An extent type osd operation currently implies that there will
be corresponding data supplied in the data portion of the request
(for write) or response (for read) message.  Similarly, an osd class
method operation implies a data item will be supplied to receive
the response data from the operation.

Add a ceph_osd_data pointer to each of those structures, and assign
it to point to eithre the incoming or the outgoing data structure in
the osd message.  The data is not always available when an op is
initially set up, so add two new functions to allow setting them
after the op has been initialized.

Begin to make use of the data item pointer available in the osd
operation rather than the request data in or out structure in
places where it's convenient.  Add some assertions to verify
pointers are always set the way they're expected to be.

This is a sort of stepping stone toward really moving the data
into the osd request ops, to allow for some validation before
making that jump.

This is the first in a series of patches that resolve:
    http://tracker.ceph.com/issues/4657Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd request keeps a pointer to the osd operations (ops) array
that it builds in its request message.

In order to allow each op in the array to have its own distinct
data, we will need to keep track of each op's data, and that
information does not go over the wire.

As long as we're tracking the data we might as well just track the
entire (source) op definition for each of the ops.  And if we're
doing that, we'll have no more need to keep a pointer to the
wire-encoded version.

This patch makes the array of source ops be kept with the osd
request structure, and uses that instead of the version encoded in
the message in places where that was previously used.  The array
will be embedded in the request structure, and the maximum number of
ops we ever actually use is currently 2.  So reduce CEPH_OSD_MAX_OP
to 2 to reduce the size of the structure.

The result of doing this sort of ripples back up, and as a result
various function parameters and local variables become unnecessary.

Make r_num_ops be unsigned, and move the definition of struct
ceph_osd_req_op earlier to ensure it's defined where needed.

It does not yet add per-op data, that's coming soon.

This resolves:
    http://tracker.ceph.com/issues/4656Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

These are very small changes that make use osd_data local pointers
as shorthands for structures being operated on.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Define and use functions that encapsulate the initializion of a
ceph_osd_data structure.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Hold off building the osd request message in ceph_writepages_start()
until just before it will be submitted to the osd client for
execution.

We'll still create the request and allocate the page pointer array
after we learn we have at least one page to write.  A local variable
will be used to keep track of the allocated array of pages.  Wait
until just before submitting the request for assigning that page
array pointer to the request message.

Create ands use a new function osd_req_op_extent_update() whose
purpose is to serve this one spot where the length value supplied
when an osd request's op was initially formatted might need to get
changed (reduced, never increased) before submitting the request.

Previously, ceph_writepages_start() assigned the message header's
data length because of this update.  That's no longer necessary,
because ceph_osdc_build_request() will recalculate the right
value to use based on the content of the ops in the request.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Defer building the osd request until just before submitting it in
all callers except ceph_writepages_start().  (That caller will be
handed in the next patch.)
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is a helper function alloc_page_vec() that, despite its
generic sounding name depends heavily on an osd request structure
being populated with certain information.

There is only one place this function is used, and it ends up
being a bit simpler to just open code what it does, so get
rid of the helper.

The real motivation for this is deferring building the of the osd
request message, and this is a step in that direction.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Mostly for readability, define ceph_writepages_osd_request() and
use it to allocate the osd request for ceph_writepages_start().
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

This patch moves the call to ceph_osdc_build_request() out of
ceph_osdc_new_request() and into its caller.

This is in order to defer formatting osd operation information into
the request message until just before request is started.

The only unusual (ab)user of ceph_osdc_build_request() is
ceph_writepages_start(), where the final length of write request may
change (downward) based on the current inode size or the oldest
snapshot context with dirty data for the inode.

The remaining callers don't change anything in the request after has
been built.

This means the ops array is now supplied by the caller.  It also
means there is no need to pass the mtime to ceph_osdc_new_request()
(it gets provided to ceph_osdc_build_request()).  And rather than
passing a do_sync flag, have the number of ops in the ops array
supplied imply adding a second STARTSYNC operation after the READ or
WRITE requested.

This and some of the patches that follow are related to having the
messenger (only) be responsible for filling the content of the
message header, as described here:
    http://tracker.ceph.com/issues/4589Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There's one spot in ceph_writepages_start() that open-codes what
page_offset() does safely.  Use the macro so we don't have to worry
about wrapping.

