Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

AES module was initialized for every DMA transaction.
That is redundant.
Now it is initialized once per request.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Key and IV should always be set before AES operation.
So no need to check if it has changed or not.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Previous version had not error handling.
Request could remain uncompleted.

Also in the case of DMA error, FLAGS_INIT is unset
and accelerator will be initialized again.

Buffer size allignment is checked.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Submitting request involved double locking for enqueuing and
dequeuing. Now it is done under the same lock.

FLAGS_BUSY is now handled under the same lock.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

DMA parameters for constant data were initialized during driver probe().
It seems that those settings sometimes are lost when devices goes to off mode.
This patch makes DMA initialization just before use.
It solves off mode problems.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If scatterlist have more than one entry, current driver uses
aligned buffer to copy data to to accelerator to tackle possible
issues with DMA and SHA buffer alignment.

This commit adds more intelligence to verify SG alignment and
possibility to use DMA directly on the data without using copy
buffer.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

bufcnt is 0 if it was no update requests before,
which is exact meaning of FLAGS_FIRST.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Hash-in-progress is now stored in hw format.
Only on final call, hash is converted to correct format.
Speedup copy procedure and will allow to use OMAP burst mode.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

According to the Herbert Xu, client may not always call
crypto_ahash_final().

In the case of error in hash calculation resources will be
automatically cleaned up.

But if no hash calculation error happens and client will not call
crypto_ahash_final() at all, then internal buffer will not be freed,
and clocks will not be disabled.

This patch provides support for atomic crypto_ahash_update() call.
Clocks are now enabled and disabled per update request.

Data buffer is now allocated as a part of request context.
Client is obligated to free it with crypto_free_ahash().
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Locking for queuing and dequeuing is combined.
test_and_set_bit() is also replaced with checking under dd->lock.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Introduces DMA error handling.

DMA error is returned as a result code of the hash request.
Clients needs to handle error codes and may repeat hash calculation attempt.

Also in the case of DMA error, SHAM module is set to be re-initialized again.
It significantly improves stability against possible HW failures.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

DMA parameters for constant data were initialized during driver probe().
It seems that those settings sometimes are lost when devices goes to off mode.
This patch makes DMA initialization just before use.
It solves off mode problems.

Fixes: NB#202786 - Aegis & SHA1 block off mode changes
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Currently driver storred digest results in req->results
provided by the client. But some clients do not set it
until final() call. It leads to crash.
Changed to use internal buffer to store temporary digest results.
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Use the new {max,min}3 macros to save some cycles and bytes on the stack.
This patch substitutes trivial nested macros with their counterpart.
Signed-off-by: NHagen Paul Pfeifer <hagen@jauu.net>
Cc: Joe Perches <joe@perches.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Roland Dreier <rolandd@cisco.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Changed <module>-objs to <module>-y in Makefile.
Signed-off-by: NTracey Dent <tdent48227@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Make hifn_795x::hifn_remove() call cancel_delayed_work_sync() instead
of calling cancel_delayed_work() followed by flush_scheduled_work().

This is to prepare for the deprecation and removal of
flush_scheduled_work().
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

WARNING: kfree(NULL) is safe this check is probably not required
+		if (priv->chan[i].fifo)
+			kfree(priv->chan[i].fifo);
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

drivers/crypto/talitos.c: In function 'talitos_probe':
drivers/crypto/talitos.c:2363: warning: 'alg' may be used uninitialized in this function
drivers/crypto/talitos.c:2363: note: 'alg' was declared here
Signed-off-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Reported-by: NDennis Gilmore <dennis@ausil.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

DMA is set to use burst mode also for source channel. It should
descrease memory bandwidth needs.

