- 27 4月, 2013 36 次提交
-
-
由 Michael Ellerman 提交于
For pseries machine emulation, in order to move the interrupt controller code to the kernel, we need to intercept some RTAS calls in the kernel itself. This adds an infrastructure to allow in-kernel handlers to be registered for RTAS services by name. A new ioctl, KVM_PPC_RTAS_DEFINE_TOKEN, then allows userspace to associate token values with those service names. Then, when the guest requests an RTAS service with one of those token values, it will be handled by the relevant in-kernel handler rather than being passed up to userspace as at present. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org> [agraf: fix warning] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
We no longer need to keep track of this now that MPIC destruction always happens either during VM destruction (after MMIO has been destroyed) or during a failed creation (before the fd has been exposed to userspace, and thus before the MMIO region could have been registered). Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
The hassle of getting refcounting right was greater than the hassle of keeping a list of devices to destroy on VM exit. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
We changed a few things in non-ia64 code paths. This patch blindly applies the changes to the ia64 code as well, hoping it proves useful in case anyone revives the ia64 kvm code. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
The code as is doesn't make any sense on non-e500 platforms. Restrict it there, so that people don't get wrong ideas on what would actually work. This patch should get reverted as soon as it's possible to either run e500 guests on non-e500 hosts or the MPIC emulation gains support for non-e500 modes. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Now that all pieces are in place for reusing generic irq infrastructure, we can copy x86's implementation of KVM_IRQ_LINE irq injection and simply reuse it for PPC, as it will work there just as well. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Now that all the irq routing and irqfd pieces are generic, we can expose real irqchip support to all of KVM's internal helpers. This allows us to use irqfd with the in-kernel MPIC. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
Enabling this capability connects the vcpu to the designated in-kernel MPIC. Using explicit connections between vcpus and irqchips allows for flexibility, but the main benefit at the moment is that it simplifies the code -- KVM doesn't need vm-global state to remember which MPIC object is associated with this vm, and it doesn't need to care about ordering between irqchip creation and vcpu creation. Signed-off-by: NScott Wood <scottwood@freescale.com> [agraf: add stub functions for kvmppc_mpic_{dis,}connect_vcpu] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
Hook the MPIC code up to the KVM interfaces, add locking, etc. Signed-off-by: NScott Wood <scottwood@freescale.com> [agraf: add stub function for kvmppc_mpic_set_epr, non-booke, 64bit] Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
Remove braces that Linux style doesn't permit, remove space after '*' that Lindent added, keep error/debug strings contiguous, etc. Substitute type names, debug prints, etc. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
Remove some parts of the code that are obviously QEMU or Raven specific before fixing style issues, to reduce the style issues that need to be fixed. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
This is QEMU's hw/openpic.c from commit abd8d4a4d6dfea7ddea72f095f993e1de941614e ("Update version for 1.4.0-rc0"), run through Lindent with no other changes to ease merging future changes between Linux and QEMU. Remaining style issues (including those introduced by Lindent) will be fixed in a later patch. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
Currently, devices that are emulated inside KVM are configured in a hardcoded manner based on an assumption that any given architecture only has one way to do it. If there's any need to access device state, it is done through inflexible one-purpose-only IOCTLs (e.g. KVM_GET/SET_LAPIC). Defining new IOCTLs for every little thing is cumbersome and depletes a limited numberspace. This API provides a mechanism to instantiate a device of a certain type, returning an ID that can be used to set/get attributes of the device. Attributes may include configuration parameters (e.g. register base address), device state, operational commands, etc. It is similar to the ONE_REG API, except that it acts on devices rather than vcpus. Both device types and individual attributes can be tested without having to create the device or get/set the attribute, without the need for separately managing enumerated capabilities. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
Now that we have most irqfd code completely platform agnostic, let's move irqfd's resample capability return to generic code as well. Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alexander Graf 提交于
Setting up IRQ routes is nothing IOAPIC specific. Extract everything that really is generic code into irqchip.c and only leave the ioapic specific bits to irq_comm.c. Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alexander Graf 提交于
The current irq_comm.c file contains pieces of code that are generic across different irqchip implementations, as well as code that is fully IOAPIC specific. Split the generic bits out into irqchip.c. Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alexander Graf 提交于
The IRQ routing set ioctl lives in the hacky device assignment code inside of KVM today. This is definitely the wrong place for it. Move it to the much more natural kvm_main.c. Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alexander Graf 提交于
The prototype has been stale for a while, I can't spot any real function define behind it. Let's just remove it. Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alexander Graf 提交于
We have a capability enquire system that allows user space to ask kvm whether a feature is available. The point behind this system is that we can have different kernel configurations with different capabilities and user space can adjust accordingly. Because features can always be non existent, we can drop any #ifdefs on CAP defines that could be used generically, like the irq routing bits. These can be easily reused for non-IOAPIC systems as well. Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alexander Graf 提交于
Quite a bit of code in KVM has been conditionalized on availability of IOAPIC emulation. However, most of it is generically applicable to platforms that don't have an IOPIC, but a different type of irq chip. Make code that only relies on IRQ routing, not an APIC itself, on CONFIG_HAVE_KVM_IRQ_ROUTING, so that we can reuse it later. Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Alexander Graf 提交于
