- 14 12月, 2018 3 次提交
-
-
由 Chao Yu 提交于
This patch reorders flow from - update page - set_page_dirty - wait_on_page_writeback to - wait_on_page_writeback - update page - set_page_dirty The reason is: - set_page_dirty will increase reference of dirty page, the reference should be cleared before wait_on_page_writeback to keep its consistency. - some devices need stable page during page writebacking, so we should not change page's data. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Sheng Yong 提交于
If IPU failed, nothing is commited, we should end page writeback. Signed-off-by: NSheng Yong <shengyong1@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This adds an option in ioctl(F2FS_IOC_SHUTDOWN) in order to trigger fsck by setting a NEED_FSCK flag. Generally, shutdown is used for the test to validate filesystem consistency, and setting NEED_FSCK flag can be used for Android to trigger fsck.f2fs at boot time explicitly so that we could measure the elapsed time as well as force filesystem check. Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 28 11月, 2018 1 次提交
-
-
由 Jaegeuk Kim 提交于
If we want to re-enable nat_bits, we rely on fsck which requires full scan of directory tree. Let's do that by regular fsck or unclean shutdown. Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 27 11月, 2018 25 次提交
-
-
由 Jia Zhu 提交于
Previously, we added a parameter @map.m_may_create to trigger OPU allocation and call f2fs_balance_fs() correctly. But in get_more_blocks(), @create has been overwritten by below code. So the function f2fs_map_blocks() will not allocate new block address but directly go out. Meanwile,there are several functions calling f2fs_map_blocks() directly and @map.m_may_create not initialized. CODE: create = dio->op == REQ_OP_WRITE; if (dio->flags & DIO_SKIP_HOLES) { if (fs_startblk <= ((i_size_read(dio->inode) - 1) >> i_blkbits)) create = 0; } This patch fixes it. Signed-off-by: NJia Zhu <zhujia13@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jia Zhu 提交于
Previously, we allocated a new block address for OPU mode in direct_IO. But the new address couldn't be assigned to @map->m_pblk correctly. This patch fix it. Cc: <stable@vger.kernel.org> Fixes: 511f52d02f05 ("f2fs: allow out-place-update for direct IO in LFS mode") Signed-off-by: NJia Zhu <zhujia13@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Sahitya Tummala 提交于
Adjust the trace print in f2fs_get_victim() to cover GC done by F2FS_IOC_GARBAGE_COLLECT_RANGE. Signed-off-by: NSahitya Tummala <stummala@codeaurora.org> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Sahitya Tummala 提交于
Allow node type segments also to be GC'd via f2fs ioctl F2FS_IOC_GARBAGE_COLLECT_RANGE. Signed-off-by: NSahitya Tummala <stummala@codeaurora.org> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Alexey Dobriyan 提交于
Those strings are immutable. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Pan Bian 提交于
The function truncate_node frees the page with f2fs_put_page. However, the page index is read after that. So, the patch reads the index before freeing the page. Fixes: bf39c00a ("f2fs: drop obsolete node page when it is truncated") Cc: <stable@vger.kernel.org> Signed-off-by: NPan Bian <bianpan2016@163.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Tiezhu Yang 提交于
When call f2fs_acl_create_masq() failed, the caller f2fs_acl_create() should return -EIO instead of -ENOMEM, this patch makes it consistent with posix_acl_create() which has been fixed in commit beaf226b ("posix_acl: don't ignore return value of posix_acl_create_masq()"). Fixes: 83dfe53c ("f2fs: fix reference leaks in f2fs_acl_create") Signed-off-by: NTiezhu Yang <kernelpatch@126.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
After merging the f2fs tree, today's linux-next build (x86_64_allmodconfig) produced this warning: In file included from fs/f2fs/dir.c:11: fs/f2fs/f2fs.h: In function '__mark_inode_dirty_flag': fs/f2fs/f2fs.h:2388:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (set) ^ fs/f2fs/f2fs.h:2390:2: note: here case FI_DATA_EXIST: ^~~~ Exposed by my use of -Wimplicit-fallthrough Reported-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Sheng Yong 提交于
