- 15 2月, 2011 1 次提交
-
-
由 Jesper Juhl 提交于
Remove duplicate inclusion of "send.h" and "routing.h" from net/batman-adv/soft-interface.c Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
- 12 2月, 2011 3 次提交
-
-
由 Linus Lüssing 提交于
For a host in the mesh network, the batman layer should be transparent. However, we had one exception, data packets within the mesh network which have the same destination as a originator are being routed to that node, although there is no host that node's bat0 interface and therefore gets dropped anyway. This commit removes this exception. Signed-off-by: NLinus Lüssing <linus.luessing@ascom.ch> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Linus Lüssing 提交于
types.h is included by main.h, which is included at the beginning of any other c-file anyway. Therefore this commit removes those duplicate inclussions. Signed-off-by: NLinus Lüssing <linus.luessing@ascom.ch> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Marek Lindner 提交于
Multiple variable declarations in a single statements over multiple lines can be split into multiple variable declarations without changing the actual behavior. Signed-off-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
- 11 2月, 2011 1 次提交
-
-
由 Sven Eckelmann 提交于
The two fragments of an unicast packet must have successive sequence numbers to allow the receiver side to detect matching fragments and merge them again. The current implementation doesn't provide that property because a sequence of two atomic_inc_return may be interleaved with another sequence which also changes the variable. The access to the fragment sequence number pool has either to be protected by correct locking or it has to reserve two sequence numbers in a single fetch. The latter one can easily be done by increasing the value of the last used sequence number by 2 in a single step. The generated window of two currently unused sequence numbers can now be scattered across the two fragments. Reported-by: NLinus Lüssing <linus.luessing@web.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
- 31 1月, 2011 9 次提交
-
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
batman_skb_recv can be defined in hard-interface.c as static because it is never used outside of that file. Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Simon Wunderlich 提交于
Some function parameters are obsolete now and can be removed. Reported-by: NSven Eckelmann <sven@narfation.org> Signed-off-by: NSimon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
The routing algorithm must be able to decide if a fragment can be merged with the missing part and still be passed to a forwarding interface. The fragments can only differ by one byte in case that the original payload had an uneven length. In that situation the sender has to inform all possible receivers that the tail is one byte longer using the flag UNI_FRAG_LARGETAIL. The combination of UNI_FRAG_LARGETAIL and UNI_FRAG_HEAD flag makes it possible to calculate the correct length for even and uneven sized payloads. The original formula missed to add the unicast header at all and forgot to remove the fragment header of the second fragment. This made the results highly unreliable and only useful for machines with large differences between the configured MTUs. Reported-by: NRussell Senior <russell@personaltelco.net> Reported-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
由 Sven Eckelmann 提交于
The routing algorithm must know how large two fragments are to be able to decide that it is safe to merge them or if it should resubmit without waiting for the second part. When these two fragments have a too different size, it is not possible to guess right in every situation. The user could easily configure the MTU of the attached cards so that one fragment is forwarded and the other one is added to the fragments table to wait for the missing part. For even sized packets, it is possible to split it so that the resulting packages are equal sized by ignoring the old non-fragment header at the beginning of the original packet. This still creates different sized fragments for uneven sized packets. Reported-by: NRussell Senior <russell@personaltelco.net> Reported-by: NMarek Lindner <lindner_marek@yahoo.de> Signed-off-by: NSven Eckelmann <sven@narfation.org>
-
- 22 1月, 2011 16 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6由 Linus Torvalds 提交于
* 'media_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (101 commits) [media] staging/lirc: fix mem leaks and ptr err usage [media] hdpvr: reduce latency of i2c read/write w/recycled buffer [media] hdpvr: enable IR part [media] rc/mceusb: timeout should be in ns, not us [media] v4l2-device: fix 'use-after-freed' oops [media] v4l2-dev: don't memset video_device.dev [media] zoran: use video_device_alloc instead of kmalloc [media] w9966: zero device state after a detach [media] v4l: Fix a use-before-set in the control framework [media] v4l: Include linux/videodev2.h in media/v4l2-ctrls.h [media] DocBook/v4l: update V4L2 revision and update copyright years [media] DocBook/v4l: fix validation error in dev-rds.xml [media] v4l2-ctrls: queryctrl shouldn't attempt to replace V4L2_CID_PRIVATE_BASE IDs [media] v4l2-ctrls: fix missing 'read-only' check [media] pvrusb2: Provide more information about IR units to lirc_zilog and ir-kbd-i2c [media] ir-kbd-i2c: Add back defaults setting for Zilog Z8's at addr 0x71 [media] lirc_zilog: Update TODO.lirc_zilog [media] lirc_zilog: Add Andy Walls to copyright notice and authors list [media] lirc_zilog: Remove useless struct i2c_driver.command function [media] lirc_zilog: Remove unneeded tests for existence of the IR Tx function ...
