An assertion check was added to pipe_poll() to make sure that the ring
occupancy isn't seen to overflow the ring size.  However, since no locks
are held when the three values are read, it is possible for F_SETPIPE_SZ
to intervene and muck up the calculation, thereby causing the oops.

Fix this by simply removing the assertion and accepting that the
calculation might be approximate.

Note that the previous code also had a similar issue, though there was
no assertion check, since the occupancy counter and the ring size were
not read with a lock held, so it's possible that the poll check might
have malfunctioned then too.

Also wake up all the waiters so that they can reissue their checks if
there was a competing read or write.

Fixes: 8cefc107 ("pipe: Use head and tail pointers for the ring, not cursor and length")
Reported-by: syzbot+d37abaade33a934f16f2@syzkaller.appspotmail.com
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Increase the threshold at which the reader sends a wake event to the
writers in the queue such that the queue must be half empty before the wake
is issued rather than the wake being issued when just a single slot
available.

This reduces the number of context switches in the tests significantly,
without altering the amount of work achieved.  With my pipe-bench program,
there's a 20% reduction versus an unpatched kernel.
Suggested-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Make pipe_write() check to see if the ring has become full between it
taking the pipe mutex, checking the ring status and then taking the
spinlock.

This can happen if a notification is written into the pipe as that happens
without the pipe mutex.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Remove a redundant wakeup from pipe_write().
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Rearrange the sequence in pipe_write() so that the allocation of the new
buffer, the allocation of a ring slot and the attachment to the ring is
done under the pipe wait spinlock and then the lock is dropped and the
buffer can be filled.

The data copy needs to be done with the spinlock unheld and irqs enabled,
so the lock needs to be dropped first.  However, the reader can't progress
as we're holding pipe->mutex.

We also need to drop the lock as that would impact others looking at the
pipe waitqueue, such as poll(), the consumer and a future kernel message
writer.

We just abandon the preallocated slot if we get a copy error.  Future
writes may continue it and a future read will eventually recycle it.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Only do a wakeup in pipe_read() if we made space in a completely full
buffer.  The producer shouldn't be waiting on pipe->wait otherwise.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Advance the pipe ring tail pointer inside of wait spinlock in pipe_read()
so that the pipe can be written into with kernel notifications from
contexts where pipe->mutex cannot be taken.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Split pipe->ring_size into two numbers:

 (1) pipe->ring_size - indicates the hard size of the pipe ring.

 (2) pipe->max_usage - indicates the maximum number of pipe ring slots that
     userspace orchestrated events can fill.

This allows for a pipe that is both writable by the general kernel
notification facility and by userspace, allowing plenty of ring space for
notifications to be added whilst preventing userspace from being able to
pin too much unswappable kernel space.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Convert pipes to use head and tail pointers for the buffer ring rather than
pointer and length as the latter requires two atomic ops to update (or a
combined op) whereas the former only requires one.

 (1) The head pointer is the point at which production occurs and points to
     the slot in which the next buffer will be placed.  This is equivalent
     to pipe->curbuf + pipe->nrbufs.

     The head pointer belongs to the write-side.

 (2) The tail pointer is the point at which consumption occurs.  It points
     to the next slot to be consumed.  This is equivalent to pipe->curbuf.

     The tail pointer belongs to the read-side.

 (3) head and tail are allowed to run to UINT_MAX and wrap naturally.  They
     are only masked off when the array is being accessed, e.g.:

	pipe->bufs[head & mask]

     This means that it is not necessary to have a dead slot in the ring as
     head == tail isn't ambiguous.

 (4) The ring is empty if "head == tail".

     A helper, pipe_empty(), is provided for this.

 (5) The occupancy of the ring is "head - tail".

     A helper, pipe_occupancy(), is provided for this.

 (6) The number of free slots in the ring is "pipe->ring_size - occupancy".

     A helper, pipe_space_for_user() is provided to indicate how many slots
     userspace may use.

 (7) The ring is full if "head - tail >= pipe->ring_size".

     A helper, pipe_full(), is provided for this.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

Add a wakeup call for a case whereby the caller already has the waitqueue
spinlock held.  This can be used by pipes to alter the ring buffer indices
and issue a wakeup under the same spinlock.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>

Remove the nr_exclusive argument from __wake_up_sync_key() and derived
functions as everything seems to set it to 1.  Note also that if it wasn't
set to 1, it would clear WF_SYNC anyway.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>

Remove some #inclusions of linux/pipe_fs_i.h that don't seem to be
necessary any more.
Signed-off-by: NDavid Howells <dhowells@redhat.com>

In commit 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") we
changed elf to use MAP_FIXED_NOREPLACE instead of MAP_FIXED for the
executable mappings.

