- 26 7月, 2007 19 次提交
-
-
由 Sam Ravnborg 提交于
We already check and warn about section mismatches from vmlinux (build as vmlinux.o) during first pass so skip the checks during the 2nd pass where we process modules. Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: null-terminate context string in selinux_xfrm_sec_ctx_alloc
-
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source ACPI: quiet ACPI Exceptions due to no _PTC or _TSS ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86 ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers ACPI: autoload modules - Create ACPI alias interface ACPI: autoload modules - ACPICA modifications ACPI: asus-laptop: Fix failure exits ACPI: fix oops due to typo in new throttling code ACPI: ignore _PSx method for hotplugable PCI devices ACPI: Use ACPI methods to select PCI device suspend state ACPI, PNP: hook ACPI D-state to PNP suspend/resume ACPI: Add acpi_pm_device_sleep_state helper routine ACPI: Implement the set_target() callback from pm_ops
-
由 Greg Ungerer 提交于
Currently most of the m68knommu cpu/board setup files are handling the setup of fixed boot parameters (via CONFIG_BOOTPARAM) themselves. Move all this into the common setup code. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Fix types used for reset register address setup. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Add configure support for the Intec Wildfire and WildFireMod boards. Signed-Off-By: NSteve Bennett <steveb@workware.net.au> Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
It is useless to preserve THREAD_SR in `resume'. The real user's sr is actually in the stack. We also don't need to disable interrupts : we'll never be in an invalid state, the sp switch is atomic. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Need an include/asm-m68knommu/hw_irq.h for kernel/hrtimer.c Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Philippe De Muyter 提交于
Fix a small typo in the definition of MCFDMA_DIR_INV (MCF5272 specific). Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Add build support for the new Arcturus boards. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Need to explicitly include linux/device.h. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
CLOCK_TICK_RATE should give the underlying frequency of the tick timer, to make ntp happy. For Coldfires, that's the main clock. Signed-off-by: NPhilippe De Muyter <phdm@macqel.be> Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Wu 提交于
Add configure support for the Arcturus UC5272 and UC5282 boards. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Fix workqueues in 68328 serial driver. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Greg Ungerer 提交于
Remove the legacy power management code from the 68328 serial driver. It is not used, and there is no current kernel support for power management on the 68328. Signed-off-by: NGreg Ungerer <gerg@uclinux.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: disable writeback for 0x0f 0x01 instructions. KVM: Fix removal of nx capability from guest cpuid Revert "KVM: Avoid useless memory write when possible" KVM: Fix unlikely kvm_create vs decache_vcpus_on_cpu race KVM: Correctly handle writes crossing a page boundary
-
由 john stultz 提交于
This avoids xtime lag seen with dynticks, because while 'xtime' itself is still not updated often, we keep a 'xtime_cache' variable around that contains the approximate real-time that _is_ updated each time we do a 'update_wall_time()', and is thus never off by more than one tick. IOW, this restores the original semantics for 'xtime' users, as long as you use the proper abstraction functions (ie 'current_kernel_time()' or 'get_seconds()' depending on whether you want a timespec or just the seconds field). [ Updated Patch. As penance for my sins I've also yanked another #ifdef that was added to avoid the xtime lag w/ hrtimers. ] Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 john stultz 提交于
This avoids use of the kernel-internal "xtime" variable directly outside of the actual time-related functions. Instead, use the helper functions that we already have available to us. This doesn't actually change any behaviour, but this will allow us to fix the fact that "xtime" isn't updated very often with CONFIG_NO_HZ (because much of the realtime information is maintained as separate offsets to 'xtime'), which has caused interfaces that use xtime directly to get a time that is out of sync with the real-time clock by up to a third of a second or so. Signed-off-by: NJohn Stultz <johnstul@us.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Venkat Yekkirala 提交于
xfrm_audit_log() expects the context string to be null-terminated which currently doesn't happen with user-supplied contexts. Signed-off-by: NVenkat Yekkirala <vyekkirala@TrustedCS.com> Acked-by: NStephen Smalley <sds@tycho.nsa.gov> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 25 7月, 2007 21 次提交
-
-
由 Aurelien Jarno 提交于
0x0f 0x01 instructions (ie lgdt, lidt, smsw, lmsw and invlpg) does not use writeback. This patch set no_wb=1 when emulating those instructions. This fixes a regression booting the FreeBSD kernel on AMD. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Testing the wrong bit caused kvm not to disable nx on the guest when it is disabled on the host (an mmu optimization relies on the nx bits being the same in the guest and host). This allows Windows to boot when nx is disabled on te host (e.g. when host pae is disabled). Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
This reverts commit a3c870bd. While it does save useless updates, it (probably) defeats the fork detector, causing a massive performance loss. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Rusty Russell 提交于
