We accidentally dropped matching for DVO_PORT_DPE from the VBT mapping
table when we refactored the function.  Restore it.

Fixes: 4628142a ("drm/i915/rkl: provide port/phy mapping for vbt")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200606031803.3309624-1-matthew.d.roper@intel.com

This parameter is meant to be used when PSR issues are found as some
issues in the past was due wrong values set in VBT so this would be
a quick and easy way to ask users or for us to check if the issue is
due VBT values.

Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NGwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520212756.354623-1-jose.souza@intel.com

RKL doesn't have PSR2 HW tracking, it was replaced by software/manual
tracking.  The driver is required to track the areas that needs update
and program hardware to send selective updates.

So until the software tracking is implemented, PSR2 needs to be disabled
for platforms without PSR2 HW tracking.

BSpec: 50422
BSpec: 50424

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603211529.3005059-15-matthew.d.roper@intel.com

RKL uses DDI's A, B, TC1, and TC2 which need to map to combo PHY's A-D.

Bspec: 49181
Cc: Imre Deak <imre.deak@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603211529.3005059-6-matthew.d.roper@intel.comReviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>

As latest update we have now 2 voltage swing tables for DP over DKL
PHY with only one difference in Level 0 pre-emphasis 3.
So with 2 tables for DP is time to have one single function to return
all DKL voltage swing tables.

BSpec: 49292
Cc: Khaled Almahallawy <khaled.almahallawy@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Tested-by: NKhaled Almahallawy <khaled.almahallawy@intel.com>
Reviewed-by: Khaled Almahallawy<khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602205424.138143-1-jose.souza@intel.com

Previous patch didn't take into account all pipes
but only those in state, which could cause wrong
CDCLK conclcusions and calculations.
Also there was a severe issue with min_cdclk being
assigned to 0 every compare cycle.

Too bad this was found by me only after merge.
This could be also causing the issues in test, however
not clear - anyway marking this as fixing the
"Adjust CDCLK accordingly to our DBuf bw needs".

v2: - s/pipe/crtc->pipe/
    - save a bit of instructions by
      skipping inactive pipes, without
      getting 0 DBuf slice mask for it.
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Fixes: cd191546 ("drm/i915: Adjust CDCLK accordingly to our DBuf bw needs")
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601173058.5084-1-stanislav.lisovskiy@intel.com

Certain combo PHYs act as a compensation master to other PHYs and need
to be initialized with a special irefgen bit in the PORT_COMP_DW8
register.  Previously PHY A was the only compensation master (for PHYs
B & C), but RKL adds a fourth PHY which is slaved to PHY C instead.

Bspec: 49291
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603211529.3005059-12-matthew.d.roper@intel.com

The pin mapping for the final two outputs varies according to which PCH
is present on the platform:  with TGP the pins are remapped into the TC
range, whereas with CMP they stay in the traditional combo output range.

Bspec: 49181
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603211529.3005059-9-matthew.d.roper@intel.com

RKL uses the DDI A, DDI B, DDI USBC1, DDI USBC2 from the DE point of
view, so all DDI/pipe/transcoder register use these indexes to refer to
them. Combo phy and IO functions follow another namespace that we keep
as "enum phy". The VBT in theory would use the DE point of view, but
that does not happen in practice.

Provide a table to convert the child devices to the "correct" port
numbering we use. Now this is the output we get while reading the VBT:

DDIA:
[drm:intel_bios_port_aux_ch [i915]] using AUX A for port A (VBT)
[drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:275:DDI A]
[drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:275:DDI A]
[drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x1 for port A (VBT)

DDIB:
[drm:intel_bios_port_aux_ch [i915]] using AUX B for port B (platform default)
[drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:291:DDI B]
[drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x2 for port B (VBT)

DDI USBC1:
[drm:intel_bios_port_aux_ch [i915]] using AUX D for port D (VBT)
[drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:295:DDI D]
[drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:295:DDI D]
[drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x3 for port D (VBT)

