While checking plane states for updates during atomic check, we create
dc_plane_states in preparation. These dc states should be freed if
something errors.

Although the input transfer function is also freed by
dc_plane_state_release(), we should free it (on error) under the same
scope as where it is created.
Signed-off-by: NLeo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

They were used by amdgpu_dm at some point but since it has its own
amdgpu_dm_connector now these aren't needed anymore.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Save/restore the backlight level scratch register in S3/S4 so the
backlight level comes back at the previously requested level.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199047
Fixes: 4ec6ecf4 (drm/amdgpu: drop scratch regs save and restore from S3/S4 handling)
Acked-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We unmapped imported DMA-bufs when the GEM handle was dropped, not when the
hardware was done with the buffere.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We unmapped imported DMA-bufs when the GEM handle was dropped, not when the
hardware was done with the buffere.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Drop the "kernel" and sg parameter and give the BO type to create
explicit to amdgpu_bo_create instead of figuring it out from the
parameters.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NRoger He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Just set the GTT domain as mandatory, so that the BO is validated into
it on first use. This allows us to setup the sg table later on.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NRoger He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of moving this to the SYSTEM domain just drop the backing store
and let the resulting allocation be freed.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NRoger He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Better to set this with all other fields as well.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NRoger He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Instead of calculating the size in bytes just to recalculate the number
of pages from it pass the BO directly to the function.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NRoger He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows us to gut a BO of it's backing store when the driver says that it
isn't needed any more.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NRoger He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

this patch actually refactor mailbox implmentations, and
all below changes are needed together to fix all those mailbox
handshake issues exposured by heavey TDR test.

1)refactor all mailbox functions based on byte accessing for mb_control
reason is to avoid touching non-related bits when writing trn/rcv part of
mailbox_control, this way some incorrect INTR sent to hypervisor
side could be avoided, and it fixes couple handshake bug.

2)trans_msg function re-impled: put a invalid
logic before transmitting message to make sure the ACK bit is in
a clear status, otherwise there is chance that ACK asserted already
before transmitting message and lead to fake ACK polling.
(hypervisor side have some tricks to workaround ACK bit being corrupted
by VF FLR which hase an side effects that may make guest side ACK bit
asserted wrongly), and clear TRANS_MSG words after message transferred.

3)for mailbox_flr_work, it is also re-worked: it takes the mutex lock
first if invoked, to block gpu recover's participate too early while
hypervisor side is doing VF FLR. (hypervisor sends FLR_NOTIFY to guest
before doing VF FLR and sentds FLR_COMPLETE after VF FLR done, and
the FLR_NOTIFY will trigger interrupt to guest which lead to
mailbox_flr_work being invoked)

This can avoid the issue that mailbox trans msg being cleared by its VF FLR.

4)for mailbox_rcv_irq IRQ routine, it should only peek msg and schedule
mailbox_flr_work, instead of ACK to hypervisor itself, because FLR_NOTIFY
msg sent from hypervisor side doesn't need VF's ACK (this is because
VF's ACK would lead to hypervisor clear its trans_valid/msg, and this
would cause handshake bug if trans_valid/msg is cleared not due to
correct VF ACK but from a wrong VF ACK like this "FLR_NOTIFY" one)

This fixed handshake bug that sometimes GUEST always couldn't receive
"READY_TO_ACCESS_GPU" msg from hypervisor.

5)seperate polling time limite accordingly:
POLL ACK cost no more than 500ms
POLL MSG cost no more than 12000ms
POLL FLR finish cost no more than 500ms

6) we still need to set adev into in_gpu_reset mode after we received
FLR_NOTIFY from host side, this can prevent innocent app wrongly succesed
to open amdgpu dri device.

FLR_NOFITY is received due to an IDLE hang detected from hypervisor side
which indicating GPU is already die in this VF.

v2:
use MACRO as the offset of mailbox_control register
don't test if NOTIFY_CMPL event in rcv_msg since it won't
recieve that message anymore
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NPixel Ding <Pixel.Ding@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

mailbox registers can be accessed with a byte boundry according
to BIF team, so this patch prepares register byte access
and will be used by following patches.

