"ci13xxx" is bad for at least the following reasons:
  * people often mistype it
  * it doesn't add any informational value to the names it's used in
  * it needlessly attracts mail filters

This patch replaces it with "ci_hdrc", "ci_udc" or "ci_hw", depending
on the situation. Modules with ci13xxx prefix are also renamed accordingly
and aliases are added for compatibility. Otherwise, no functional changes.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

When running a scp transfer using a USB/Ethernet adapter the following crash
happens:

$ scp test.tar.gz fabio@192.168.1.100:/home/fabio
fabio@192.168.1.100's password:
test.tar.gz                                      0%    0     0.0KB/s   --:-- ETA
------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:255 dev_watchdog+0x2cc/0x2f0()
NETDEV WATCHDOG: eth0 (asix): transmit queue 0 timed out
Modules linked in:
Backtrace:
[<80011c94>] (dump_backtrace+0x0/0x10c) from [<804d3a5c>] (dump_stack+0x18/0x1c)
 r6:000000ff r5:80412388 r4:80685dc0 r3:80696cc0
[<804d3a44>] (dump_stack+0x0/0x1c) from [<80021868>]
(warn_slowpath_common+0x54/0x6c)
[<80021814>] (warn_slowpath_common+0x0/0x6c) from [<80021924>]
(warn_slowpath_fmt+0x38/0x40)
...

Setting SDIS (Stream Disable Mode- bit 4 of USBMODE register) fixes the problem.

However, in current code CI13XXX_DISABLE_STREAMING flag is only set in udc mode,
so allow disabling streaming also in host mode.

Tested on a mx6qsabrelite board.
Suggested-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1630) cleans up a few minor items resulting from the
split-up of the ehci-hcd driver:

	Remove the product_desc string from the ehci_driver_overrides
	structure.  All drivers will use the generic "EHCI Host
	Controller" string.  (This was requested by Felipe Balbi.)

	Allow drivers to pass a NULL pointer to ehci_init_driver()
	if they don't have to override any settings.

	Remove a #define symbol that is no longer used from the
	ChipIdea host driver.

	Rename overrides to pci_overrides in ehci-pci.c, for
	consistency with ehci-platform.c.

	Mark the *_overrides structures as __initdata.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1629) fixes a build error in the ChipIdea host driver
when compiled for the ARM architecture.  The error was introduced
by commit 99f91934 (USB: EHCI: make
ehci-platform a separate driver).

The fix is simple; an additional header-file #include is needed.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Tested-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1627) splits the ehci-hcd core code, which has become a
separate library module, out from the ChipIdea host driver.  Instead
of #include-ing ehci-hcd.c directly, the ChipIdea module will now use
the ehci-hcd library in a normal fashion.

This fixes a build error caused by commit
3e023203 (USB: EHCI: prepare to make
ehci-hcd a library module); I had forgotten about the unorthodox way
the ChipIdea driver uses the ehci-hcd code.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch (as1623) removes the ehci_port_power() routine and all the
places that call it.  There's no reason for ehci-hcd to change the
port power settings; the hub driver takes care of all that stuff.

There is one exception: When the controller is resumed from
hibernation or following a loss of power, the ports that are supposed
to be handed over to a companion controller must be powered on first.
Otherwise the handover won't work.  This process is not visible to the
hub driver, so it has to be handled in ehci-hcd.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Sometimes, the driver bindings may know what phy they use.
For example, when using device tree, the usb controller may have a
phandler pointing to usb phy.
Signed-off-by: NRichard Zhao <richard.zhao@freescale.com>
Reviewed-by: NMarek Vasut <marex@denx.de>
Acked-by: NFelipe Balbi <balbi@ti.com>
Tested-by: NSubodh Nijsure <snijsure@grid-net.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch rename struct ci13xxx_udc_driver and var with the type.

ci13xxx_platform_data reflect it's passed from platfrom driver.
Signed-off-by: NRichard Zhao <richard.zhao@freescale.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Use usb_put_hcd() call instead of usb_remove_hcd() as that's the appropriate
call to drop hcd which failed registration.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Felipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Some implementations need this limitation to work correctly.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds EHCI host support to the chipidea driver. We want it to be
part of the hdrc driver and not a standalone (sub-)driver module, as
the structure of ehci-hcd.c suggests, so for chipidea controller we
hack it to not provide platform-related code, but only the ehci hcd.

The ehci-platform driver won't work for us here too, because the
controller uses the same registers for both device and host mode and
also otg-related bits, so it's not really possible to put ehci registers
into a separate resource.

This is not a pretty solution, but the alternative is exporting symbols
from the chipidea driver to a ehci-chipidea driver and doing all the
module refcounting.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>