Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 25 10月, 2007 11 次提交
    • I
      sched: mark CONFIG_FAIR_GROUP_SCHED as !EXPERIMENTAL · 8ef93cf1
      由 Ingo Molnar 提交于 
      mark CONFIG_FAIR_GROUP_SCHED as !EXPERIMENTAL. All bugs have been
fixed and it's perfect ;-)
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      8ef93cf1
    • P
      sched: isolate SMP balancing code a bit more · 681f3e68
      由 Peter Williams 提交于 
      At the moment, a lot of load balancing code that is irrelevant to non
SMP systems gets included during non SMP builds.

This patch addresses this issue and reduces the binary size on non
SMP systems:

   text    data     bss     dec     hex filename
  10983      28    1192   12203    2fab sched.o.before
  10739      28    1192   11959    2eb7 sched.o.after
Signed-off-by: NPeter Williams <pwil3058@bigpond.net.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      681f3e68
    • P
      sched: reduce balance-tasks overhead · e1d1484f
      由 Peter Williams 提交于 
      At the moment, balance_tasks() provides low level functionality for both
  move_tasks() and move_one_task() (indirectly) via the load_balance()
function (in the sched_class interface) which also provides dual
functionality.  This dual functionality complicates the interfaces and
internal mechanisms and makes the run time overhead of operations that
are called with two run queue locks held.

This patch addresses this issue and reduces the overhead of these
operations.
Signed-off-by: NPeter Williams <pwil3058@bigpond.net.au>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e1d1484f
    • A
      sched: make cpu_shares_{show,store}() static · a0f846aa
      由 Adrian Bunk 提交于 
      cpu_shares_{show,store}() can become static.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a0f846aa
    • P
      sched: clean up some control group code · 2b01dfe3
      由 Paul Menage 提交于 
      - replace "cont" with "cgrp" in a few places in the CFS cgroup code, 
- use write_uint rather than write for cpu.shares write function
Signed-off-by: NPaul Menage <menage@google.com>
Acked-by : Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      2b01dfe3
    • J
      sched: constify sched.h · a8972ccf
      由 Joe Perches 提交于 
      Add const to some struct task_struct * uses
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a8972ccf
    • M
      sched: document profile=sleep requiring CONFIG_SCHEDSTATS · b3da2a73
      由 Mel Gorman 提交于 
      profile=sleep only works if CONFIG_SCHEDSTATS is set. This patch notes
the limitation in Documentation/kernel-parameters.txt and prints a
warning at boot-time if profile=sleep is used without CONFIG_SCHEDSTAT.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b3da2a73
    • S
      sched: use show_regs() to improve __schedule_bug() output · 838225b4
      由 Satyam Sharma 提交于 
      A full register dump along with stack backtrace would make the
"scheduling while atomic" message more helpful. Use show_regs() instead
of dump_stack() for this. We already know we're atomic in here (that is
why this function was called) so show_regs()'s atomicity expectations
are guaranteed.

Also, modify the output of the "BUG: scheduling while atomic:" header a
bit to keep task->comm and task->pid together and preempt_count() after
them.
Signed-off-by: NSatyam Sharma <satyam@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      838225b4
    • I
      sched: clean up sched_domain_debug() · 4dcf6aff
      由 Ingo Molnar 提交于 
      clean up sched_domain_debug().

this also shrinks the code a bit:

   text    data     bss     dec     hex filename
  50474    4306     480   55260    d7dc sched.o.before
  50404    4306     480   55190    d796 sched.o.after
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      4dcf6aff
    • I
      sched: fix fastcall mismatch in completion APIs · b15136e9
      由 Ingo Molnar 提交于 
      Jeff Dike noticed that wait_for_completion_interruptible()'s prototype
had a mismatched fastcall.

Fix this by removing the fastcall attributes from all the completion APIs.
Found-by: NJeff Dike <jdike@linux.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      b15136e9
    • M
      sched: fix sched_domain sysctl registration again · 7378547f
      由 Milton Miller 提交于 
      commit  029190c5 (cpuset
sched_load_balance flag) was not tested SCHED_DEBUG enabled as
committed as it dereferences NULL when used and it reordered
the sysctl registration to cause it to never show any domains
or their tunables.