This resolves:
    http://tracker.ceph.com/issues/4648Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Record the byte count for an osd request rather than the page count.
The number of pages can always be derived from the byte count (and
alignment/offset) but the reverse is not true.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd request defines information about where data to be read
should be placed as well as where data to write comes from.
Currently these are represented by common fields.

Keep information about data for writing separate from data to be
read by splitting these into data_in and data_out fields.

This is the key patch in this whole series, in that it actually
identifies which osd requests generate outgoing data and which
generate incoming data.  It's less obvious (currently) that an osd
CALL op generates both outgoing and incoming data; that's the focus
of some upcoming work.

This resolves:
    http://tracker.ceph.com/issues/4127Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

An osd request uses either pages or a bio list for its data.  Use a
union to record information about the two, and add a data type
tag to select between them.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Pull the fields in an osd request structure that define the data for
the request out into a separate structure.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Currently ceph_osdc_new_request() assigns an osd request's
r_num_pages and r_alignment fields.  The only thing it does
after that is call ceph_osdc_build_request(), and that doesn't
need those fields to be assigned.

Move the assignment of those fields out of ceph_osdc_new_request()
and into its caller.  As a result, the page_align parameter is no
longer used, so get rid of it.

Note that in ceph_sync_write(), the value for req->r_num_pages had
already been calculated earlier (as num_pages, and fortunately
it was computed the same way).  So don't bother recomputing it,
but because it's not needed earlier, move that calculation after the
call to ceph_osdc_new_request().  Hold off making the assignment to
r_alignment, doing it instead r_pages and r_num_pages are
getting set.

Similarly, in start_read(), nr_pages already holds the number of
pages in the array (and is calculated the same way), so there's no
need to recompute it.  Move the assignment of the page alignment
down with the others there as well.

This and the next few patches are preparation work for:
    http://tracker.ceph.com/issues/4127Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There's a spot that computes the number of pages to allocate for a
page-aligned length by just shifting it.  Use calc_pages_for()
instead, to be consistent with usage everywhere else.  The result
is the same.

The reason for this is to make it clearer in an upcoming patch that
this calculation is duplicated.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

commit 22cddde1 breaks the atomicity of write operation, it also
introduces a deadlock between write and truncate.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Reviewed-by: NGreg Farnum <greg@inktank.com>

Conflicts:
	fs/ceph/addr.c

Use the new version of the encoding for osd requests and replies.  In the
process, update the way we are tracking request ops and reply lengths and
results in the struct ceph_osd_request.  Update the rbd and fs/ceph users
appropriately.

The main changes are:
 - we keep pointers into the request memory for fields we need to update
   each time the request is sent out over the wire
 - we keep information about the result in an array in the request struct
   where the users can easily get at it.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

The "num_reply" parameter to ceph_osdc_new_request() is never
used inside that function, so get rid of it.

Note that ceph_sync_write() passes 2 for that argument, while all
other callers pass 1.  It doesn't matter, but perhaps someone should
verify this doesn't indicate a problem.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is only one caller of ceph_osdc_writepages(), and it always
passes 0 as its "flags" argument.  Get rid of that argument and
replace its use in ceph_osdc_writepages() with 0.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is only one caller of ceph_osdc_writepages(), and it always
passes 0 as its "dosync" argument.  Get rid of that argument and
replace its use in ceph_osdc_writepages() with 0.
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

There is only one caller of ceph_osdc_writepages(), and it always
passes the value true as its "nofail" argument.  Get rid of that
argument and replace its use in ceph_osdc_writepages() with the
constant value true.

This and a number of cleanup patches that follow resolve:
    http://tracker.ceph.com/issues/4126Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NJosh Durgin <josh.durgin@inktank.com>

Function start_read() can get an error before processing all pages.
It must not only release the remaining pages, but unlock them too.

This fixes http://tracker.newdream.net/issues/3370Signed-off-by: NDavid Zafman <david.zafman@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

ceph_aio_write() has an optimization that marks cap EPH_CAP_FILE_WR
dirty before data is copied to page cache and inode size is updated.
If ceph_check_caps() flushes the dirty cap before the inode size is
updated, MDS can miss the new inode size. The fix is move
ceph_{get,put}_cap_refs() into ceph_write_{begin,end}() and call
__ceph_mark_dirty_caps() after inode size is updated.
Signed-off-by: NYan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: NSage Weil <sage@inktank.com>

Move actual pte filling for non-linear file mappings into the new special
vma operation: ->remap_pages().

