlogged updates of the timestamps, and the VFS need to be informed of these. Hence add a new function xfs_trans_ichgtime() for transactional changes, and leave xfs_ichgtime() for the non-transactional changes. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NAlex Elder <aelder@sgi.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 27 7月, 2010 4 次提交
-
-
由 Christoph Hellwig 提交于
xfs_truncate_file is only used for truncating quota files. Move it to xfs_qm_syscalls.c so it can be marked static and take advatange of the fact by removing the unused page cache validation and taking the iget into the helper. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
xfs_iput is just a small wrapper for xfs_iunlock + IRELE. Having this out of line wrapper means the trace events in those two can't track their caller properly. So just remove the wrapper and opencode the unlock + rele in the few callers. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Dmapi support was never merged upstream, but we still have a lot of hooks bloating XFS for it, all over the fast pathes of the filesystem. This patch drops over 700 lines of dmapi overhead. If we'll ever get HSM support in mainline at least the namespace events can be done much saner in the VFS instead of the individual filesystem, so it's not like this is much help for future work. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
- 21 7月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
Almost all identifiers use the FS_* namespace, so rename the missing few XFS_* ones to FS_* as well. Without this some people might get upset about having too many XFS names in generic code. Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 24 6月, 2010 1 次提交
-
-
由 Dave Chinner 提交于
The block number comes from bulkstat based inode lookups to shortcut the mapping calculations. We ar enot able to trust anything from bulkstat, so drop the block number as well so that the correct lookups and mappings are always done. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 23 6月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
The non-coherent bulkstat versionsthat look directly at the inode buffers causes various problems with performance optimizations that make increased use of just logging inodes. This patch makes bulkstat always use iget, which should be fast enough for normal use with the radix-tree based inode cache introduced a while ago. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
- 22 5月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
Pass the larger struct fs_disk_quota to the ->set_dqblk operation so that the Q_SETQUOTA and Q_XSETQUOTA operations can be implemented with a single filesystem operation and we can retire the ->set_xquota operation. The additional information (RT-subvolume accounting and warn counts) are left zero for the VFS quota implementation. Add new fieldmask values for setting the numer of blocks and inodes values which is required for the VFS quota, but wasn't for XFS. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 19 5月, 2010 5 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
Access fields in m_quotainfo directly instead of hiding them behind the XFS_QI_* macros. Add local variables for the quotainfo pointer in places where we have lots of them. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com>
-
由 Christoph Hellwig 提交于
The xfs_dqmarker structure does not need to exist anymore. Move the remaining flags field out of it and remove the structure altogether. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com>
-
由 Dave Chinner 提交于
Convert the dquot hash list on the filesystem to use listhead infrastructure rather than the roll-your-own in the quota code. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
由 Dave Chinner 提交于
Convert the dquot list on the filesytesm to use listhead infrastructure rather than the roll-your-own in the quota code. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 30 4月, 2010 1 次提交
-
-
由 Dave Chinner 提交于
On low memory boxes or those with highmem, kernel can OOM before the background reclaims inodes via xfssyncd. Add a shrinker to run inode reclaim so that it inode reclaim is expedited when memory is low. This is more complex than it needs to be because the VM folk don't want a context added to the shrinker infrastructure. Hence we need to add a global list of XFS mount structures so the shrinker can traverse them. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-
- 22 1月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
Remove the XFS_LOG_FORCE argument which was always set, and the XFS_LOG_URGE define, which was never used. Split xfs_log_force into a two helpers - xfs_log_force which forces the whole log, and xfs_log_force_lsn which forces up to the specified LSN. The underlying implementations already were entirely separate, as were the users. Also re-indent the new _xfs_log_force/_xfs_log_force which previously had a weird coding style. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 16 1月, 2010 1 次提交
-
-
由 Dave Chinner 提交于
Make the inode tree reclaim walk exclusive to avoid races with concurrent sync walkers and lookups. This is a version of a patch posted by Christoph Hellwig that avoids all the code duplication. Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 15 12月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 14 10月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
