This patch enables the IBS facility when a single VCPU is running.
The facility is dynamically turned on/off as soon as other VCPUs
enter/leave the stopped state.

When this facility is operating, some instructions can be executed
faster for single-cpu guests.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch adds support to debug the guest using the PER facility on s390.
Single-stepping, hardware breakpoints and hardware watchpoints are supported. In
order to use the PER facility of the guest without it noticing it, the control
registers of the guest have to be patched and access to them has to be
intercepted(stctl, stctg, lctl, lctlg).

All PER program interrupts have to be intercepted and only the relevant PER
interrupts for the guest have to be given back. Special care has to be taken
about repeated exits on the same hardware breakpoint. The intervention of the
host in the guests PER configuration is not fully transparent. PER instruction
nullification can not be used by the guest and too many storage alteration
events may be reported to the guest (if it is activated for special address
ranges only) when the host concurrently debugging it.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Introduce the methods to emulate the stctl and stctg instruction. Added tracing
code.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When a program interrupt was to be delivered until now, no program interrupt
parameters were stored in the low-core of the target vcpu.

This patch enables the delivery of those program interrupt parameters, takes
care of concurrent PER events which can be injected in addition to any program
interrupt and uses the correct instruction length code (depending on the
interception code) for the injection of program interrupts.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Whenever a program interrupt is intercepted, some parameters are stored in the
sie control block. These parameters have to be extracted in order to be
reinjected correctly. This patch also takes care of intercepted PER events which
can occurr in addition to any program interrupt.
Signed-off-by: NDavid Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Add a 'struct kvm_s390_pgm_info pgm' member to kvm_vcpu_arch. This
structure will be used if during instruction emulation in the context
of a vcpu exception data needs to be stored somewhere.

Also add a helper function kvm_s390_inject_prog_cond() which can inject
vcpu's last exception if needed.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Add a new data structure and function that allows to inject
all kinds of interrupt as defined in the PoP
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

When userspace reset the guest without notifying kvm, the CMMA state
of the pages might be unused, resulting in guest data corruption.
To avoid this, CMMA must be enabled only if userspace understands
the implications.

CMMA must be enabled before vCPU creation. It can't be switched off
once enabled.  All subsequently created vCPUs will be enabled for
CMMA according to the CMMA state of the VM.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
[remove now unnecessary calls to page_table_reset_pgste]

The first invocation of storage key operations on a given cpu will be intercepted.

On these intercepts we will enable storage keys for the guest and remove the
previously added intercepts.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

We need BITS_TO_LONGS, not sizeof(long) to calculate
the correct size.

idle_mask is a bitmask, each bit representing the state
of a cpu. The desired outcome is an array of unsigned long
fields that can fit KVM_MAX_VCPUS bits. We should not use
sizeof(long) which returnes the size in bytes, but BITS_TO_LONGS
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Introduce a new interrupt class for s390 adapter interrupts and enable
irqfds for s390.

This is depending on a new s390 specific vm capability, KVM_CAP_S390_IRQCHIP,
that needs to be enabled by userspace.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

Add a new interface to register/deregister sources of adapter interrupts
identified by an unique id via the flic. Adapters may also be maskable
and carry a list of pinned pages.

These adapters will be used by irq routing later.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>

We can use kvm_get_vcpu() now and don't need the
local_int array in the floating_int struct anymore.
This also means we don't have to hold the float_int.lock
in some places.
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

commit d208c79d (KVM: s390: Enable
the LPP facility for guests) enabled the LPP instruction for guests.
We should expose the program parameter as a pseudo register for
migration/reset etc. Lets also reset this value on initial CPU
reset.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: NJason J. Herne <jjherne@linux.vnet.ibm.com>

This patch enables Collaborative Memory Management (CMM) for kvm
on s390. CMM allows the guest to inform the host about page usage
(see arch/s390/mm/cmm.c). The host uses this information to avoid
swapping in unused pages in the page fault handler. Further, a CPU
provided list of unused invalid pages is processed to reclaim swap
space of not yet accessed unused pages.

[ Martin Schwidefsky: patch reordering and cleanup ]
Signed-off-by: NKonstantin Weitz <konstantin.weitz@gmail.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This patch enables async page faults for s390 kvm guests.
It provides the userspace API to enable and disable_wait this feature.
The disable_wait will enforce that the feature is off by waiting on it.
Also it includes the diagnose code, called by the guest to enable async page faults.

The async page faults will use an already existing guest interface for this
purpose, as described in "CP Programming Services (SC24-6084)".
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Userspace can flood the kernel with interrupts as of now, so let's
limit the number of pending floating interrupts injected via either
the floating interrupt controller or the KVM_S390_INTERRUPT ioctl.

We can have up to 4*64k pending subchannels + 8 adapter interrupts,
as well as up to ASYNC_PF_PER_VCPU*KVM_MAX_VCPUS pfault done interrupts.
There are also sclp and machine checks. This gives us
(4*65536+8+64*64+1+1) = 266250 interrupts.
Suggested-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch adds a floating irq controller as a kvm_device.
It will be necessary for migration of floating interrupts as well
as for hardening the reset code by allowing user space to explicitly
remove all pending floating interrupts.
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

With the currently available struct kvm_s390_interrupt it is not possible to
inject every kind of interrupt as defined in the z/Architecture. Add
additional interruption parameters to the structures and move it to kvm.h
Signed-off-by: NJens Freimann <jfrei@linux.vnet.ibm.com>
Reviewed-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

This patch enables transactional execution for KVM guests
on s390 systems zec12 or later.

We rework the allocation of the page containing the sie_block
to also back the Interception Transaction Diagnostic Block.
If available the TE facilities will be enabled.

