- 25 10月, 2011 13 次提交
-
-
由 Richard Cochran 提交于
If the PHY should disappear (for example, on an USB Ethernet MAC), then the driver would leak any undelivered time stamp packets. This commit fixes the issue by calling the appropriate functions to free any packets left in the transmit and receive queues. The driver first appeared in v3.0. Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
The previous commit enforces a new rule for handling the cloned packets for transmit time stamping. These packets must not be freed using any other function than skb_complete_tx_timestamp. This commit fixes the one and only driver using this API. The driver first appeared in v3.0. Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andreas Hofmeister 提交于
When hybrid mode is enabled (accept_ra == 2), the kernel also sees RAs generated locally. This is useful since it allows the kernel to auto-configure its own interface addresses. However, if 'accept_ra_defrtr' and/or 'accept_ra_rtr_pref' are set and the locally generated RAs announce the default route and/or other route information, the kernel happily inserts bogus routes with its own address as gateway. With this patch, adding routes from an RA will be skiped when the RAs source address matches any local address, just as if 'accept_ra_defrtr' and 'accept_ra_rtr_pref' were set to 0. Signed-off-by: NAndreas Hofmeister <andi@collax.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
If a frame cant be transmitted, it is silently discarded. Add a counter to report these errors to user. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
When the HW is in multi-channel mode based on the skew/IPL, there are 4 functions per port and so not enough resources to create multiple RX/TX rings for each function. Signed-off-by: NSuresh Reddy <suresh.reddy@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Multiple TXQ support is partially broken in BE2. It is fully supported BE3 onwards and in Lancer. Signed-off-by: NVasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
Currently the code for VF setup/teardown done by a PF (if_create, mac_add_config, link_status_query etc) is scattered; this patch refactors this code into be_vf_setup() and be_vf_clear(). The if_create/if_destroy/mac_addr_query cmds are now called after the MCCQ is created; so these cmds are now modified to use the MCCQ instead of MBOX. Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sathya Perla 提交于
When a card is reset due to EEH error recovery or due to a suspend, rx-mode config (promisc/mc) is not being sent to the FW. be_setup() is called in these flows and is the best place for such config/re-config cmds. Hence include rx-mode, vlan and flow-control config in be_setup(). Signed-off-by: NSathya Perla <sathya.perla@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Dan Siemon would like to add tunnelling support to cls_flow This preliminary patch introduces use of skb_header_pointer() to help this task, while avoiding skb head reallocation because of deep packet inspection. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gao feng 提交于
In func ipv4_dst_check,check_peer_pmtu should be called only when peer is updated. So,if the peer is not updated in ip_rt_frag_needed,we can not inc __rt_peer_genid. Signed-off-by: NGao feng <gaofeng@cn.fujitsu.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
-
由 Flavio Leitner 提交于
It was enabled by default and the messages guarded by the define are useful. Signed-off-by: NFlavio Leitner <fbl@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dirk Eibach 提交于
Since commit "74888760... dt/net: Eliminate users of of_platform_{,un}register_driver" there are two platform drivers named "mdio-gpio" registered. I renamed the of variant to "mdio-ofgpio". Signed-off-by: NDirk Eibach <eibach@gdsys.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 10月, 2011 10 次提交
-
-
由 Eric Dumazet 提交于
There is a long standing bug in linux tcp stack, about ACK messages sent on behalf of TIME_WAIT sockets. In the IP header of the ACK message, we choose to reflect TOS field of incoming message, and this might break some setups. Example of things that were broken : - Routing using TOS as a selector - Firewalls - Trafic classification / shaping We now remember in timewait structure the inet tos field and use it in ACK generation, and route lookup. Notes : - We still reflect incoming TOS in RST messages. - We could extend MuraliRaja Muniraju patch to report TOS value in netlink messages for TIME_WAIT sockets. - A patch is needed for IPv6 Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Renato Westphal noticed that since commit a2835763 "rtnetlink: handle rtnl_link netlink notifications manually" was merged we no longer send a netlink message when a networking device is moved from one network namespace to another. Fix this by adding the missing manual notification in dev_change_net_namespaces. Since all network devices that are processed by dev_change_net_namspaces are in the initialized state the complicated tests that guard the manual rtmsg_ifinfo calls in rollback_registered and register_netdevice are unnecessary and we can just perform a plain notification. Cc: stable@kernel.org Tested-by: NRenato Westphal <renatowestphal@gmail.com> Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Yan, Zheng 提交于
There is bug in commit 5e2b61f7(ipv4: Remove flowi from struct rtable). It makes xfrm4_fill_dst() modify wrong data structure. Signed-off-by: NZheng Yan <zheng.z.yan@intel.com> Reported-by: NKim Phillips <kim.phillips@freescale.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Clemens Buchacher 提交于
