1. 07 11月, 2014 1 次提交
  2. 05 11月, 2014 3 次提交
  3. 04 11月, 2014 15 次提交
  4. 08 10月, 2014 1 次提交
    • J
      f2fs: support volatile operations for transient data · 02a1335f
      Jaegeuk Kim 提交于
      This patch adds support for volatile writes which keep data pages in memory
      until f2fs_evict_inode is called by iput.
      
      For instance, we can use this feature for the sqlite database as follows.
      While supporting atomic writes for main database file, we can keep its journal
      data temporarily in the page cache by the following sequence.
      
      1. open
       -> ioctl(F2FS_IOC_START_VOLATILE_WRITE);
      2. writes
       : keep all the data in the page cache.
      3. flush to the database file with atomic writes
        a. ioctl(F2FS_IOC_START_ATOMIC_WRITE);
        b. writes
        c. ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
      4. close
       -> drop the cached data
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      02a1335f
  5. 07 10月, 2014 1 次提交
    • J
      f2fs: support atomic writes · 88b88a66
      Jaegeuk Kim 提交于
      This patch introduces a very limited functionality for atomic write support.
      In order to support atomic write, this patch adds two ioctls:
       o F2FS_IOC_START_ATOMIC_WRITE
       o F2FS_IOC_COMMIT_ATOMIC_WRITE
      
      The database engine should be aware of the following sequence.
      1. open
       -> ioctl(F2FS_IOC_START_ATOMIC_WRITE);
      2. writes
        : all the written data will be treated as atomic pages.
      3. commit
       -> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE);
        : this flushes all the data blocks to the disk, which will be shown all or
        nothing by f2fs recovery procedure.
      4. repeat to #2.
      
      The IO pattens should be:
      
        ,- START_ATOMIC_WRITE                  ,- COMMIT_ATOMIC_WRITE
       CP | D D D D D D | FSYNC | D D D D | FSYNC ...
                            `- COMMIT_ATOMIC_WRITE
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      88b88a66
  6. 01 10月, 2014 4 次提交
  7. 24 9月, 2014 3 次提交
    • J
      f2fs: remove redundant operation during roll-forward recovery · c52e1b10
      Jaegeuk Kim 提交于
      If same data is updated multiple times, we don't need to redo whole the
      operations.
      Let's just update the lastest one.
      Reviewed-by: NChao Yu <chao2.yu@samsung.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      c52e1b10
    • J
      f2fs: fix conditions to remain recovery information in f2fs_sync_file · 88bd02c9
      Jaegeuk Kim 提交于
      This patch revisited whole the recovery information during the f2fs_sync_file.
      
      In this patch, there are three information to make a decision.
      
      a) IS_CHECKPOINTED,	/* is it checkpointed before? */
      b) HAS_FSYNCED_INODE,	/* is the inode fsynced before? */
      c) HAS_LAST_FSYNC,	/* has the latest node fsync mark? */
      
      And, the scenarios for our rule are based on:
      
      [Term] F: fsync_mark, D: dentry_mark
      
      1. inode(x) | CP | inode(x) | dnode(F)
      2. inode(x) | CP | inode(F) | dnode(F)
      3. inode(x) | CP | dnode(F) | inode(x) | inode(F)
      4. inode(x) | CP | dnode(F) | inode(F)
      5. CP | inode(x) | dnode(F) | inode(DF)
      6. CP | inode(DF) | dnode(F)
      7. CP | dnode(F) | inode(DF)
      8. CP | dnode(F) | inode(x) | inode(DF)
      
      For example, #3, the three conditions should be changed as follows.
      
         inode(x) | CP | dnode(F) | inode(x) | inode(F)
      a)    x       o      o          o          o
      b)    x       x      x          x          o
      c)    x       o      o          x          o
      
      If f2fs_sync_file stops   ------^,
       it should write inode(F)    --------------^
      
      So, the need_inode_block_update should return true, since
       c) get_nat_flag(e, HAS_LAST_FSYNC), is false.
      
