- 20 4月, 2021 2 次提交
-
-
由 Huazhong Tan 提交于
Modify some inappropriate spaces in comments of struct hlcgevf_tqp_stats. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
When enter suspend mode the counter of pf reset will be increased twice, since both hclge_prepare_general() and hclge_prepare_wait() increase this counter. So remove the duplicate counting in hclge_prepare_general(). Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 4月, 2021 2 次提交
-
-
由 Guangbin Huang 提交于
To reduce the processing of unnecessary mailbox command when PF supports actively push its link status to VFs, VFs stop sending request link status command in periodic service task in this case. Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guangbin Huang 提交于
Previously, VF updates its link status every second by send query command to PF in periodic service task. If link stats of PF is changed, VF may need at most one second to update its link status. To reduce delay of link status between PF and VFs, PF actively push its link status to VFs when its link status is updated. And to let VF know PF supports this new feature, the link status changed mailbox command adds one bit to indicate it. Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 4月, 2021 1 次提交
-
-
由 Michael Walle 提交于
of_get_mac_address() returns a "const void*" pointer to a MAC address. Lately, support to fetch the MAC address by an NVMEM provider was added. But this will only work with platform devices. It will not work with PCI devices (e.g. of an integrated root complex) and esp. not with DSA ports. There is an of_* variant of the nvmem binding which works without devices. The returned data of a nvmem_cell_read() has to be freed after use. On the other hand the return of_get_mac_address() points to some static data without a lifetime. The trick for now, was to allocate a device resource managed buffer which is then returned. This will only work if we have an actual device. Change it, so that the caller of of_get_mac_address() has to supply a buffer where the MAC address is written to. Unfortunately, this will touch all drivers which use the of_get_mac_address(). Usually the code looks like: const char *addr; addr = of_get_mac_address(np); if (!IS_ERR(addr)) ether_addr_copy(ndev->dev_addr, addr); This can then be simply rewritten as: of_get_mac_address(np, ndev->dev_addr); Sometimes is_valid_ether_addr() is used to test the MAC address. of_get_mac_address() already makes sure, it just returns a valid MAC address. Thus we can just test its return code. But we have to be careful if there are still other sources for the MAC address before the of_get_mac_address(). In this case we have to keep the is_valid_ether_addr() call. The following coccinelle patch was used to convert common cases to the new style. Afterwards, I've manually gone over the drivers and fixed the return code variable: either used a new one or if one was already available use that. Mansour Moufid, thanks for that coccinelle patch! <spml> @a@ identifier x; expression y, z; @@ - x = of_get_mac_address(y); + x = of_get_mac_address(y, z); <... - ether_addr_copy(z, x); ...> @@ identifier a.x; @@ - if (<+... x ...+>) {} @@ identifier a.x; @@ if (<+... x ...+>) { ... } - else {} @@ identifier a.x; expression e; @@ - if (<+... x ...+>@e) - {} - else + if (!(e)) {...} @@ expression x, y, z; @@ - x = of_get_mac_address(y, z); + of_get_mac_address(y, z); ... when != x </spml> All drivers, except drivers/net/ethernet/aeroflex/greth.c, were compile-time tested. Suggested-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NMichael Walle <michael@walle.cc> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 4月, 2021 1 次提交
-
-
由 Colin Ian King 提交于
The reset_prepare and reset_done calls have a null pointer check on ae_dev however ae_dev is being dereferenced via the call to ns3_is_phys_func with the ae->pdev argument. Fix this by performing a null pointer check on ae_dev and hence short-circuiting the dereference to ae_dev on the call to ns3_is_phys_func. Addresses-Coverity: ("Dereference before null check") Fixes: 715c58e9 ("net: hns3: add suspend and resume pm_ops") Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 4月, 2021 1 次提交
-
-
由 Salil Mehta 提交于
Some trivial spelling mistakes which caught my eye during the review of the code. Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Link: https://lore.kernel.org/r/20210409074223.32480-1-salil.mehta@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>
-
- 09 4月, 2021 2 次提交
-
-
由 Jiaran Zhang 提交于
