- 28 3月, 2012 8 次提交
-
-
由 Paul Mundt 提交于
This does some more tidying and converging of the header split, following the x86 example. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Polling for card hotplug events is a better option than using SDHI native hotplug interrupt, because the latter option forces the controller to stay permanently powered up and enabled. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
Now that userspace is making use of kernel-provided sanitized headers for working out supported interfaces, we need to be a bit more diligent with matching the syscall definitions with their actual wiring/support state. In theory it shouldn't hurt anything since sys_ni_syscall will ultimately do the right thing, but there's also not much need to lie about legacy x86 syscalls that we've never supported. This tightens things up a bit for uClibc at least. Suggested-by: NCarmelo Amoroso <carmelo.amoroso@st.com> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Shimoda, Yoshihiro 提交于
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Thomas Schwinge 提交于
If in big-endian mode, switch the PCI bus, too. Tested on both litte-endian and big-endian sh7785lcr. Signed-off-by: NThomas Schwinge <thomas@codesourcery.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nobuhiro Iwamatsu 提交于
CHCR of SH7763, SH7764, SH7780 and SH7785 is constitution same as SH7757. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nobuhiro Iwamatsu 提交于
CHCR of SH7723 and SH7730 is constitution same as SH7724. Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Reviewed-by: NSimon Horman <horms@verge.net.au> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Nobuhiro Iwamatsu 提交于
Other files are not done include definitely by asm/system.h made include in asm/bitops.h. This patch remove asm/system.h from asm/bitops.h. ----- LANG=C make ARCH=sh CROSS_COMPILE=sh4-linux-gnu- CHK include/linux/version.h CHK include/generated/utsrelease.h make[1]: `include/generated/machtypes.h' is up to date. CC arch/sh/kernel/asm-offsets.s In file included from include/asm-generic/getorder.h:7, from /home/iwamatsu/work/kernel/sh-2.6-devel/arch/sh/include/asm/page.h:187, from /home/iwamatsu/work/kernel/sh-2.6-devel/arch/sh/include/asm/mmu.h:38, from /home/iwamatsu/work/kernel/sh-2.6-devel/arch/sh/include/asm/system_32.h:5, from /home/iwamatsu/work/kernel/sh-2.6-devel/arch/sh/include/asm/system.h:179, from /home/iwamatsu/work/kernel/sh-2.6-devel/arch/sh/include/asm/bitops.h:10, from include/linux/bitops.h:22, from include/linux/thread_info.h:52, from include/linux/preempt.h:9, from include/linux/spinlock.h:50, from include/linux/mmzone.h:7, from include/linux/gfp.h:4, from include/linux/mm.h:8, from arch/sh/kernel/asm-offsets.c:13: include/linux/log2.h: In function '__ilog2_u32': include/linux/log2.h:34: error: implicit declaration of function 'fls' include/linux/log2.h: In function '__ilog2_u64': include/linux/log2.h:42: error: implicit declaration of function 'fls64' include/linux/log2.h: In function '__roundup_pow_of_two': include/linux/log2.h:63: error: implicit declaration of function 'fls_long' ----- Signed-off-by: NNobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 24 3月, 2012 1 次提交
-
-
由 Jason Baron 提交于
The motivation for this patchset was that I was looking at a way for a qemu-kvm process, to exclude the guest memory from its core dump, which can be quite large. There are already a number of filter flags in /proc/<pid>/coredump_filter, however, these allow one to specify 'types' of kernel memory, not specific address ranges (which is needed in this case). Since there are no more vma flags available, the first patch eliminates the need for the 'VM_ALWAYSDUMP' flag. The flag is used internally by the kernel to mark vdso and vsyscall pages. However, it is simple enough to check if a vma covers a vdso or vsyscall page without the need for this flag. The second patch then replaces the 'VM_ALWAYSDUMP' flag with a new 'VM_NODUMP' flag, which can be set by userspace using new madvise flags: 'MADV_DONTDUMP', and unset via 'MADV_DODUMP'. The core dump filters continue to work the same as before unless 'MADV_DONTDUMP' is set on the region. The qemu code which implements this features is at: http://people.redhat.com/~jbaron/qemu-dump/qemu-dump.patch In my testing the qemu core dump shrunk from 383MB -> 13MB with this patch. I also believe that the 'MADV_DONTDUMP' flag might be useful for security sensitive apps, which might want to select which areas are dumped. This patch: The VM_ALWAYSDUMP flag is currently used by the coredump code to indicate that a vma is part of a vsyscall or vdso section. However, we can determine if a vma is in one these sections by checking it against the gate_vma and checking for a non-NULL return value from arch_vma_name(). Thus, freeing a valuable vma bit. Signed-off-by: NJason Baron <jbaron@redhat.com> Acked-by: NRoland McGrath <roland@hack.frob.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Avi Kivity <avi@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 20 3月, 2012 1 次提交
-
-
由 Cong Wang 提交于
Signed-off-by: NCong Wang <amwang@redhat.com>
-
- 15 3月, 2012 1 次提交
-
-
由 Julia Lawall 提交于
Convert calls to free_irq so that the second argument is the same as the last argument of the corresponding call to request_irq. Without this property, free_irq does nothing. In the case of dmabrg.c the change is merely cosmetic - changing 0 to NULL. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 13 3月, 2012 12 次提交
-
-
