- 25 1月, 2014 5 次提交
-
-
由 Gavin Shan 提交于
The adapter is freed before we check its flags. It was caused by commit 144be3d9 ("net/cxgb4: Avoid disabling PCI device for towice"). The problem was reported by Intel's "0-day" tool. The patch fixes it to avoid reverting commit 144be3d9. Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
commit 25fb6ca4 "net IPv6 : Fix broken IPv6 routing table after loopback down-up" allocates addrconf router for ipv6 address when lo device up. but commit a881ae1f "ipv6:don't call addrconf_dst_alloc again when enable lo" breaks this behavior. Since the addrconf router is moved to the garbage list when lo device down, we should release this router and rellocate a new one for ipv6 address when lo device up. This patch solves bug 67951 on bugzilla https://bugzilla.kernel.org/show_bug.cgi?id=67951 change from v1: use ip6_rt_put to repleace ip6_del_rt, thanks Hannes! change code style, suggested by Sergei. CC: Sabrina Dubroca <sd@queasysnail.net> CC: Hannes Frederic Sowa <hannes@stressinduktion.org> Reported-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Oliver Hartkopp 提交于
The two commits 0115e8e3 (net: remove delay at device dismantle) and 748e2d93 (net: reinstate rtnl in call_netdevice_notifiers()) silently removed a NULL pointer check for in_dev since Linux 3.7. This patch re-introduces this check as it causes crashing the kernel when setting small mtu values on non-ip capable netdevices. Signed-off-by: NOliver Hartkopp <socketcan@hartkopp.net> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next由 David S. Miller 提交于
John W. Linville says: ==================== Please pull these fixes for the 3.14 stream! For the iwlwifi fix, Emmanuel says: "A critical bug has been reported on all NICs supported by iwldvm. iwlwifi would simply panic upon interface up This patch fixes this. The offending code is by me and is present in wireless-next.git and hence in net-next.git." Along with that... Andreas Fenkart corrects a WoWLAN problem with mwifiex. Roman Dubtsov adds a device ID to rt2800usb. Sujith Manoharan re-enables a mistakenly commented-out line of code in ath9k, and also fixes and interrupt mitigation issue for that driver. ZHAO Gang fixes an incorrect assignment (reverse/wrong API call) in b43. Please let me know if there are problems! ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 John W. Linville 提交于
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
-
- 24 1月, 2014 29 次提交
-
-
由 Jiri Pirko 提交于
This is in net-next only, for couple of days. Not used anymore, and never should have been. So just remove it and pretend it was never there. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
This check is not needed because the same check is done before fill_slave_info is used in rtnl_link_slave_info_fill. Also, by removing this check, kernel will fillup IFLA_INFO_SLAVE_KIND even for slaves of masters which does not implement fill_slave_info. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Himanshu Madhani says: ==================== qlcnic: Refactoring and enhancements for all adapters. This patch series contains following patches. o Enhanced debug data collection when we are in Tx-timeout situation. o Enhanced MSI-x vector calculation for defualt load path as well as for TSS/RSS ring change path. o Refactored interrupt coalescing code for all adapters. o Refactored interrupt handling as well as cleanup of poll controller code patch for all adapters. o changed rx_mac_learn type to boolean. Please apply to net-next. ==================== Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Refactored MSI-x vector calculation for All adapters. Decoupled logic in the code which was using same call to request MSI-x vectors in default driver load, as well as during set_channel() operation for TSS/RSS. This refactoring simplifies code for TSS/RSS code path as well as probe path of the driver load for all adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Refactor configuration of interrupt coalescing parameters for all supported adapters. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
Add support for MSI/MSI-X mode in poll controller routine. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
o Added hardware ops for interrupt enable/disable functions Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NShahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Himanshu Madhani 提交于
o Dump each Tx queue details with all descriptors, queue indices and Tx queue stats to imporve data colletion in situations where Tx timeout occurs. Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sucheta Chakraborty 提交于
o Use boolean type instead of u8. Signed-off-by: NSucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Nikolay Aleksandrov 提交于
After the option conversion downdelay and updelay divide a u64 and on a 32 bit this causes the following errors: ERROR: "__udivdi3" [drivers/net/bonding/bonding.ko] undefined! ERROR: "__umoddi3" [drivers/net/bonding/bonding.ko] undefined! Fix it by using a normal int instead because newval->value is capped at INT_MAX by the way the option is defined. Signed-off-by: NNikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