Then, people reported that it broke some binaries that had overlapping
segments from the same file, and commit ad55eac7 ("elf: enforce
MAP_FIXED on overlaying elf segments") re-instated MAP_FIXED for some
overlaying elf segment cases.  But only some - despite the summary line
of that commit, it only did it when it also does a temporary brk vma for
one obvious overlapping case.

Now Russell King reports another overlapping case with old 32-bit x86
binaries, which doesn't trigger that limited case.  End result: we had
better just drop MAP_FIXED_NOREPLACE entirely, and go back to MAP_FIXED.

Yes, it's a sign of old binaries generated with old tool-chains, but we
do pride ourselves on not breaking existing setups.

This still leaves MAP_FIXED_NOREPLACE in place for the load_elf_interp()
and the old load_elf_library() use-cases, because nobody has reported
breakage for those. Yet.

Note that in all the cases seen so far, the overlapping elf sections
seem to be just re-mapping of the same executable with different section
attributes.  We could possibly introduce a new MAP_FIXED_NOFILECHANGE
flag or similar, which acts like NOREPLACE, but allows just remapping
the same executable file using different protection flags.

It's not clear that would make a huge difference to anything, but if
people really hate that "elf remaps over previous maps" behavior, maybe
at least a more limited form of remapping would alleviate some concerns.

Alternatively, we should take a look at our elf_map() logic to see if we
end up not mapping things properly the first time.

In the meantime, this is the minimal "don't do that then" patch while
people hopefully think about it more.
Reported-by: NRussell King <linux@armlinux.org.uk>
Fixes: 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map")
Fixes: ad55eac7 ("elf: enforce  MAP_FIXED on overlaying elf segments")
Cc: Michal Hocko <mhocko@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull dma-mapping regression fix from Christoph Hellwig:
 "Revert an incorret hunk from a patch that caused problems on various
  arm boards (Andrey Smirnov)"

* tag 'dma-mapping-5.4-1' of git://git.infradead.org/users/hch/dma-mapping:
  dma-mapping: fix false positive warnings in dma_common_free_remap()

Pull ARM SoC fixes from Olof Johansson:
 "A few fixes this time around:

   - Fixup of some clock specifications for DRA7 (device-tree fix)

   - Removal of some dead/legacy CPU OPP/PM code for OMAP that throws
     warnings at boot

   - A few more minor fixups for OMAPs, most around display

   - Enable STM32 QSPI as =y since their rootfs sometimes comes from
     there

   - Switch CONFIG_REMOTEPROC to =y since it went from tristate to bool

   - Fix of thermal zone definition for ux500 (5.4 regression)"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: multi_v7_defconfig: Fix SPI_STM32_QSPI support
  ARM: dts: ux500: Fix up the CPU thermal zone
  arm64/ARM: configs: Change CONFIG_REMOTEPROC from m to y
  ARM: dts: am4372: Set memory bandwidth limit for DISPC
  ARM: OMAP2+: Fix warnings with broken omap2_set_init_voltage()
  ARM: OMAP2+: Add missing LCDC midlemode for am335x
  ARM: OMAP2+: Fix missing reset done flag for am3 and am43
  ARM: dts: Fix gpio0 flags for am335x-icev2
  ARM: omap2plus_defconfig: Enable more droid4 devices as loadable modules
  ARM: omap2plus_defconfig: Enable DRM_TI_TFP410
  DTS: ARM: gta04: introduce legacy spi-cs-high to make display work again
  ARM: dts: Fix wrong clocks for dra7 mcasp
  clk: ti: dra7: Fix mcasp8 clock bits

Merge tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - remove unneeded ar-option and KBUILD_ARFLAGS