Actually, for mailbox registers once the byte field is touched even not changed,
the mailbox behaves, so we need the byte width accessing to those sort of regs.
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NPixel Ding <Pixel.Ding@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The vram type for dGPU is stored in umc_info while sys mem type
for APU is stored in integratedsysteminfo
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The commit d296278fd372003fc69588acfd0c0c5edbdf4874 added support for
detecting DDR4 but omitted the label that is printed out in
amdgpu_bo_init() resulting in a KASAN error.
Signed-off-by: NTom St Denis <tom.stdenis@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The amdgpu_ucode_fini_bo should be called after gfx_v8_0_hw_fini,
or it will have KCQ disable failed issue.

For Tonga, as it firstly finishes SMC block, and the SMC hw fini
will call amdgpu_ucode_fini, which will lead the amdgpu_ucode_fini_bo
called before gfx_v8_0_hw_fini, this is incorrect.
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The amdgpu_pm_sysfs_fini should call before amdgpu_device_ip_fini,
or the adev->pm.dpm_enabled would be set to 0, then the device files
related to pp won't be removed by amdgpu_pm_sysfs_fini when unload
driver.
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We don't need the page array for prime shared BOs, stop allocating it.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NRoger He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This allows drivers to only allocate dma addresses, but not a page
array.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NRoger He <Hongbo.He@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Let's stop mangling everything in a single header and create one header
per object instead.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NRoger He <Hongbo.He@amd.com>
Acked-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This was stopping me building on ARM after last pull.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Instead of using timer and spinlocks, use delayed_work and
mutexes for rockchip psr. This allows us to make blocking
calls when enabling/disabling psr (which is sort of important
given we're talking over dpcd to the display).

Cc: Caesar Wang <wxt@rock-chips.com>
Cc: 征增 王 <wzz@rock-chips.com>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NThierry Escande <thierry.escande@collabora.com>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180305222324.5872-3-enric.balletbo@collabora.com

There's a race between when bridge_disable and when vop_crtc_disable
are called. If the flush timer triggers a new psr work between these,
we will operate eDP without power shutdowned by bridge_disable. In this
case, moving activate/deactivate to enable/disable bridge to avoid it.

Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Nzain wang <wzz@rock-chips.com>
Signed-off-by: NCaesar Wang <wxt@rock-chips.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NThierry Escande <thierry.escande@collabora.com>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180305222324.5872-2-enric.balletbo@collabora.com

The HDMI vpll clock should be enabled when bind() is called. So move the
clk_prepare_enable of that clock to bind() function and add the missing
clk_disable_unprepare() required in error handling path and unbind().

Fixes: 12b9f204 ("drm: bridge/dw_hdmi: add rockchip rk3288 support")
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NThierry Escande <thierry.escande@collabora.com>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302175757.28192-5-enric.balletbo@collabora.com

In bind the clk_prepare_enable of the HDMI pclk is called before adding the
i2c_adapter. So it should be the other way around in unbind, first remove
the i2c_adapter and then call the clk_disable_unprepare.

Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support")
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NThierry Escande <thierry.escande@collabora.com>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302175757.28192-4-enric.balletbo@collabora.com

Add missing error handling in bind().

Fixes: 412d4ae6 ("drm/rockchip: hdmi: add Innosilicon HDMI support")
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NThierry Escande <thierry.escande@collabora.com>
[moved clk_disable_unprepare reordering in unbind to separate patch]
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302175757.28192-3-enric.balletbo@collabora.com

In bind()'s error handling path call destroy functions instead of
cleanup functions for encoder and connector and reorder to match how is
called in bind().

In unbind() call the connector and encoder destroy functions.
Signed-off-by: NJeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: NThierry Escande <thierry.escande@collabora.com>
Signed-off-by: NEnric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20180302175757.28192-2-enric.balletbo@collabora.com

Replace the ad-hoc iturbt_709 property with the new standard
COLOR_ENCODING property. Compiles, but not tested.

v2: Fix typos (Ilia)

Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: nouveau@lists.freedesktop.org
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180220134816.15229-1-ville.syrjala@linux.intel.comReviewed-by: NIlia Mirkin <imirkin@alum.mit.edu>
Acked-by: Ben Skeggs <bskeggs@redhat.com> #irc

Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

There is one corner case missing schedule out notification of the preempted
request. The preempted request is just completed when preemption happen,
then it will be canceled and won't be resubmitted later, GVT-g will lost
the schedule out notification.