The following race could lead to inconsistent SIT bitmap: Task A Task B ====== ====== f2fs_write_checkpoint block_operations f2fs_lock_all down_write(node_change) down_write(node_write) ... sync ... up_write(node_change) f2fs_file_write_iter set_inode_flag(FI_NO_PREALLOC) ...... f2fs_write_begin(index=0, has inline data) prepare_write_begin __do_map_lock(AIO) => down_read(node_change) f2fs_convert_inline_page => update SIT __do_map_lock(AIO) => up_read(node_change) f2fs_flush_sit_entries <= inconsistent SIT finish write checkpoint sudden-power-off If SPO occurs after checkpoint is finished, SIT bitmap will be set incorrectly. Signed-off-by: NSheng Yong <shengyong1@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If namelen is corrupted to have very long value, fill_dentries can copy wrong memory area. Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlong Song 提交于
Previously, when f2fs finds which temp bio cache owns the target page, it will flush all the three temp bio caches, but we only need to flush one single bio cache indeed, which can help to keep bio merged. Signed-off-by: NYunlong Song <yunlong.song@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In get_more_blocks(), we may override @create as below code: create = dio->op == REQ_OP_WRITE; if (dio->flags & DIO_SKIP_HOLES) { if (fs_startblk <= ((i_size_read(dio->inode) - 1) >> i_blkbits)) create = 0; } But in f2fs_map_blocks(), we only trigger f2fs_balance_fs() if @create is 1, so in LFS mode, dio overwrite under LFS mode can easily run out of free segments, result in below panic. Call Trace: allocate_segment_by_default+0xa8/0x270 [f2fs] f2fs_allocate_data_block+0x1ea/0x5c0 [f2fs] __allocate_data_block+0x306/0x480 [f2fs] f2fs_map_blocks+0x6f6/0x920 [f2fs] __get_data_block+0x4f/0xb0 [f2fs] get_data_block_dio_write+0x50/0x60 [f2fs] do_blockdev_direct_IO+0xcd5/0x21e0 __blockdev_direct_IO+0x3a/0x3c f2fs_direct_IO+0x1ff/0x4a0 [f2fs] generic_file_direct_write+0xd9/0x160 __generic_file_write_iter+0xbb/0x1e0 f2fs_file_write_iter+0xaf/0x220 [f2fs] __vfs_write+0xd0/0x130 vfs_write+0xb2/0x1b0 SyS_pwrite64+0x69/0xa0 ? vtime_user_exit+0x29/0x70 do_syscall_64+0x6e/0x160 entry_SYSCALL64_slow_path+0x25/0x25 RIP: new_curseg+0x36f/0x380 [f2fs] RSP: ffffac570393f7a8 So this patch introduces a parameter map.m_may_create to indicate that f2fs_map_blocks() is called from write or read path, which can give the right hint to let f2fs_map_blocks() trigger OPU allocation and call f2fs_balanc_fs() correctly. BTW, it disables physical address preallocation for direct IO in f2fs_preallocate_blocks, which is redundant to OPU allocation of f2fs_map_blocks. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch adds missing in-flight discard/preflush/dio command count check in is_idle(). Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch adds f2fs_dio_submit_bio() to hook submit_io/end_io functions in direct IO path, in order to account DIO. Later, we will add this count into is_idle() to let background GC/Discard thread be aware of DIO. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlei He 提交于
This patch move dir data flush to write checkpoint process, by doing this, it may reduce some time for dir fsync. pre: -f2fs_do_sync_file enter -file_write_and_wait_range <- flush & wait -write_checkpoint -do_checkpoint <- wait all -f2fs_do_sync_file exit now: -f2fs_do_sync_file enter -write_checkpoint -block_operations <- flush dir & no wait -do_checkpoint <- wait all -f2fs_do_sync_file exit Signed-off-by: NYunlei He <heyunlei@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yangtao Li 提交于
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: NYangtao Li <tiny.windzz@gmail.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlong Song 提交于