 - remove long-deprecated SUBDIRS

 - fix modpost to suppress false-positive warnings for UML builds

 - fix namespace.pl to handle relative paths to ${objtree}, ${srctree}

 - make setlocalversion work for /bin/sh

 - make header archive reproducible

 - fix some Makefiles and documents

* tag 'kbuild-fixes-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kheaders: make headers archive reproducible
  kbuild: update compile-test header list for v5.4-rc2
  kbuild: two minor updates for Documentation/kbuild/modules.rst
  scripts/setlocalversion: clear local variable to make it work for sh
  namespace: fix namespace.pl script to support relative paths
  video/logo: do not generate unneeded logo C files
  video/logo: remove unneeded *.o pattern from clean-files
  integrity: remove pointless subdir-$(CONFIG_...)
  integrity: remove unneeded, broken attempt to add -fshort-wchar
  modpost: fix static EXPORT_SYMBOL warnings for UML build
  kbuild: correct formatting of header in kbuild module docs
  kbuild: remove SUBDIRS support
  kbuild: remove ar-option and KBUILD_ARFLAGS

Pull SCSI fixes from James Bottomley:
 "Twelve patches mostly small but obvious fixes or cosmetic but small
  updates"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Fix Nport ID display value
  scsi: qla2xxx: Fix N2N link up fail
  scsi: qla2xxx: Fix N2N link reset
  scsi: qla2xxx: Optimize NPIV tear down process
  scsi: qla2xxx: Fix stale mem access on driver unload
  scsi: qla2xxx: Fix unbound sleep in fcport delete path.
  scsi: qla2xxx: Silence fwdump template message
  scsi: hisi_sas: Make three functions static
  scsi: megaraid: disable device when probe failed after enabled device
  scsi: storvsc: setup 1:1 mapping between hardware queue and CPU queue
  scsi: qedf: Remove always false 'tmp_prio < 0' statement
  scsi: ufs: skip shutdown if hba is not powered
  scsi: bnx2fc: Handle scope bits when array returns BUSY or TSF

This makes getdents() and getdents64() do sanity checking on the
pathname that it gives to user space.  And to mitigate the performance
impact of that, it first cleans up the way it does the user copying, so
that the code avoids doing the SMAP/PAN updates between each part of the
dirent structure write.

I really wanted to do this during the merge window, but didn't have
time.  The conversion of filldir to unsafe_put_user() is something I've
had around for years now in a private branch, but the extra pathname
checking finally made me clean it up to the point where it is mergable.

It's worth noting that the filename validity checking really should be a
bit smarter: it would be much better to delay the error reporting until
the end of the readdir, so that non-corrupted filenames are still
returned.  But that involves bigger changes, so let's see if anybody
actually hits the corrupt directory entry case before worrying about it
further.

* branch 'readdir':
  Make filldir[64]() verify the directory entry filename is valid
  Convert filldir[64]() from __put_user() to unsafe_put_user()

This has been discussed several times, and now filesystem people are
talking about doing it individually at the filesystem layer, so head
that off at the pass and just do it in getdents{64}().

This is partially based on a patch by Jann Horn, but checks for NUL
bytes as well, and somewhat simplified.

There's also commentary about how it might be better if invalid names
due to filesystem corruption don't cause an immediate failure, but only
an error at the end of the readdir(), so that people can still see the
filenames that are ok.

There's also been discussion about just how much POSIX strictly speaking
requires this since it's about filesystem corruption.  It's really more
"protect user space from bad behavior" as pointed out by Jann.  But
since Eric Biederman looked up the POSIX wording, here it is for context:

 "From readdir:

   The readdir() function shall return a pointer to a structure
   representing the directory entry at the current position in the
   directory stream specified by the argument dirp, and position the
   directory stream at the next entry. It shall return a null pointer
   upon reaching the end of the directory stream. The structure dirent
   defined in the <dirent.h> header describes a directory entry.

  From definitions:

   3.129 Directory Entry (or Link)

   An object that associates a filename with a file. Several directory
   entries can associate names with the same file.

  ...

   3.169 Filename

   A name consisting of 1 to {NAME_MAX} bytes used to name a file. The
   characters composing the name may be selected from the set of all
   character values excluding the slash character and the null byte. The
   filenames dot and dot-dot have special meaning. A filename is
   sometimes referred to as a 'pathname component'."

Note that I didn't bother adding the checks to any legacy interfaces
that nobody uses.

Also note that if this ends up being noticeable as a performance
regression, we can fix that to do a much more optimized model that
checks for both NUL and '/' at the same time one word at a time.

We haven't really tended to optimize 'memchr()', and it only checks for
one pattern at a time anyway, and we really _should_ check for NUL too
(but see the comment about "soft errors" in the code about why it
currently only checks for '/')

See the CONFIG_DCACHE_WORD_ACCESS case of hash_name() for how the name
lookup code looks for pathname terminating characters in parallel.

