Call netdev notifiers before and after changing the device type.
Signed-off-by: NMartin Schiller <ms@dev.tdt.de>
Link: https://lore.kernel.org/r/20201118063919.29485-1-ms@dev.tdt.deSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Add support to choose RSS flow key algorithm with IPv4 transport protocol
field included in hashing input data. This will be enabled by default.
There-by enabling 3/5 tuple hash
Signed-off-by: NSunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: NGeorge Cherian <george.cherian@marvell.com>
Link: https://lore.kernel.org/r/20201120093906.2873616-1-george.cherian@marvell.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Merge tag 'linux-can-next-for-5.11-20201120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
pull-request: can-next 2020-11-20

The first patch is by Yegor Yefremov and he improves the j1939 documentaton by
adding tables for the CAN identifier and its fields.

Then there are 8 patches by Oliver Hartkopp targeting the CAN driver
infrastructure and drivers. These add support for optional DLC element to the
Classical CAN frame structure. See patch ea780056 ("can: add optional DLC
element to Classical CAN frame structure") for details. Oliver's last patch
adds len8_dlc support to several drivers. Stefan Mätje provides a patch to add
len8_dlc support to the esd_usb2 driver.

The next patch is by Oliver Hartkopp, too and adds support for modification of
Classical CAN DLCs to CAN GW sockets.

The next 3 patches target the nxp,flexcan DT bindings. One patch by my adds the
missing uint32 reference to the clock-frequency property. Joakim Zhang's
patches fix the fsl,clk-source property and add the IMX_SC_R_CAN() macro to the
imx firmware header file, which will be used in the flexcan driver later.

Another patch by Joakim Zhang prepares the flexcan driver for SCU based
stop-mode, by giving the existing, GPR based stop-mode, a _GPR postfix.

The next 5 patches are by me, target the flexcan driver, and clean up the
.ndo_open and .ndo_stop callbacks. These patches try to fix a sporadically
hanging flexcan_close() during simultanious ifdown, sending of CAN messages and
probably open CAN bus. I was never able to reproduce, but these seem to fix the
problem at the reporting user. As these changes are rather big, I'd like to
mainline them via net-next/master.

The next patches are by Jimmy Assarsson and Christer Beskow, they add support
for new USB devices to the existing kvaser_usb driver.

The last patch is by Kaixu Xia and simplifies the return in the
mcp251xfd_chip_softreset() function in the mcp251xfd driver.

* tag 'linux-can-next-for-5.11-20201120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (25 commits)
  can: mcp251xfd: remove useless code in mcp251xfd_chip_softreset
  can: kvaser_usb: Add new Kvaser hydra devices
  can: kvaser_usb: kvaser_usb_hydra: Add support for new device variant
  can: kvaser_usb: Add new Kvaser Leaf v2 devices
  can: kvaser_usb: Add USB_{LEAF,HYDRA}_PRODUCT_ID_END defines
  can: flexcan: flexcan_close(): change order if commands to properly shut down the controller
  can: flexcan: flexcan_open(): completely initialize controller before requesting IRQ
  can: flexcan: flexcan_rx_offload_setup(): factor out mailbox and rx-offload setup into separate function
  can: flexcan: move enabling/disabling of interrupts from flexcan_chip_{start,stop}() to callers
  can: flexcan: factor out enabling and disabling of interrupts into separate function
  can: flexcan: rename macro FLEXCAN_QUIRK_SETUP_STOP_MODE -> FLEXCAN_QUIRK_SETUP_STOP_MODE_GPR
  dt-bindings: firmware: add IMX_SC_R_CAN(x) macro for CAN
  dt-bindings: can: fsl,flexcan: fix fsl,clk-source property
  dt-bindings: can: fsl,flexcan: add uint32 reference to clock-frequency property
  can: gw: support modification of Classical CAN DLCs
  can: drivers: add len8_dlc support for esd_usb2 CAN adapter
  can: drivers: add len8_dlc support for various CAN adapters
  can: drivers: introduce helpers to access Classical CAN DLC values
  can: update documentation for DLC usage in Classical CAN
  can: rename CAN FD related can_len2dlc and can_dlc2len helpers
  ...
====================