f2fs_ioc_gc_range skips blocks_per_seg each time, however, f2fs_gc moves blocks of section each time, so fix it from segment to section. Signed-off-by: NYunlong Song <yunlong.song@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Add one sysfs entry to control migration granularity of GC in large section f2fs, it can be tuned to mitigate heavy overhead of migrating huge number of blocks in large section. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Section is minimal garbage collection unit of f2fs, in zoned block device, or ancient block mapping flash device, in order to improve GC efficiency, we can align GC unit to lower device erase unit, normally, it consists of multiple of segments. Once background or foreground GC triggers, it brings a large number of IOs, which will impact user IO, and also occupy cpu/memory resource intensively. So, to reduce impact of GC on large size section, this patch supports subsectional GC, in one cycle of GC, it only migrate partial segment{s} in victim section. Currently, by default, we use sbi->segs_per_sec as migration granularity. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Introduce a wrapper __is_large_section() to clean up codes. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
In F2FS_HAS_FEATURE(), we will use F2FS_SB(sb) to get sbi pointer to access .raw_super field, to avoid unneeded pointer conversion, this patch changes to F2FS_HAS_FEATURE() accept sbi parameter directly. Just do cleanup, no logic change. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlong Song 提交于
Signed-off-by: NYunlong Song <yunlong.song@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlong Song 提交于
When sbi->segs_per_sec > 1, and if some segno has 0 valid blocks before gc starts, do_garbage_collect will skip counting seg_freed++, and this will cause seg_freed < sbi->segs_per_sec and finally skip sec_freed++. Signed-off-by: NYunlong Song <yunlong.song@huawei.com> Signed-off-by: NChao Yu <yuchao0@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Previously, we only account preflush command for flush_merge mode, so for noflush_merge mode, we can not know in-flight preflush command count, fix it. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Yunlong Song 提交于
The encrypted file may be corrupted by GC in following case: Time 1: | segment 1 blkaddr = A | GC -> | segment 2 blkaddr = B | Encrypted block 1 is moved from blkaddr A of segment 1 to blkaddr B of segment 2, Time 2: | segment 1 blkaddr = B | GC -> | segment 3 blkaddr = C | Before page 1 is written back and if segment 2 become a victim, then page 1 is moved from blkaddr B of segment 2 to blkaddr Cof segment 3, during the GC process of Time 2, f2fs should wait for page 1 written back before reading it, or move_data_block will read a garbage block from blkaddr B since page is not written back to blkaddr B yet. Commit 6aa58d8a ("f2fs: readahead encrypted block during GC") introduce ra_data_block to read encrypted block, but it forgets to add f2fs_wait_on_page_writeback to avoid racing between GC and flush. Signed-off-by: NYunlong Song <yunlong.song@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 23 10月, 2018 11 次提交
-
-
由 Chao Yu 提交于
This patch does below changes to keep consistence of project quota data in sudden power-cut case: - update inode.i_projid and project quota atomically under lock_op() in f2fs_ioc_setproject() - recover inode.i_projid and project quota in recover_inode() Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
For journalled quota mode, let checkpoint to flush dquot dirty data and quota file data to guarntee persistence of all quota sysfile in last checkpoint, by this way, we can avoid corrupting quota sysfile when encountering SPO. The implementation is as below: 1. add a global state SBI_QUOTA_NEED_FLUSH to indicate that there is cached dquot metadata changes in quota subsystem, and later checkpoint should: a) flush dquot metadata into quota file. b) flush quota file to storage to keep file usage be consistent. 2. add a global state SBI_QUOTA_NEED_REPAIR to indicate that quota operation failed due to -EIO or -ENOSPC, so later, a) checkpoint will skip syncing dquot metadata. b) CP_QUOTA_NEED_FSCK_FLAG will be set in last cp pack to give a hint for fsck repairing. 3. add a global state SBI_QUOTA_SKIP_FLUSH, in checkpoint, if quota data updating is very heavy, it may cause hungtask in block_operation(). To avoid this, if our retry time exceed threshold, let's just skip flushing and retry in next checkpoint(). Signed-off-by: NWeichao Guo <guoweichao@huawei.com> Signed-off-by: NChao Yu <yuchao0@huawei.com> [Jaegeuk Kim: avoid warnings and set fsck flag] Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Sheng Yong 提交于