      For example, #8,
            CP | alloc | dnode(F) | inode(x) | inode(DF)
      a)    o      x        x          x          x
      b)    x               x          x          o
      c)    o               o          x          o
      
      If f2fs_sync_file stops   -------^,
       it should write inode(DF)    --------------^
      
      Note that, the roll-forward policy should follow this rule, which means,
      if there are any missing blocks, we doesn't need to recover that inode.
      Signed-off-by: NHuang Ying <ying.huang@intel.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      88bd02c9
    • J
      f2fs: use meta_inode cache to improve roll-forward speed · 4c521f49
      Jaegeuk Kim 提交于
      Previously, all the dnode pages should be read during the roll-forward recovery.
      Even worsely, whole the chain was traversed twice.
      This patch removes that redundant and costly read operations by using page cache
      of meta_inode and readahead function as well.
      Reviewed-by: NChao Yu <chao2.yu@samsung.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      4c521f49
  8. 16 9月, 2014 2 次提交
  9. 10 9月, 2014 4 次提交
    • G
      f2fs: use lock-less list(llist) to simplify the flush cmd management · 721bd4d5
      Gu Zheng 提交于
      We use flush cmd control to collect many flush cmds, and flush them
      together. In this case, we use two list to manage the flush cmds
      (collect and dispatch), and one spin lock is used to protect this.
      In fact, the lock-less list(llist) is very suitable to this case,
      and we use simplify this routine.
      
      -
      v2:
      -use llist_for_each_entry_safe to fix possible use-after-free issue.
      -remove the unused field from struct flush_cmd.
      Thanks for Yu's suggestion.
      -
      Signed-off-by: NGu Zheng <guz.fnst@cn.fujitsu.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      721bd4d5
    • C
      f2fs: refactor flush_sit_entries codes for reducing SIT writes · 184a5cd2
      Chao Yu 提交于
      In commit aec71382 ("f2fs: refactor flush_nat_entries codes for reducing NAT
      writes"), we descripte the issue as below:
      
      "Although building NAT journal in cursum reduce the read/write work for NAT
      block, but previous design leave us lower performance when write checkpoint
      frequently for these cases:
      1. if journal in cursum has already full, it's a bit of waste that we flush all
         nat entries to page for persistence, but not to cache any entries.
      2. if journal in cursum is not full, we fill nat entries to journal util
         journal is full, then flush the left dirty entries to disk without merge
         journaled entries, so these journaled entries may be flushed to disk at next
         checkpoint but lost chance to flushed last time."
      
      Actually, we have the same problem in using SIT journal area.
      
      In this patch, firstly we will update sit journal with dirty entries as many as
      possible. Secondly if there is no space in sit journal, we will remove all
      entries in journal and walk through the whole dirty entry bitmap of sit,
      accounting dirty sit entries located in same SIT block to sit entry set. All
      entry sets are linked to list sit_entry_set in sm_info, sorted ascending order
      by count of entries in set. Later we flush entries in set which have fewest
      entries into journal as many as we can, and then flush dense set with merged
      entries to disk.
      
      In this way we can use sit journal area more effectively, also we will reduce
      SIT update, result in gaining in performance and saving lifetime of flash
      device.
      
      In my testing environment, it shows this patch can help to reduce SIT block
      update obviously.
      
      virtual machine + hard disk:
      fsstress -p 20 -n 400 -l 5
      		sit page num	cp count	sit pages/cp
      based		2006.50		1349.75		1.486
      patched		1566.25		1463.25		1.070
      
      Our latency of merging op is small when handling a great number of dirty SIT
      entries in flush_sit_entries:
      latency(ns)	dirty sit count
      36038		2151
      49168		2123
      37174		2232
      Signed-off-by: NChao Yu <chao2.yu@samsung.com>
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      184a5cd2
    • J
      f2fs: need fsck.f2fs when f2fs_bug_on is triggered · 9850cf4a
      Jaegeuk Kim 提交于
      If any f2fs_bug_on is triggered, fsck.f2fs is needed.
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      9850cf4a
    • J
      f2fs: retain inconsistency information to initiate fsck.f2fs · 2ae4c673
      Jaegeuk Kim 提交于
      This patch adds sbi->need_fsck to conduct fsck.f2fs later.
      This flag can only be removed by fsck.f2fs.
      Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
      2ae4c673
  10. 04 9月, 2014 1 次提交
  11. 22 8月, 2014 5 次提交
新手
引导
客服 返回
顶部