Link: https://lore.kernel.org/r/20201120133318.3428231-1-mkl@pengutronix.deSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Use netdev->tstats instead of a member of net_bridge for storing
a pointer to the per-cpu counters. This allows us to use core
functionality for statistics handling.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/9bad2be2-fd84-7c6e-912f-cee433787018@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Huazhong Tan says:

====================
net: hns3: misc updates for -next

This series includes some misc updates for the HNS3 ethernet driver.

 #1 adds support for 1280 queues
 #2 adds mapping for BAR45 which is needed by RoCE client.
 #3 extend the interrupt resources.
 #4&#5 add support to query firmware's calculated shaping parameters.
====================

Link: https://lore.kernel.org/r/1605863783-36995-1-git-send-email-tanhuazhong@huawei.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Adds debugfs to dump new shaping parameters: rate and flag.
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Since the calculation of the driver is fixed, if the number of
queue or clock changed, the calculated result may be inaccurate.

So for compatible and maintainable, add a new flag to tell the
firmware to calculate the shaping parameters with the specified
rate.
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

For HNAE3_DEVICE_VERSION_V3, a maximum of 1281 interrupt
resources are supported. To utilize these new resources,
extend the corresponding field or variable to 16bit type,
and remove the restriction of NIC client that only use a
maximum of 65 interrupt vectors. In addition, the I/O address
of the extended interrupt resources are different, so an extra
handler is needed.

Currently, the total number of interrupts is the sum of RoCE's
number and RoCE's offset (RoCE is in front of NIC), since
the number of both NIC and RoCE are same. For readability,
rewrite the corresponding field of the command, rename the
RoCE's offset field as the number of NIC interrupts, then
the total number of interrupts is sum of the number of RoCE
and NIC, and replace vport->back with hdev in
hclge_init_roce_base_info() for simplifying the code.
Signed-off-by: NYufeng Mo <moyufeng@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

For device who has device memory accessed through the PCI BAR4,
IO descriptor push of NIC and direct WQE(Work Queue Element) of
RoCE will use this device memory, so add support for mapping
this device memory, and add this info to the RoCE client whose
new feature needs.
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

For DEVICE_VERSION_V1/2, there are total 1024 queues and
queue sets. For DEVICE_VERSION_V3, it increases to 1280,
and can be assigned to one pf， so remove the limitation
of 1024.

To keep compatible with DEVICE_VERSION_V1/2 and old driver
version, the queue number is split into two part:
tqp_num(range 0~1023) and ext_tqp_num(range 1024~1279).
Signed-off-by: NYonglong Liu <liuyonglong@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Thomas Falcon says:

====================
ibmvnic: Performance improvements and other updates

The first three patches utilize a hypervisor call allowing multiple
TX and RX buffer replenishment descriptors to be sent in one operation,
which significantly reduces hypervisor call overhead. The xmit_more
and Byte Queue Limit API's are leveraged to provide this support
for TX descriptors.

The subsequent two patches remove superfluous code and members in
TX completion handling function and TX buffer structure, respectively,
and remove unused routines.

Finally, four patches which ensure that device queue memory is
cache-line aligned, resolving slowdowns observed in PCI traces,
as well as optimize the driver's NAPI polling function and
to RX buffer replenishment are provided by Dwip Banerjee.