Link: https://lore.kernel.org/lkml/20190118161440.220134-2-jannh@google.com/
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jann Horn <jannh@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We really should avoid the "__{get,put}_user()" functions entirely,
because they can easily be mis-used and the original intent of being
used for simple direct user accesses no longer holds in a post-SMAP/PAN
world.

Manually optimizing away the user access range check makes no sense any
more, when the range check is generally much cheaper than the "enable
user accesses" code that the __{get,put}_user() functions still need.

So instead of __put_user(), use the unsafe_put_user() interface with
user_access_{begin,end}() that really does generate better code these
days, and which is generally a nicer interface.  Under some loads, the
multiple user writes that filldir() does are actually quite noticeable.

This also makes the dirent name copy use unsafe_put_user() with a couple
of macros.  We do not want to make function calls with SMAP/PAN
disabled, and the code this generates is quite good when the
architecture uses "asm goto" for unsafe_put_user() like x86 does.

Note that this doesn't bother with the legacy cases.  Nobody should use
them anyway, so performance doesn't really matter there.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from David Miller:

 1) Fix ieeeu02154 atusb driver use-after-free, from Johan Hovold.

 2) Need to validate TCA_CBQ_WRROPT netlink attributes, from Eric
    Dumazet.

 3) txq null deref in mac80211, from Miaoqing Pan.

 4) ionic driver needs to select NET_DEVLINK, from Arnd Bergmann.

 5) Need to disable bh during nft_connlimit GC, from Pablo Neira Ayuso.

 6) Avoid division by zero in taprio scheduler, from Vladimir Oltean.

 7) Various xgmac fixes in stmmac driver from Jose Abreu.

 8) Avoid 64-bit division in mlx5 leading to link errors on 32-bit from
    Michal Kubecek.

 9) Fix bad VLAN check in rtl8366 DSA driver, from Linus Walleij.

10) Fix sleep while atomic in sja1105, from Vladimir Oltean.

11) Suspend/resume deadlock in stmmac, from Thierry Reding.

12) Various UDP GSO fixes from Josh Hunt.

13) Fix slab out of bounds access in tcp_zerocopy_receive(), from Eric
    Dumazet.

14) Fix OOPS in __ipv6_ifa_notify(), from David Ahern.

15) Memory leak in NFC's llcp_sock_bind, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
  selftests/net: add nettest to .gitignore
  net: qlogic: Fix memory leak in ql_alloc_large_buffers
  nfc: fix memory leak in llcp_sock_bind()
  sch_dsmark: fix potential NULL deref in dsmark_init()
  net: phy: at803x: use operating parameters from PHY-specific status
  net: phy: extract pause mode
  net: phy: extract link partner advertisement reading
  net: phy: fix write to mii-ctrl1000 register
  ipv6: Handle missing host route in __ipv6_ifa_notify
  net: phy: allow for reset line to be tied to a sleepy GPIO controller
  net: ipv4: avoid mixed n_redirects and rate_tokens usage
  r8152: Set macpassthru in reset_resume callback
  cxgb4:Fix out-of-bounds MSI-X info array access
  Revert "ipv6: Handle race in addrconf_dad_work"
  net: make sock_prot_memory_pressure() return "const char *"
  rxrpc: Fix rxrpc_recvmsg tracepoint
  qmi_wwan: add support for Cinterion CLS8 devices
  tcp: fix slab-out-of-bounds in tcp_zerocopy_receive()
  lib: textsearch: fix escapes in example code
  udp: only do GSO if # of segs > 1
  ...

Pull s390 fixes from Vasily Gorbik:

 - defconfig updates

 - Fix build errors with CC_OPTIMIZE_FOR_SIZE due to usage of "i"
   constraint for function arguments. Two kvm changes acked-by Christian
   Borntraeger.

 - Fix -Wunused-but-set-variable warnings in mm code.

 - Avoid a constant misuse in qdio.

 - Handle a case when cpumf is temporarily unavailable.