If the device is down during suspend/resume, interrupts are enabled without a registered interrupt handler, causing a storm of unhandled interrupts until the IRQ is disabled because "nobody cared". Instead, check that the device is up before touching it in the suspend/resume code. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=39112Helped-by: NAdrian Chadd <adrian@freebsd.org> Helped-by: NMohammed Shafi <shafi.wireless@gmail.com> Signed-off-by: NClemens Buchacher <drizzd@aon.at> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Flavio Leitner 提交于
The commit f39925db (ipv4: Cache learned redirect information in inetpeer.) removed some ICMP packet validations which are required by RFC 1122, section 3.2.2.2: ... A Redirect message SHOULD be silently discarded if the new gateway address it specifies is not on the same connected (sub-) net through which the Redirect arrived [INTRO:2, Appendix A], or if the source of the Redirect is not the current first-hop gateway for the specified destination (see Section 3.3.1). Signed-off-by: NFlavio Leitner <fbl@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Cochran 提交于
The pair of functions, * skb_clone_tx_timestamp() * skb_complete_tx_timestamp() were designed to allow timestamping in PHY devices. The first function, called during the MAC driver's hard_xmit method, identifies PTP protocol packets, clones them, and gives them to the PHY device driver. The PHY driver may hold onto the packet and deliver it at a later time using the second function, which adds the packet to the socket's error queue. As pointed out by Johannes, nothing prevents the socket from disappearing while the cloned packet is sitting in the PHY driver awaiting a timestamp. This patch fixes the issue by taking a reference on the socket for each such packet. In addition, the comments regarding the usage of these function are expanded to highlight the rule that PHY drivers must use skb_complete_tx_timestamp() to release the packet, in order to release the socket reference, too. These functions first appeared in v2.6.36. Reported-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NRichard Cochran <richard.cochran@omicron.at> Cc: <stable@vger.kernel.org> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Reviewed-by: NJohannes Berg <johannes@sipsolutions.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Now tcp_md5_hash_header() has a const tcphdr argument, we can add more const attributes to callers. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rick Jones 提交于
Add support for reporting ring sizes via ethtool -g to the virtio_net driver. Signed-off-by: NRick Jones <rick.jones2@hp.com> Acked-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
tcp_md5_hash_header() writes into skb header a temporary zero value, this might confuse other users of this area. Since tcphdr is small (20 bytes), copy it in a temporary variable and make the change in the copy. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
- 22 10月, 2011 4 次提交
-
-
由 Eric W. Biederman 提交于
When I made class_attr_bonding_matters per network namespace and dynamically allocated I overlooked the need for calling sysfs_attr_init. Oops. This fixes the following lockdep splat: [ 5.749651] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 5.749655] bonding: MII link monitoring set to 100 ms [ 5.749676] BUG: key f49a831c not in .data! [ 5.749677] ------------[ cut here ]------------ [ 5.749752] WARNING: at kernel/lockdep.c:2897 lockdep_init_map+0x1c3/0x460() [ 5.749809] Hardware name: ProLiant BL460c G1 [ 5.749862] Modules linked in: bonding(+) [ 5.749978] Pid: 3177, comm: modprobe Not tainted 3.1.0-rc9-02177-gf2d1a4e-dirty #1157 [ 5.750066] Call Trace: [ 5.750120] [<c1352c2f>] ? printk+0x18/0x21 [ 5.750176] [<c103112d>] warn_slowpath_common+0x6d/0xa0 [ 5.750231] [<c1060133>] ? lockdep_init_map+0x1c3/0x460 [ 5.750287] [<c1060133>] ? lockdep_init_map+0x1c3/0x460 [ 5.750342] [<c103117d>] warn_slowpath_null+0x1d/0x20 [ 5.750398] [<c1060133>] lockdep_init_map+0x1c3/0x460 [ 5.750453] [<c1355ddd>] ? _raw_spin_unlock+0x1d/0x20 [ 5.750510] [<c11255c8>] ? sysfs_new_dirent+0x68/0x110 [ 5.750565] [<c1124d4b>] sysfs_add_file_mode+0x8b/0xe0 [ 5.750621] [<c1124db3>] sysfs_add_file+0x13/0x20 [ 5.750675] [<c1124e7c>] sysfs_create_file+0x1c/0x20 [ 5.750737] [<c1208f09>] class_create_file+0x19/0x20 [ 5.750794] [<c12c186f>] netdev_class_create_file+0xf/0x20 [ 5.750853] [<f85deaf4>] bond_create_sysfs+0x44/0x90 [bonding] [ 5.750911] [<f8410947>] ? bond_create_proc_dir+0x1e/0x3e [bonding] [ 5.750970] [<f841007e>] bond_net_init+0x7e/0x87 [bonding] [ 5.751026] [<f8410000>] ? 0xf840ffff [ 5.751080] [<c12abc7a>] ops_init.clone.4+0xba/0x100 [ 5.751135] [<c12abdb2>] ? register_pernet_subsys+0x12/0x30 [ 5.751191] [<c12abd03>] register_pernet_operations.clone.3+0x43/0x80 [ 5.751249] [<c12abdb9>] register_pernet_subsys+0x19/0x30 [ 5.751306] [<f84108b9>] bonding_init+0x832/0x8a2 [bonding] [ 5.751363] [<c10011f0>] do_one_initcall+0x30/0x160 [ 5.751420] [<f8410087>] ? bond_net_init+0x87/0x87 [bonding] [ 5.751477] [<c106d5cf>] sys_init_module+0xef/0x1890 [ 5.751533] [<c1356490>] sysenter_do_call+0x12/0x36 [ 5.751588] ---[ end trace 89f492d83a7f5006 ]--- Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Reported-by: NEric Dumazet <eric.dumazet@gmail.com> Tested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