This series provides significant performance improvements, allowing
the driver to fully utilize 100Gb NIC's.
====================

Link: https://lore.kernel.org/r/1605748345-32062-1-git-send-email-tlfalcon@linux.ibm.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Reduce the amount of time spent replenishing RX buffers by only doing
so once available buffers has fallen under a certain threshold, in this
case half of the total number of buffers, or if the polling loop exits
before the packets processed is less than its budget. Non-exhaustion of
NAPI budget implies lower incoming packet pressure, allowing the leeway
to refill the buffers in preparation for any impending burst.
Signed-off-by: NDwip N. Banerjee <dnbanerg@us.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Take advantage of the additional optimizations in netdev_alloc_skb when
allocating socket buffers to be used for packet reception.
Signed-off-by: NDwip N. Banerjee <dnbanerg@us.ibm.com>
Acked-by: NLijun Pan <ljp@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

If the current NAPI polling loop exits without completing it's
budget, only re-enable interrupts if there are no entries remaining
in the queue and napi_complete_done is successful. If there are entries
remaining on the queue that were missed, restart the polling loop.
Signed-off-by: NDwip N. Banerjee <dnbanerg@us.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

PCI bus slowdowns were observed on IBM VNIC devices as a result
of partial cache line writes and non-cache aligned full cache line writes.
Ensure that packet data buffers are cache-line aligned to avoid these
slowdowns.
Signed-off-by: NDwip N. Banerjee <dnbanerg@us.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

It is not longer used, so remove it.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Acked-by: NLijun Pan <ljp@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Remove unused and superfluous code and members in
existing TX implementation and data structures.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Include support for the xmit_more feature utilizing the
H_SEND_SUB_CRQ_INDIRECT hypervisor call which allows the sending
of multiple subordinate Command Response Queue descriptors in one
hypervisor call via a DMA-mapped buffer. This update reduces hypervisor
calls and thus hypervisor call overhead per TX descriptor.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Utilize the H_SEND_SUB_CRQ_INDIRECT hypervisor call to send
multiple RX buffer descriptors to the device in one hypervisor
call operation. This change will reduce the number of hypervisor
calls and thus hypervisor call overhead needed to transmit
RX buffer descriptors to the device.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This patch introduces the infrastructure to send batched subordinate
Command Response Queue descriptors, which are used by the ibmvnic
driver to send TX frame and RX buffer descriptors.
Signed-off-by: NThomas Falcon <tlfalcon@linux.ibm.com>
Acked-by: NLijun Pan <ljp@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: add a driver shutdown callback

The final patch in this series adds a driver shutdown callback for
the IPA driver.  The patches leading up to that address some issues
encountered while ensuring that callback worked as expected:
  - The first just reports a little more information when channels
    or event rings are in unexpected states
  - The second patch recognizes a condition where an as-yet-unused
    channel does not require a reset during teardown
  - The third patch explicitly ignores a certain error condition,
    because it can't be avoided, and is harmless if it occurs
  - The fourth properly handles requests to retry a channel HALT
    request
  - The fifth makes a second attempt to stop modem activity during
    shutdown if it's busy

The shutdown callback is implemented by calling the existing remove
callback function (reporting if that returns an error).
====================

Link: https://lore.kernel.org/r/20201119224929.23819-1-elder@linaro.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

A system shutdown can happen at essentially any time, and it's
possible that the IPA driver is busy when a shutdown is underway.
IPA hardware accesses IMEM and SMEM memory regions using an IOMMU,
and at some point during shutdown, needed I/O mappings could become
invalid.  This could be disastrous for any "in flight" IPA activity.

Avoid this by defining a new driver shutdown callback that stops all
IPA activity and cleanly shuts down the driver.  It merely calls the
driver's existing remove callback, reporting the error if it returns
one.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The IPA driver remove callback, ipa_remove(), calls ipa_modem_stop()
if the setup stage of initialization is complete.  If a concurrent
call to ipa_modem_start() or ipa_modem_stop() has begin but not
completed, ipa_modem_stop() can return an error (-EBUSY).

The next patch adds a driver shutdown callback, which will simply
call ipa_remove().  We really want our shutdown callback to clean
things up.  So add a single retry to the ipa_modem_stop() call in
ipa_remove() after a short (millisecond) delay.  This offers no
guarantee the shutdown will complete successfully, but we'll at
least try a little harder before giving up.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When stopping an AP RX channel, there can be a transient period
while the channel enters STOP_IN_PROC state before reaching the
final STOPPED state.  In that case we make another attempt to stop
the channel.

