Convert the SAM9 and CAP9 board-specific files to make use of the
sam9_smc_configure() method to configure the memory-controller for
external peripherals.

The following boards have been modified:
 cam60 : NAND
 cap9adk : NAND, NOR
 qil-a9260 : NAND
 sam9-l9260 : NAND
 sam9260ek : NAND
 sam9261ek : DM9000 Ethernet, NAND
 sam9263 : NAND
 sam9g20ek : NAND
 sam9rlek : NAND
 usb-a9260 : NAND
 usb-a9263 .: NAND
Signed-off-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

In at91_add_device_nand(), do not configure the Static Memory
controller with specific timing values.
The *_devices.c files are board independent, and the SMC timing values
are specific to the NAND devices that are installed on the board.
The board-specific files are now responsible for configuring the
Static Memory controller (if the don't want to leave it up to a
bootloader).
Signed-off-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Add a structure 'sam9_smc_config' and function sam9_smc_configure() to
allow the board-specific files to specify the configuration of the
Static Memory Controller per chip-select.  This allows the board file
to specify timings for NAND flash, NOR flash or other external
peripherals.

This functionality can be used for all the SAM9 and CAP9 processors.
(the AT91RM9200 has a different memory-controller)
This patch is based on similar code in the AVR32 architecture.
Signed-off-by: NAndrew Victor <linux@maxim.org.za>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Update to use the asm/sections.h header rather than declaring these
symbols ourselves.  Change __data_start to _data to conform with the
naming found within asm/sections.h.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

lh7a40x only uses the clk API for the framebuffer, so there's
no point having a complicated implementation.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove commented out code, and unnecessary declarations.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

aaec2000 only uses the clk API for the framebuffer, so there's
no point having a complicated implementation.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

... to only return the framebuffer clock for the framebuffer device.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Both of these symbols should be defined by a platform, or neither
should be defined.  Ensure that all platforms conform.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

As Al did for Versatile in 2ad4f86b,
add a typesafe __io implementation for platforms to use.  Convert
platforms to use this new simple typesafe implementation.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Macro arguments should be parenthesized to avoid unexpected side
effects.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

PHYS_OFFSET constants should be defined using UL().
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

RiscPC is the only platform using the default setting for NR_IRQS,
so the default NR_IRQS doesn't really make sense; remove it and
make RiscPC provide such a definition.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

... and fix those drivers that were incorrectly relying upon
that include.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This avoids confusion with platform specific DMA implementations in
mach/dma.h
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When ISA_DMA_API is unset, we're not implementing the ISA DMA API,
so there's no point in publishing the prototypes via asm/dma.h, nor
including the machine dependent parts of that API.

This allows us to remove a lot of mach/dma.h files which don't contain
any useful code.  Unfortunately though, some platforms put their own
private non-ISA definitions into mach/dma.h, so we leave these behind
and fix the appropriate #include statments.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Since 8d5796d2, we have allowed
PAGE_OFFSET to be configurable, so a constant virtual address
for MAX_DMA_ADDRESS is buggy.  It should be defined in terms of
PAGE_OFFSET rather than a constant virtual address.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Move the definition of MAX_DMA_ADDRESS from mach/dma.h to mach/memory.h,
thereby placing it along side its relative, ISA_DMA_THRESHOLD.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

mach/io.h doesn't need linux/mm.h.
mach/dma.h doesn't need linux/device.h, asm/page.h or mach/hardware.h
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

ixp23xx's mach/io.h claims to need linux/kernel.h for BUG().
However, this header doesn't make use of BUG().
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h in mach/timex.h.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h in mach/io.h, mach/memory.h and mach/timex.h.  Include
this header file where necessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h in mach/io.h.  Include this header file where necessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h in mach/io.h.  Include this header file where necessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h in mach/io.h.  Include this header file where necessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h in mach/io.h.  Include this header file where necessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h in mach/io.h.  Include this header file where necessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h in mach/io.h.  Include this header file where necessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h in mach/io.h.  Include this header file where necessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h in mach/io.h.  Include this header file where necessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Avoid unnecessarily pollution of the kernel's namespace by avoiding
mach/hardware.h.  Include this header file where necessary.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Remove __arch_base_xxx() and __ioaddrc() macros; they're obsolete and
unused.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>