DMA synchronization is set to use prefetch mechanism. SHAM block is behind
L4 bus and it doesn't have fifo. SHAM block is stalling as long as the new
data is available. It takes time to fetch data from memory and transfer it
via L4 bus. With prefetch enabled, data is waiting in DMA fifo and SHAM block
receives new data block faster.
This increases SHA processing speed up to 30 percent depending on the
bus / memory load.
Signed-off-by: NSamu Onkalo <samu.p.onkalo@nokia.com>
Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NDmitry Kasatkin <dmitry.kasatkin@nokia.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

warning: (ZCRYPT && CRYPTO && CRYPTO_HW && S390 && ZCRYPT=y) selects
ZCRYPT_MONOLITHIC which has unmet direct dependencies (ZCRYPT=m)

ZCRYPT_MONOLITHIC should not depend on ZCRYPT="m" when it gets
selected if ZCRYPT="y".
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Commit id 1636f8ac (sparc/of: Move
of_device fields into struct pdev_archdata) missed fixing up the
n2_core.c and greth.c drivers.  This patch makes the required changes.
Reported-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

of_device is just an alias for platform_device, so remove it entirely.  Also
replace to_of_device() with to_platform_device() and update comment blocks.

This patch was initially generated from the following semantic patch, and then
edited by hand to pick up the bits that coccinelle didn't catch.

@@
@@
-struct of_device
+struct platform_device
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Reviewed-by: NDavid S. Miller <davem@davemloft.net>

Both of_bus_type and of_platform_bus_type are just #define aliases
for the platform bus.  This patch removes all references to them and
switches to the of_register_platform_driver()/of_unregister_platform_driver()
API for registering.

Subsequent patches will convert each user of of_register_platform_driver()
into plain platform_drivers without the of_platform_driver shim.  At which
point the of_register_platform_driver()/of_unregister_platform_driver()
functions can be removed.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NDavid S. Miller <davem@davemloft.net>

In function sg_copy_end_to_buffer, too much data
is copied when a segment in the scatterlist
has .length greater than the requested copy length.

This patch adds the limit checks to fix this bug of over copying,
which affected only the ahash algorithms.
Signed-off-by: NLee Nipper <lee.nipper@gmail.com>
Acked-by: NKim Phillips <kim.phillips@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts pci_table entries, where .subvendor=PCI_ANY_ID and
.subdevice=PCI_ANY_ID, .class=0 and .class_mask=0, to use the
PCI_VDEVICE macro, and thus improves readability.
Signed-off-by: NPeter Huewe <peterhuewe@gmx.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The below patch gets rid of an unused variable ctx reported by
GCC when building the kernel.
  CC [M]  drivers/crypto/hifn_795x.o
drivers/crypto/hifn_795x.c: In function 'hifn_flush':
drivers/crypto/hifn_795x.c:2021:23: warning: variable 'ctx' set but not used
drivers/crypto/hifn_795x.c: In function 'hifn_process_queue':
drivers/crypto/hifn_795x.c:2142:23: warning: variable 'ctx' set but not used
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Correct ahash_process_req() to properly handle cases
where the total hash amount is a multiple of the blocksize.
The SEC must have some data to hash during the very last
descriptor operation; so up to one whole blocksize
of data is buffered until the final hash.
Signed-off-by: NLee Nipper <lee.nipper@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fixes build error caused by the OF device_node
pointer being moved into struct device
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Fixes build error caused by the OF device_node
pointer being moved into struct device
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Fixes the following on IXP425 little-endian:

NPE-C: firmware functionality 0x5, revision 0x2:1
alg: skcipher: Test 1 failed on encryption for ecb(des)-ixp4xx
00000000: 01 23 45 67 89 ab cd e7
alg: skcipher: Test 1 failed on encryption for ecb(des3_ede)-ixp4xx
00000000: 73 6f 6d 65 64 61 74 61
alg: skcipher: Test 1 failed on encryption for ecb(aes)-ixp4xx
00000000: 00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff
Signed-off-by: NKrzysztof Hałasa <khc@pm.waw.pl>
Acked-by: NChristian Hohnstaedt <chohnstaedt@innominate.com>

The error handling in mv_probe() was a bit messed up.  There were some 
gotos to the wrong labels so it ended up releasing stuff that that hadn't
been aquired and not releasing stuff that was meant to be released.  I
shuffled it around a bit to fix it and make it clearer.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove unused #include <linux/version.h>('s) in
  drivers/crypto/omap-sham.c
Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

One note is that, unlike with non-HMAC hashes, we can't support
hmac(sha224) using the HMAC_SHA256 opcode.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All of the ahash ->digest() ops do essentially the same thing, just
using different parameters.

So instead, have a single n2_hash_async_digest() and use an
n2_ahash_alg container that provides the parameters.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>