Similarly, when stopping a modem channel (using a GSI generic
command issued from the AP), it's possible that multiple attempts
will be required before the channel reaches STOPPED state.

Add a field to the GSI structure to record an errno representing the
result code provided when a generic command completes.  If the
result learned in gsi_isr_gp_int1() is RETRY, record -EAGAIN in the
result code, otherwise record 0 for success, or -EIO for any other
result.

If we time out nf gsi_generic_command() waiting for the command to
complete, return -ETIMEDOUT (as before).  Otherwise return the
result stashed by gsi_isr_gp_int1().

Add a loop in gsi_modem_channel_halt() to reissue the HALT command
if the result code indicates -EAGAIN.  Limit this to 10 retries
(after the initial attempt).
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

IPA v4.2 has a hardware quirk that requires the AP to allocate GSI
channels for the modem to use.  It is recommended that these modem
channels get stopped (with a HALT generic command) by the AP when
its IPA driver gets removed.

The AP has no way of knowing the current state of a modem channel.
So when the IPA driver issues a HALT command it's possible the
channel is not running, and in that case we get an error indication.
This error simply means we didn't need to stop the channel, so we
can ignore it.

This patch adds an explanation for this situation, and arranges for
this condition to *not* report an error message.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

If the rmnet_ipa0 network device has not been opened at the time
we remove or shut down the IPA driver, its underlying TX and RX
GSI channels will not have been started, and they will still be
in ALLOCATED state.

The RESET command on a channel is meant to return a channel to
ALLOCATED state after it's been stopped.  But if it was never
started, its state will still be ALLOCATED, the RESET command
is not required.

Quietly skip doing the reset without printing an error message if a
channel is already in ALLOCATED state when we request it be reset.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When a GSI command is used to change the state of a channel or event
ring we check the state before and after the command to ensure it is
as expected.  If not, we print an error message, but it does not
include the channel or event ring id, and it easily can.  Add the
channel or event ring id to these error messages.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Alex Elder says:

====================
net: ipa: platform-specific clock and interconnect rates

This series changes the way the IPA core clock rate and the
bandwidth parameters for interconnects are specified.  Previously
these were specified with hard-wired constants, with the same values
used for the SDM845 and SC7180 platforms.  Now these parameters are
recorded in platform-specific configuration data.

For the SC7180 this means we use an all-new core clock rate and
interconnect parameters.

Additionally, while developing this I learned that the average
bandwidth setting for two of the interconnects is ignored (on both
platforms).  Zero is now used explicitly as that unused bandwidth
value.  This means the SDM845 bandwidth settings are also changed
by this series.
====================

Link: https://lore.kernel.org/r/20201119224041.16066-1-elder@linaro.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Stop assuming a fixed IPA core clock rate and interconnect
bandwidths.  Use the configuration data defined for these
things instead.  Get rid of the previously-used constants.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Populate the core clock rate and interconnect average and peak
bandwidth data for SDM845 and SC7180 in their configuration data
files.  At this point we still don't *use* this data.

Note that SC7180 actually defines a new core clock rate (100 MHz
instead of 75 MHz) and new interconnect bandwidth values.  They
will be activated in the next commit, which uses the configured
values rather than the fixed constants.
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Define a new type of configuration data, used to initialize the
IPA core clock and interconnects.  This is the first of three
patches, and defines the data types and interface but doesn't
yet use them.

Switch the return value if there is no matching configuration data
to ENODEV instead of ENOTSUPP (to avoid using the nonstandard errno).
Signed-off-by: NAlex Elder <elder@linaro.org>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The mdio_bus may have dependencies from GPIO controller and so got
deferred. Now it will print error message every time -EPROBE_DEFER is
returned which from:
__mdiobus_register()
 |-devm_gpiod_get_optional()
without actually identifying error code.

