- 12 6月, 2015 2 次提交
-
-
由 Saeed Mahameed 提交于
Enable HW cacheline start padding and align RX WQE size to cacheline while considering HW start padding. Also, fix dma_unmap call to use the correct SKB data buffer size. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Previously we configured HW MTU to be netdev->mtu, actually we need to configure netdev->mtu + (ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN). Also, query MTU can not fail, hence make the relevant helper a void functionm, add mlx5e_set_dev_port_mtu, helper function to handle MTU setting. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 6月, 2015 2 次提交
-
-
由 Florian Fainelli 提交于
Define the pseudo-PHY address (30) which is used by all Broadcom Ethernet switches in a shared header file. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
We utilize inline functions from the PHY library, make sure that we do include phy.h in brcmphy.h in order for the code including brcmphy.h not to have to resolve this inclusion dependency. Fixes: 70531479 ("net: phy: broadcom: move shadow 0x1C register accessors to brcmphy.h") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 6月, 2015 1 次提交
-
-
由 Majd Dibbiny 提交于
Fix static checker warnings in the flow of system guid query. Fixes: 707c4602 ('net/mlx5_core: Add new query HCA vport commands') Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 6月, 2015 1 次提交
-
-
由 Alexei Starovoitov 提交于
allow programs read/write skb->mark, tc_index fields and ((struct qdisc_skb_cb *)cb)->data. mark and tc_index are generically useful in TC. cb[0]-cb[4] are primarily used to pass arguments from one program to another called via bpf_tail_call() which can be seen in sockex3_kern.c example. All fields of 'struct __sk_buff' are readable to socket and tc_cls_act progs. mark, tc_index are writeable from tc_cls_act only. cb[0]-cb[4] are writeable by both sockets and tc_cls_act. Add verifier tests and improve sample code. Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 6月, 2015 8 次提交
-
-
由 Majd Dibbiny 提交于
Add the following helpers: 1. mlx5_query_port_proto_oper -- queries the port speed port mask 2. mlx5_query_port_link_width_oper - queries the port link with bitmask 3. mlx5_query_port_vl_hw_cap - queries the Virtual Lanes supported on this port These helpers will be used from the IB driver when working in ISSI > 0 mode. Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Majd Dibbiny 提交于
Until now, mlx5_query_port_ptys always queried port number one. Added new argument in the function's prototype so we can also query the second port. This will be needed when thr helper will be invoked from the IB driver on non FPP (Function-Per-Port) devices. Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Majd Dibbiny 提交于
Extend the function prototypes for max and operational mtu to take the local port number. In the Ethernet driver is this hard coded to one, since ConnectX4 Ethernet devices are always function-per-port. The IB driver also serves older devices (ConnectIB) which isn't such, and hence the part can vary. Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Majd Dibbiny 提交于
Add two wrapper functions to the query adapter command: 1. mlx5_query_board_id -- replaces the old mlx5_cmd_query_adapter. 2. mlx5_core_query_vendor_id -- retrieves the vendor_id from the query_adapter command. Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Majd Dibbiny 提交于
Added the implementation for the following commands: 1. QUERY_HCA_VPORT_GID 2. QUERY_HCA_VPORT_PKEY 3. QUERY_HCA_VPORT_CONTEXT They will be needed when we move to work with ISSI > 0 in the IB driver too. Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Majd Dibbiny 提交于
Move the vport header file to be under include/linux/mlx5, such that the mlx5 IB can use it as well. Also add nic_ prefix to the vport NIC commands to differeniate between HCA vport commands and NIC vport commands. Signed-off-by: NMajd Dibbiny <majd@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haggai Abramonvsky 提交于
When working in ISSI > 0 mode, the model exposed by the device for XRCs and SRQs is different. XRCs use XRC SRQs and plain SRQs are based on RPM (Receive Memory Pool). Add helper functions to create, modify, query, and arm XRC SRQs and RMPs. Signed-off-by: NHaggai Abramovsky <hagaya@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
This patch changes flow hashing to use jhash2 over the flow_keys structure instead just doing jhash_3words over src, dst, and ports. This method will allow us take more input into the hashing function so that we can include full IPv6 addresses, VLAN, flow labels etc. without needing to resort to xor'ing which makes for a poor hash. Acked-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 6月, 2015 2 次提交
-
-
由 Toshiaki Makita 提交于
