Consolidate various checks if MR is ODP backed to one simple helper and
update call sites to use it.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Device capability bits are exposing what specific device supports from HW
perspective. Those bits are not dependent on kernel configurations and
RDMA/core should ensure that proper interfaces to users will be disabled
if CONFIG_INFINIBAND_ON_DEMAND_PAGING is not set.

Fixes: f4056bfd ("IB/core: Add on demand paging caps to ib_uverbs_ex_query_device")
Fixes: 8cdd312c ("IB/mlx5: Implement the ODP capability query verb")
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

CONFIG_INFINIBAND_ON_DEMAND_PAGING is used in general structures to
micro-optimize the memory footprint. Remove it, so it will allow us to
simplify various ODP device flows.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Longer term testing shows this patch didn't play well with MR cache and
caused to call traces during remove_mkeys().

This reverts commit bb7e22a8.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

From device point of view both XRC target and initiator are XRC transport
type.

Fix to use the expected UID as was handled for the XRC target case to
allow its usage via verbs in DEVX context.

Fixes: 5aa3771d ("IB/mlx5: Allow XRC usage via verbs in DEVX context")
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The "num_actions" variable needs to be signed for the error handling to
work.  The maximum number of actions is less than 256 so int type is large
enough for that.

Fixes: cbfdd442 ("IB/uverbs: Add helper to get array size from ptr attribute")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The per-port Q counter is some kernel resource and as such may be used by
few UID(s) upon DEVX usage.

To enable using it for QP/RQ when DEVX context is used need to allocate it
with a sharing mode indication to let firmware allows its usage.

The UID = 0xffff was chosen to mark it.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The destroy_workqueue on error unwind is missing, and the code jumps to
the wrong exit label.

Fixes: 813e90b1 ("IB/mlx5: Add advise_mr() support")
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

On NVMe offloads connection with many IO queues, EEH takes long time to
recover. The culprit is the synchronize_srcu in the destroy_mkey. The
solution is to use synchronize_srcu only for ODP mkey.

Fixes: b4cfe447 ("IB/mlx5: Implement on demand paging by adding support for MMU notifiers")
Signed-off-by: NHuy Nguyen <huyn@mellanox.com>
Reviewed-by: NDaniel Jurgens <danielj@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When dealing with netdev unregister events, we just need to know that this
is our currently bounded netdev. There's no need to do any further
checks/queries.

This patch doesn't change any functionality.
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

During testing the command format was changed to close a security
hole. Revise the driver to use the command format that will actually be
supported in GA firmware.

Both the UMEM and UCTX are intended only for use by the kernel and cannot
be executed using a general command.

Since the UMEM and CTX are not part of the general object the caps bits
were moved to be some log_xxx location in the general HCA caps.

The firmware code was adapted as well to match the above.

Fixes: a8b92ca1 ("IB/mlx5: Introduce DEVX")
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NAchiad Shochat <achiad@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Use uid as part of alloc/dealloc transport domain to let firmware manages
the resources correctly.

Fixes: d2d19121 ("IB/mlx5: Set uid as part of TD commands")
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce a 'flags' field to destroy address handle callback and add a
flag that marks whether the callback is executed in an atomic context or
not.

This will allow drivers to wait for completion instead of polling for it
when it is allowed.
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Introduce a 'flags' field to create address handle callback and add a flag
that marks whether the callback is executed in an atomic context or not.

This will allow drivers to wait for completion instead of polling for it
when it is allowed.
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When CONFIG_INFINIBAND_ON_DEMAND_PAGING is not enabled, we were getting
build failures for defined but not used code.  Fix that.

Fixes: 813e90b1 ("IB/mlx5: Add advise_mr() support")
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Drivers should be using udata to determine if a method is invoked from
user space or kernel space. A pd does not necessarily say a different
objects is kernel or user.

Transforming the tests to use udata eliminates a large number of uobject
references from the drivers.
Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The verb advise_mr() is used to give advice to the kernel about an address
range that belongs to a MR.  Implement the verb and register it on the
device. The current implementation supports the only known advice to date,
prefetch.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NGuy Levi <guyle@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When the parser of an ioctl command has the knowledge that a ptr attribute
in a bundle represents an array of structures, it is useful for it to know
the number of elements in the array. This is done by dividing the
attribute length with the element size.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Reviewed-by: NGuy Levi <guyle@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Fix typo in 'set_mr_fileds' -> 'set_mr_fields'.
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Handle atomic was left as unimplemented from 2013, remove the code till
this part will be developed.

Remove the dead code by simplifying SW completion logic which is supposed
to be the same for send and receive paths.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> # compile tested
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

With the introduction of SR-IOV LAG, checking whether LAG is active
is no longer good enough, since RoCE and SR-IOV LAG each entails
different behavior by both the core and infiniband drivers.