During recover, we will try to create new dentries for inodes with dentry_mark. But if the parent is missing (e.g. killed by fsck), recover will break. But those recovered dirty pages are not cleanup. This will hit f2fs_bug_on: [ 53.519566] F2FS-fs (loop0): Found nat_bits in checkpoint [ 53.539354] F2FS-fs (loop0): recover_inode: ino = 5, name = file, inline = 3 [ 53.539402] F2FS-fs (loop0): recover_dentry: ino = 5, name = file, dir = 0, err = -2 [ 53.545760] F2FS-fs (loop0): Cannot recover all fsync data errno=-2 [ 53.546105] F2FS-fs (loop0): access invalid blkaddr:4294967295 [ 53.546171] WARNING: CPU: 1 PID: 1798 at fs/f2fs/checkpoint.c:163 f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546174] Modules linked in: [ 53.546183] CPU: 1 PID: 1798 Comm: mount Not tainted 4.19.0-rc2+ #1 [ 53.546186] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 53.546191] RIP: 0010:f2fs_is_valid_blkaddr+0x26c/0x320 [ 53.546195] Code: 85 bb 00 00 00 48 89 df 88 44 24 07 e8 ad a8 db ff 48 8b 3b 44 89 e1 48 c7 c2 40 03 72 a9 48 c7 c6 e0 01 72 a9 e8 84 3c ff ff <0f> 0b 0f b6 44 24 07 e9 8a 00 00 00 48 8d bf 38 01 00 00 e8 7c a8 [ 53.546201] RSP: 0018:ffff88006c067768 EFLAGS: 00010282 [ 53.546208] RAX: 0000000000000000 RBX: ffff880068844200 RCX: ffffffffa83e1a33 [ 53.546211] RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff88006d51e590 [ 53.546215] RBP: 0000000000000005 R08: ffffed000daa3cb3 R09: ffffed000daa3cb3 [ 53.546218] R10: 0000000000000001 R11: ffffed000daa3cb2 R12: 00000000ffffffff [ 53.546221] R13: ffff88006a1f8000 R14: 0000000000000200 R15: 0000000000000009 [ 53.546226] FS: 00007fb2f3646840(0000) GS:ffff88006d500000(0000) knlGS:0000000000000000 [ 53.546229] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 53.546234] CR2: 00007f0fd77f0008 CR3: 00000000687e6002 CR4: 00000000000206e0 [ 53.546237] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 53.546240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 53.546242] Call Trace: [ 53.546248] f2fs_submit_page_bio+0x95/0x740 [ 53.546253] read_node_page+0x161/0x1e0 [ 53.546271] ? truncate_node+0x650/0x650 [ 53.546283] ? add_to_page_cache_lru+0x12c/0x170 [ 53.546288] ? pagecache_get_page+0x262/0x2d0 [ 53.546292] __get_node_page+0x200/0x660 [ 53.546302] f2fs_update_inode_page+0x4a/0x160 [ 53.546306] f2fs_write_inode+0x86/0xb0 [ 53.546317] __writeback_single_inode+0x49c/0x620 [ 53.546322] writeback_single_inode+0xe4/0x1e0 [ 53.546326] sync_inode_metadata+0x93/0xd0 [ 53.546330] ? sync_inode+0x10/0x10 [ 53.546342] ? do_raw_spin_unlock+0xed/0x100 [ 53.546347] f2fs_sync_inode_meta+0xe0/0x130 [ 53.546351] f2fs_fill_super+0x287d/0x2d10 [ 53.546367] ? vsnprintf+0x742/0x7a0 [ 53.546372] ? f2fs_commit_super+0x180/0x180 [ 53.546379] ? up_write+0x20/0x40 [ 53.546385] ? set_blocksize+0x5f/0x140 [ 53.546391] ? f2fs_commit_super+0x180/0x180 [ 53.546402] mount_bdev+0x181/0x200 [ 53.546406] mount_fs+0x94/0x180 [ 53.546411] vfs_kern_mount+0x6c/0x1e0 [ 53.546415] do_mount+0xe5e/0x1510 [ 53.546420] ? fs_reclaim_release+0x9/0x30 [ 53.546424] ? copy_mount_string+0x20/0x20 [ 53.546428] ? fs_reclaim_acquire+0xd/0x30 [ 53.546435] ? __might_sleep+0x2c/0xc0 [ 53.546440] ? ___might_sleep+0x53/0x170 [ 53.546453] ? __might_fault+0x4c/0x60 [ 53.546468] ? _copy_from_user+0x95/0xa0 [ 53.546474] ? memdup_user+0x39/0x60 [ 53.546478] ksys_mount+0x88/0xb0 [ 53.546482] __x64_sys_mount+0x5d/0x70 [ 53.546495] do_syscall_64+0x65/0x130 [ 53.546503] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 53.547639] ---[ end trace b804d1ea2fec893e ]--- So if recover fails, we need to drop all recovered data. Signed-off-by: NSheng Yong <shengyong1@huawei.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Sahitya Tummala 提交于
