Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 30 3月, 2010 1 次提交
  3. 03 3月, 2010 1 次提交
  5. 06 11月, 2009 1 次提交
  7. 20 9月, 2009 1 次提交
  9. 20 8月, 2009 1 次提交
    • J
      HID: support larger reports than 64 bytes in hiddev · affbb8c6
      由 Jiri Kosina 提交于 
      hiddev userspace driver uses a rignbuffer to store the parsed usages
that should be returned through read(). This buffer is 64 bytes long,
which is sufficient for queueing single USB 1.0 low-speed report, which
is of maximum size 48 bytes.

There are however USB HID devices which are full-speed USB devices, and
therefore they are free to produce reports 64 bytes long. This is correctly
handled by HID core, but read() on hiddev node gets stuck forever, because
the ring buffer loops infinitely (as it is exactly 64 bytes long as well),
never advancing the buffer pointer.

Plus, the core driver is ready to handle highspeed devices, so we should be
able to handle reports from such devices in the hiddev driver as well, which
means we need larger ringbuffer.
Reported-by: NMichael Zeisel <michael.zeisel@philips.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      affbb8c6
  11. 22 6月, 2009 1 次提交
  13. 16 6月, 2009 1 次提交
  15. 30 3月, 2009 1 次提交
    • O
      HID: fix race between usb_register_dev() and hiddev_open() · e43bd67d
      由 Oliver Neukum 提交于 
      upon further thought this code is still racy.

	retval = usb_register_dev(usbhid->intf, &hiddev_class);

here you open a window during which open can happen

	if (retval) {
		err_hid("Not able to get a minor for this device.");
		hid->hiddev = NULL;
		kfree(hiddev);
		return -1;
	} else {
		hid->minor = usbhid->intf->minor;
		hiddev_table[usbhid->intf->minor - HIDDEV_MINOR_BASE] = hiddev;

and will fail because hiddev_table hasn't been updated

The obvious fix of using a mutex to guard hiddev_table doesn't work because
usb_open() and usb_register_dev() take minor_rwsem and we'd have an AB-BA
deadlock. We need a lock usb_open() also takes in the right order and that leaves
only one option, BKL. I don't like it but I see no alternative.

Once the usb_open() implements something better than lock_kernel(), we could also
do so.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      e43bd67d
  17. 26 3月, 2009 1 次提交
    • O
      HID: autosuspend support for USB HID · 0361a28d
      由 Oliver Neukum 提交于 
      This uses the USB busy mechanism for aggessive autosuspend of USB
HID devices. It autosuspends all opened devices supporting remote wakeup
after a timeout unless

- output is being done to the device
- a key is being held down (remote wakeup isn't triggered upon key release)
- LED(s) are lit
- hiddev is opened

As in the current driver closed devices will be autosuspended even if they
don't support remote wakeup.

The patch is quite large because output to devices is done in hard interrupt
context meaning a lot a queuing and locking had to be touched. The LED stuff
has been solved by means of a simple counter. Additions to the generic HID code
could be avoided. In addition it now covers hidraw. It contains an embryonic
version of an API to let the generic HID code tell the lower levels which
capabilities with respect to power management are needed.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      0361a28d
  19. 16 3月, 2009 1 次提交
    • J
      Rationalize fasync return values · 60aa4924
      由 Jonathan Corbet 提交于 
      Most fasync implementations do something like:

     return fasync_helper(...);

But fasync_helper() will return a positive value at times - a feature used
in at least one place.  Thus, a number of other drivers do:

     err = fasync_helper(...);
     if (err < 0)
             return err;
     return 0;

In the interests of consistency and more concise code, it makes sense to
map positive return values onto zero where ->fasync() is called.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>
      60aa4924
  21. 11 3月, 2009 2 次提交
    • J
      HID: fix waitqueue usage in hiddev · 96fe2ab8
      由 Johannes Weiner 提交于 
      DECLARE_WAITQUEUE doesn't initialize the wait descriptor's task_list
to 'empty' but to zero.

prepare_to_wait() will not enqueue the descriptor to the waitqueue and
finish_wait() will do list_del_init() on a list head that contains
NULL pointers, which oopses.

This was introduced by 07903407 "HID: hiddev cleanup -- handle all
error conditions properly".

The prior code used an unconditional add_to_waitqueue() which didn't
care about the wait descriptor's list head and enqueued the thing
unconditionally.

The new code uses prepare_to_wait() which DOES check the prior list
state, so use DEFINE_WAIT instead.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      96fe2ab8
    • J
      HID: fix incorrect free in hiddev · 48e7a3c9
      由 Johannes Weiner 提交于 
      If hiddev_open() fails, it wrongly frees the shared hiddev structure
kept in hiddev_table instead of the hiddev_list structure allocated
for the opened file descriptor.  Existing references to this structure
will then accessed free memory.