-
由 David Howells 提交于
Fix up comments in the key management code. No functional changes. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Howells 提交于
Do a bit of a style clean up in the key management code. No functional changes. Done using: perl -p -i -e 's!^/[*]*/\n!!' security/keys/*.c perl -p -i -e 's!} /[*] end [a-z0-9_]*[(][)] [*]/\n!}\n!' security/keys/*.c sed -i -s -e ": next" -e N -e 's/^\n[}]$/}/' -e t -e P -e 's/^.*\n//' -e "b next" security/keys/*.c To remove /*****/ lines, remove comments on the closing brace of a function to name the function and remove blank lines before the closing brace of a function. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix up CIFSSMBEcho for unaligned access cifs: fix unaligned accesses in cifsConvertToUCS cifs: clean up unaligned accesses in cifs_unicode.c cifs: fix unaligned access in check2ndT2 and coalesce_t2 cifs: clean up unaligned accesses in validate_t2 cifs: use get/put_unaligned functions to access ByteCount cifs: move time field in cifsInodeInfo cifs: TCP_Server_Info diet CIFS: Implement cifs_strict_readv (try #4) CIFS: Implement cifs_file_strict_mmap (try #2) CIFS: Implement cifs_strict_fsync CIFS: Make cifsFileInfo_put work with strict cache mode
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: x86,percpu: Move out of place 64 bit ops into X86_64 section
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: note the nested NOT_RUNNING test in worker_clr_flags() isn't a noop workqueue: relax lockdep annotation on flush_work()
-
由 Linus Torvalds 提交于
Merge branch 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits) um: Use generic irq Kconfig tile: Use generic irq Kconfig sparc: Use generic irq Kconfig score: Use generic irq Kconfig powerpc: Use generic irq Kconfig parisc: Use generic irq Kconfig mn10300: Use generic irq Kconfig microblaze: Use generic irq Kconfig m68knommu: Use generic irq Kconfig ia64: Use generic irq Kconfig frv: Use generic irq Kconfig blackfin: Use generic irq Kconfig alpha: Use generic irq Kconfig genirq: Remove __do_IRQ m32r: Convert to generic irq Kconfig m32r: Convert usrv platform irq handling m32r: Convert opsput_lcdpld irq chip m32r: Convert opsput lanpld irq chip m32r: Convert opsput pld irq chip m32r: Convert opsput irq chip ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen由 Linus Torvalds 提交于
* 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: p2m: correctly initialize partial p2m leaf xen: fix non-ANSI function warning in irq.c
-
由 Linus Torvalds 提交于
Merge branches 'fixes' and 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: core: fix unstable I/O with Canon camcorder * 'fwnet' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: net: is not experimental anymore firewire: net: invalidate ARP entries of removed nodes
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix EAPD to low on CZC P10T tablet computer with ALC662 ALSA: HDA: Add SKU ignore for another Thinkpad Edge 14 ALSA: hda - Fix "unused variable" compile warning ALSA: hda - Add quirk for HP Z-series workstation Revert "ALSA: HDA: Create mixers on ALC887" ASoC: PXA: Fix codec address on Zipit Z2 ASoC: PXA: Fix jack detection on Zipit Z2 ASoC: Blackfin: fix DAI/SPORT config dependency issues ASoC: Blackfin TDM: use external frame syncs ASoC: Blackfin AC97: fix build error after multi-component update ASoC: Blackfin TDM: fix missed snd_soc_dai_get_drvdata update ASoC: documentation updates ALSA: ice1712 delta - initialize SPI clock
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/83xx: fix build failures on dt compatible list.