Direct IO can be used in case of hardware encryption. The following scenario results into data corruption issue in this path - Thread A - Thread B- -> write file#1 in direct IO -> GC gets kicked in -> GC submitted bio on meta mapping for file#1, but pending completion -> write file#1 again with new data in direct IO -> GC bio gets completed now -> GC writes old data to the new location and thus file#1 is corrupted. Fix this by submitting and waiting for pending io on meta mapping for direct IO case in f2fs_map_blocks(). Signed-off-by: NSahitya Tummala <stummala@codeaurora.org> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Testcase to reproduce this bug: 1. mkfs.f2fs /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr +a /mnt/f2fs/file 6. xfs_io -a /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. xfs_io /mnt/f2fs/file There is no error when opening this file w/o O_APPEND, but actually, we expect the correct result should be: /mnt/f2fs/file: Operation not permitted The root cause is, in recover_inode(), we recover inode->i_flags more than F2FS_I(inode)->i_flags, so fix it. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
This patch changes codes as below: - use f2fs_set_inode_flags() to update i_flags atomically to avoid potential race. - synchronize F2FS_I(inode)->i_flags to inode->i_flags in f2fs_new_inode(). - use f2fs_set_inode_flags() to simply codes in f2fs_quota_{on,off}. Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
We need to drop PG_checked flag on page as well when we clear PG_uptodate flag, in order to avoid treating the page as GCing one later. Signed-off-by: NWeichao Guo <guoweichao@huawei.com> Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This reverts commit 66110abc. If we clear the cold data flag out of the writeback flow, we can miscount -1 by end_io, which incurs a deadlock caused by all I/Os being blocked during heavy GC. Balancing F2FS Async: - IO (CP: 1, Data: -1, Flush: ( 0 0 1), Discard: ( ... GC thread: IRQ - move_data_page() - set_page_dirty() - clear_cold_data() - f2fs_write_end_io() - type = WB_DATA_TYPE(page); here, we get wrong type - dec_page_count(sbi, type); - f2fs_wait_on_page_writeback() Cc: <stable@vger.kernel.org> Reported-and-Tested-by: NPark Ju Hyung <qkrwngud825@gmail.com> Reviewed-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch adds issued read IO counts which is under block layer. Chao modified a bit, since: Below race can cause reversed reference on F2FS_RD_DATA, there is the same issue in f2fs_submit_page_bio(), fix them by relocate __submit_bio() and inc_page_count. Thread A Thread B - f2fs_write_begin - f2fs_submit_page_read - __submit_bio - f2fs_read_end_io - __read_end_io - dec_page_count(, F2FS_RD_DATA) - inc_page_count(, F2FS_RD_DATA) Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Now, we have supported cgroup writeback, it depends on correctly IO account of specified filesystem. But in commit d1b3e72d ("f2fs: submit bio of in-place-update pages"), we split write paths from f2fs_submit_page_mbio() to two: - f2fs_submit_page_bio() for IPU path - f2fs_submit_page_bio() for OPU path But still we account write IO only in f2fs_submit_page_mbio(), result in incorrect IO account, fix it by adding missing IO account in IPU path. Fixes: d1b3e72d ("f2fs: submit bio of in-place-update pages") Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
Below race can cause reversed reference on dirty count, fix it by relocating __submit_bio() and inc_page_count(). Thread A Thread B - f2fs_inplace_write_data - f2fs_submit_page_bio - __submit_bio - f2fs_write_end_io - dec_page_count - inc_page_count Cc: <stable@vger.kernel.org> Fixes: d1b3e72d ("f2fs: submit bio of in-place-update pages") Signed-off-by: NChao Yu <yuchao0@huawei.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-