Currently packets with non-hardware-accelerated vlan cannot be handled by GRO. This causes low performance for 802.1ad and stacked vlan, as their vlan tags are currently not stripped by hardware. This patch adds GRO support for non-hardware-accelerated vlan and improves receive performance of them. Test Environment: vlan device (.1Q) on vlan device (.1ad) on ixgbe (82599) Result: - Before $ netperf -t TCP_STREAM -H 192.168.20.2 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.00 5233.17 Rx side CPU usage: %usr %sys %irq %soft %idle 0.27 58.03 0.00 41.70 0.00 - After $ netperf -t TCP_STREAM -H 192.168.20.2 -l 60 Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 60.00 7586.85 Rx side CPU usage: %usr %sys %irq %soft %idle 0.50 25.83 0.00 59.53 14.14 [ Register VLAN offloads with priority 10 -DaveM ] Signed-off-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
When we scan a packet for GRO processing, we want to see the most common packet types in the front of the offload_base list. So add a priority field so we can handle this properly. IPv4/IPv6 get the highest priority with the implicit zero priority field. Next comes ethernet with a priority of 10, and then we have the MPLS types with a priority of 15. Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Suggested-by: NToshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 6月, 2015 1 次提交
-
-
由 Daniel Borkmann 提交于
As this is already exported from tracing side via commit d9847d31 ("tracing: Allow BPF programs to call bpf_ktime_get_ns()"), we might as well want to move it to the core, so also networking users can make use of it, e.g. to measure diffs for certain flows from ingress/egress. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 5月, 2015 14 次提交
-
-
由 Alexei Starovoitov 提交于
Normally the program attachment place (like sockets, qdiscs) takes care of rcu protection and calls bpf_prog_put() after a grace period. The programs stored inside prog_array may not be attached anywhere, so prog_array needs to take care of preserving rcu protection. Otherwise bpf_tail_call() will race with bpf_prog_put(). To solve that introduce bpf_prog_put_rcu() helper function and use it in 3 places where unattached program can decrement refcnt: closing program fd, deleting/replacing program in prog_array. Fixes: 04fd61ab ("bpf: allow bpf programs to tail-call other bpf programs") Reported-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matan Barak 提交于
Previously, mlx4_en allocated EQs and used them exclusively. This affected RoCE performance, as applications which are events sensitive were limited to use only the legacy EQs. Change that by introducing an EQ pool. This pool is managed by mlx4_core. EQs are assigned to ports (when there are limited number of EQs, multiple ports could be assigned to the same EQs). An exception to this rule is the ASYNC EQ which handles various events. Legacy EQs are completely removed as all EQs could be shared. When a consumer (mlx4_ib/mlx4_en) requests an EQ, it asks for EQ serving on a specific port. The core driver calculates which EQ should be assigned to that request. Because IRQs are shared between IB and Ethernet modules, their names only include the PCI device BDF address. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NIdo Shamay <idos@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
This is the Ethernet part of the driver for the Mellanox ConnectX(R)-4 Single/Dual-Port Adapter supporting 100Gb/s with VPI. The driver extends the existing mlx5 driver with Ethernet functionality. This patch contains the driver entry points but does not include transmit and receive (see the previous patch in the series) routines. It also adds the option MLX5_CORE_EN to Kconfig to enable/disable the Ethernet functionality. Currently, Kconfig is programmed to make Ethernet and Infiniband functionality mutally exclusive. Also changed MLX5_INFINIBAND to be depandant on MLX5_CORE instead of selecting it, since MLX5_CORE could be selected without MLX5_INFINIBAND being selected. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
This patch contains the resource handling files: - flow_table.c: This file contains the code to handle the low level API to configure hardware flow table. It is separated from the flow_table_en.c, because it will be used in the future by Raw Ethernet QP in mlx5_ib too. - en_flow_table.[ch]: Ethernet flow steering handling. The flow table object contain a mapping between flow specs and TIRs. This mechanism will be used also to configure e-switch in the future, when SR-IOV support will be added. - transobj.[ch] - Low level functions to create/modify/destroy the transport objects: RQ/SQ/TIR/TIS - vport.[ch] - Handle attributes of a virtual port (vPort) in the embedded switch. Currently this switch is a passthrough, until SR-IOV support will be added. Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Introduce set/Query low level functions to access MTU in hardware. To be used by the netdev. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rana Shahout 提交于
Introduce mlx5_core_modify_cq_moderation() to be used by the netdev, to set hardware coalescing. Signed-off-by: NRana Shahout <ranas@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rana Shahout 提交于
Implemet get/set port status low level functions to be exposed by the netdev. Signed-off-by: NRana Shahout <ranas@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Those registers will be used by the ethtool to set/get settings. Signed-off-by: NRana Shahout <ranas@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