As part of a workaround for a hardware erratum in the SFC9100 family (SF bug 35388), the TX_DESC_UPD_DWORD register address is also used for communicating with the event block, and only descriptor pointer values < 2048 are valid. If the TX DMA ring size is increased to 4096 descriptors (which the firmware still allows) then we may write a descriptor pointer value >= 2048, which has entirely different and undesirable effects! Limit the TX DMA ring size correctly when this workaround is in effect. Fixes: 8127d661 ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NShradha Shah <sshah@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shradha Shah 提交于
I will be taking over the work from Ben Hutchings. Signed-off-by: NShradha Shah <sshah@solarflare.com> Acked-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Or Gerlitz 提交于
Make sure the practice set by commit 0afb1666 "vxlan: Add capability of Rx checksum offload for inner packet" is applied when the skb goes through the portion of the RX code which is shared between vxlan netdevices and ovs vxlan port instances. Cc: Joseph Gasparakis <joseph.gasparakis@intel.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
In this situation then ARRAY_SIZE() and sizeof() are the same, but we're really dealing with array indexes and not byte offsets so ARRAY_SIZE() is cleaner. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Acked-by: NGrant Grundler <grundler@parisc-linux.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Duan Jiong 提交于
commit a6222602("ip_tunnel: fix kernel panic with icmp_dest_unreach") clear IPCB in ip_tunnel_xmit() , or else skb->cb[] may contain garbage from GSO segmentation layer. But commit 0e6fbc5b("ip_tunnels: extend iptunnel_xmit()") refactor codes, and it clear IPCB behind the dst_link_failure(). So clear IPCB in ip_tunnel_xmit() just like commti a6222602("ip_tunnel: fix kernel panic with icmp_dest_unreach"). Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gavin Shan 提交于
We possibly retrieve the adapter's statistics during EEH recovery and that should be disallowed. Otherwise, it would possibly incur replicate EEH error and EEH recovery is going to fail eventually. The patch reuses statistics lock and checks net_device is attached before going to retrieve statistics, so that the problem can be avoided. Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gavin Shan 提交于
If we have EEH error happens to the adapter and we have to remove it from the system for some reasons (e.g. more than 5 EEH errors detected from the device in last hour), the adapter will be disabled for towice separately by eeh_err_detected() and remove_one(), which will incur following unexpected backtrace. The patch tries to avoid it. WARNING: at drivers/pci/pci.c:1431 CPU: 12 PID: 121 Comm: eehd Not tainted 3.13.0-rc7+ #1 task: c0000001823a3780 ti: c00000018240c000 task.ti: c00000018240c000 NIP: c0000000003c1e40 LR: c0000000003c1e3c CTR: 0000000001764c5c REGS: c00000018240f470 TRAP: 0700 Not tainted (3.13.0-rc7+) MSR: 8000000000029032 <SF,EE,ME,IR,DR,RI> CR: 28000024 XER: 00000004 CFAR: c000000000706528 SOFTE: 1 GPR00: c0000000003c1e3c c00000018240f6f0 c0000000010fe1f8 0000000000000035 GPR04: 0000000000000000 0000000000000000 00000000003ae509 0000000000000000 GPR08: 000000000000346f 0000000000000000 0000000000000000 0000000000003fef GPR12: 0000000028000022 c00000000ec93000 c0000000000c11b0 c000000184ac3e40 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 c0000000009398d8 c00000000101f9c0 c0000001860ae000 GPR28: c000000182ba0000 00000000000001f0 c0000001860ae6f8 c0000001860ae000 NIP [c0000000003c1e40] .pci_disable_device+0xd0/0xf0 LR [c0000000003c1e3c] .pci_disable_device+0xcc/0xf0 Call Trace: [c0000000003c1e3c] .pci_disable_device+0xcc/0xf0 (unreliable) [d0000000073881c4] .remove_one+0x174/0x320 [cxgb4] [c0000000003c57e0] .pci_device_remove+0x60/0x100 [c00000000046396c] .__device_release_driver+0x9c/0x120 [c000000000463a20] .device_release_driver+0x30/0x60 [c0000000003bcdb4] .pci_stop_bus_device+0x94/0xd0 [c0000000003bcf48] .pci_stop_and_remove_bus_device+0x18/0x30 [c00000000003f548] .pcibios_remove_pci_devices+0xa8/0x140 [c000000000035c00] .eeh_handle_normal_event+0xa0/0x3c0 [c000000000035f50] .eeh_handle_event+0x30/0x2b0 [c0000000000362c4] .eeh_event_handler+0xf4/0x1b0 [c0000000000c12b8] .kthread+0x108/0x130 [c00000000000a168] .ret_from_kernel_thread+0x5c/0x74 Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mugunthan V N 提交于
Enable promiscuous mode support for CPSW. Signed-off-by: NMugunthan V N <mugunthanvnm@ti.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
