- 25 7月, 2007 1 次提交
-
-
由 Jan-Bernd Themann 提交于
net_poll support for eHEA added Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 19 7月, 2007 1 次提交
-
-
由 Thomas Klein 提交于
The driver didn't allow an interface's MAC address to be modified if the respective interface wasn't setup - a failing Hcall was the result. Thus bonding wasn't usable. The fix moves the failing Hcall which was registering a MAC address for the reception of BC packets in firmware from the port up and down functions to the port resources setup functions. Additionally the missing update of the last_rx member of the netdev structure was added. Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 17 7月, 2007 1 次提交
-
-
由 Thomas Klein 提交于
This patch adds support for DLPAR memory add to the eHEA driver. To detect whether memory was added the driver uses its own memory mapping table and checks for kernel addresses whether they're located in already known memory sections. If not the function ehea_rereg_mrs() is triggered which performs a rebuild of the mapping table and a re-registration of the global memory region. Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 7月, 2007 1 次提交
-
-
由 Jan-Bernd Themann 提交于
This patch introduces a capability flag that is used by the DLPAR userspace tool to check which DLPAR features are supported by the eHEA driver. Missing goto has been included. Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 09 7月, 2007 1 次提交
-
-
由 Jan-Bernd Themann 提交于
This patch fixes several whitespace issues. Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 10 6月, 2007 1 次提交
-
-
由 Thomas Klein 提交于
This patch fixes a possible kernel panic due to not checking the vlan group when processing received VLAN packets and a malfunction in VLAN/hypervisor registration. Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 30 5月, 2007 1 次提交
-
-
由 Thomas Klein 提交于
Must access the respective queue's dummy netdev instead of the port's netdev. Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 28 4月, 2007 7 次提交
-
-
由 Thomas Klein 提交于
Certain resources may only be allocated when first logical port is available, and must be removed when last logical port has been removed. Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Thomas Klein 提交于
Create symbolic link from each logical port to ehea driver Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jan-Bernd Themann 提交于
This patch includes: - removal of unused fields in structs - ethtool statistics cleanup - removes unsed functionality from send path Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jan-Bernd Themann 提交于
This patch includes: - code cleanup related to resource management - extended error data gathering for resource management - removing trailing whitespaces Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jan-Bernd Themann 提交于
The patch fixes bugs related to the probe / remove adapter functionality (handling of OFDT nodes) Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jan-Bernd Themann 提交于
This patch provides a functionality that allows parallel RX processing on multiple RX queues by using dummy netdevices. Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Jan-Bernd Themann 提交于
This patch introduces functionality to dynamically add / remove ehea ports via an userspace DLPAR tool. It creates a subnode for each logical port in the sysfs. Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 10 2月, 2007 1 次提交
-
-
由 Jan-Bernd Themann 提交于
Error recovery for QP errors: Reset QPs and dump error information Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 30 1月, 2007 1 次提交
-
-
由 Thomas Klein 提交于
This patch fixes the wrong query and logging of the per interface jumbo frames enabled/disabled status. Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 23 1月, 2007 1 次提交
-
-
由 Thomas Klein 提交于
Not only check the pointer against 0 but also the dereferenced value Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 06 11月, 2006 1 次提交
-
-
由 Thomas Klein 提交于
Removed define H_CB_ALIGNMENT which is already defined in include/asm-powerpc/hvcall.h Signed-off-by: NThomas Klein <tklein@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 11 10月, 2006 1 次提交
-
-
由 Jan-Bernd Themann 提交于
This patch includes a bug fix for the port state notification and fixes the default queue sizes. Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 19 9月, 2006 1 次提交
-
-
由 Jan-Bernd Themann 提交于
Hi Jeff, sorry to bother you again. We figured out that the readq function we included in the eHEA patch we sent yesterday to access eHEA registers is defined as little endian on POWER. This collides with our adapter. We talked to some PPC people who told us there is a discussion going on about new access functions. We were told to use __raw_readq / __raw_writeq for now. This patch fixes this bug found by our internal tests today. Please apply this small patch on the latest patch we sent you yesterday. If it is easier for you I can also give you the entire eHEA patch again. sorry and thanks a lot, Jan-Bernd Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> drivers/net/ehea/ehea.h | 2 +- drivers/net/ehea/ehea_hw.h | 11 ++++++++--- 2 files changed, 9 insertions(+), 4 deletions(-) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 14 9月, 2006 1 次提交
-
-
由 Jan-Bernd Themann 提交于
Hi Jeff, I fixed the __iomem issue and tested the driver with sparse. Looks good so far. Thanks for your effort. Jan-Bernd Themann Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> drivers/net/Kconfig | 9 drivers/net/Makefile | 1 drivers/net/ehea/Makefile | 6 drivers/net/ehea/ehea.h | 447 ++++++ drivers/net/ehea/ehea_ethtool.c | 294 ++++ drivers/net/ehea/ehea_hcall.h | 51 drivers/net/ehea/ehea_hw.h | 287 ++++ drivers/net/ehea/ehea_main.c | 2654 ++++++++++++++++++++++++++++++++++++++++ drivers/net/ehea/ehea_phyp.c | 705 ++++++++++ drivers/net/ehea/ehea_phyp.h | 455 ++++++ drivers/net/ehea/ehea_qmr.c | 582 ++++++++ drivers/net/ehea/ehea_qmr.h | 358 +++++ 12 files changed, 5849 insertions(+) Signed-off-by: NJeff Garzik <jeff@garzik.org>
-