- Query all supported types of dev caps on driver load. - Store the Cap data outbox per cap type into driver private data. - Introduce new Macros to access/dump stored caps (using the auto generated data types). - Obsolete SW representation of dev caps (no need for SW copy for each cap). - Modify IB driver to use new macros for checking caps. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
mlx5_ifc.h was heavily modified here since it is now generated by a script from the device specification (PRM rev 0.25). This specification is backward compatible to existing hardware. Some structures/fields were added here in order to enable the Ethernet functionality of the driver. Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Preparation for upcoming ethernet driver. - Move msix array from eq_table struct to priv since its not related to eq_table - Intorduce irq_info struct to hold all irq information - Move name from mlx5_eq to irq_info struct since it is irq property. - Set IRQ affinity hints Signed-off-by: NAchiad Shochat <achiad@mellanox.com> Signed-off-by: NRana Shahout <ranas@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Amir Vadai 提交于
As David Daney pointed in mlx4_core driver [1], mlx5_core is also misusing the DMA-API. This patch is removing the code that vmap() memory allocated by dma_alloc_coherent(). After this patch, users of this drivers might fail allocating resources on memory fragmeneted systems. This will be fixed later on. [1] - https://patchwork.ozlabs.org/patch/458531/ CC: David Daney <david.daney@cavium.com> Signed-off-by: NAmir Vadai <amirv@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vivien Didelot 提交于
Fixes "vlaue" for "value" in include/linux/if_vlan.h. Signed-off-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mathieu Olivari 提交于
On stmmac driver, PHY specification in device-tree was done using the non-standard property "snps,phy-addr". Specifying a PHY on a different MDIO bus that the one within the stmmac controller doesn't seem to be possible when device-tree is used. This change adds support for the phy-handle property, as specified in Documentation/devicetree/bindings/net/ethernet.txt. Signed-off-by: NMathieu Olivari <mathieu@codeaurora.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 5月, 2015 2 次提交
-
-
由 Dave Chinner 提交于
XFS uses non-stanard batch sizes for avoiding frequent global counter updates on it's allocated inode counters, as they increment or decrement in batches of 64 inodes. Hence the standard percpu counter batch of 32 means that the counter is effectively a global counter. Currently Xfs uses a batch size of 128 so that it doesn't take the global lock on every single modification. However, Xfs also needs to compare accurately against zero, which means we need to use percpu_counter_compare(), and that has a hard-coded batch size of 32, and hence will spuriously fail to detect when it is supposed to use precise comparisons and hence the accounting goes wrong. Add __percpu_counter_compare() to take a custom batch size so we can use it sanely in XFS and factor percpu_counter_compare() to use it. Signed-off-by: NDave Chinner <dchinner@redhat.com> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NDave Chinner <david@fromorbit.com>
-
由 NeilBrown 提交于
bdi_unregister() now contains very little functionality. It contains a "WARN_ON" if bdi->dev is NULL. This warning is of no real consequence as bdi->dev isn't needed by anything else in the function, and it triggers if blk_cleanup_queue() -> bdi_destroy() is called before bdi_unregister, which happens since Commit: 6cd18e71 ("block: destroy bdi before blockdev is unregistered.") So this isn't wanted. It also calls bdi_set_min_ratio(). This needs to be called after writes through the bdi have all been flushed, and before the bdi is destroyed. Calling it early is better than calling it late as it frees up a global resource. Calling it immediately after bdi_wb_shutdown() in bdi_destroy() perfectly fits these requirements. So bdi_unregister() can be discarded with the important content moved to bdi_destroy(), as can the writeback_bdi_unregister event which is already not used. Reported-by: NMike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org (v4.0) Fixes: c4db59d3 ("fs: don't reassign dirty inodes to default_backing_dev_info") Fixes: 6cd18e71 ("block: destroy bdi before blockdev is unregistered.") Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Acked-by: NDan Williams <dan.j.williams@intel.com> Tested-by: NNicholas Moulin <nicholas.w.moulin@linux.intel.com> Signed-off-by: NNeilBrown <neilb@suse.de> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NJens Axboe <axboe@fb.com>
-
- 28 5月, 2015 2 次提交
-
-
由 Rusty Russell 提交于