* tag 's390-5.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390: mark __insn32_query() as __always_inline
  KVM: s390: fix __insn32_query() inline assembly
  s390: update defconfigs
  s390/pci: mark function(s) __always_inline
  s390/mm: mark function(s) __always_inline
  s390/jump_label: mark function(s) __always_inline
  s390/cpu_mf: mark function(s) __always_inline
  s390/atomic,bitops: mark function(s) __always_inline
  s390/mm: fix -Wunused-but-set-variable warnings
  s390: mark __cpacf_query() as __always_inline
  s390/qdio: clarify size of the QIB parm area
  s390/cpumf: Fix indentation in sampling device driver
  s390/cpumsf: Check for CPU Measurement sampling
  s390/cpumf: Use consistant debug print format

__insn32_query() will not compile if the compiler decides to not
inline it, since it contains an inline assembly with an "i" constraint
with variable contents.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NVasily Gorbik <gor@linux.ibm.com>

The inline assembly constraints of __insn32_query() tell the compiler
that only the first byte of "query" is being written to. Intended was
probably that 32 bytes are written to.

Fix and simplify the code and just use a "memory" clobber.

Fixes: d6681397 ("KVM: s390: provide query function for instructions returning 32 byte")
Cc: stable@vger.kernel.org # v5.2+
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NVasily Gorbik <gor@linux.ibm.com>

Commit 5cf45379 ("dma-mapping: introduce a dma_common_find_pages
helper") changed invalid input check in dma_common_free_remap() from:

    if (!area || !area->flags != VM_DMA_COHERENT)

to

    if (!area || !area->flags != VM_DMA_COHERENT || !area->pages)

which seem to produce false positives for memory obtained via
dma_common_contiguous_remap()

This triggers the following warning message when doing "reboot" on ZII
VF610 Dev Board Rev B:

