- 31 7月, 2012 2 次提交
-
-
由 Hans de Goede 提交于
1) The gspca-core's suspend/resume code is such that resume being called after a reset is safe / ok. 2) All devices tested sofar seem to need the reset_resume callback to work properly over a suspend 3) The USB-core won't call the reset_resume callback for devices which don't need it Thus it seems the simplest and the best to just add the callback to all sub-drivers, rather then adding the callbacks one-by-one as each driver gets tested with suspend/resume. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antonio Ospite 提交于
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 12 6月, 2012 2 次提交
-
-
由 Jean-Francois Moine 提交于
The ov534 bridge is too slow to handle the sensor accesses requested by fast hosts giving 'sccb_reg_write failed'. A small delay fixes the problem. Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antonio Ospite 提交于
Even if the best results are indeed achieved with both AGC and AWB enabled, the webcam is capable of setting these independently, and the user can see the difference of any of the 4 combinations of these two boolean controls. Removing the dependency from one another simplifies the code and gives more control to the user. Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 5月, 2012 2 次提交
-
-
由 Antonio Ospite 提交于
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antonio Ospite 提交于
Also merge the "COLORS" control into it as it was V4L2_CID_SATURATION anyway. Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 11月, 2011 1 次提交
-
-
由 Greg Kroah-Hartman 提交于
This converts the drivers in drivers/media/* to use the module_usb_driver() macro which makes the code smaller and a bit simpler. Added bonus is that it removes some unneeded kernel log messages about drivers loading and/or unloading. Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Luca Risolia <luca.risolia@studio.unibo.it> Cc: Jean-Francois Moine <moinejf@free.fr> Cc: Frank Zago <frank@zago.net> Cc: Olivier Lorin <o.lorin@laposte.net> Cc: Erik Andren <erik.andren@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Brian Johnson <brijohn@gmail.com> Cc: Leandro Costantino <lcostantino@gmail.com> Cc: Antoine Jacquet <royale@zerezo.com> Cc: Jarod Wilson <jarod@redhat.com> Cc: Florian Mickler <florian@mickler.org> Cc: Antti Palosaari <crope@iki.fi> Cc: Michael Krufky <mkrufky@kernellabs.com> Cc: "David Härdeman" <david@hardeman.nu> Cc: Florent Audebert <florent.audebert@anevia.com> Cc: Sam Doshi <sam@metal-fish.co.uk> Cc: Manu Abraham <manu@linuxtv.org> Cc: Olivier Grenie <olivier.grenie@dibcom.fr> Cc: Patrick Boettcher <patrick.boettcher@dibcom.fr> Cc: "Igor M. Liplianin" <liplianin@me.by> Cc: Derek Kelly <user.vdr@gmail.com> Cc: Malcolm Priestley <tvboxspy@gmail.com> Cc: Steven Toth <stoth@kernellabs.com> Cc: "André Weidemann" <Andre.Weidemann@web.de> Cc: Martin Wilks <m.wilks@technisat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Jose Alberto Reguero <jareguero@telefonica.net> Cc: David Henningsson <david.henningsson@canonical.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Joe Perches <joe@perches.com> Cc: Jesper Juhl <jj@chaosbits.net> Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Alexey Khoroshilov <khoroshilov@ispras.ru> Cc: Anssi Hannula <anssi.hannula@iki.fi> Cc: Rafi Rubin <rafi@seas.upenn.edu> Cc: Dan Carpenter <error27@gmail.com> Cc: Paul Bender <pebender@gmail.com> Cc: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: "Márcio A Alves" <froooozen@gmail.com> Cc: Julia Lawall <julia@diku.dk> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Chris Rankin <rankincj@yahoo.com> Cc: Lee Jones <lee.jones@canonical.com> Cc: Andy Walls <awalls@md.metrocast.net> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Dean Anderson <linux-dev@sensoray.com> Cc: Pete Eberlein <pete@sensoray.com> Cc: Arvydas Sidorenko <asido4@gmail.com> Cc: Andrea Anacleto <andreaanacleto@libero.it> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 04 9月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Add pr_fmt. Convert usb style logging macros to pr_<level>. Remove now unused old usb style logging macros. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 22 3月, 2011 3 次提交
-
-
由 Jean-François Moine 提交于
Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 1月, 2011 3 次提交
-
-
由 Jean-François Moine 提交于
Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
__devinit* must not be used in USB drivers. Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 29 12月, 2010 1 次提交
-
-
由 Jean-François Moine 提交于
Also, in ov534, don't check the parm type. Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 21 10月, 2010 2 次提交
-
-
由 Jean-François Moine 提交于
Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 03 8月, 2010 2 次提交
-
-
由 Jean-François Moine 提交于