Ari got kernel panics using tg3 NIC, and bisected to 2669069a "tg3: enable transmit time stamping." This is because tigon3_dma_hwbug_workaround() might alloc a new skb and free the original. We panic when skb_tx_timestamp() is called on freed skb. Reported-by: NAri Savolainen <ari.m.savolainen@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
INET_ECN_encapsulate() is better understood if we can read the official statement. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maciej Żenczykowski 提交于
Signed-off-by: NMaciej Żenczykowski <maze@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 21 10月, 2011 13 次提交
-
-
由 Carolyn Wyborny 提交于
Due to a hardware problem, writes to the VFTA register can theoretically fail. Although the likelihood of this is very low. This patch adds a shadow vfta in the adapter struct for reading and adds new write functions for these devices to work around the problem. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
This patch moves the DMA Coalescing feature initialization code from igb_reset to a new function and replaces it with a call to the new function. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: NAaron Brown <aaron.f.brown@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Carolyn Wyborny 提交于
In 82580 and later devices, the alternate MAC address feature is completely handled by the option ROM and software does not handle it anymore. This patch changes the check_alt_mac_addr function to exit immediately if device is 82580 or later. Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Williams, Mitch A 提交于
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Williams, Mitch A 提交于
Update adapter identification strings to properly indicate i350 VF devices in the VF driver. Change the driver ID string to remove 82576-specific wording. Update copyright date. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NSibai Li <sibai.li@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Eric Dumazet 提交于
Adding const qualifiers to pointers can ease code review, and spot some bugs. It might allow compiler to optimize code further. For example, is it legal to temporary write a null cksum into tcphdr in tcp_md5_hash_header() ? I am afraid a sniffer could catch the temporary null value... Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mihai Maruseac 提交于
Instead of using the dev->next chain and trying to resync at each call to dev_seq_start, use the name hash, keeping the bucket and the offset in seq->private field. Tests revealed the following results for ifconfig > /dev/null * 1000 interfaces: * 0.114s without patch * 0.089s with patch * 3000 interfaces: * 0.489s without patch * 0.110s with patch * 5000 interfaces: * 1.363s without patch * 0.250s with patch * 128000 interfaces (other setup): * ~100s without patch * ~30s with patch Signed-off-by: NMihai Maruseac <mmaruseac@ixiacom.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
On systems that create and delete lots of dynamic devices the 31bit linux ifindex fails to fit in the 16bit macvtap minor, resulting in unusable macvtap devices. I have systems running automated tests that that hit this condition in just a few days. Use a linux idr allocator to track which mavtap minor numbers are available and and to track the association between macvtap minor numbers and macvtap network devices. Remove the unnecessary unneccessary check to see if the network device we have found is indeed a macvtap device. With macvtap specific data structures it is impossible to find any other kind of networking device. Increase the macvtap minor range from 65536 to the full 20 bits that is supported by linux device numbers. It doesn't solve the original problem but there is no penalty for a larger minor device range. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
Place macvlan_common_newlink at the end of macvtap_newlink because failing in newlink after registering your network device is not supported. Move device_create into a netdevice creation notifier. The network device notifier is the only hook that is called after the network device has been registered with the device layer and before register_network_device returns success. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
To avoid leaking packets in the receive queue. Add a socket destructor that will run whenever destroy a macvtap socket. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
To see if it is appropriate to enable the macvtap zero copy feature don't test the lowerdev network device flags. Instead test the macvtap network device flags which are a direct copy of the lowerdev flags. This is important because nothing holds a reference to lowerdev and on a very bad day we lowerdev could be a pointer to stale memory. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric W. Biederman 提交于
There is a small window in macvtap_open between looking up a networking device and calling macvtap_set_queue in which macvtap_del_queues called from macvtap_dellink. After calling macvtap_del_queues it is totally incorrect to allow macvtap_set_queue to proceed so prevent success by reporting that all of the available queues are in use. Signed-off-by: NEric W. Biederman <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
We must account in skb->truesize, the size of the fragments, not the used part of them. Doing this work is important to avoid unexpected OOM situations. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: "Michael S. Tsirkin" <mst@redhat.com> CC: virtualization@lists.linux-foundation.org CC: Krishna Kumar <krkumar2@in.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-