To implement the system suspend/resume functions, the NIC driver needs to support: 1. When the system enters the suspend mode, the driver needs to implement the suspend callback function of the NIC device. The driver needs to mute the device, stop all RX/TX activities of the device, and unmap the interrupt. 2. When the system enters the resume mode, the driver needs to implement the resume callback function of the NIC device and restore the device to the state before suspension. When the system enters the suspend and resume mode, the NIC driver actually executes the PF function reset process. When the PFs are suspending/resuming, VFs also enter the suspend/resume state because the PFs trigger the VFs to reset, therefore no operation is required when the VF pci_driver is suspending or resuming. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiaran Zhang 提交于
The flr_prepare/flr_done functions are not only used in the FLR scenario, but also used in the suspend/resume. Change the function names to prepare_for_reset/rebuild_for_reset, change the flr_prepare/flr_done to reset_prepare/reset_done in hnae3_ae_ops. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 4月, 2021 1 次提交
-
-
由 Guangbin Huang 提交于
Currently, the VF down state bit is cleared after VF sending link status request command. There is problem that when VF gets link status replied from PF, the down state bit may still set as 1. In this case, the link status replied from PF will be ignored and always set VF link status to down. To fix this problem, clear VF down state bit before VF requests link status. Fixes: e2cb1dec ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 4月, 2021 3 次提交
-
-
由 Salil Mehta 提交于
Limiting the scope of the variable vector_ring_chain to the block where it is used. Fixes: 424eb834 ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Salil Mehta 提交于
Code to defer the reset(which caps the frequency of the reset) schedules the timer and returns. Hence, following 'else-if' looks un-necessary. Fixes: 9de0b86f ("net: hns3: Prevent to request reset frequently") Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Salil Mehta 提交于
This removes the left over check and assignment which is no longer used anywhere in the function and should have been removed as part of the below mentioned patch. Fixes: 012fcb52 ("net: hns3: activate reset timer when calling reset_event") Signed-off-by: NSalil Mehta <salil.mehta@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 4月, 2021 1 次提交
-
-
由 Lu Wei 提交于
Fix some typos. Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NLu Wei <luwei32@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 3月, 2021 9 次提交
-
-
由 Yunsheng Lin 提交于
skb_put_padto() may fails because of memory failure, sw_err_cnt is already used to log memory failure in hns3_skb_linearize(), so use it to log the memory failure for skb_put_padto() too. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guojia Liao 提交于
The device HNAE3_DEVICE_VERSION_V3 supports up to 1280 queues and qsets for one function, so the bitwidth of tc_offset, meaning the tqps index, needs to expand from 10 bits to 11 bits. The device HNAE3_DEVICE_VERSION_V3 supports up to 512 queues on one TC. The tc_size, meaning the exponent with base 2 of queues supported on TC, which needs to expand from 3 bits to 4 bits. Signed-off-by: NGuojia Liao <liaoguojia@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
The actual size on wire for tso skb should be (gso_segs - 1) * hdr + skb->len instead of skb->len, which can be seen by user using 'ethtool -S ethX' cmd, and 'Byte Queue Limit' also use the send size stat to do the queue limiting, so add send_bytes in the desc_cb to record the actual send size for a skb. And send_bytes is only for tx desc_cb and page_offset is only for rx desc, so reuse the same space for both of them. Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yunsheng Lin 提交于
Currently hns3 driver only handle the xmit skb with one level of fraglist skb, add handling for multi level by calling hns3_tx_bd_num() recursively when calculating bd num and calling hns3_fill_skb_to_desc() recursively when filling tx desc. When the skb has a fraglist level of 24, the skb is simply dropped and stats.max_recursion_level is added to record the error. Move the stat handling from hns3_nic_net_xmit() to hns3_nic_maybe_stop_tx() in order to handle different error stat and add the 'max_recursion_level' and 'hw_limitation' stat. Note that the max recursive level as 24 is chose according to below: commit 48a1df65 ("skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow"). And that we are not able to find a testcase to verify the recursive fraglist case, so Fixes tag is not provided. Reported-by: NBarry Song <song.bao.hua@hisilicon.com> Signed-off-by: NYunsheng Lin <linyunsheng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yufeng Mo 提交于
Currently, the queue reset process needs to be performed one by one, which is inefficient. However, the queue reset of the same function is always performed at the same time. Therefore, according to the UM, command HCLGE_OPC_CFG_RST_TRIGGER can be used to reset all queues of the same function at a time, in order to optimize the queue reset process. Signed-off-by: NYufeng Mo <moyufeng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