This patch fixes possible race conditions in queue management with SMP: when a frame was completed, the irq function tried to use the next frame buffer. At this time, it was possible that the application on an other processor updated the frame pointer, making the image to point to a bad buffer. The patch contains two main changes: - the image transfer uses the queue indexes which are protected against simultaneous memory access, - the image pointer which is used for image concatenation is only set at interrupt level. Some subdrivers which used the image pointer have been updated. Reported-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-François Moine 提交于
The image pointer and its length are now in the main structure instead of in the frame buffer. They are updated on application vidioc_qbuf and in the URB interrupt function when ending an image. Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 18 5月, 2010 12 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Max Thrun 提交于
Signed-off-by: NMax Thrun <bear24rw@gmail.com> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mosalam Ebrahimi 提交于
Note that setting this options to 50Hz can reduce the framerate, so it is still disabled (60Hz) by default. Signed-off-by: NMosalam Ebrahimi <m.ebrahimi@ieee.org> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antonio Ospite 提交于
* Indent with tabs, not with spaces, nor with mixed style. * Less indentation for controls index comments. * Use lowercase hex digits. Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Max Thrun 提交于
Also set default values unconditionally, for readability. Signed-off-by: NMax Thrun <bear24rw@gmail.com> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Max Thrun 提交于
* Adjust comments for sharpness control * Set default value unconditionally, for readability Signed-off-by: NMax Thrun <bear24rw@gmail.com> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Max Thrun 提交于
Set only the needed bits for AWB, and enable it by default. Signed-off-by: NMax Thrun <bear24rw@gmail.com> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antonio Ospite 提交于
Document that even if the state is a u8 value, both MSB and LSB are set as sd->exposure represents half of the value we are going to set into registers. Skip setting exposure when AEC is enabled. Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Max Thrun 提交于
This also makes manual exposure actually work: it never worked before because AEC was always enabled. Signed-off-by: NMax Thrun <bear24rw@gmail.com> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Max Thrun 提交于
* Use 'agc' instead of 'autogain' in the code so to align the naming as in AEC/AWB. * Tweak brightness and contrast default values. * Fix setting/resetting registers values for AGC. * Set actual gain back when disabling AGC. * Skip setting GAIN register when AGC is enabled. * Enable AGC by default. Note that as Auto Gain Control is now enabled by default, if you are using the driver for visual computing applications you might need to disable it explicitly in your software. Signed-off-by: NMax Thrun <bear24rw@gmail.com> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antonio Ospite 提交于
Hue control doesn't work and the sensor datasheet is not clear about how to set hue properly. Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Max Thrun 提交于
Remove Blue/Red Channel Target Value, they are meant for Black Level Calibration but it is not completely clear how to use them. Signed-off-by: NMax Thrun <bear24rw@gmail.com> Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-François Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 27 2月, 2010 4 次提交
-
-
由 Antonio Ospite 提交于
Fix a regression, introduced in the driver split, which made the ov534 driver unusable. Plus, the debug message should reflect that we discard also packets beyond the expected frame size. Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antonio Ospite 提交于
Signed-off-by: NAntonio Ospite <ospite@studenti.unina.it> Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
The two sensors ov772x and ov965x have too much differences. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Marton Nemeth 提交于
The ctrls field of struct sd_desc is declared as const in gspca.h. It is worth to initialize the content also with constant values. Signed-off-by: NMarton Nemeth <nm127@freemail.hu> Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 17 1月, 2010 1 次提交
-
-
由 Jean-Francois Moine 提交于
This warning prevented the sharpness setting to work with the ov965x sensor. Reported-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 12月, 2009 4 次提交
-
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jean-Francois Moine 提交于
Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-