- 15 7月, 2013 1 次提交
-
-
由 Rusty Russell 提交于
Sweep of the simple cases. Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 23 8月, 2012 1 次提交
-
-
由 Jean Sacren 提交于
Usually it's a good practice to use goto statement for error recovery when initializing the module. This approach could be an overkill if: 1) there is only one fail case; 2) success and failure use the same return statement. For a cleaner approach, remove the unnecessary goto statement and directly implement error recovery. Signed-off-by: NJean Sacren <sakiwit@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 14 8月, 2012 1 次提交
-
-
由 Wu Fengguang 提交于
This quiets the coccinelle warnings: net/bridge/netfilter/ebtable_filter.c:107:1-3: WARNING: PTR_RET can be used net/bridge/netfilter/ebtable_nat.c:107:1-3: WARNING: PTR_RET can be used net/ipv6/netfilter/ip6table_filter.c:65:1-3: WARNING: PTR_RET can be used net/ipv6/netfilter/ip6table_mangle.c:100:1-3: WARNING: PTR_RET can be used net/ipv6/netfilter/ip6table_raw.c:44:1-3: WARNING: PTR_RET can be used net/ipv6/netfilter/ip6table_security.c:62:1-3: WARNING: PTR_RET can be used net/ipv4/netfilter/iptable_filter.c:72:1-3: WARNING: PTR_RET can be used net/ipv4/netfilter/iptable_mangle.c:107:1-3: WARNING: PTR_RET can be used net/ipv4/netfilter/iptable_raw.c:51:1-3: WARNING: PTR_RET can be used net/ipv4/netfilter/iptable_security.c:70:1-3: WARNING: PTR_RET can be used Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 11 2月, 2010 3 次提交
-
-
由 Jan Engelhardt 提交于
The static initial tables are pretty large, and after the net namespace has been instantiated, they just hang around for nothing. This commit removes them and creates tables on-demand at runtime when needed. Size shrinks by 7735 bytes (x86_64). Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
由 Jan Engelhardt 提交于
The respective xt_table structures already have most of the metadata needed for hook setup. Add a 'priority' field to struct xt_table so that xt_hook_link() can be called with a reduced number of arguments. So should we be having more tables in the future, it comes at no static cost (only runtime, as before) - space saved: 6807373->6806555. Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
由 Jan Engelhardt 提交于
The calls to ip6t_do_table only show minimal differences, so it seems like a good cleanup to merge them to a single one too. Space saving obtained by both patches: 6807725->6807373 ("Total" column from `size -A`.) Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
- 10 2月, 2010 1 次提交
-
-
由 Jan Engelhardt 提交于
This patch combines all the per-hook functions in a given table into a single function. Together with the 2nd patch, further simplifications are possible up to the point of output code reduction. Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
- 18 1月, 2010 1 次提交
-
-
由 Alexey Dobriyan 提交于
Add ->net to match destructor list like ->net in constructor list. Make sure it's set in ebtables/iptables/ip6tables, this requires to propagate netns up to *_unregister_table(). Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
- 24 8月, 2009 1 次提交
-
-
由 Jan Engelhardt 提交于
The inputted table is never modified, so should be considered const. Signed-off-by: NJan Engelhardt <jengelh@medozas.de> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
- 10 8月, 2009 2 次提交
-
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@medozas.de>
-
- 18 2月, 2009 1 次提交
-
-
由 Stephen Hemminger 提交于
Later patches change the locking on xt_table and the initialization of the lock element is not needed since the lock is always initialized in xt_table_register anyway. Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
- 13 1月, 2009 1 次提交
-
-
由 Patrick McHardy 提交于
Don't spam logs for locally generated short packets. these can only be generated by root. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 10月, 2008 1 次提交
-
-
由 Alexey Dobriyan 提交于
Now that dev_net() exists, the usefullness of them is even less. Also they're a big problem in resolving circular header dependencies necessary for NOTRACK-in-netns patch. See below. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
- 14 4月, 2008 2 次提交
-
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
由 Alexey Dobriyan 提交于
Commit 9335f047 aka "[NETFILTER]: ip_tables: per-netns FILTER, MANGLE, RAW" added per-netns _view_ of iptables rules. They were shown to user, but ignored by filtering code. Now that it's possible to at least ping loopback, per-netns tables can affect filtering decisions. netns is taken in case of PRE_ROUTING, LOCAL_IN -- from in device, POST_ROUTING, LOCAL_OUT -- from out device, FORWARD -- from in device which should be equal to out device's netns. This code is relatively new, so BUG_ON was plugged. Wrappers were added to a) keep code the same from CONFIG_NET_NS=n users (overwhelming majority), b) consolidate code in one place -- similar changes will be done in ipv6 and arp netfilter code. Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Signed-off-by: NPatrick McHardy <kaber@trash.net>