"mdio_bus 4a101000.mdio: mii_bus 4a101000.mdio couldn't get reset GPIO"

Hence, suppress error message for devm_gpiod_get_optional() returning
-EPROBE_DEFER case by using dev_err_probe().
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20201119203446.20857-1-grygorii.strashko@ti.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Tiny improvement, let dev_err_probe() deal with EPROBE_DEFER.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/b0c4ebcf-2047-e933-b890-8a20e4bdb19f@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Some chip versions have a hw bug resulting in lost door bell rings.
To work around this the doorbell is also rung whenever we still have
tx descriptors in flight after having cleaned up tx descriptors.
These PCI(e) writes come at a cost, therefore let's reduce the number
of extra doorbell rings.
If skb is NULL then this means:
- last cleaned-up descriptor belongs to a skb with at least one fragment
  and last fragment isn't marked as sent yet
- hw is in progress sending the skb, therefore no extra doorbell ring
  is needed for this skb
- once last fragment is marked as transmitted hw will trigger
  a tx done interrupt and we come here again (with skb != NULL)
  and ring the doorbell if needed
Therefore skip the workaround doorbell ring if skb is NULL.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/0a15a83c-aecf-ab51-8071-b29d9dcd529a@gmail.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Mat Martineau says:

====================
mptcp: More miscellaneous MPTCP fixes

Here's another batch of fixup and enhancement patches that we have
collected in the MPTCP tree.

Patch 1 removes an unnecessary flag and related code.

Patch 2 fixes a bug encountered when closing fallback sockets.

Patches 3 and 4 choose a better transmit subflow, with a self test.

Patch 5 adjusts tracking of unaccepted subflows

Patches 6-8 improve handling of long ADD_ADDR options, with a test.

Patch 9 more reliably tracks the MPTCP-level window shared with peers.

Patch 10 sends MPTCP-level acknowledgements more aggressively, so the
peer can send more data without extra delay.
====================

Link: https://lore.kernel.org/r/20201119194603.103158-1-mathew.j.martineau@linux.intel.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Send timely MPTCP-level ack is somewhat difficult when
the insertion into the msk receive level is performed
by the worker.

It needs TCP-level dup-ack to notify the MPTCP-level
ack_seq increase, as both the TCP-level ack seq and the
rcv window are unchanged.

We can actually avoid processing incoming data with the
worker, and let the subflow or recevmsg() send ack as needed.

When recvmsg() moves the skbs inside the msk receive queue,
the msk space is still unchanged, so tcp_cleanup_rbuf() could
end-up skipping TCP-level ack generation. Anyway, when
__mptcp_move_skbs() is invoked, a known amount of bytes is
going to be consumed soon: we update rcv wnd computation taking
them in account.

Additionally we need to explicitly trigger tcp_cleanup_rbuf()
when recvmsg() consumes a significant amount of the receive buffer.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

OoO handling attempts to detect when packet is out-of-window by testing
current ack sequence and remaining space vs. sequence number.

This doesn't work reliably. Store the highest allowed sequence number
that we've announced and use it to detect oow packets.

Do this when mptcp options get written to the packet (wire format).
For this to work we need to move the write_options call until after
stack selected a new tcp window.
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This patch added IPv6 support for do_transfer, and the test cases for
ADD_ADDR IPv6.
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

When ADD_ADDR suboption includes an IPv6 address, the size is 28 octets.
It will not fit when other MPTCP suboptions are included in this packet,
e.g. DSS. So here we send out an ADD_ADDR dedicated packet to carry only
ADD_ADDR suboption, no other MPTCP suboptions.

In mptcp_pm_announce_addr, we check whether this is an IPv6 ADD_ADDR.
If it is, we set the flag MPTCP_ADD_ADDR_IPV6 to true. Then we call
mptcp_pm_nl_add_addr_send_ack to sent out a new pure ACK packet.

In mptcp_established_options_add_addr, we check whether this is a pure
ACK packet for ADD_ADDR. If it is, we drop all other MPTCP suboptions
in this packet, only put ADD_ADDR suboption in it.
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This patch changed the 'add_addr_signal' type from bool to char, so that
we could encode the addr type there.
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>