WARNING: CPU: 0 PID: 1 at kernel/dma/remap.c:112 dma_common_free_remap+0x88/0x8c
trying to free invalid coherent area: 9ef82980
Modules linked in:
CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.3.0-rc6-next-20190820 #119
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
Backtrace:
[<8010d1ec>] (dump_backtrace) from [<8010d588>] (show_stack+0x20/0x24)
 r7:8015ed78 r6:00000009 r5:00000000 r4:9f4d9b14
[<8010d568>] (show_stack) from [<8077e3f0>] (dump_stack+0x24/0x28)
[<8077e3cc>] (dump_stack) from [<801197a0>] (__warn.part.3+0xcc/0xe4)
[<801196d4>] (__warn.part.3) from [<80119830>] (warn_slowpath_fmt+0x78/0x94)
 r6:00000070 r5:808e540c r4:81c03048
[<801197bc>] (warn_slowpath_fmt) from [<8015ed78>] (dma_common_free_remap+0x88/0x8c)
 r3:9ef82980 r2:808e53e0
 r7:00001000 r6:a0b1e000 r5:a0b1e000 r4:00001000
[<8015ecf0>] (dma_common_free_remap) from [<8010fa9c>] (remap_allocator_free+0x60/0x68)
 r5:81c03048 r4:9f4d9b78
[<8010fa3c>] (remap_allocator_free) from [<801100d0>] (__arm_dma_free.constprop.3+0xf8/0x148)
 r5:81c03048 r4:9ef82900
[<8010ffd8>] (__arm_dma_free.constprop.3) from [<80110144>] (arm_dma_free+0x24/0x2c)
 r5:9f563410 r4:80110120
[<80110120>] (arm_dma_free) from [<8015d80c>] (dma_free_attrs+0xa0/0xdc)
[<8015d76c>] (dma_free_attrs) from [<8020f3e4>] (dma_pool_destroy+0xc0/0x154)
 r8:9efa8860 r7:808f02f0 r6:808f02d0 r5:9ef82880 r4:9ef82780
[<8020f324>] (dma_pool_destroy) from [<805525d0>] (ehci_mem_cleanup+0x6c/0x150)
 r7:9f563410 r6:9efa8810 r5:00000000 r4:9efd0148
[<80552564>] (ehci_mem_cleanup) from [<80558e0c>] (ehci_stop+0xac/0xc0)
 r5:9efd0148 r4:9efd0000
[<80558d60>] (ehci_stop) from [<8053c4bc>] (usb_remove_hcd+0xf4/0x1b0)
 r7:9f563410 r6:9efd0074 r5:81c03048 r4:9efd0000
[<8053c3c8>] (usb_remove_hcd) from [<8056361c>] (host_stop+0x48/0xb8)
 r7:9f563410 r6:9efd0000 r5:9f5f4040 r4:9f5f5040
[<805635d4>] (host_stop) from [<80563d0c>] (ci_hdrc_host_destroy+0x34/0x38)
 r7:9f563410 r6:9f5f5040 r5:9efa8800 r4:9f5f4040
[<80563cd8>] (ci_hdrc_host_destroy) from [<8055ef18>] (ci_hdrc_remove+0x50/0x10c)
[<8055eec8>] (ci_hdrc_remove) from [<804a2ed8>] (platform_drv_remove+0x34/0x4c)
 r7:9f563410 r6:81c4f99c r5:9efa8810 r4:9efa8810
[<804a2ea4>] (platform_drv_remove) from [<804a18a8>] (device_release_driver_internal+0xec/0x19c)
 r5:00000000 r4:9efa8810
[<804a17bc>] (device_release_driver_internal) from [<804a1978>] (device_release_driver+0x20/0x24)
 r7:9f563410 r6:81c41ed0 r5:9efa8810 r4:9f4a1dac
[<804a1958>] (device_release_driver) from [<804a01b8>] (bus_remove_device+0xdc/0x108)
[<804a00dc>] (bus_remove_device) from [<8049c204>] (device_del+0x150/0x36c)
 r7:9f563410 r6:81c03048 r5:9efa8854 r4:9efa8810
[<8049c0b4>] (device_del) from [<804a3368>] (platform_device_del.part.2+0x20/0x84)
 r10:9f563414 r9:809177e0 r8:81cb07dc r7:81c78320 r6:9f563454 r5:9efa8800
 r4:9efa8800
[<804a3348>] (platform_device_del.part.2) from [<804a3420>] (platform_device_unregister+0x28/0x34)
 r5:9f563400 r4:9efa8800
[<804a33f8>] (platform_device_unregister) from [<8055dce0>] (ci_hdrc_remove_device+0x1c/0x30)
 r5:9f563400 r4:00000001
[<8055dcc4>] (ci_hdrc_remove_device) from [<805652ac>] (ci_hdrc_imx_remove+0x38/0x118)
 r7:81c78320 r6:9f563454 r5:9f563410 r4:9f541010
[<8056538c>] (ci_hdrc_imx_shutdown) from [<804a2970>] (platform_drv_shutdown+0x2c/0x30)
[<804a2944>] (platform_drv_shutdown) from [<8049e4fc>] (device_shutdown+0x158/0x1f0)
[<8049e3a4>] (device_shutdown) from [<8013ac80>] (kernel_restart_prepare+0x44/0x48)
 r10:00000058 r9:9f4d8000 r8:fee1dead r7:379ce700 r6:81c0b280 r5:81c03048
 r4:00000000
[<8013ac3c>] (kernel_restart_prepare) from [<8013ad14>] (kernel_restart+0x1c/0x60)
[<8013acf8>] (kernel_restart) from [<8013af84>] (__do_sys_reboot+0xe0/0x1d8)
 r5:81c03048 r4:00000000
[<8013aea4>] (__do_sys_reboot) from [<8013b0ec>] (sys_reboot+0x18/0x1c)
 r8:80101204 r7:00000058 r6:00000000 r5:00000000 r4:00000000
[<8013b0d4>] (sys_reboot) from [<80101000>] (ret_fast_syscall+0x0/0x54)
Exception stack(0x9f4d9fa8 to 0x9f4d9ff0)
9fa0:                   00000000 00000000 fee1dead 28121969 01234567 379ce700
9fc0: 00000000 00000000 00000000 00000058 00000000 00000000 00000000 00016d04
9fe0: 00028e0c 7ec87c64 000135ec 76c1f410

Restore original invalid input check in dma_common_free_remap() to
avoid this problem.

Fixes: 5cf45379 ("dma-mapping: introduce a dma_common_find_pages helper")
Signed-off-by: NAndrey Smirnov <andrew.smirnov@gmail.com>
[hch: just revert the offending hunk instead of creating a new helper]
Signed-off-by: NChristoph Hellwig <hch@lst.de>

In commit 43d8ce9d ("Provide in-kernel headers to make
extending kernel easier") a new mechanism was introduced, for kernels
>=5.2, which embeds the kernel headers in the kernel image or a module
and exposes them in procfs for use by userland tools.

The archive containing the header files has nondeterminism caused by
header files metadata. This patch normalizes the metadata and utilizes
KBUILD_BUILD_TIMESTAMP if provided and otherwise falls back to the
default behaviour.