The concept of routing interrupt lines to an irqchip is nothing that is IOAPIC specific. Every irqchip has a maximum number of pins that can be linked to irq lines. So let's add a new define that allows us to reuse generic code for non-IOAPIC platforms. Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NMichael S. Tsirkin <mst@redhat.com>
-
由 Paul Mackerras 提交于
At present, the KVM_GET_DIRTY_LOG ioctl doesn't report modifications done by the host to the virtual processor areas (VPAs) and dispatch trace logs (DTLs) registered by the guest. This is because those modifications are done either in real mode or in the host kernel context, and in neither case does the access go through the guest's HPT, and thus no change (C) bit gets set in the guest's HPT. However, the changes done by the host do need to be tracked so that the modified pages get transferred when doing live migration. In order to track these modifications, this adds a dirty flag to the struct representing the VPA/DTL areas, and arranges to set the flag when the VPA/DTL gets modified by the host. Then, when we are collecting the dirty log, we also check the dirty flags for the VPA and DTL for each vcpu and set the relevant bit in the dirty log if necessary. Doing this also means we now need to keep track of the guest physical address of the VPA/DTL areas. So as not to lose track of modifications to a VPA/DTL area when it gets unregistered, or when a new area gets registered in its place, we need to transfer the dirty state to the rmap chain. This adds code to kvmppc_unpin_guest_page() to do that if the area was dirty. To simplify that code, we now require that all VPA, DTL and SLB shadow buffer areas fit within a single host page. Guests already comply with this requirement because pHyp requires that these areas not cross a 4k boundary. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Paul Mackerras 提交于
At present, the code that determines whether a HPT entry has changed, and thus needs to be sent to userspace when it is copying the HPT, doesn't consider a hardware update to the reference and change bits (R and C) in the HPT entries to constitute a change that needs to be sent to userspace. This adds code to check for changes in R and C when we are scanning the HPT to find changed entries, and adds code to set the changed flag for the HPTE when we update the R and C bits in the guest view of the HPTE. Since we now need to set the HPTE changed flag in book3s_64_mmu_hv.c as well as book3s_hv_rm_mmu.c, we move the note_hpte_modification() function into kvm_book3s_64.h. Current Linux guest kernels don't use the hardware updates of R and C in the HPT, so this change won't affect them. Linux (or other) kernels might in future want to use the R and C bits and have them correctly transferred across when a guest is migrated, so it is better to correct this deficiency. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mihai Caraman 提交于
Add e6500 core to Kconfig description. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mihai Caraman 提交于
Extend processor compatibility names to e6500 cores. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Reviewed-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mihai Caraman 提交于
Embedded.Page Table (E.PT) category is not supported yet in e6500 kernel. Configure TLBnCFG to remove E.PT and E.HV.LRAT categories from VCPUs. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mihai Caraman 提交于
EPTCFG register defined by E.PT is accessed unconditionally by Linux guests in the presence of MAV 2.0. Emulate it now. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mihai Caraman 提交于
Add support for TLBnPS registers available in MMU Architecture Version (MAV) 2.0. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mihai Caraman 提交于
Vcpu's MMU default configuration and geometry update logic was buried in a chunk of code. Move them to dedicated functions to add more clarity. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mihai Caraman 提交于
MMU registers were exposed to user-space using sregs interface. Add them to ONE_REG interface using kvmppc_get_one_reg/kvmppc_set_one_reg delegation mechanism. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Mihai Caraman 提交于
Refactor Book3E ONE_REG ioctl implementation to use kvmppc_get_one_reg/ kvmppc_set_one_reg delegation interface introduced by Book3S. This is necessary for MMU SPRs which are platform specifics. Get rid of useless case braces in the process. Signed-off-by: NMihai Caraman <mihai.caraman@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
This allows the exit to user space if emulator request by returning EMULATE_EXIT_USER. This will be used in subsequent patches in list Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
Currently the instruction emulator code returns EMULATE_EXIT_USER and common code initializes the "run->exit_reason = .." and "vcpu->arch.hcall_needed = .." with one fixed reason. But there can be different reasons when emulator need to exit to user space. To support that the "run->exit_reason = .." and "vcpu->arch.hcall_needed = .." initialization is moved a level up to emulator. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
Instruction emulation return EMULATE_DO_PAPR when it requires exit to userspace on book3s. Similar return is required for booke. EMULATE_DO_PAPR reads out to be confusing so it is renamed to EMULATE_EXIT_USER. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
This patch defines the interface parameter for KVM_SET_GUEST_DEBUG ioctl support. Follow up patches will use this for setting up hardware breakpoints, watchpoints and software breakpoints. Also kvm_arch_vcpu_ioctl_set_guest_debug() is brought one level below. This is because I am not sure what is required for book3s. So this ioctl behaviour will not change for book3s. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Bharat Bhushan 提交于
Kernel can only access pages which maps as memory. So flush only the valid kernel pages. Signed-off-by: NBharat Bhushan <bharat.bhushan@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 25 4月, 2013 1 次提交
-
-
由 Gleb Natapov 提交于
Source operand for one byte mov[zs]x is decoded incorrectly if it is in high byte register. Fix that. Cc: stable@vger.kernel.org Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
- 22 4月, 2013 3 次提交
-
-
由 Jan Kiszka 提交于
If we load the complete EFER MSR on entry or exit, EFER.LMA (and LME) loading is skipped. Their consistency is already checked now before starting the transition. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Jan Kiszka 提交于
As we may emulate the loading of EFER on VM-entry and VM-exit, implement the checks that VMX performs on the guest and host values on vmlaunch/ vmresume. Factor out kvm_valid_efer for this purpose which checks for set reserved bits. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-
由 Jan Kiszka 提交于
The logic for checking if interrupts can be injected has to be applied also on NMIs. The difference is that if NMI interception is on these events are consumed and blocked by the VM exit. Signed-off-by: NJan Kiszka <jan.kiszka@siemens.com> Signed-off-by: NGleb Natapov <gleb@redhat.com>
-