DDI USBC2:
[drm:intel_bios_port_aux_ch [i915]] using AUX E for port E (VBT)
[drm:intel_dp_init_connector [i915]] Adding DP connector on [ENCODER:306:DDI E]
[drm:intel_hdmi_init_connector [i915]] Adding HDMI connector on [ENCODER:306:DDI E]
[drm:intel_hdmi_init_connector [i915]] Using DDC pin 0x9 for port E (VBT)

Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200603211529.3005059-7-matthew.d.roper@intel.com

Use max() instead of hand rolling it.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-8-ville.syrjala@linux.intel.comReviewed-by: NManasi Navare <manasi.d.navare@intel.com>

The DP spec says:
"When the combination of the requested pre-emphasis level and
 voltage swing exceeds the capability of a DPTX, the DPTX shall
 set the pre-emphasis level according to the request and use the
 highest voltage swing it can output with the given pre-emphasis level."
and
"When a DPTX reads a request beyond the limits of this Standard,
 the DPTX shall set the pre-emphasis level according to the request
 and set the highest voltage swing level it can output with the
 given pre-emphasis level. If a DPTX is requested for 9.5dB of
 pre-emphasis level (may be supported for a DPTX) and cannot support
 that level, it shall set the pre-emphasis level to the next
 highest level, 6dB."

Ie. we should first validate the pre-emphasis, and then select
the appropriate vswing for it.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-6-ville.syrjala@linux.intel.comReviewed-by: NManasi Navare <manasi.d.navare@intel.com>

Different platforms have different max vswing/preemph settings.
Turn that into a pair vfuncs so we can decouple intel_dp.c and
intel_ddi.c further.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-5-ville.syrjala@linux.intel.comReviewed-by: NManasi Navare <manasi.d.navare@intel.com>

According to the DP spec supporting vswing 1 + preemph 2 is
mandatory. We don't have the hw settings for that though. In
order to pretend to follow the DP spec let's just select
vswing 0 + preemph 2 in this case (the DP spec says to use
the requested preemph in preference to the vswing when the
requested values aren't supported).
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-4-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

IBX supports vswing level 3 and pre-emphasis level 3. Don't
limit it to level 2 for those.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-3-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

cpt/ppt support pre-emphasis level 3. Let's actually declare
support for it, instead of clamping things to level 2.

Also tweak the if-ladder in intel_dp_voltage_max() to match
intel_dp_pre_emphasis_max() to make it easier to compare them.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-2-ville.syrjala@linux.intel.comReviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>

Cometlake is a small refresh of Coffeelake, but since we have found out a
difference in the plaforms, we need to identify them as separate platforms.

Since we previously took Coffeelake/Cometlake as identical, update all
IS_COFFEELAKE() to also include IS_COMETLAKE().
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200602140541.5481-1-chris@chris-wilson.co.uk

If an error is encountered during the DSI initialization setup, the
drm connector object also needs to be cleaned up along with the encoder.
The error can happen due to a missing mode in the VBT or for other
reasons.

v2: Rephrase the commit message to make it more clear.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Signed-off-by: NVivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522202630.7604-1-vivek.kasireddy@intel.com

Small updates in dkl_de_emphasis_control field.

BSpec: 49292
Signed-off-by: NJosé Roberto de Souza <jose.souza@intel.com>
Reviewed-by: NKhaled Almahallawy <khaled.almahallawy@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200529232757.37832-1-jose.souza@intel.com

While the current locking/serialization of the global state
suffices for protecting the obj->state access and the actual
hardware reprogramming, we do have a problem with accessing
the old/new states during nonblocking commits.

The state computation and swap will be protected by the crtc
locks, but the commit_tails can finish out of order, thus also
causing the atomic states to be cleaned up out of order. This
would mean the commit that started first but finished last has
had its new state freed as the no-longer-needed old state by the
other commit.

To fix this let's just refcount the states. obj->state amounts
to one reference, and the intel_atomic_state holds extra references
to both its new and old global obj states.