Filesystems must implement this method to get non-linear mapping support,
if it uses filemap_fault() then generic_file_remap_pages() can be used.

Now device drivers can implement this method and obtain nonlinear vma support.
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Carsten Otte <cotte@de.ibm.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>	#arch/tile
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Kentaro Takeda <takedakn@nttdata.co.jp>
Cc: Matt Helsley <matthltc@us.ibm.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Venkatesh Pallipadi <venki@google.com>
Acked-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A pgoff_t is defined (by default) to have type (unsigned long).  On
architectures such as i686 that's a 32-bit type.  The ceph address
space code was attempting to produce 64 bit offsets by shifting a
page's index by PAGE_CACHE_SHIFT, but the result was not what was
desired because the shift occurred before the result got promoted
to 64 bits.

Fix this by converting all uses of page->index used in this way to
use the page_offset() macro, which ensures the 64-bit result has the
intended value.

This fixes http://tracker.newdream.net/issues/3112Reported-by: NMohamed Pakkeer <pakkeer.mohideen@realimage.com>
Signed-off-by: NAlex Elder <elder@inktank.com>
Reviewed-by: NSage Weil <sage@inktank.com>

If we are creating an osd request and get an invalid layout, return
an EINVAL to the caller.  We switch up the return to have an error
code instead of NULL implying -ENOMEM.
Signed-off-by: NSage Weil <sage@inktank.com>
Reviewed-by: NAlex Elder <elder@inktank.com>

CC: Sage Weil <sage@newdream.net>
CC: ceph-devel@vger.kernel.org
Acked-by: NSage Weil <sage@newdream.net>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

I got lots of NULL pointer dereference Oops when compiling kernel on ceph.
The bug is because the kernel page migration routine replaces some pages
in the page cache with new pages, these new pages' private can be non-zero.
Signed-off-by: NZheng Yan <zheng.z.yan@intel.com>
Signed-off-by: NSage Weil <sage@inktank.com>
(cherry picked from commit 28c0254e)

I got lots of NULL pointer dereference Oops when compiling kernel on ceph.
The bug is because the kernel page migration routine replaces some pages
in the page cache with new pages, these new pages' private can be non-zero.
Signed-off-by: NZheng Yan <zheng.z.yan@intel.com>
Signed-off-by: NSage Weil <sage@inktank.com>

We have been using i_lock to protect all kinds of data structures in the
ceph_inode_info struct, including lists of inodes that we need to iterate
over while avoiding races with inode destruction.  That requires grabbing
a reference to the inode with the list lock protected, but igrab() now
takes i_lock to check the inode flags.

Changing the list lock ordering would be a painful process.

However, using a ceph-specific i_ceph_lock in the ceph inode instead of
i_lock is a simple mechanical change and avoids the ordering constraints
imposed by igrab().
Reported-by: NAmon Ott <a.ott@m-privacy.de>
Signed-off-by: NSage Weil <sage@newdream.net>

ceph_release_page_vector() kfrees the vector; we shouldn't do it here too.
Reported-by: NJeff Wu <cpwu@tnsoft.com.cn>
Signed-off-by: NSage Weil <sage@newdream.net>

The 'rsize' mount option limits the maximum size of an individual
read(ahead) operation that is sent off to an OSD.  This is distinct from
'rasize', which controls the size of the readahead window.
Signed-off-by: NSage Weil <sage@newdream.net>

When we get a ->readpages() aop, submit async reads for all page ranges
in the provided page list.  Lock the pages immediately, so that VFS/MM
will block until the reads complete.
Signed-off-by: NSage Weil <sage@newdream.net>

We should use ihold whenever we already have a stable inode ref, even
when we aren't holding i_lock.  This avoids adding new and unnecessary
locking dependencies.
Signed-off-by: NSage Weil <sage@newdream.net>

Since we pass the nofail arg, we should never get an error; BUG if we do.
(And fix the function to not return an error if __map_request fails.)
Signed-off-by: NSage Weil <sage@newdream.net>

rc is only ever 0 or negative in this method.
Signed-off-by: NSage Weil <sage@newdream.net>

We should unlock the page and return -ENOMEM if ceph_osdc_new_request
failed.
Signed-off-by: NHenry C Chang <henry_c_chang@tcloudcomputing.com>
Signed-off-by: NSage Weil <sage@newdream.net>

Fixes generated by 'codespell' and manually reviewed.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>