In commit f7b101d3 ("kheaders: Move from proc to sysfs") it was
modified to use sysfs and the script for generation of the archive was
renamed to what is being patched.
Signed-off-by: NDmitry Goldin <dgoldin+lkml@protonmail.ch>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: NJoel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Commit 6dc280eb ("coda: remove uapi/linux/coda_psdev.h") removed
a header in question. Some more build errors were fixed. Add more
headers into the test coverage.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Capitalize the first word in the sentence.

Use obj-m instead of obj-y. obj-y still works, but we have no built-in
objects in external module builds. So, obj-m is better IMHO.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Geert Uytterhoeven reports a strange side-effect of commit 858805b3
("kbuild: add $(BASH) to run scripts with bash-extension"), which
inserts the contents of a localversion file in the build directory twice.

[Steps to Reproduce]
  $ echo bar > localversion
  $ mkdir build
  $ cd build/
  $ echo foo > localversion
  $ make -s -f ../Makefile defconfig include/config/kernel.release
  $ cat include/config/kernel.release
  5.4.0-rc1foofoobar

This comes down to the behavior change of local variables.

The 'man sh' on my Ubuntu machine, where sh is an alias to dash,
explains as follows:
  When a variable is made local, it inherits the initial value and
  exported and readonly flags from the variable with the same name
  in the surrounding scope, if there is one. Otherwise, the variable
  is initially unset.

[Test Code]

  foo ()
  {
          local res
          echo "res: $res"
  }

  res=1
  foo

[Result]

  $ sh test.sh
  res: 1
  $ bash test.sh
  res:

So, scripts/setlocalversion correctly works only for bash in spite of
its hashbang being #!/bin/sh. Nobody had noticed it before because
CONFIG_SHELL was previously set to bash almost all the time.

Now that CONFIG_SHELL is set to sh, we must write portable and correct
code. I gave the Fixes tag to the commit that uncovered the issue.

Clear the variable 'res' in collect_files() to make it work for sh
(and it also works on distributions where sh is an alias to bash).

Fixes: 858805b3 ("kbuild: add $(BASH) to run scripts with bash-extension")
Reported-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: NGeert Uytterhoeven <geert+renesas@glider.be>

The namespace.pl script does not work properly if objtree is not set to
an absolute path. The do_nm function is run from within the find
function, which changes directories.

Because of this, appending objtree, $File::Find::dir, and $source, will
return a path which is not valid from the current directory.

This used to work when objtree was set to an absolute path when using
"make namespacecheck". It appears to have not worked when calling
./scripts/namespace.pl directly.

This behavior was changed in 7e1c0477 ("kbuild: Use relative path
for $(objtree)", 2014-05-14)

Rather than fixing the Makefile to set objtree to an absolute path, just
fix namespace.pl to work when srctree and objtree are relative. Also fix
the script to use an absolute path for these by default.

Use the File::Spec module for this purpose. It's been part of perl
5 since 5.005.

The curdir() function is used to get the current directory when the
objtree and srctree aren't set in the environment.

rel2abs() is used to convert possibly relative objtree and srctree
environment variables to absolute paths.

Finally, the catfile() function is used instead of string appending
paths together, since this is more robust when joining paths together.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Tested-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

Currently, all the logo C files are generated irrespective of the
CONFIG options. Adding them to extra-y is wrong. What we need to do
here is to add them to 'targets' so that if_changed works properly.

Files listed in 'targets' are cleaned, so clean-files is unneeded.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The pattern *.o is cleaned up globally by the top Makefile.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

The ima/ and evm/ sub-directories contain built-in objects, so
obj-$(CONFIG_...) is the correct way to descend into them.

subdir-$(CONFIG_...) is redundant.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

I guess commit 15ea0e1e ("efi: Import certificates from UEFI Secure
Boot") attempted to add -fshort-wchar for building load_uefi.o, but it
has never worked as intended.

load_uefi.o is created in the platform_certs/ sub-directory. If you
really want to add -fshort-wchar, the correct code is:

  $(obj)/platform_certs/load_uefi.o: KBUILD_CFLAGS += -fshort-wchar

But, you do not need to fix it.

Commit 8c97023c ("Kbuild: use -fshort-wchar globally") had already
added -fshort-wchar globally. This code was unneeded in the first place.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>

nettest is missing from gitignore.

Fixes: acda655f ("selftests: Add nettest")
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb.
This skb should be released if pci_dma_mapping_error fails.