Fixes: 0ef1905e ("drm/i915: Introduce better global state handling")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200527200245.13184-1-ville.syrjala@linux.intel.comReviewed-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>

Currently the plane property doesn't have support for YCBCR_BT2020,
which enables the corresponding color conversion mode on plane CSC.
Enabling the plane property for the planes for GLK & ICL+ platforms.
Also as per spec, update the Plane Color CSC from YUV601_TO_RGB709
to YUV601_TO_RGB601.

V2: Enabling support for YCBCT_BT2020 for HDR planes on
    platforms GLK & ICL

V3: Refined the condition check to handle GLK & ICL+ HDR planes
    Also added BT2020 handling in glk_plane_color_ctl.

V4: Combine If-else into single If

V5: Drop the checking for HDR planes and enable YCBCR_BT2020
    for platforms GLK & ICL+.

V6: As per Spec, update PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709
    to PLANE_COLOR_CSC_MODE_YUV601_TO_RGB601 as per Ville's
    feedback.

V7: Rebased

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: NUma Shankar <uma.shankar@intel.com>
Signed-off-by: NKishore Kadiyala <kishore.kadiyala@intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200601073544.11291-1-kishore.kadiyala@intel.com

There's no reason for I915_MODE_FLAG_INHERITED to exist as a flag
anymore. Just make it a boolean.

v2: Deal with sanitize_watermarks()

CC: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429103936.11850-1-ville.syrjala@linux.intel.com

Replace the use of mode->private_flags with a truly private bitmaks
in our own crtc state. We also need a copy in the crtc itself so the
vblank code can get at it. We already have scanline_offset in there
for a similar reason, as well as the vblank->hwmode which is assigned
via drm_calc_timestamping_constants(). Fortunately we now have a
nice place for doing the crtc_state->crtc copy in
intel_crtc_update_active_timings() which gets called both for
modesets and init/resume readout.

The one slightly iffy spot is the INHERITED flag which we want to
preserve until userspace/fb_helper does the first proper commit after
actually calling .detecti() on the connectors. Otherwise we don't have
the full sink capabilities (audio,infoframes,etc.) when .compute_config()
gets called and thus we will fail to enable those features when the
first userspace commit happens. The only internal commit we do prior to
that should be from intel_initial_commit() and there we can simply
preserve the INHERITED flag from the readout.

v2: Deal with INHERITED in sanitize_watermarks() as well

CC: Sam Ravnborg <sam@ravnborg.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200429103904.11727-1-ville.syrjala@linux.intel.com

Avoid a NULL dereference for a mismatched encoder type, hit when
probing state for all encoders.

This is a band aid to prevent the OOPS as the right fix is "probably to
swap the psr vs infoframes.enable checks, or outright disappear from
this function" (Ville).

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/1892Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200525124912.16019-1-chris@chris-wilson.co.uk

drivers/gpu/drm/i915/display/intel_dsb.c:177 intel_dsb_reg_write() warn: variable dereferenced before check 'dsb' (see line 175)

Fixes: afeda4f3 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: NAnimesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200524233900.25598-1-chris@chris-wilson.co.uk

Pre-allocate command buffer in atomic_commit using intel_dsb_prepare
function which also includes pinning and map in cpu domain.

No functional change is dsb write/commit functions.

Now dsb get/put function is removed and ref-count mechanism is
not needed. Below dsb api added to do respective job mentioned
below.

intel_dsb_prepare - Allocate, pin and map the buffer.
intel_dsb_cleanup - Unpin and release the gem object.