da91309e (cpumask: Utility function to set n'th cpu...) created a genuinely weird function. I never saw it before, it went through DaveM. (He only does this to make us other maintainers feel better about our own mistakes.) cpumask_set_cpu_local_first's purpose is say "I need to spread things across N online cpus, choose the ones on this numa node first"; you call it in a loop. It can fail. One of the two callers ignores this, the other aborts and fails the device open. It can fail in two ways: allocating the off-stack cpumask, or through a convoluted codepath which AFAICT can only occur if cpu_online_mask changes. Which shouldn't happen, because if cpu_online_mask can change while you call this, it could return a now-offline cpu anyway. It contains a nonsensical test "!cpumask_of_node(numa_node)". This was drawn to my attention by Geert, who said this causes a warning on Sparc. It sets a single bit in a cpumask instead of returning a cpu number, because that's what the callers want. It could be made more efficient by passing the previous cpu rather than an index, but that would be more invasive to the callers. Fixes: da91309e Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (then rebased) Tested-by: NAmir Vadai <amirv@mellanox.com> Acked-by: NAmir Vadai <amirv@mellanox.com> Acked-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sunil Goutham 提交于
This vendor id will be used by network (vNIC), USB (xHCI), SATA (AHCI), GPIO, I2C, MMC and maybe other drivers for ThunderX SoC. Acked-by: NBjorn Helgaas <bhelgaas@google.com> Signed-off-by: NSunil Goutham <sgoutham@cavium.com> Signed-off-by: NAleksey Makarov <aleksey.makarov@caviumnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 5月, 2015 3 次提交
-
-
由 Peter Zijlstra 提交于
Commit 43b45780 ("perf/x86: Reduce stack usage of x86_schedule_events()") violated the rule that 'fake' scheduling; as used for event/group validation; should not change the event state. This went mostly un-noticed because repeated calls of x86_pmu::get_event_constraints() would give the same result. And x86_pmu::put_event_constraints() would mostly not do anything. Commit e979121b ("perf/x86/intel: Implement cross-HT corruption bug workaround") made the situation much worse by actually setting the event->hw.constraint value to NULL, so when validation and actual scheduling interact we get NULL ptr derefs. Fix it by removing the constraint pointer from the event and move it back to an array, this time in cpuc instead of on the stack. validate_group() x86_schedule_events() event->hw.constraint = c; # store <context switch> perf_task_event_sched_in() ... x86_schedule_events(); event->hw.constraint = c2; # store ... put_event_constraints(event); # assume failure to schedule intel_put_event_constraints() event->hw.constraint = NULL; <context switch end> c = event->hw.constraint; # read -> NULL if (!test_bit(hwc->idx, c->idxmsk)) # <- *BOOM* NULL deref This in particular is possible when the event in question is a cpu-wide event and group-leader, where the validate_group() tries to add an event to the group. Reported-by: NVince Weaver <vincent.weaver@maine.edu> Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrew Hunter <ahh@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Maria Dimakopoulou <maria.n.dimakopoulou@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 43b45780 ("perf/x86: Reduce stack usage of x86_schedule_events()") Fixes: e979121b ("perf/x86/intel: Implement cross-HT corruption bug workaround") Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Florian Fainelli 提交于
RGMII interfaces come in 4 different flavors that the PHY library needs to care about: regular RGMII (no delays), RGMII with either RX or TX delay, and both. In order to avoid errors of checking only for one type of RGMII interface and miss the 3 others, introduce a convenience function which tests for all values. Suggested-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sudeep Holla 提交于
Commit 5590f319 ("drivers/core/of: Add symlink to device-tree from devices with an OF node") adds the symlink `of_node` for each device pointing to it's device tree node while creating/initialising it. However the devicetree sysfs is created and setup in of_init which is executed at core_initcall level. For all the devices created before of_init, the following error is thrown: "Error -2(-ENOENT) creating of_node link" Like many other components in driver model, initialize the sysfs support for OF/devicetree from driver_init so that it's ready before any devices are created. Fixes: 5590f319 ("drivers/core/of: Add symlink to device-tree from devices with an OF node") Suggested-by: NRob Herring <robh+dt@kernel.org> Cc: Grant Likely <grant.likely@linaro.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NSudeep Holla <sudeep.holla@arm.com> Tested-by: NRobert Schwebel <r.schwebel@pengutronix.de> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 26 5月, 2015 1 次提交
-
-
由 Hauke Mehrtens 提交于
This makes it possible to save some lines of code in drivers with an simple bcma driver registration. Signed-off-by: NHauke Mehrtens <hauke@hauke-m.de> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
- 25 5月, 2015 1 次提交
-
-
由 Florian Fainelli 提交于
While adding support for 7425 PHY in the 7xxx PHY driver, the ID that was used was actually coming from an external PHY: a BCM5461x. Fix this by using the proper ID for the internal 7425 PHY and set the PHY_IS_INTERNAL flag, otherwise consumers of this PHY driver would not be able to properly identify it as such. Fixes: d068b02c ("net: phy: add BCM7425 and BCM7429 PHYs") Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Reviewed-by: NPetri Gynther <pgynther@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-