- 25 2月, 2011 11 次提交
-
-
由 Miklos Szeredi 提交于
Commit e1181ee6 "vfs: pass struct file to do_truncate on O_TRUNC opens" broke the behavior of open(O_TRUNC|O_RDONLY) in fuse. Fuse assumed that when called from open, a truncate() will be done, not an ftruncate(). Fix by restoring the old behavior, based on the ATTR_OPEN flag. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
-
由 Miklos Szeredi 提交于
Single threaded NTFS-3G could get stuck if a delayed RELEASE reply triggered a DESTROY request via path_put(). Fix this by a) making RELEASE requests synchronous, whenever possible, on fuseblk filesystems b) if not possible (triggered by an asynchronous read/write) then do the path_put() in a separate thread with schedule_work(). Reported-by: NOliver Neukum <oneukum@suse.de> Cc: stable@kernel.org Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/i915: Fix unintended recursion in ironlake_disable_rc6 drm/i915: fix corruptions on i8xx due to relaxed fencing drm/i915: skip FDI & PCH enabling for DP_A agp/intel: Experiment with a 855GM GWB bit drm/i915: don't enable FDI & transcoder interrupts after all drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch
-
由 Dave Airlie 提交于
Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915: Fix unintended recursion in ironlake_disable_rc6
-
git://git.kernel.org/pub/scm/virt/kvm/kvm由 Linus Torvalds 提交于
* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Advance instruction pointer in dr_intercept
-
Signed-off-by: NHerton Ronaldo Krzesinski <herton.krzesinski@canonical.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Wilson 提交于
After disabling, we're meant to teardown the bo used for the contexts, not recurse into ourselves again and preventing module unload. Reported-and-tested-by: NBen Widawsky <bwidawsk@gmail.com> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
由 Tejun Heo 提交于
The new implementation of bd_link_disk_holder() added by 49731baa (block: restore multiple bd_link_disk_holder() support) didn't get an extra reference for the holder_dir kobject of the slave bdev; however, bdev kills holder_dir on removal, not release, so if the slave bdev is removed while there are holder links, the holder_dir will be destroyed while there still are holder links, which leads to oops later when bd_unlink_disk_order() tries to remove those links. Make bd_link_disk_holder() grab an extra reference for the slave's holder_dir and put it in bd_unlink_disk_holder(). Signed-off-by: NTejun Heo <tj@kernel.org> Reported-by: N"Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com> Tested-by: N"Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com> Cc: Neil Brown <neilb@suse.de> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
Grab a reference to bdev before calling blkdev_get(), which expects the refcount to be already incremented and either returns success or decrements the refcount and returns an error. The bug was introduced by e525fd89 (block: make blkdev_get/put() handle exclusive access), which didn't take into account this behavior of blkdev_get(). Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
Adam Kovari and others reported that disconnecting an USB drive with an ntfs-3g filesystem would cause "kernel BUG at fs/inode.c:1421!" to be triggered. The BUG could be traced back to ioctl(BLKBSZSET), which would erroneously decrement the refcount on the bdev. This is because blkdev_get() expects the refcount to be already incremented and either returns success or decrements the refcount and returns an error. The bug was introduced by e525fd89 (block: make blkdev_get/put() handle exclusive access), which didn't take into account this behavior of blkdev_get(). This fixes https://bugzilla.kernel.org/show_bug.cgi?id=29202 (and likely 29792 too) Reported-by: NAdam Kovari <kovariadam@gmail.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: Unlock vfsmount_lock in do_umount
-
- 24 2月, 2011 21 次提交
-
-
由 J. R. Okajima 提交于
By the commit b3e19d92 2011-01-07 fs: scale mntget/mntput vfsmount_lock was introduced around testing mnt_count. Fix the mis-typed 'unlock' Signed-off-by: NJ. R. Okajima <hooanon05@yahoo.co.jp> Acked-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Hugh Dickins 提交于
Robert Swiecki reported a BUG_ON(page_mapped) from a fuzzer, punching a hole with madvise(,, MADV_REMOVE). That path is under mutex, and cannot be explained by lack of serialization in unmap_mapping_range(). Reviewing the code, I found one place where vm_truncate_count handling should have been updated, when I switched at the last minute from one way of managing the restart_addr to another: mremap move changes the virtual addresses, so it ought to adjust the restart_addr. But rather than exporting the notion of restart_addr from memory.c, or converting to restart_pgoff throughout, simply reset vm_truncate_count to 0 to force a rescan if mremap move races with preempted truncation. We have no confirmation that this fixes Robert's BUG, but it is a fix that's worth making anyway. Signed-off-by: NHugh Dickins <hughd@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miklos Szeredi 提交于