RFC: Initial patch for design review.
v2: included _init() part in _prepare(). [Daniel, Ville]
v3: dsb_cleanup called after cleanup_planes. [Daniel]
v4: dsb structure is moved to intel_crtc_state from intel_crtc. [Maarten]
v5: dsb get/put/ref-count mechanism removed. [Maarten]
v6: Based on review feedback following changes are added,
- replaced intel_dsb structure by pointer in intel_crtc_state. [Maarten]
- passing intel_crtc_state to dsp-api to simplify the code. [Maarten]
- few dsb functions prototype modified to simplify code.
v7: added few cosmetic changes suggested by Jani and null check for
crtc_state in dsb_cleanup removed as suggested by Maarten.
v8: changed the function parameter to intel_crtc_state* of
ivb_load_lut_ext_max() from intel_crtc. [Maarten]
v9: error handling improved in _write() and prepare(). [Maarten]

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@intel.com>
Signed-off-by: NAnimesh Manna <animesh.manna@intel.com>
Signed-off-by: NUma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520130737.11240-1-animesh.manna@intel.com

Removed duplicate include and fixed comment > 80 chars.

v2: Added newline after system include and between functions
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200522131843.20477-1-stanislav.lisovskiy@intel.com

No need to bump up CDCLK now, as it is now correctly
calculated, accounting for DBuf BW as BSpec says.
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519131117.17190-8-stanislav.lisovskiy@intel.com

According to BSpec max BW per slice is calculated using formula
Max BW = CDCLK * 64. Currently when calculating min CDCLK we
account only per plane requirements, however in order to avoid
FIFO underruns we need to estimate accumulated BW consumed by
all planes(ddb entries basically) residing on that particular
DBuf slice. This will allow us to put CDCLK lower and save power
when we don't need that much bandwidth or gain additional
performance once plane consumption grows.

v2: - Fix long line warning
    - Limited new DBuf bw checks to only gens >= 11

v3: - Lets track used Dbuf bw per slice and per crtc in bw state
      (or may be in DBuf state in future), that way we don't need
      to have all crtcs in state and those only if we detect if
      are actually going to change cdclk, just same way as we
      do with other stuff, i.e intel_atomic_serialize_global_state
      and co. Just as per Ville's paradigm.
    - Made dbuf bw calculation procedure look nicer by introducing
      for_each_dbuf_slice_in_mask - we often will now need to iterate
      slices using mask.
    - According to experimental results CDCLK * 64 accounts for
      overall bandwidth across all dbufs, not per dbuf.

v4: - Fixed missing const(Ville)
    - Removed spurious whitespaces(Ville)
    - Fixed local variable init(reduced scope where not needed)
    - Added some comments about data rate for planar formats
    - Changed struct intel_crtc_bw to intel_dbuf_bw
    - Moved dbuf bw calculation to intel_compute_min_cdclk(Ville)

v5: - Removed unneeded macro

v6: - Prevent too frequent CDCLK switching back and forth:
      Always switch to higher CDCLK when needed to prevent bandwidth
      issues, however don't switch to lower CDCLK earlier than once
      in 30 minutes in order to prevent constant modeset blinking.
      We could of course not switch back at all, however this is
      bad from power consumption point of view.

v7: - Fixed to track cdclk using bw_state, modeset will be now
      triggered only when CDCLK change is really needed.

v8: - Lock global state if bw_state->min_cdclk is changed.
    - Try getting bw_state only if there are crtcs in the commit
      (need to have read-locked global state)

v9: - Do not do Dbuf bw check for gens < 9 - triggers WARN
      as ddb_size is 0.

v10: - Lock global state for older gens as well.

v11: - Define new bw_calc_min_cdclk hook, instead of using
       a condition(Manasi Navare)

v12: - Fixed rebase conflict

v13: - Added spaces after declarations to make checkpatch happy.
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520150058.16123-1-stanislav.lisovskiy@intel.com

We quite often need now to iterate only particular dbuf slices
in mask, whether they are active or related to particular crtc.

v2: - Minor code refactoring
v3: - Use enum for max slices instead of macro

Let's make our life a bit easier and use a macro for that.
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519131117.17190-6-stanislav.lisovskiy@intel.com

So lets support it.

v2: - Fixed "from" field which got corrupted for some weird reason
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520145945.15997-1-stanislav.lisovskiy@intel.com

Checking with hweight8 if plane configuration had
changed seems to be wrong as different plane configs
can result in a same hamming weight.
So lets check the bitmask itself.

v2: Fixed "from" field which got corrupted for some weird reason
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200520145827.15887-1-stanislav.lisovskiy@intel.com

In Gen11+ whenever we might exceed DBuf bandwidth we might need to
recalculate CDCLK which DBuf bandwidth is scaled with.
Total Dbuf bw used might change based on particular plane needs.