This was introduced by 07903407 "HID: hiddev cleanup -- handle all
error conditions properly".
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Oliver Neukum <oliver@neukum.name>
Cc: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      48e7a3c9
  23. 29 1月, 2009 1 次提交
  25. 08 1月, 2009 1 次提交
  27. 04 1月, 2009 1 次提交
    • O
      HID: hiddev cleanup -- handle all error conditions properly · 07903407
      由 Oliver Neukum 提交于 
      This is a cleanup of hiddev and fixes the following issues:

- thread safety by locking in read & ioctl, introducing a per device mutex
- race between ioctl and disconnect, introducing a flag and locking
  in form of a per low level device mutex
- race between open and other methods, making sure only successfully
  opened devices are put on the list, changing order of events
- range checking both upper and lower limits of the minor range
- make sure further calls to open fail for unplugged devices even if
  the device still has opened files
- error checking for low level open
- possible loss of wakeup events, using standard waiting macros
- race in initialisation by moving registration after full initialisation
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      07903407
  29. 02 11月, 2008 1 次提交
    • A
      saner FASYNC handling on file close · 233e70f4
      由 Al Viro 提交于 
      As it is, all instances of ->release() for files that have ->fasync()
need to remember to evict file from fasync lists; forgetting that
creates a hole and we actually have a bunch that *does* forget.

So let's keep our lives simple - let __fput() check FASYNC in
file->f_flags and call ->fasync() there if it's been set.  And lose that
crap in ->release() instances - leaving it there is still valid, but we
don't have to bother anymore.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      233e70f4
  31. 23 10月, 2008 1 次提交
  33. 15 10月, 2008 1 次提交
  35. 23 7月, 2008 3 次提交
  37. 22 4月, 2008 1 次提交
  39. 31 10月, 2007 1 次提交
    • J
      HID: hiddev - fix compiler warning · d624284b
      由 Jiri Kosina 提交于 
      drivers/hid/usbhid/hiddev.c: In function 'hiddev_compat_ioctl':
drivers/hid/usbhid/hiddev.c:746: warning: passing argument 4 of 'hiddev_ioctl' makes
integer from pointer without a cast

Add cast to hiddev_compat_ioctl()
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      d624284b
  41. 14 10月, 2007 1 次提交
  43. 09 7月, 2007 1 次提交
    • J
      HID: make debugging output runtime-configurable · 58037eb9
      由 Jiri Kosina 提交于 
      There have been many reports recently about broken HID devices, the
diagnosis of which required users to recompile their kernels in order
to be able to provide debugging output needed for coding a quirk for
a particular device.

This patch makes CONFIG_HID_DEBUG default y if !EMBEDDED and makes it
possible to control debugging output produced by HID code by supplying
'debug=1' module parameter.
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      58037eb9
  45. 10 5月, 2007 1 次提交
  47. 11 4月, 2007 1 次提交
  49. 22 1月, 2007 1 次提交
    • A
      HID: put usb_interface instead of usb_device into hid->dev to fix udevinfo breakage · be820975
      由 Anssi Hannula 提交于 
      The commit 4916b3a5 introduced a
hid regression between 2.6.19 and 2.6.20-rc1. The device put in
input_dev->cdev is now of type usb_device instead of usb_interface.

Before:
> # readlink -f /sys/class/input/input6/event4/device
> /sys/devices/pci0000:00/0000:00:10.0/usb2/2-1/2-1:1.1
After:
> # readlink -f /sys/class/input/input3/event3/device
> /sys/devices/pci0000:00/0000:00:10.0/usb1/1-1

This causes breakage:
> # udevinfo -q all -n /dev/input/event3
> P: /class/input/input3/event3
> N: input/event3
> S: input/by-path/pci-1-1--event-
> E: ID_SERIAL=noserial
> E: ID_PATH=pci-1-1-

No ID_MODEL, ID_VENDOR, ID_REVISION, ID_TYPE etc etc.

Fix this by assigning the intf->dev into hid->dev, and fixing
all the users.
Signed-off-by: NAnssi Hannula <anssi.hannula@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      be820975
  51. 09 12月, 2006 4 次提交
  53. 05 10月, 2006 1 次提交
    • D
      IRQ: Maintain regs pointer globally rather than passing to IRQ handlers · 7d12e780
      由 David Howells 提交于 
      Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
      7d12e780
  55. 28 9月, 2006 1 次提交
  57. 19 7月, 2006 1 次提交
  59. 01 7月, 2006 1 次提交
  61. 22 5月, 2006 1 次提交
  63. 21 3月, 2006 1 次提交
  65. 01 2月, 2006 1 次提交
  67. 31 1月, 2006 1 次提交