xfs_dqrele_inode calls xfs_iput to release the ilock and a reference and then also calls IRELE which does a second decrement of the reference count. This leads to a premature freeing of inodes when quotas were turned off while the filesystem was mounted. Thanks to Utako Kusaka for reporting the bug and provinding a good testcase. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reported-by: NUtako Kusaka <u-kusaka@wm.jp.nec.com> Reviewed-by: NAlex Elder <aelder@sgi.com> Signed-off-by: NAlex Elder <aelder@sgi.com>
-
- 10 6月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
This patch rips out the XFS ACL handling code and uses the generic fs/posix_acl.c code instead. The ondisk format is of course left unchanged. This also introduces the same ACL caching all other Linux filesystems do by adding pointers to the acl and default acl in struct xfs_inode. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
-
- 08 6月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Use xfs_inode_ag_iterator instead of opencoding the inode walk in the quota code. Mark xfs_inode_ag_iterator and xfs_sync_inode_valid non-static to allow using them from the quota code. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJosef 'Jeff' Sipek <jeffpc@josefsipek.net> Reviewed-by: NEric Sandeen <sandeen@sandeen.net>
-
- 29 3月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
People continue to complain about this for weird reasons, but there's really no point in keeping this typedef for a couple of users anyway. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NEric Sandeen <sandeen@sandeen.net> Reviewed-by: NFelix Blyakher <felixb@sgi.com>
-
- 09 2月, 2009 1 次提交
-
-
由 Christoph Hellwig 提交于
Currently we call from the nicely abstracted linux quotaops into a ugly multiplexer just to split the calls out at the same boundary again. Rewrite the quota ops handling to remove that obfucation. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDave Chinner <david@fromorbit.com>
-
- 10 11月, 2008 2 次提交
-
-
由 Dave Chinner 提交于
The radix tree walks in xfs_sync_inodes_ag and xfs_qm_dqrele_all_inodes() can find inodes that are still undergoing initialisation. Avoid them by checking for the the XFS_INEW() flag once we have a reference on the inode. This flag is cleared once the inode is properly initialised. SGI-PV: 987246 Signed-off-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Dave Chinner 提交于
gcc on ARM warns about an using an uninitialised variable in xfs_qm_dqrele_all_inodes(). This is a real bug, but gcc on x86_64 is not reporting this warning so it went unnoticed. Fix the bug by bring the inode radix tree walk code up to date with xfs_sync_inodes_ag(). SGI-PV: 987246 Signed-off-by: NDave Chinner <david@fromorbit.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 30 10月, 2008 3 次提交
-
-
由 David Chinner 提交于
Kill the unused arg in xfs_syncsub() and xfs_sync_inodes(). For callers of xfs_syncsub() that only want to flush inodes, replace xfs_syncsub() with direct calls to xfs_sync_inodes() as that is all that is being done with the specific flags being passed in. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32305a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
With the sync code relocated to the linux-2.6 directory we can use struct inodes directly. If we do the same thing for the quota release code, we can remove vn_grab altogether. While here, convert the VN_BAD() checks to is_bad_inode() so we can remove vnodes entirely from this code. SGI-PV: 988140 SGI-Modid: xfs-linux-melb:xfs-kern:32304a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
由 David Chinner 提交于
Make releasing all inode dquots traverse the per-ag inode radix trees rather than the mount inode list. This removes another user of the mount inode list. Version 3 o fix comment relating to avoiding trying to release the quota inodes and those in reclaim. Version 2 o add comment explaining use of gang lookups for a single inode o use IRELE, not VN_RELE o move check for ag initialisation to caller. SGI-PV: 988139 SGI-Modid: xfs-linux-melb:xfs-kern:32291a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org>
-
- 13 8月, 2008 2 次提交
-
-
由 Christoph Hellwig 提交于
All remaining bhv_vnode_t instance are in code that's more or less Linux specific. (Well, for xfs_acl.c that could be argued, but that code is on the removal list, too). So just do an s/bhv_vnode_t/struct inode/ over the whole tree. We can clean up variable naming and some useless helpers later. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31781a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 David Chinner 提交于
Replace XFS_ITOV_NULL() with the new VFS_I() inline. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31722a Signed-off-by: NDavid Chinner <david@fromorbit.com> Signed-off-by: NNiv Sardi <xaiki@sgi.com> Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
- 28 7月, 2008 2 次提交
-
-
由 Christoph Hellwig 提交于
SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31405a Signed-off-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NTim Shimmin <tes@sgi.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-
由 Denys Vlasenko 提交于
kmem_free() function takes (ptr, size) arguments but doesn't actually use second one. This patch removes size argument from all callsites. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31050a Signed-off-by: NDenys Vlasenko <vda.linux@googlemail.com> Signed-off-by: NDavid Chinner <dgc@sgi.com> Signed-off-by: NLachlan McIlroy <lachlan@sgi.com>
-