We add the kvm to the vm_list before initializing the vcpu mutexes, which can be mutex_trylock()'ed by decache_vcpus_on_cpu(). Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Avi Kivity 提交于
Writes that are contiguous in virtual memory may not be contiguous in physical memory; so split writes that straddle a page boundary. Thanks to Aurelien for reporting the bug, patient testing, and a fix to this very patch. Signed-off-by: NAurelien Jarno <aurelien@aurel32.net> Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Len Brown 提交于
-
由 Len Brown 提交于
Conflicts: drivers/acpi/sleep/main.c Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
-
由 Len Brown 提交于
As it was a synonym for (CONFIG_ACPI && CONFIG_X86), the ifdefs for it were more clutter than they were worth. For ia64, just add a few stubs in anticipation of future S3 or S4 support. Signed-off-by: NLen Brown <len.brown@intel.com>
-
由 Len Brown 提交于
ACPI Exception (processor_throttling-0084): AE_NOT_FOUND, Evaluating _PTC [20070126] ACPI Exception (processor_throttling-0147): AE_NOT_FOUND, Evaluating _TSS [20070126] These methods are optional, so Linux should not alarm users when they are not found. http://bugzilla.kernel.org/show_bug.cgi?id=8802Signed-off-by: NLen Brown <len.brown@intel.com> Acked-by: NLuming Yu <luming.yu@intel.com>
-
由 Linus Torvalds 提交于
* 'for_paulus' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc: (25 commits) [POWERPC] 85xx: Added needed MPC85xx PCI device IDs [POWERPC] Add Freescale PCI VENDOR ID and 8641 device IDs [POWERPC] 85xxCDS: MPC8548 DTS cleanup. [POWERPC] 85xxCDS: Misc 8548 PCI Corrections. [POWERPC] 85xxCDS: Delay 8259 cascade hookup. [POWERPC] 85xxCDS: Make sure restart resets the PCI bus. [POWERPC] 85xxCDS: Allow 8259 cascade to share an MPIC interrupt line. [POWERPC] FSL: Add support for PCI-X controllers [POWERPC] Make sure virtual P2P bridge registers are setup on PCIe PHB [POWERPC] Provide ability to setup P2P bridge registers from struct resource [POWERPC] Add basic PCI/PCI Express support for 8544DS board [POWERPC] Make endianess of cfg_addr for indirect pci ops runtime [POWERPC] Removed setup_indirect_pci_nomap [POWERPC] 85xx: Add quirk to ignore bogus FPGA on CDS [POWERPC] 85xx: Added 8568 PCIe support [POWERPC] Fixup resources on pci_bus for PCIe PHB when no device is connected [POWERPC] Add basic PCI node for mpc8568mds board [POWERPC] Use Freescale pci/pcie common code for 85xx boards [POWERPC] Update PCI nodes in the 83xx/85xx boards device tree [POWERPC] Add 8548 CDS PCI express controller node and PCI-X device node ...
-
由 Jens Axboe 提交于
kunmap_atomic() takes the virtual address, not the mapped page as argument. Signed-off-by: NJens Axboe <jens.axboe@oracle.com> Cc: Mark Fasheh <mark.fasheh@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] Fix marge error due to conflict in arch/mips/kernel/head.S [MIPS] ARC: Remove unused arch/mips/arc/console.c [MIPS] SNI: sniprom [MIPS] Jazz: remove unneeded reset functions [MIPS] Whitespace cleanup. [MIPS] Make resources for ds1742 "static __initdata" [MIPS] Replace __attribute_used__ with __used [MIPS] Jazz: Remove unused arch/mips/jazz/io.c [MIPS] Mark prom_free_prom_memory as __init_refok [MIPS] MIPSsim: Fix cflags
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: pata_hpt37x: Fix 2.6.22 clock PLL regression pata_ali: Correct HP detect ata_piix: fix suspend/resume for some TOSHIBA laptops PCI: export __pci_reenable_device()
-
由 Linus Torvalds 提交于
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (26 commits) netdev: i82596 Ethernet needs <asm/cacheflush.h> forcedeth: mcp73 device addition forcedeth: new device ids in pci_ids.h atl1: make atl1_init_ring_ptrs static eHEA: net_poll support drivers/net/acenic.c: fix check-after-use defxx: Use __maybe_unused rather than a local hack Fix error checking in Vitesse IRQ config ps3: reduce allocation size of rx skb buffers atl1: use kernel provided ethernet length constants atl1: fix typo in dma_req_block atl1: change cmb write threshold atl1: fix typo in DMA engine setup atl1: change tpd_avail function name ps3: fix rare issue that reenabling rx DMA fails ps3: removed calling netif_poll_enable() in open() ps3: use ethX as the name of irq ps3: use net_device_stats of net_device structure ps3: removed conditional ethtool support ps3: removed defines no longer used ...
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Mark most of initial bootup asm as .text.init.ref_ok [SPARC32]: Fix bug in sparc optimized memset. [SPARC64]: Update defconfig. [SPARC]: Add missing NOTES section. [SPARC32]: missing exports [SPARC32]: Deal with rtc/sun_mostek_rtc conflict.
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [8021Q]: vlan_ioctl_handler: fix return value [GENETLINK]: Correctly report errors while registering a multicast group [GENETLINK]: Fix adjustment of number of multicast groups [GENETLINK]: Fix race in genl_unregister_mc_groups() [NETFILTER]: Clean up duplicate includes in net/netfilter/ [NETFILTER]: Clean up duplicate includes in net/bridge/ [NETFILTER]: Fix logging regression [TCPv6] MD5SIG: Ensure to reset allocation count to avoid panic.
-
由 Andrew Morton 提交于
net/8021q/vlan.c: In function 'vlan_ioctl_handler': net/8021q/vlan.c:700: warning: 'err' may be used uninitialized in this function The warning is incorrect, but from my reading this ioctl will return -EINVAL on success. Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
The current calculation of the maximum number of genetlink multicast groups seems odd, fix it. Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Thomas Graf 提交于
family->mcast_groups is protected by genl_lock so it must be held while accessing the list in genl_unregister_mc_groups(). Requires adding a non-locking variant of genl_unregister_mc_group(). Signed-off-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-