Fixes: 0f8ab89e ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()")
Signed-off-by: NNavid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sysbot reported a memory leak after a bind() has failed.

While we are at it, abort the operation if kmemdup() has failed.

BUG: memory leak
unreferenced object 0xffff888105d83ec0 (size 32):
  comm "syz-executor067", pid 7207, jiffies 4294956228 (age 19.430s)
  hex dump (first 32 bytes):
    00 69 6c 65 20 72 65 61 64 00 6e 65 74 3a 5b 34  .ile read.net:[4
    30 32 36 35 33 33 30 39 37 5d 00 00 00 00 00 00  026533097]......
  backtrace:
    [<0000000036bac473>] kmemleak_alloc_recursive /./include/linux/kmemleak.h:43 [inline]
    [<0000000036bac473>] slab_post_alloc_hook /mm/slab.h:522 [inline]
    [<0000000036bac473>] slab_alloc /mm/slab.c:3319 [inline]
    [<0000000036bac473>] __do_kmalloc /mm/slab.c:3653 [inline]
    [<0000000036bac473>] __kmalloc_track_caller+0x169/0x2d0 /mm/slab.c:3670
    [<000000000cd39d07>] kmemdup+0x27/0x60 /mm/util.c:120
    [<000000008e57e5fc>] kmemdup /./include/linux/string.h:432 [inline]
    [<000000008e57e5fc>] llcp_sock_bind+0x1b3/0x230 /net/nfc/llcp_sock.c:107
    [<000000009cb0b5d3>] __sys_bind+0x11c/0x140 /net/socket.c:1647
    [<00000000492c3bbc>] __do_sys_bind /net/socket.c:1658 [inline]
    [<00000000492c3bbc>] __se_sys_bind /net/socket.c:1656 [inline]
    [<00000000492c3bbc>] __x64_sys_bind+0x1e/0x30 /net/socket.c:1656
    [<0000000008704b2a>] do_syscall_64+0x76/0x1a0 /arch/x86/entry/common.c:296
    [<000000009f4c57a4>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: 30cc4587 ("NFC: Move LLCP code to the NFC top level diirectory")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make sure TCA_DSMARK_INDICES was provided by the user.

syzbot reported :

kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8799 Comm: syz-executor235 Not tainted 5.3.0+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:nla_get_u16 include/net/netlink.h:1501 [inline]
RIP: 0010:dsmark_init net/sched/sch_dsmark.c:364 [inline]
RIP: 0010:dsmark_init+0x193/0x640 net/sched/sch_dsmark.c:339
Code: 85 db 58 0f 88 7d 03 00 00 e8 e9 1a ac fb 48 8b 9d 70 ff ff ff 48 b8 00 00 00 00 00 fc ff df 48 8d 7b 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 01 38 d0 7c 08 84 d2 0f 85 ca
RSP: 0018:ffff88809426f3b8 EFLAGS: 00010247
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff85c6eb09
RDX: 0000000000000000 RSI: ffffffff85c6eb17 RDI: 0000000000000004
RBP: ffff88809426f4b0 R08: ffff88808c4085c0 R09: ffffed1015d26159
R10: ffffed1015d26158 R11: ffff8880ae930ac7 R12: ffff8880a7e96940
R13: dffffc0000000000 R14: ffff88809426f8c0 R15: 0000000000000000
FS:  0000000001292880(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000080 CR3: 000000008ca1b000 CR4: 00000000001406e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 qdisc_create+0x4ee/0x1210 net/sched/sch_api.c:1237
 tc_modify_qdisc+0x524/0x1c50 net/sched/sch_api.c:1653
 rtnetlink_rcv_msg+0x463/0xb00 net/core/rtnetlink.c:5223
 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5241
 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
 netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
 netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
 sock_sendmsg_nosec net/socket.c:637 [inline]
 sock_sendmsg+0xd7/0x130 net/socket.c:657
 ___sys_sendmsg+0x803/0x920 net/socket.c:2311
 __sys_sendmsg+0x105/0x1d0 net/socket.c:2356
 __do_sys_sendmsg net/socket.c:2365 [inline]
 __se_sys_sendmsg net/socket.c:2363 [inline]
 __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2363
 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x440369

Fixes: 758cc43c ("[PKT_SCHED]: Fix dsmark to apply changes consistent")
Signed-off-by: NEric Dumazet <edumazet@google.com>
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>