Here add schedule out notification if found the preempted request has been
completed.

v2:
- refine description, add completed check and notification in
  execlists_cancel_port_requests. (Chris)

v3:
- use ternary confitional, remove local variable. (Tvrtko)

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NWeinan Li <weinan.z.li@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1520302557-25079-1-git-send-email-weinan.z.li@intel.com

With the introduction of asymmetric slices in CNL, we cannot rely on
the previous SUBSLICE_MASK getparam to tell userspace what subslices
are available. Here we introduce a more detailed way of querying the
Gen's GPU topology that doesn't aggregate numbers.

This is essential for monitoring parts of the GPU with the OA unit,
because counters need to be normalized to the number of
EUs/subslices/slices. The current aggregated numbers like EU_TOTAL do
not gives us sufficient information.

The Mesa series making use of this API is :

    https://patchwork.freedesktop.org/series/38795/

As a bonus we can draw representations of the GPU :

    https://imgur.com/a/vuqpa

v2: Rename uapi struct s/_mask/_info/ (Tvrtko)
    Report max_slice/subslice/eus_per_subslice rather than strides (Tvrtko)
    Add uapi macros to read data from *_info structs (Tvrtko)

v3: Use !!(v & DRM_I915_BIT()) for uapi macros instead of custom shifts (Tvrtko)

v4: factorize query item writting (Tvrtko)
    tweak uapi struct/define names (Tvrtko)

v5: Replace ALIGN() macro (Chris)

v6: Updated uapi comments (Tvrtko)
    Moved flags != 0 checks into vfuncs (Tvrtko)

v7: Use access_ok() before copying anything, to avoid overflows (Chris)
    Switch BUG_ON() to GEM_WARN_ON() (Tvrtko)

v8: Tweak uapi comments style to match the coding style (Lionel)

v9: Fix error in comment about computation of enabled subslice (Tvrtko)

v10: Fix/update comments in uAPI (Sagar)

v11: Drop drm_i915_query_(slice|subslice|eu)_info in favor of a single
     drm_i915_query_topology_info (Joonas)

v12: Add subslice_stride/eu_stride in drm_i915_query_topology_info (Joonas)

v13: Fix comment in uAPI (Joonas)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306122857.27317-7-lionel.g.landwerlin@intel.com

There are a number of information that are readable from hardware
registers and that we would like to make accessible to userspace. One
particular example is the topology of the execution units (how are
execution units grouped in subslices and slices and also which ones
have been fused off for die recovery).

At the moment the GET_PARAM ioctl covers some basic needs, but
generally is only able to return a single value for each defined
parameter. This is a bit problematic with topology descriptions which
are array/maps of available units.

This change introduces a new ioctl that can deal with requests to fill
structures of potentially variable lengths. The user is expected fill
a query with length fields set at 0 on the first call, the kernel then
sets the length fields to the their expected values. A second call to
the kernel with length fields at their expected values will trigger a
copy of the data to the pointed memory locations.

The scope of this uAPI is only to provide information to userspace,
not to allow configuration of the device.

v2: Simplify dispatcher code iteration (Tvrtko)
    Tweak uapi drm_i915_query_item structure (Tvrtko)

v3: Rename pad fields into flags (Chris)
    Return error on flags field != 0 (Chris)
    Only copy length back to userspace in drm_i915_query_item (Chris)

v4: Use array of functions instead of switch (Chris)

v5: More comments in uapi (Tvrtko)
    Return query item errors in length field (All)

v6: Tweak uapi comments style to match the coding style (Lionel)

v7: Add i915_query.h (Joonas)

v8: (Lionel) Change the behavior of the item iterator to report
    invalid queries into the query item rather than stopping the
    iteration. This enables userspace applications to query newer
    items on older kernels and only have failure on the items that are
    not supported.

v9: Edit copyright headers (Joonas)

v10: Typos & comments in uapi (Joonas)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306122857.27317-6-lionel.g.landwerlin@intel.com

This might be useful information for developers looking at an error
state.

v2: Place topology towards the end of the error state (Chris)

v3: Reuse common printing code (Michal)

v4: Make this a one-liner (Chris)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306122857.27317-5-lionel.g.landwerlin@intel.com

While the end goal is to make this information available to userspace
through a new ioctl, there is no reason we can't display it in a human
readable fashion through debugfs.