Setting bit 73 and 50 in vfacilities bitmask reveals the HW
facilities Transactional Memory and Constraint Transactional
Memory respectively to the KVM guest.

Furthermore, the patch restores the Program-Interruption TDB
from the Interception TDB in case a program interception has
occurred and the ITDB has a valid format.
Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>

Now when the main kvm code relying on these defines has been moved to
the x86 specific part of the world, we can get rid of these.
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

The need for SIE_INTERCEPT_RERUNVCPU has been removed long ago already,
with the following commit:
	f7850c92
	[S390] remove kvm mmu reload on s390
Since the remainders are dead code, they are now removed by this patch.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Current common code uses PAGE_OFFSET to indicate a bad host virtual address.
As this check won't work on architectures that don't map kernel and user memory
into the same address space (e.g. s390), such architectures can now provide
their own KVM_HVA_ERR_BAD defines.
Signed-off-by: NDominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Renamed the PGM_PRIVILEGED_OPERATION define to PGM_PRIVILEGED_OP since this
define was way longer than the other PGM_* defines and caused the code often
to exceed the 80 columns limit when not split to multiple lines.
Signed-off-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch is based on an original patch of David Hildenbrand.

The perf core implementation calls architecture specific code in order
to ask for specific information for a particular sample:

perf_instruction_pointer()
When perf core code asks for the instruction pointer, architecture
specific code must detect if a KVM guest was running when the sample
was taken. A sample can be associated with a  KVM guest when the PSW
supervisor state bit is set and the PSW instruction pointer part
contains the address of 'sie_exit'.
A KVM guest's instruction pointer information is then retrieved via
gpsw entry pointed to by the sie control-block.

perf_misc_flags()
perf code code calls this function in order to associate the kernel
vs. user state infomation with a particular sample. Architecture
specific code must also first detectif a KVM guest was running
at the time the sample was taken.
Signed-off-by: NHeinz Graalfs <graalfs@linux.vnet.ibm.com>
Reviewed-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Lets use the common waitqueue for kvm cpus on s390. By itself it is
just a cleanup, but it should also improve the accuracy of diag 0x44
which is implemented via kvm_vcpu_on_spin. kvm_vcpu_on_spin has
an explicit check for waiting on the waitqueue to optimize the
yielding.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This patch enables kvm to give large pages to the guest. The heavy
lifting is done by the hardware, the host only has to take care
of the PFMF instruction, which is also part of EDAT-1.

We also support the non-quiescing key setting facility if the host
supports it, to behave similar to the interpretation of sske.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Lets provide functions to prevent KVM from reentering SIE and
to kick cpus out of SIE. We cannot use the common kvm_vcpu_kick code,
since we need to kick out guests in places that hold architecture
specific locks (e.g. pgste lock) which might be necessary on the
other cpus - so no waiting possible.

So lets provide a bit in a private field of the sie control block
that acts as a gate keeper, after we claimed we are in SIE.
Please note that we do not reuse prog0c, since we want to access
that bit without atomic ops.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Lets track in a private bit if the sie control block is active.
We want to track this as closely as possible, so we also have to
instrument the interrupt and program check handler. Lets use the
existing HANDLE_SIE_INTERCEPT macro.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

Add a new capability, KVM_CAP_S390_CSS_SUPPORT, which will pass
intercepts for channel I/O instructions to userspace. Only I/O
instructions interacting with I/O interrupts need to be handled
in-kernel:

- TEST PENDING INTERRUPTION (tpi) dequeues and stores pending
  interrupts entirely in-kernel.
- TEST SUBCHANNEL (tsch) dequeues pending interrupts in-kernel
  and exits via KVM_EXIT_S390_TSCH to userspace for subchannel-
  related processing.
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add support for injecting machine checks (only repressible
conditions for now).

This is a bit more involved than I/O interrupts, for these reasons:

- Machine checks come in both floating and cpu varieties.
- We don't have a bit for machine checks enabling, but have to use
  a roundabout approach with trapping PSW changing instructions and
  watching for opened machine checks.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Add support for handling I/O interrupts (standard, subchannel-related
ones and rudimentary adapter interrupts).

The subchannel-identifying parameters are encoded into the interrupt
type.

I/O interrupts are floating, so they can't be injected on a specific
vcpu.
Reviewed-by: NAlexander Graf <agraf@suse.de>
Reviewed-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Seems like everyone copied x86 and defined 4 private memory slots
that never actually get used.  Even x86 only uses 3 of the 4.  These
aren't exposed so there's no need to add padding.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

It's easy to confuse KVM_MEMORY_SLOTS and KVM_MEM_SLOTS_NUM.  One is
the user accessible slots and the other is user + private.  Make this
more obvious.
Reviewed-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Remove the file name from the comment at top of many files. In most
cases the file name was wrong anyway, so it's rather pointless.

Also unify the IBM copyright statement. We did have a lot of sightly
different statements and wanted to change them one after another
whenever a file gets touched. However that never happened. Instead
people start to take the old/"wrong" statements to use as a template
for new files.
So unify all of them in one go.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>

This patch implements the directed yield hypercall found on other
System z hypervisors. It delegates execution time to the virtual cpu
specified in the instruction's parameter.

Useful to avoid long spinlock waits in the guest.

Christian Borntraeger: moved common code in virt/kvm/
Signed-off-by: NKonstantin Weitz <WEITZKON@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

Some members of kvm_memory_slot are not used by every architecture.

This patch is the first step to make this difference clear by
introducing kvm_memory_slot::arch;  lpage_info is moved into it.
Signed-off-by: NTakuya Yoshikawa <yoshikawa.takuya@oss.ntt.co.jp>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds the access registers to the kvm_run structure.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>

This patch adds the general purpose registers to the kvm_run structure.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NAvi Kivity <avi@redhat.com>