Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Depending on the Codec, the the BCLK/LRCLK ratio might not be freely
chosen by the CPU DAI.

For example, some Codec might want to be supplied with 32-bit samples
for both its channels regardless of the actual audio word size the CPU
sends. In such cases, the rest of the bits on the data lines must be
padded with zeros:

          _______________________________
LRCLK    /                               \
      --'                                 `---------- .....

BCLK  ||||||||||||||||||||||||||||||||||||||||||||||| .....

DATA  ____||||||||||||||||_________________|||||||||| .....

          |<--  data  -->|<--   pads  --> |

This patch adds a new clock divider to configure the BCLK/LRCLK ratio.
If the machine code uses that divider, the driver uses the specified
value, instead of deriving that information from the audio word size.

Otherwise, the original behaviour is retained.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Change davinci_config_channel_size() to derive the values for XSSZ and
XROT in DAVINCI_MCASP_[RT]XFMT_REG from the configured word length
rather than hard-coding them in a switch/case block.

Also, by directly passing the word length to
davinci_config_channel_size(), we can get rid of the
DAVINCI_AUDIO_WORD_* enum.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

codec_fmt and sample_rate variables are unused in both snd_platform_data
and davinci_audio_dev, so drop them.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Useful for diagnostics.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

So the code to suppress duplicate changes is effective.

Reported-by: Kyung Kwee Ryu <Kyung-Kwee.Ryu@wolfsonmicro.comyu@wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Provide robustness against low quality FLL sync clocks by increasing the
timeout for lock to an absurdly high point; we should never get anywhere
near hitting the timeout in a real system unless it is failing.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The machine driver try to use GPIO15 of twl4030 for HS MUX which supposed to
select between TWL's HSOL/R and tlv320aic3254's HPL/R.
The TWL's GPIO allocated dynamically so the (OMAP_MAX_GPIO_LINES + 15) is no
longer valid GPIO number causing a kernel crash due to BUG_ON()
Also the current machine driver supports only TWL audio currently: there is
no need to control the GPIO.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Use of devm_regmap_init_spi does not require an explicit
regmap_exit call.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

For simplicity always run the DSP at the SYSCLK rate.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Turn off the ADSP memory when we aren't using it, saving a small amount of
power.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Specify overrun bit in interrupt mask
Add dmaengine specific routines
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
[voice.shen@atmel.com: adapt to soc dmaengine framework]
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch is split original atmel-pcm.c into new atmel-pcm.c and
atmel-pcm-pdc.c two files. The new atmel-pcm.c is the share routine
while will be used for pdc or dma transfer.

Using SND_ATMEL_SOC_PDC to select using PDC for audio transfer
Signed-off-by: NBo Shen <voice.shen@atmel.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some compiler versions complain.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Handle the jack detection inforamtion as bool from devicetree.
Signed-off-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

devm_regmap_init_i2c() is device managed and makes error
handling and code cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

devm_regmap_init_i2c() is device managed and makes error
handling and code cleanup simpler.
Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some ADSP devices can make use of DVFS to optimise power consumption
depending on the operating frequency of the DSP core. Implement
support for this in the generic ADSP code.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Provide a haptics widget for use by the haptics driver and expose the DAPM
context for it.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Provide a haptics widget for use by the haptics driver and expose the DAPM
context for it.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Otherwise we skip reenables.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

We cannot include any plat or mach headers for the multiplatform
support.

Fix the issue by defining local mcbsp_omap1().
Signed-off-by: NTony Lindgren <tony@atomide.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Hi Mark,

thanks your insisting on a better description for the patch, I found a
more appropriate solution for the problem:

Compiling the SoC Audio driver for Freescale i.MX as a module
(CONFIG_SND_SOC_IMX_PCM=m) results in a non-functional sound driver
indicated by the error message:
| imx-sgtl5000 sound.1: platform imx-pcm-audio not registered
| imx-sgtl5000 sound.1: snd_soc_register_card failed (-517)
| platform sound.1: Driver imx-sgtl5000 requests probe deferral
instead of the message:
| imx-sgtl5000 sound.1:  sgtl5000 <-> 63fcc000.ssi mapping ok
that is to be expected upon loading the snd-soc-imx-pcm.ko module.

The build log reveals, that the file imx-pcm-dma.o (or imx-pcm-fiq.o
depending on the kernel configuration), which should be linked
together with imx-pcm.o into snd-imx-pcm.ko, is not being compiled in
this case.

The make rules for these files shows that the target object imx-pcm.o
is assigned to the variable snd-soc-imx-pcm-y while
imx-pcm-{dma,fiq}.o are added to to
snd-soc-imx-pcm-$(CONFIG_SND_SOC_IMX_PCM_DMA) and
snd-soc-imx-pcm-$(CONFIG_SND_SOC_IMX_PCM_FIQ) which resolve to
snd-soc-imx-pcm-m in this case.

According to Documentation/kbuild/modules.txt:
|When the module is built from multiple sources, an additional line is
|needed listing the files:
|
|        <module_name>-y := <src1>.o <src2>.o ...
Thus the type of the config variables CONFIG_SND_SOC_IMX_PCM_DMA and
CONFIG_SND_SOC_IMX_PCM_FIQ should be 'bool' instead of 'tristate' to
resolve to 'y' when selected.
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Due to a broken make rule, sound/soc/fsl/imx-pcm-dma.c or
sound/soc/fsl/imx-pcm-fiq.c (whatever is selected via Kconfig) will
not be compiled into imx-pcm.o when building as module, i.e.:
CONFIG_SND_SOC_IMX_PCM=m
CONFIG_SND_SOC_IMX_PCM_DMA=m
resulting in a non-functional sound driver.

This gives the error messages:
| imx-sgtl5000 sound.1: platform imx-pcm-audio not registered
| imx-sgtl5000 sound.1: snd_soc_register_card failed (-517)
| platform sound.1: Driver imx-sgtl5000 requests probe deferral
when loading the driver instead of what's to be expected:
| imx-sgtl5000 sound.1:  sgtl5000 <-> 63fcc000.ssi mapping ok
Signed-off-by: NLothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Some devices support higher clock rates, allow users to select these.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

I forgot this again...  codec->in_pm is in #ifdef CONFIG_PM
Reported-by: NMarkus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTushar Behera <tushar.behera@linaro.org>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This device doesn't have a pdata definition for legacy boards, and
unless anyone need to control the reset GPIO, it's not worth adding one.
So this feature is only available to DT users for now.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>