When we have multiple devices attempting to sync the same address to a single destination, each device should be permitted to sync it once. To accomplish this, pass the 'sync_cnt' of the source address when adding the addresss to the lower device. 'sync_cnt' tracks how many time a given address has been succefully synced. This way, we know that if the 'sync_cnt' passed in is 0, we should sync this address. Also, turn 'synced' member back into the counter as was originally done in commit 4543fbef. net: count hw_addr syncs so that unsync works properly. It tracks how many time a given address has been added via a 'sync' operation. For every successfull 'sync' the counter is incremented, and for ever 'unsync', the counter is decremented. This makes sure that the address will be properly removed from the the lower device when all the upper devices have removed it. Reported-by: NAndrey Dmitrov <andrey.dmitrov@oktetlabs.ru> CC: Andrey Dmitrov <andrey.dmitrov@oktetlabs.ru> CC: Alexandra N. Kossovsky <Alexandra.Kossovsky@oktetlabs.ru> CC: Konstantin Ushakov <Konstantin.Ushakov@oktetlabs.ru> Signed-off-by: NVlad Yasevich <vyasevic@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Shlomo Pongratz 提交于
Fixed few issues around using __rcu prefix and rcu_assign_pointer, also fixed a warning print to use ntohs(port) and not htons(port). net/ipv4/udp_offload.c:112:9: error: incompatible types in comparison expression (different address spaces) net/ipv4/udp_offload.c:113:9: error: incompatible types in comparison expression (different address spaces) net/ipv4/udp_offload.c:176:19: error: incompatible types in comparison expression (different address spaces) Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Paasch 提交于
A socket may be v6/v4-mapped. In that case sk->sk_family is AF_INET6, but the IP being used is actually an IPv4-address. Current's tcp-metrics will thus represent it as an IPv6-address: root@server:~# ip tcp_metrics ::ffff:10.1.1.2 age 22.920sec rtt 18750us rttvar 15000us cwnd 10 10.1.1.2 age 47.970sec rtt 16250us rttvar 10000us cwnd 10 This patch modifies the tcp-metrics so that they are able to handle the v6/v4-mapped sockets correctly. Signed-off-by: NChristoph Paasch <christoph.paasch@uclouvain.be> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sujith Manoharan 提交于
The threshold values for RX interrupt mitigation are different for AR9003 and AR9002 families. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Roman Dubtsov 提交于
Signed-off-by: NRoman Dubtsov <dubtsov@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith Manoharan 提交于
The commit "ath9k: Process GTT interrupts" accidentally had a line that was commented out. Signed-off-by: NSujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 ZHAO Gang 提交于
Use the right function to update frequency value. If rx skb is probe response or beacon, the wrong frequency value can cause problem that bss info can't be updated when it should be. Cc: <stable@vger.kernel.org> Fixes: 8318d78a ("cfg80211 API for channels/bitrates, mac80211 and driver conversion") Signed-off-by: NZHAO Gang <gamerh2o@gmail.com> Acked-by: NLarry Finger <Larry.Finger@lwfinger.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Andreas Fenkart 提交于
8 bytes preamble 14 bytes src/dst/eth_type 6 bytes 0xff:0xff.. http://en.wikipedia.org/wiki/Wake-on-LAN#Magic_packet http://en.wikipedia.org/wiki/EtherType This will fail if we VLAN or the magic packet is encapsulated as a UDP packet... Signed-off-by: NAndreas Fenkart <afenkart@gmail.com> Acked-by: NBing Zhao <bzhao@marvell.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 23 1月, 2014 6 次提交
-
-
由 Yann Droneaud 提交于
Since commit 8df8c56a, 6lowpan_iphc is a module of its own. Unfortunately, it lacks some infrastructure to behave like a good kernel citizen: kernel: 6lowpan_iphc: module license 'unspecified' taints kernel. kernel: Disabling lock debugging due to kernel taint This patch adds the basic MODULE_LICENSE(); with GPL license: the code was copied from net/ieee802154/6lowpan.c which is GPL and the module exports symbol with EXPORT_SYMBOL_GPL();. Cc: Jukka Rissanen <jukka.rissanen@linux.intel.com> Cc: Alexander Aring <alex.aring@gmail.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: NYann Droneaud <ydroneaud@opteya.com> Acked-by: NMarcel Holtmann <marcel@holtmann.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weilong Chen 提交于
Like bonding, team as netdevice doesn't cross netns boundaries. Team ports and team itself live in same netns. Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Weilong Chen 提交于
Like bridge, bonding as netdevice doesn't cross netns boundaries. Bonding ports and bonding itself live in same netns. Signed-off-by: NWeilong Chen <chenweilong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
No longer used API bond-specific can be removed now. This is now handled in a generic way in rtnl_link_ops. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Recent patch bonding: add netlink attributes to slave link dev (1d3ee88a) Introduced yet another device specific way to access slave information over rtnetlink. There is one already there for bridge. This patch introduces generic way to do this, for getting and setting info as well by extending link_ops. Later on, this new interface will be used for bridge ports as well. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-