Thus to calculate if cdclk needs to be changed it is not enough
anymore to check plane configuration and plane min cdclk, per DBuf
bw can be calculated only after wm/ddb calculation is done and
all required planes are added into the state. In order to keep
all min_cdclk related checks in one place let's extract it into
separate function, checking and modifying any_ms.
Reviewed-by: NManasi Navare <manasi.d.navare@intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519131117.17190-3-stanislav.lisovskiy@intel.com

We need to calculate cdclk after watermarks/ddb has been calculated
as with recent hw CDCLK needs to be adjusted accordingly to DBuf
requirements, which is not possible with current code organization.

Setting CDCLK according to DBuf BW requirements and not just rejecting
if it doesn't satisfy BW requirements, will allow us to save power when
it is possible and gain additional bandwidth when it's needed - i.e
boosting both our power management and perfomance capabilities.

This patch is preparation for that, first we now extract modeset
calculation from modeset checks, in order to call it after wm/ddb
has been calculated.

v2: - Extract only intel_modeset_calc_cdclk from intel_modeset_checks
      (Ville Syrjälä)

v3: - Clear plls after intel_modeset_calc_cdclk

v4: - Added r-b from previous revision to commit message
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NStanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NManasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200519131117.17190-2-stanislav.lisovskiy@intel.com

Since the number of platforms with this restriction are growing, let's
separate out the platform logic into a has_phy_misc() function.

Bspec: 50107
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-11-matthew.d.roper@intel.com

RKL power wells are similar to TGL power wells, but have some important
differences:

 * PG1 now has pipe A's VDSC (rather than sticking it in PG2)
 * PG2 no longer exists
 * DDI-C (aka TC-1) moves from PG1 -> PG3
 * PG5 no longer exists due to the lack of a fourth pipe

Also note that what we refer to as 'DDI-C' and 'DDI-D' need to actually
be programmed as TC-1 and TC-2 even though this platform doesn't have TC
outputs.

Bspec: 49234
Cc: Imre Deak <imre.deak@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnshuman Gupta <anshuman.gupta@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-9-matthew.d.roper@intel.com

RKL only has five universal planes, plus a cursor.  Since the
bottom-most universal plane is considered the primary plane, set the
number of sprites available on this platform to 4.

In general, the plane capabilities of the remaining planes stay the same
as TGL.  However the NV12 Y-plane support moves down to the new top two
planes and now only the bottom three planes can be used for NV12 UV.

Bspec: 49181
Bspec: 49251
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-8-matthew.d.roper@intel.com

The RKL platform has different memory characteristics from past
platforms.  Update the values used by our memory bandwidth calculations
accordingly.

Bspec: 53998
Cc: James Ausmus <james.ausmus@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-7-matthew.d.roper@intel.com

Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NMatt Roper <matthew.d.roper@intel.com>
Reviewed-by: NAnusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: NLucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504225227.464666-5-matthew.d.roper@intel.com

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN_ON over WARN_ON.

Conversion is done with below sementic patch:

@@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
...+>
}

@@
identifier func, T;
@@
func(struct intel_digital_port *T,...) {
+struct drm_i915_private *i915 = to_i915(T->base.base.dev);
<+...
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
...+>

}

changes since v1:
- Add i915 local variable and use it in drm_WARN_ON (Jani)
Signed-off-by: NPankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-5-pankaj.laxminarayan.bharadiya@intel.com

struct drm_device specific drm_WARN* macros include device information
in the backtrace, so we know what device the warnings originate from.

Prefer drm_WARN* over WARN* calls.

changes since v1:
- Added dev_priv local variable and used it in drm_WARN* calls (Jani)
Signed-off-by: NPankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200504181600.18503-4-pankaj.laxminarayan.bharadiya@intel.com