Currently, if user hasn't change channel number, the rss_size is limited to be no more than the vector number, in order to keep one vector only being mapped to one queue. But the queue number of each tc can be different, and one vector also can be mapped by multiple queues. So remove this limitation. Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Guangbin Huang 提交于
The array size of bd_num_list is a fixed value, it may have potential overflow risk when array size of hclge_dfx_bd_offset_list is greater than that fixed value. So modify bd_num_list as a pointer and allocate memory for it according to array size of hclge_dfx_bd_offset_list. Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
When new rule state is TO_ADD or ACTIVE, and there is already a rule with same location in the fd_rule_list, the new rule will be freed after modifying the old rule. It may cause user-after-free issue when access rule again in hclge_add_fd_entry_common(). Fixes: fc4243b8 ("net: hns3: refactor flow director configuration") Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
Currently, when adding flow director rule, it missed to set rule state. Which may cause the rule state in software is unconsistent with hardware. Fixes: fc4243b8 ("net: hns3: refactor flow director configuration") Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2021 1 次提交
-
-
由 Liu Jian 提交于
drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c: In function 'hclge_clear_arfs_rules': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:7173:1: error: no return statement in function returning non-void [-Werror=return-type] 7173 | } | ^ cc1: some warnings being treated as errors make[6]: *** [scripts/Makefile.build:273: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.o] Error 1 make[5]: *** [scripts/Makefile.build:534: drivers/net/ethernet/hisilicon/hns3/hns3pf] Error 2 make[4]: *** [scripts/Makefile.build:534: drivers/net/ethernet/hisilicon/hns3] Error 2 make[4]: *** Waiting for unfinished jobs.... make[3]: *** [scripts/Makefile.build:534: drivers/net/ethernet/hisilicon] Error 2 make[2]: *** [scripts/Makefile.build:534: drivers/net/ethernet] Error 2 make[1]: *** [scripts/Makefile.build:534: drivers/net] Error 2 make[1]: *** Waiting for unfinished jobs.... make: *** [Makefile:1980: drivers] Error 2 Reported-by: NHulk Robot <hulkci@huawei.com> Signed-off-by: NLiu Jian <liujian56@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 3月, 2021 9 次提交
-
-
由 Guojia Liao 提交于
hclge_tm_vport_tc_info_update() is bloated, so split it into separate functions for readability and maintainability. Signed-off-by: NGuojia Liao <liaoguojia@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yufeng Mo 提交于
hclge_reset_rebuild() is a bit too long. So add a new function hclge_update_reset_level() to improve readability. Signed-off-by: NYufeng Mo <moyufeng@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
s/sucessful/successful/ s/serivce/service/ and remove a redundant new. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Correct a report warning in hns3_ethtool.c Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Parameter cm_buf is never used, so remove it. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
Parameter vf in hclge_set_vf_vlan_common() is unused now, so remove it. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiaran Zhang 提交于
According to the HW manual, the query operation is unnecessary when the TM QCN error event is enabled, so remove it. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peng Li 提交于
Remove some redundant blank lines. Signed-off-by: NPeng Li <lipeng321@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jian Shen 提交于
Vmdq is not supported yet, the num_vmdq_vport is always 0, it's a bit confusing when using the num_vport, so remove these unused codes of vmdq. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NJian Shen <shenjian15@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 25 3月, 2021 7 次提交
-
-
由 Yonglong Liu 提交于
There are some variables in HNS driver will not being referenced before assigned, so there is no need to init them. Signed-off-by: NYonglong Liu <liuyonglong@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yonglong Liu 提交于
The !! operation of variable en in hns_mac_config_sds_loopback_acpi() is redundant, so remove it. Signed-off-by: NYonglong Liu <liuyonglong@huawei.com> Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
HNS_LED_PC_REG is not used and can be removed. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
NIC_LB_TEST_RX_PKG_ERR is not used and can be removed. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Since config_half_duplex() in struct mac_driver is unused, so remove it. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Since set_rx_ignore_pause_frames() in struct mac_driver is unused, so remove it. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Huazhong Tan 提交于
Since set_autoneg() in struct hnae_ae_ops is unused, so remove it. Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-