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc/mpic: Fix mask/unmask timeout message powerpc/pseries: Add BNX2=m to defconfig powerpc: Enable 64kB pages and 1024 threads in pseries config powerpc: Disable mcount tracers in pseries defconfig powerpc/boot/dts: Install dts from the right directory powerpc: machine_check_generic is wrong on 64bit powerpc: Check RTAS extended log flag before checking length powerpc: Fix corruption when grabbing FWNMI data powerpc: Rework pseries machine check handler powerpc: Don't silently handle machine checks from userspace powerpc: Remove duplicate debugger hook in machine_check_exception powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check powerpc: Don't force MSR_RI in machine_check_exception powerpc: Print 32 bits of DSISR in show_regs powerpc/kdump: Disable ftrace during kexec powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler powerpc/kexec: Remove empty ppc_md.machine_kexec_prepare powerpc/kexec: Don't initialise kexec hooks to default handlers powerpc/kdump: Remove ppc_md.machine_crash_shutdown powerpc/kexec: Remove ppc_md.machine_kexec ...
-
由 Michal Simek 提交于
The patch "thp: export maybe_mkwrite" (commit 14fd403f) breaks systems without MMU. Error log: CC arch/microblaze/mm/init.o In file included from include/linux/mman.h:14, from arch/microblaze/mm/consistent.c:24: include/linux/mm.h: In function 'maybe_mkwrite': include/linux/mm.h:482: error: implicit declaration of function 'pte_mkwrite' include/linux/mm.h:482: error: incompatible types in assignment Signed-off-by: NMichal Simek <monstr@monstr.eu> CC: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: NRik van Riel <riel@redhat.com> CC: Andrew Morton <akpm@linux-foundation.org> CC: Ingo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Roland Dreier 提交于
The cisco.com address will stop working soon, and besides no one can remember the second "d" in "rolandd" or how to spell "rdreier." Signed-off-by: NRoland Dreier <rolandd@cisco.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefan Bader 提交于
After changing the p2m mapping to a tree by commit 58e05027 xen: convert p2m to a 3 level tree and trying to boot a DomU with 615MB of memory, the following crash was observed in the dump: kernel direct mapping tables up to 26f00000 @ 1ec4000-1fff000 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c0107397>] xen_set_pte+0x27/0x60 *pdpt = 0000000000000000 *pde = 0000000000000000 Adding further debug statements showed that when trying to set up pfn=0x26700 the returned mapping was invalid. pfn=0x266ff calling set_pte(0xc1fe77f8, 0x6b3003) pfn=0x26700 calling set_pte(0xc1fe7800, 0x3) Although the last_pfn obtained from the startup info is 0x26700, which should in turn not be hit, the additional 8MB which are added as extra memory normally seem to be ok. This lead to looking into the initial p2m tree construction, which uses the smaller value and assuming that there is other code handling the extra memory. When the p2m tree is set up, the leaves are directly pointed to the array which the domain builder set up. But if the mapping is not on a boundary that fits into one p2m page, this will result in the last leaf being only partially valid. And as the invalid entries are not initialized in that case, things go badly wrong. I am trying to fix that by checking whether the current leaf is a complete map and if not, allocate a completely new page and copy only the valid pointers there. This may not be the most efficient or elegant solution, but at least it seems to allow me booting DomUs with memory assignments all over the range. BugLink: http://bugs.launchpad.net/bugs/686692 [v2: Redid a bit of commit wording and fixed a compile warning] Signed-off-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 21 1月, 2011 10 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: quota: Fix deadlock during path resolution
-
由 Thomas Gleixner 提交于
No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jeff Dike <jdike@addtoit.com>
-
由 Thomas Gleixner 提交于
No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NChris Metcalf <cmetcalf@tilera.com>
-
由 Thomas Gleixner 提交于
No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: N"David S. Miller" <davem@davemloft.net>
-
由 Thomas Gleixner 提交于
No functional change Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NChen Liqin <liqin.chen@sunplusct.com>
-
由 Thomas Gleixner 提交于
No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Thomas Gleixner 提交于
No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: NJames Bottomley <James.Bottomley@HansenPartnership.com>
-
由 Thomas Gleixner 提交于
No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NDavid Howells <dhowells@redhat.com>
-
由 Thomas Gleixner 提交于
No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NMichal Simek <monstr@monstr.eu>
-
由 Thomas Gleixner 提交于
No functional change. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Greg Ungerer <gerg@uclinux.org>
-