由 Laurent Pinchart 提交于
The struct sh_mobile_lcdc_chan_cfg platform data contains a list of video modes. Name the lcd_cfg and num_cfg fields to reflect that they describe video modes. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Laurent Pinchart 提交于
Update board code accordingly. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Laurent Pinchart 提交于
Update board code accordingly. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Laurent Pinchart 提交于
The field is unused, remove it. Update board code accordingly. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
-
由 Magnus Damm 提交于
Convert remaining sh board code to use sh_clk_ops. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Convert sh5 to use sh_clk_ops. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Convert sh4a SoCs to use sh_clk_ops. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Convert sh4 SoCs to use sh_clk_ops. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Convert sh3 SoCs to use sh_clk_ops. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Convert sh2a SoCs to use sh_clk_ops. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Convert sh2 to use sh_clk_ops. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
由 Magnus Damm 提交于
Convert the sh include asm/clock.h to use sh_clk_ops. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl>
-
- 07 3月, 2012 3 次提交
-
-
由 Thomas Schwinge 提交于
Presently the SH7785 code misdefines the UBC clock connection ID in relation to the other CPUs. This makes it uniform, so that things like single-stepping work again. Signed-off-by: NThomas Schwinge <thomas@codesourcery.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Shimoda, Yoshihiro 提交于
Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Phil Edworthy 提交于
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
- 05 3月, 2012 1 次提交
-
-
由 Stephane Eranian 提交于
PERF_SAMPLE_BRANCH_* is disabled for: - SW events (sw counters, tracepoints) - HW breakpoints - ALL but Intel x86 architecture - AMD64 processors Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1328826068-11713-10-git-send-email-eranian@google.comSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 01 3月, 2012 1 次提交
-
-
由 Thomas Gleixner 提交于
Coccinelle based conversion. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/n/tip-24swm5zut3h9c4a6s46x8rws@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>
-
- 24 2月, 2012 6 次提交
-
-
由 Phil Edworthy 提交于
Signed-off-by: NPhil Edworthy <phil.edworthy@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Shimoda, Yoshihiro 提交于
The latest sh_eth driver needs a resource of TSU in the channel 1, if the controller has TSU registers. So, this patch adds the resource. Signed-off-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Rusty Russell 提交于
This has been obsolescent for a while; time for the final push. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-sh@vger.kernel.org Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Masanari Iida 提交于
Correct spelling "erorr" to "error" in arch/sh/drivers/pci/pci-sh7780.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Bjorn Helgaas 提交于
Everybody uses the generic pcibios_resource_to_bus() supplied by the core now, so remove the ARCH_HAS_GENERIC_PCI_OFFSETS used during conversion. Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
由 Bjorn Helgaas 提交于
Tell the PCI core about host bridge address translation so it can take care of bus-to-resource conversion for us. CC: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
-
- 06 2月, 2012 1 次提交
-
-
由 Masanari Iida 提交于
Correct spelling "erorr" to "error" in arch/sh/drivers/pci/pci-sh7780.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 03 2月, 2012 1 次提交
-
-
由 Kuninori Morimoto 提交于
Current FSI got each PortA/B parameter by porta_flags/portb_flags from platform. And .set_rate function was shared for PortA/B. This structure was not readable and not flexible. This patch adds sh_fsi_port_info, and its own settings was added on each platform. it is preparation for DMAEngine support Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
-
- 01 2月, 2012 1 次提交
-
-
由 Michael S. Tsirkin 提交于
commit 43db595e (sh: switch to GENERIC_PCI_IOMAP) failed to take into account the PCI channels's io_map_base for mapping IO BARs. This also caused a new warning on sh. Fix this, without re-introducing code duplication, by setting NO_GENERIC_PCI_IOPORT_MAP and supplying a sh-specific __pci_ioport_map. Reported-by: NKevin Cernekee <cernekee@gmail.com> Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
-
- 27 1月, 2012 3 次提交
-
-
由 Paul Mundt 提交于
scaling_available_freqs is provided generically for drivers that are using frequency table based rounding. This will be optional for our case, but the generic code already takes that in to consideration, so we can simply wire it up outright. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
The general case for platforms that support the clock framework fully will be rate table rounding, while others will have to fall back on much coarser general rate rounding. Notify about it during boot so the limited functionality for the given subtype is appropriately noted. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Paul Mundt 提交于
This adds support for the frequency table provided by the clock framework under the struct clk definition (if available). In cases where no table is generated or otherwise supported, we fall back on coarse grained scaling via clock framework rounding, as before. Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-