Michael Leun reported that running parallel opens on a fuse filesystem can trigger a "kernel BUG at mm/truncate.c:475" Gurudas Pai reported the same bug on NFS. The reason is, unmap_mapping_range() is not prepared for more than one concurrent invocation per inode. For example: thread1: going through a big range, stops in the middle of a vma and stores the restart address in vm_truncate_count. thread2: comes in with a small (e.g. single page) unmap request on the same vma, somewhere before restart_address, finds that the vma was already unmapped up to the restart address and happily returns without doing anything. Another scenario would be two big unmap requests, both having to restart the unmapping and each one setting vm_truncate_count to its own value. This could go on forever without any of them being able to finish. Truncate and hole punching already serialize with i_mutex. Other callers of unmap_mapping_range() do not, and it's difficult to get i_mutex protection for all callers. In particular ->d_revalidate(), which calls invalidate_inode_pages2_range() in fuse, may be called with or without i_mutex. This patch adds a new mutex to 'struct address_space' to prevent running multiple concurrent unmap_mapping_range() on the same mapping. [ We'll hopefully get rid of all this with the upcoming mm preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex lockbreak" patch in particular. But that is for 2.6.39 ] Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> Reported-by: NMichael Leun <lkml20101129@newton.leun.net> Reported-by: NGurudas Pai <gurudas.pai@oracle.com> Tested-by: NGurudas Pai <gurudas.pai@oracle.com> Acked-by: NHugh Dickins <hughd@google.com> Cc: stable@kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
This reverts commit 556ea928. Jeff Chua reports that it can cause some bluetooth devices (he mentions an Bluetooth Intermec scanner) to just stop responding after a while with messages like [ 4533.361959] btusb 8-1:1.0: no reset_resume for driver btusb? [ 4533.361964] btusb 8-1:1.1: no reset_resume for driver btusb? from the kernel. See also https://bugzilla.kernel.org/show_bug.cgi?id=26182 for other reports. Reported-by: NJeff Chua <jeff.chua.linux@gmail.com> Reported-by: NAndrew Meakovski <meako@bigmir.net> Reported-by: NJim Faulkner <jfaulkne@ccs.neu.edu> Acked-by: NGreg KH <gregkh@suse.de> Acked-by: NMatthew Garrett <mjg@redhat.com> Acked-by: NGustavo F. Padovan <padovan@profusion.mobi> Cc: stable@kernel.org (for 2.6.37) Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dave Airlie 提交于
Merge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel into drm-fixes * 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel: drm/i915: fix corruptions on i8xx due to relaxed fencing drm/i915: skip FDI & PCH enabling for DP_A agp/intel: Experiment with a 855GM GWB bit drm/i915: don't enable FDI & transcoder interrupts after all drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch
-
由 Daniel Vetter 提交于
It looks like gen2 has a peculiar interleaved 2-row inter-tile layout. Probably inherited from i81x which had 2kb tiles (which naturally fit an even-number-of-tile-rows scheme to fit onto 4kb pages). There is no other mention of this in any docs (also not in the Intel internal documention according to Chris Wilson). Problem manifests itself in corruptions in the second half of the last tile row (if the bo has an odd number of tiles). Which can only happen with relaxed tiling (introduced in a00b10c3). So reject set_tiling calls that don't satisfy this constrain to prevent broken userspace from causing havoc. While at it, also check the size for newer chipsets. LKML: https://lkml.org/lkml/2011/2/19/5Reported-by: NIndan Zupancic <indan@nul.nu> Tested-by: NIndan Zupancic <indan@nul.nu> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits) Added support for usb ethernet (0x0fe6, 0x9700) r8169: fix RTL8168DP power off issue. r8169: correct settings of rtl8102e. r8169: fix incorrect args to oob notify. DM9000B: Fix PHY power for network down/up DM9000B: Fix reg_save after spin_lock in dm9000_timeout net_sched: long word align struct qdisc_skb_cb data sfc: lower stack usage in efx_ethtool_self_test bridge: Use IPv6 link-local address for multicast listener queries bridge: Fix MLD queries' ethernet source address bridge: Allow mcast snooping for transient link local addresses too ipv6: Add IPv6 multicast address flag defines bridge: Add missing ntohs()s for MLDv2 report parsing bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 report bridge: Fix IPv6 multicast snooping by storing correct protocol type p54pci: update receive dma buffers before and after processing fix cfg80211_wext_siwfreq lock ordering... rt2x00: Fix WPA TKIP Michael MIC failures. ath5k: Fix fast channel switching tcp: undo_retrans counter fixes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6由 Linus Torvalds 提交于
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: amd64-agp: fix crash at second module load drm/radeon: fix regression with AA resolve checking drm: drop commented out code and preceding comment drm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes. drm/vblank: Use memory barriers optimized for atomic_t instead of generics. drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns) drm/radeon/kms: align height of fb allocation. Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: serio/gameport - use 'long' system workqueue Input: synaptics - document 0x0c query Input: tegra-kbc - add function keymap
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: check if device support discard in xfs_ioc_trim() xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1
-
由 Shahar Havivi 提交于
The device is very similar to (0x0fe6, 0x8101), And works well with dm9601 driver. Signed-off-by: NShahar Havivi <shaharh@redhat.com> Acked-by: NPeter Korsgaard <jacmet@sunsite.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Hayes Wang 提交于