-
- 01 2月, 2008 2 次提交
-
-
由 Alexey Dobriyan 提交于
Now, iptables show and configure different set of rules in different netnss'. Filtering decisions are still made by consulting only init_net's set. Changes are identical except naming so no splitting. P.S.: one need to remove init_net checks in nf_sockopt.c and inet_create() to see the effect. Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
Typical table module registers xt_table structure (i.e. packet_filter) and link it to list during it. We can't use one template for it because corresponding list_head will become corrupted. We also can't unregister with template because it wasn't changed at all and thus doesn't know in which list it is. So, we duplicate template at the very first step of table registration. Table modules will save it for use during unregistration time and actual filtering. Do it at once to not screw bisection. P.S.: renaming i.e. packet_filter => __packet_filter is temporary until full netnsization of table modules is done. Signed-off-by: NAlexey Dobriyan <adobriyan@sw.ru> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 1月, 2008 2 次提交
-
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
The IPv4 and IPv6 hook values are identical, yet some code tries to figure out the "correct" value by looking at the address family. Introduce NF_INET_* values for both IPv4 and IPv6. The old values are kept in a #ifndef __KERNEL__ section for userspace compatibility. Signed-off-by: NPatrick McHardy <kaber@trash.net> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2007 1 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 10月, 2007 1 次提交
-
-
由 Herbert Xu 提交于
With all the users of the double pointers removed, this patch mops up by finally replacing all occurances of sk_buff ** in the netfilter API by sk_buff *. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 5月, 2007 2 次提交
-
-
由 Patrick McHardy 提交于
iptables matches and targets expect packets to have at least a full IP header and a valid header length. Ignore packets sent through raw sockets for which this isn't true as in the other tables. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Patrick McHardy 提交于
- move arp_tables initial table structure definitions to arp_tables.h similar to ip_tables and ip6_tables - use C99 initializers - use initializer macros where possible Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2007 1 次提交
-
-
由 YOSHIFUJI Hideaki 提交于
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 2月, 2007 1 次提交
-
-
由 Jan Engelhardt 提交于
Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 9月, 2006 1 次提交
-
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 4月, 2006 1 次提交
-
-
由 Patrick McHardy 提交于
Clean up hook registration by makeing use of the new mass registration and unregistration helpers. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 3月, 2006 1 次提交
-
-
由 Andrew Morton 提交于
Every netfilter module uses `init' for its module_init() function and `fini' or `cleanup' for its module_exit() function. Problem is, this creates uninformative initcall_debug output and makes ctags rather useless. So go through and rename them all to $(filename)_init and $(filename)_fini. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 1月, 2006 1 次提交
-
-
由 Harald Welte 提交于
This monster-patch tries to do the best job for unifying the data structures and backend interfaces for the three evil clones ip_tables, ip6_tables and arp_tables. In an ideal world we would never have allowed this kind of copy+paste programming... but well, our world isn't (yet?) ideal. o introduce a new x_tables module o {ip,arp,ip6}_tables depend on this x_tables module o registration functions for tables, matches and targets are only wrappers around x_tables provided functions o all matches/targets that are used from ip_tables and ip6_tables are now implemented as xt_FOOBAR.c files and provide module aliases to ipt_FOOBAR and ip6t_FOOBAR o header files for xt_matches are in include/linux/netfilter/, include/linux/netfilter_{ipv4,ipv6} contains compatibility wrappers around the xt_FOOBAR.h headers Based on this patchset we're going to further unify the code, gradually getting rid of all the layer 3 specific assumptions. Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 5月, 2005 1 次提交
-
-
由 Patrick McHardy 提交于
Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-