slice0: 3 subslice(s) (0x7):
	subslice0: 8 EUs (0xff)
	subslice1: 8 EUs (0xff)
	subslice2: 8 EUs (0xff)
	subslice3: 0 EUs (0x0)
slice1: 3 subslice(s) (0x7):
	subslice0: 8 EUs (0xff)
	subslice1: 8 EUs (0xff)
	subslice2: 8 EUs (0xff)
	subslice3: 0 EUs (0x0)
slice2: 3 subslice(s) (0x7):
	subslice0: 8 EUs (0xff)
	subslice1: 8 EUs (0xff)
	subslice2: 8 EUs (0xff)
	subslice3: 0 EUs (0x0)

v2: Reformat debugfs printing (Tvrtko)
    Use the new EU mask helper (Tvrtko)

v3: Move printing code to intel_device_info.c to be shared with error
    state (Michal)

v4: Bump u8 to u16 when using sseu_get_eus() (Lionel)
Suggested-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306122857.27317-4-lionel.g.landwerlin@intel.com

Now that we have that information in topology fields, let's just reuse it.

v2: Style tweaks (Tvrtko)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306122857.27317-3-lionel.g.landwerlin@intel.com

Up to now, subslice mask was assumed to be uniform across slices. But
starting with Cannonlake, slices can be asymmetric (for example slice0
has different number of subslices as slice1+). This change stores all
subslices masks for all slices rather than having a single mask that
applies to all slices.

v2: Rework how we store total numbers in sseu_dev_info (Tvrtko)
    Fix CHV eu masks, was reading disabled as enabled (Tvrtko)
    Readability changes (Tvrtko)
    Add EU index helper (Tvrtko)

v3: Turn ALIGN(v, 8) / 8 into DIV_ROUND_UP(v, BITS_PER_BYTE) (Tvrtko)
    Reuse sseu_eu_idx() for setting eu_mask on CHV (Tvrtko)
    Reformat debug prints for subslices (Tvrtko)

v4: Change eu_mask helper into sseu_set_eus() (Tvrtko)

v5: With Haswell reporting masks & counts, bump sseu_*_eus() functions
    to use u16 (Lionel)

v6: Fix sseu_get_eus() for > 8 EUs per subslice (Lionel)

v7: Change debugfs enabels for number of subslices per slice, will
    need a small igt/pm_sseu change (Lionel)
    Drop subslice_total field from sseu_dev_info, rely on
    sseu_subslice_total() to recompute the value instead (Lionel)

v8: Remove unused function compute_subslice_total() (Lionel)
Signed-off-by: NLionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306122857.27317-2-lionel.g.landwerlin@intel.com

gcc-4.4.4 has problems with initalizers of anon unions.

drivers/gpu/drm/i915/intel_guc_log.c: In function 'guc_log_control':
drivers/gpu/drm/i915/intel_guc_log.c:64: error: unknown field 'logging_enabled' specified in initializer

Work around this.

Fixes: 35fe703c ("drm/i915/guc: Change values for i915_guc_log_control")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180308001333.rI2vrNRTY%akpm@linux-foundation.org

"Clock gating bug in GWL may not clear barrier state when an EOT
is received, causing a hang the next time that barrier is used."

HSDES: 2201832410

Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NRafael Antognolli <rafael.antognolli@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307220912.3681-1-rodrigo.vivi@intel.com

We were previously selecting 1024x768 and 32BPP as the default
set-up for the PL111 consumers.

This does not work on elder systems: the device tree bindings
support a property "max-memory-bandwidth" in bytes/second that
states that if you exceed this the memory bus will saturate.
The result is flickering and unstable images.

Parse the "max-memory-bandwidth" and respect it when
intializing the driver. On the RealView PB11MP, Versatile and
Integrator/CP we get a nice console as default with this code.
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180307215819.15814-1-linus.walleij@linaro.org

The following happens when connection a DVI output driven
from the SiI9022 using a DVI-to-VGA adapter plug:

i2c i2c-0: sendbytes: NAK bailout.
i2c i2c-0: sendbytes: NAK bailout.

Then no picture. Apparently the I2C engine inside the SiI9022
is not smart enough to try to fall back to DDC I2C. Or the
vendor have not integrated the electronics properly. I don't
know which one it is.

After this, the I2C bus seems stalled and the first attempt to
read the status register fails, and the code returns with
negative return value, and the display fails to initialized.

Instead, retry status readout five times and continue even
if this fails.

Tested on the ARM Versatile Express with a DVI-to-VGA
connector, it now gives picture.

Introduce a helper struct device *dev variable to make
the code more readable.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180305101702.13441-1-linus.walleij@linaro.org