- fix the RTL8111DP turn off the power when DASH is enabled. - RTL_GIGA_MAC_VER_27 must wait for tx finish before reset. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Hayes Wang 提交于
Adjust and remove certain settings of RTL8102E which are for previous chips. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Acked-off-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Hayes Wang 提交于
It results in the wrong point address and influences RTL8168DP. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Acked-by: NFrancois Romieu <romieu@fr.zoreil.com>
-
由 Henry Nestler 提交于
DM9000 revision B needs 1 ms delay after PHY power-on. PHY must be powered on by writing 0 into register DM9000_GPR before all other settings will change (see Davicom spec and example code). Remember, that register DM9000_GPR was not changed by reset sequence. Without this fix the FIFO is out of sync and sends wrong data after sequence of "ifconfig ethX down ; ifconfig ethX up". Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Henry Nestler 提交于
The spin_lock should hold before reading register. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
netem_skb_cb() does : return (struct netem_skb_cb *)qdisc_skb_cb(skb)->data; Unfortunatly struct qdisc_skb_cb data is not long word aligned, so access to psched_time_t time_to_send uses a non aligned access. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dmitry Torokhov 提交于
Commit 8ee294cd converted serio subsystem event handling from using a dedicated thread to using common workqueue. Unfortunately, this regressed our boot times, due to the fact that serio jobs take long time to execute. While the new concurrency managed workqueue code manages long-playing works just fine and schedules additional workers as needed, such works wreck havoc among remaining users of flush_scheduled_work(). To solve this problem let's move serio/gameport works from system_wq to system_long_wq which nobody tries to flush. Reported-and-tested-by: NHernando Torque <pantherchen@versanet.de> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Dmitry Torokhov 提交于
Since Synaptics technical writers department is a bit slow releasing updated Synaptics interface guide, let's add some new bits (with their blessing) to the code so that they don't get lost. Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Jesper Nilsson 提交于
The __param section is already brought in by RODATA above. Signed-off-by: NJesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 2月, 2011 8 次提交
-
-
由 Florian Mickler 提交于
The module forgot to sometimes unregister some resources. This fixes Bug #22882. [Patch updated to 2.6.38-rc3 by Randy Dunlap.] Tested-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NFlorian Mickler <florian@mickler.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.fluff.org/bjdooks/linux由 Linus Torvalds 提交于
* 'for-2639-rc4/i2c-fixes' of git://git.fluff.org/bjdooks/linux: i2c-omap: fixup commit cb527ede whitespace i2c-omap: Double clear of ARDY status in IRQ handler i2c-omap: fix build for !CONFIG_SUSPEND i2c-omap: fix static suspend vs. runtime suspend i2c-stu300: make sure adapter-name is terminated
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6由 Linus Torvalds 提交于
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: Revert "USB: Reset USB 3.0 devices on (re)discovery" USB: musb: omap2430: fix kernel panic on reboot sierra: add new ID for Airprime/Sierra USB IP modem USB: serial/usb_wwan, fix tty NULL dereference USB: Reset USB 3.0 devices on (re)discovery USB: Add quirk for Samsung Android phone modem USB: Add Samsung SGH-I500/Android modem ID switch to visor driver USB: add quirks entry for Keytouch QWERTY Panel usb: musb: omap2430: fix kernel panic on reboot usb: musb: fix build breakage
-
由 Ben Dooks 提交于
Fixup the whitespace error noticed in cb527edeSigned-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Richard woodruff 提交于
This errata occurs when the ARDY interrupt generation is enabled. At the begining of every new transaction the ARDY interrupt is cleared. On continuous i2c transactions where after clearing the ARDY bit from I2C_STAT register (clearing the interrupt), the IRQ line is reasserted and the I2C_STAT[ARDY] bit set again on 1. In fact, the ARDY status bit is not cleared at the write access to I2C_STAT[ARDY] and only the IRQ line is deasserted and then reasserted. This is not captured in the usual errata documents. The workaround is to have a double clear of ARDY status in irq handler. Signed-off-by: NRichard woodruff <r-woodruff2@ti.com> Signed-off-by: NKeerthy <j-keerthy@ti.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Balaji T K 提交于
fix the build break when !CONFIG_SUSPEND drivers/i2c/busses/i2c-omap.c:1173: error: lvalue required as unary '&' operand make[3]: *** [drivers/i2c/busses/i2c-omap.o] Error 1 make[2]: *** [drivers/i2c/busses] Error 2 make[1]: *** [drivers/i2c] Error 2 make: *** [drivers] Error 2 Signed-off-by: NBalaji T K <balajitk@ti.com> Signed-off-by: NBen Dooks <ben-linux@fluff.org>
-
由 Dave Airlie 提交于
Some userspaces can emit a whole packet without disabling AA resolve by the looks of it, so we have to deal with them. Signed-off-by: NDave Airlie <airlied@redhat.com> Tested-by: NJorg Otte <jrg.otte@googlemail.com>
-
由 Paul Bolle 提交于
r100_gpu_init() was dropped in 90aca4d2 ("drm/radeon/kms: simplify & improve GPU reset V2") but here it was only commented out. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NDave Airlie <airlied@redhat.com>
-