Fixes:

1) restore arch_init_sched_domains ordering
	we can't walk the domains before we build them

	presently we register cpus with empty directories (no domain
	directories or files).

2) make unregister_sched_domain_sysctl do nothing when already unregistered
	detach_destroy_domains is now called one set of cpus at a time
	unregister_syctl dereferences NULL if called with a null.

	While the the function would always dereference null if called
	twice, in the previous code it was always called once and then
	was followed a register.  So only the hidden bug of the
	sysctl_root_table not being allocated followed by an attempt to
	free it would have shown the error.

3) always call unregister and register in partition_sched_domains
	The code is "smart" about unregistering only needed domains.
	Since we aren't guaranteed any calls to unregister, always 
	unregister.   Without calling register on the way out we
	will not have a table or any sysctl tree.

4) warn if register is called without unregistering
	The previous table memory is lost, leaving pointers to the
	later freed memory in sysctl and leaking the memory of the
	tables.

Before this patch on a 2-core 4-thread box compiled for SMT and NUMA,
the domains appear empty (there are actually 3 levels per cpu).  And as
soon as two domains a null pointer is dereferenced (unreliable in this
case is stack garbage):

bu19a:~# ls -R /proc/sys/kernel/sched_domain/
/proc/sys/kernel/sched_domain/:
cpu0  cpu1  cpu2  cpu3

/proc/sys/kernel/sched_domain/cpu0:

/proc/sys/kernel/sched_domain/cpu1:

/proc/sys/kernel/sched_domain/cpu2:

/proc/sys/kernel/sched_domain/cpu3:

bu19a:~# mkdir /dev/cpuset
bu19a:~# mount -tcpuset cpuset /dev/cpuset/
bu19a:~# cd /dev/cpuset/
bu19a:/dev/cpuset# echo 0 > sched_load_balance 
bu19a:/dev/cpuset# mkdir one
bu19a:/dev/cpuset# echo 1 > one/cpus               
bu19a:/dev/cpuset# echo 0 > one/sched_load_balance 
Unable to handle kernel paging request for data at address 0x00000018
Faulting instruction address: 0xc00000000006b608
NIP: c00000000006b608 LR: c00000000006b604 CTR: 0000000000000000
REGS: c000000018d973f0 TRAP: 0300   Not tainted  (2.6.23-bml)
MSR: 9000000000009032 <EE,ME,IR,DR>  CR: 28242442  XER: 00000000
DAR: 0000000000000018, DSISR: 0000000040000000
TASK = c00000001912e340[1987] 'bash' THREAD: c000000018d94000 CPU: 2
..
NIP [c00000000006b608] .unregister_sysctl_table+0x38/0x110
LR [c00000000006b604] .unregister_sysctl_table+0x34/0x110
Call Trace:
[c000000018d97670] [c000000007017270] 0xc000000007017270 (unreliable)
[c000000018d97720] [c000000000058710] .detach_destroy_domains+0x30/0xb0
[c000000018d977b0] [c00000000005cf1c] .partition_sched_domains+0x1bc/0x230
[c000000018d97870] [c00000000009fdc4] .rebuild_sched_domains+0xb4/0x4c0
[c000000018d97970] [c0000000000a02e8] .update_flag+0x118/0x170
[c000000018d97a80] [c0000000000a1768] .cpuset_common_file_write+0x568/0x820
[c000000018d97c00] [c00000000009d95c] .cgroup_file_write+0x7c/0x180
[c000000018d97cf0] [c0000000000e76b8] .vfs_write+0xe8/0x1b0
[c000000018d97d90] [c0000000000e810c] .sys_write+0x4c/0x90
[c000000018d97e30] [c00000000000852c] syscall_exit+0x0/0x40
Signed-off-by: NMilton Miller <miltonm@bga.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      7378547f
  3. 24 10月, 2007 29 次提交