[Why]
Currently, when full p-state changes are not supported, DLG parameters
are calculated for no p-state support at all. However, we are required
to always support dummy p-state changes, so we should instead calculate
DLG based on dummy p-state latency when full p-state is unsupported.
This behaviour already exists for DCN2.

[How]
 - move DLG calculation inside WM calculation
 - if p-state unsupported, do not recalculate for set A, instead copy from
set C, and perform DLG calculation with dummy p-state latency
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Vbios uses preferred timing to turn on edp but OS could use other
timing. If change pixel clock when link active, there is unexpected
garbage on monitor.

[How]
Once pixel clock changed, the driver needs to disable stream.
Signed-off-by: NChiawen Huang <chiawen.huang@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Some debug bits are not being copied from driver to fw.

[How]
Copy debug bits properly.
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
HW team measurement requires updating values

[How]
Update bounding box values
Signed-off-by: NAlvin Lee <alvin.lee2@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Revert the guilty change introduced by the commit below:
drm/amd/pm: postpone SOCCLK/UCLK enablement after DAL initialization(V2)
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c: In function ‘amdgpu_ras_fs_init’:
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1284:2: warning: ignoring return value of ‘sysfs_create_group’, declared with attribute warn_unused_result [-Wunused-result]
 1284 |  sysfs_create_group(&adev->dev->kobj, &group);
      |  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

v2: just print an error for sysfs group creation failure
Acked-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Merge ras sysfs creation together by calling sysfs_create_group
once, as sysfs_update_group may not work properly as expected.

v2: improve commit message
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDennis Li <Dennis.Li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In FLR routine, init_data_exchange is called at reset_sriov
while fini_data_exchange is not. This will duplicating work
thread.

So call fini_data_exchange before reset for SRIOV
Signed-off-by: NTiecheng Zhou <Tiecheng.Zhou@amd.com>
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Refactor the driver code to use amdgpu_virt_read_pf2vf_data
  and amdgpu_virt_write_vf2pf_data instead of writing all code in
  one function (which is the old amdgpu_virt_init_data_exchange)

- Adding a new transaction method for VF2PF message between host
  and guest driver. Guest side will periodically update VF2PF
  message in the framebuffer.

  In the new header, we include guest ucode information, guest
  framebuffer usage, and engine usage

- Clean up the old macros since they will cause compile error if
  the new transaction method is used

v2: squash in build fix
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

- Update guest side VF2PF interface header file
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Documents PP_FEATURE_MASK enum.
Provides instructions on how to use ppfeaturemasks.

v2: improve enum definitions and add kernel command line parameters to
    ppfeaturemask instructions
v3: fix alignment issues
Signed-off-by: NRyan Taylor <ryan.taylor@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

disable UMC RAS in lieu of stability issues on certain sku
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NJohn Clements <john.clements@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows us to set different defaults on a per asic basis.  This
way we can enable noretry on dGPUs where it can increase performance
in certain cases and disable it on chips where it can be problematic.

For now the default is 0 for all asics, but we may want to try and
enable it again for newer dGPUs.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will allow us to have different defaults per asic
in a future patch.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Properly handle clang and older versions of gcc.

Fixes: e77165bf ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: NNirmoy Das <nirmoy.das@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NEmily.Deng <Emily.Deng@amd.com>
Reviewed-by: NFrank Min <Frank.Min@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

smc, sdma, sos, ta and asd fw is not used in SRIOV. Skip them to
accelerate sw_init for navi12.

v2: skip above fw in SRIOV for vega10 and sienna_cichlid
v3: directly skip psp fw loading in SRIOV
Signed-off-by: NJingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: NEmily.Deng <Emily.Deng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

smc fw is not needed in SRIOV, thus driver should not try to get smc
fw data.
Signed-off-by: NJingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: NEmily.Deng <Emily.Deng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

max_caps might be 0, thus hdcp_work might be ZERO_SIZE_PTR
Signed-off-by: NFlora Cui <flora.cui@amd.com>
Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.
Signed-off-by: NJiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: NLikun Gao <Likun.Gao@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Modify the comment typo: "definately" -> "definitely".
Signed-off-by: NWang Qing <wangqing@vivo.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In the function dal_ddc_service_query_ddc_data,
get rid of dal_ddc_i2c_payloads_destroy, call
dal_vector_destruct() directly.
This change is to make the code run a bit fast.
Signed-off-by: NBernard Zhao <bernard@vivo.com>

Changes since V1:
*get rid of dal_ddc_i2c_payloads_destroy, call
dal_vector_destruct() directly.

Link for V1:
*https://lore.kernel.org/patchwork/patch/1309014/Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Change the comment typo: "programm" -> "program".
Signed-off-by: NBernard Zhao <bernard@vivo.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Change the comment typo: "programm" -> "program".
Signed-off-by: NBernard Zhao <bernard@vivo.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Added IP block section to amdgpu.rst.
Added more documentation to amd_ip_funcs.
Created documentation for amd_ip_block_type.

v2: Provides a more detailed DOC section on IP blocks
v3: Clarifies the IP block list. Adds info on IP block enumeration.
Signed-off-by: NRyan Taylor <ryan.taylor@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

mmHDP_READ_CACHE_INVALIDATE register is in HDP not in NBIO
Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update driver if file for sienna cichlid.
Signed-off-by: NLikun Gao <Likun.Gao@amd.com>
Reviewed-by: NJiansong Chen <Jiansong.Chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As this is already set inside the implementation of
smu_set_watermarks_table().
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As they have no real dependence. And for Navi1x, the socclk/uclk dpms
are enabled after DAL initialization.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Otherwise, that will be always true for Navi14.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GCEA/MMHUB EA error should not result to DF freeze, this is
fixed in next generation, but for some reasons the GCEA/MMHUB
EA error will result to DF freeze in previous generation,
diver should avoid to indicate GCEA/MMHUB EA error as hw fatal
error in kernel message by read GCEA/MMHUB err status registers.

Changed from V1:
    make query_ras_error_status function more general
    make read mmhub er status register more friendly

Changed from V2:
    move ras error status query function into do_recovery workqueue

Changed from V3:
    remove useless code from V2, print GCEA error status
    instance number
Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM.
Suggested-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NSudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Different mclk dpm policy will be applied based on the VRAM
width.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Simplify the return expression.
Signed-off-by: NLiu Shixin <liushixin2@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Simplify the return expression.
Signed-off-by: NLiu Shixin <liushixin2@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Simplify the return expression.
Signed-off-by: NQinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Simplify the return expression.
Signed-off-by: NQinglang Miao <miaoqinglang@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Update clock only when non-seamless boot stream exists
creates regression on multiple scenerios.

[How]
Update clock in two conditions
1. Non-seamless boot stream exist.
2. Stream_count = 0

Fixes: 598c13b2 ("drm/amd/display: update clock when non-seamless boot stream exist")
Signed-off-by: NLewis Huang <Lewis.Huang@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>