This patch introduces facilities to discern LAG type, in addition to
mlx5_lag_is_active(). These are implemented in such a way as to allow
more complex mode combinations in the future.
Signed-off-by: NAviv Heller <avivh@mellanox.com>
Reviewed-by: NRoi Dayan <roid@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

When in switchdev mode and the add function is called by the core
level driver, make sure we only register the callbacks, but don't
create the mlx5 IB device or initialize anything. With this change
all the IB devices in switchdev mode are created only once the load
callback is invoked by the e-switch core sub-module. This follows
the design paradigm under which the all the Eth representors must
be loaded before any of IB reprs is loaded.
Signed-off-by: NMark Bloch <markb@mellanox.com>
Acked-by: NOr Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Make all the required change to start use the ib_device_ops structure.
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Initialize ib_device_ops with the supported operations using
ib_set_device_ops().
Signed-off-by: NKamal Heib <kamalheib1@gmail.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

RDMA core layer already make sure port is valid, no need to check it here
again.

For the pkey validation this depends on commit b3ac5742fead ("RDMA/core:
Validate port number in query_pkey verb")
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

IB representors don't support creation of RAW ethernet QP flows.  Disable
them by reusing existing RDMA/core support macros.  We do it for both
creation and matcher because latter is not usable if no flow creation is
available.
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Remove duplicated include.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Report to the user 2x width over MAD interface.
Signed-off-by: NMichael Guralnik <michaelgur@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Report HDR speed when HDR is supported in CapabilityMask2 and the actual
speed is HDR.
Signed-off-by: NMichael Guralnik <michaelgur@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

CapabilityMask2 exists when IB_PORT_CAP_MASK2_SUP is set in the original
capability mask. In such cases, query its value and report it in query
port.
Signed-off-by: NMichael Guralnik <michaelgur@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add the new rates that were added to Infiniband spec as part of HDR and 2x
support.
Signed-off-by: NMichael Guralnik <michaelgur@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

GRE RFC defines a 32 bit key field. NVGRE RFC splits the 32 bit
key field to 24 bit VSID (gre_key_h) and 8 bit flow entropy (gre_key_l).

Define the two key parsing alternatives in a union, thus enabling both
access methods.
Signed-off-by: NOz Shlomo <ozsh@mellanox.com>
Reviewed-by: NEli Britstein <elibr@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Use the new helper that extracts the opcode
from a CQE (completion queue entry) structure.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>

Report packet based credit mode capability via the mlx5 DV interface.
Signed-off-by: NDanit Goldberg <danitg@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The device can support two credit modes, message based (default) and
packet based. In order to enable packet based mode, the QP should be
created with special flag that indicates this.

This patch adds support for the new DV QP creation flag that can be used
for RC QPs in order to change the credit mode.
Signed-off-by: NDanit Goldberg <danitg@mellanox.com>
Reviewed-by: NMajd Dibbiny <majd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Flow table can be passed as a DEVX object which is a valid destination in
an EGRESS flow. Fix the original code to allow that.

Fixes: a7ee18bd ("RDMA/mlx5: Allow creating a matcher for a NIC TX flow table")
Signed-off-by: NAlex Vesker <valex@mellanox.com>
Reviewed-by: NYishai Hadas <yishaih@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Blocks creating a DEVX UMEM with the non applicable access flags
as of ODP, MW_BIND, etc.

Specifically when an ODP flag is used below WARN call trace is issued.

[ 2510.404131] RIP: 0010:__mlx5_ib_populate_pas+0x207/0x220 [mlx5_ib]
...
[ 2510.404143] Call Trace:
[ 2510.404150]  ? __kmalloc_node+0x1b3/0x280
[ 2510.404156]  ? _uverbs_alloc+0x63/0x90 [ib_uverbs]
[ 2510.404158]  ? _uverbs_alloc+0x63/0x90 [ib_uverbs]
[ 2510.404162]  mlx5_ib_populate_pas+0x53/0x60 [mlx5_ib]
[ 2510.404167]  mlx5_ib_handler_MLX5_IB_METHOD_DEVX_UMEM_REG+0x273/0x3f0 [mlx5_ib]

Fixes: aeae9457 ("IB/mlx5: Add DEVX support for memory registration")
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Allows XRC usage from the verbs flow in a DEVX context.
As XRCD is some shared kernel resource between processes it should be
created with UID=0 to point on that.

As a result once XRC QP/SRQ are created they must be used as well with
UID=0 so that firmware will allow the XRCD usage.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Update the supported DEVX commands, it includes adding to the
query/modify command's list and to the encoding handling.

In addition, a valid range for general commands was added to be used for
future commands.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enforce DEVX privilege by firmware, this enables future device
functionality without the need to make driver changes unless a new
privilege type will be introduced.
Signed-off-by: NYishai Hadas <yishaih@mellanox.com>
Reviewed-by: NArtemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>