- 30 11月, 2016 4 次提交
-
-
由 Marek Szyprowski 提交于
Move clock disabling before turning power off. This will enable later to add calls to clk_prepare/unprepare in the s5p_mfc_power_off() function to avoid keeping clocks prepared all the time when driver is bound. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Marek Szyprowski 提交于
The maximum rate of special clock depends on SoC variant and should be set in device tree via assigned-clock-rates property, so remove the code which forces special clock to 200MHz. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Marek Szyprowski 提交于
Some applications don't check error codes from QBUF/DQBUF ioctls, so don't spam kernel log with errors if they fall into endless loop trying to queue next buffer after a failure. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Douglas Anderson 提交于
We do video allocation all the time and we need it to be fast. Plus TLB efficiency isn't terribly important for video. That means we want to set DMA_ATTR_ALLOC_SINGLE_PAGES. See also the previous change (commit 14d3ae2e "ARM: dma-mapping: Use DMA_ATTR_ALLOC_SINGLE_PAGES hint to optimize allocation"). [m.szyprowski: rebased patch onto v4.9-rc1 and adapted changes to latest videbuf2 changes, this simplifies code changes to only set proper dma attribute flag and comment the reason for it, added commit id of arch/arm/mm patch] Signed-off-by: NDouglas Anderson <dianders@chromium.org> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 29 11月, 2016 4 次提交
-
-
由 Ricardo Ribalda 提交于
HSV formats were missing the color encoding, which leads to an invalid ycbcr_enc value during get_fmt and try_fmt. Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Ricardo Ribalda 提交于
Zero is not a valid value for hsv_enc. Set the field to a valid initial value. This is not a problem for vivid, because it sets the field to 180 via tpg_s_hsv_enc() on the control initialization, but it might be a source of errors for other drivers that use this code. Signed-off-by: NRicardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Hans Verkuil 提交于
The cec_allocate_adapter function doesn't need the parent device, only the cec_register_adapter function needs it. Drop the cec_devnode parent field, since devnode.dev.parent can be used instead. This change makes the framework consistent with other frameworks where the parent device is not used until the device is registered. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Dan Carpenter 提交于
A recent cleanup introduced a potential dereference of -EFAULT when we call kfree(map->menu_info). Fixes: 4cc5bed1 ("[media] uvcvideo: Use memdup_user() rather than duplicating its implementation") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 25 11月, 2016 7 次提交
-
-
由 Arnd Bergmann 提交于
A recent cleanup had the right idea to remove the initialization of the error variable, but missed the actual benefit of that, which is that we get warnings if there is a bug in it. Now we get a warning about a bug that was introduced by this cleanup: drivers/media/platform/davinci/vpfe_capture.c: In function 'vpfe_probe': drivers/media/platform/davinci/vpfe_capture.c:1992:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized] This adds the missing initialization that the warning is about, and another one that was preexisting and that we did not get a warning for. That second bug has existed since the driver was first added. Fixes: efb74461 ("[media] DaVinci-VPFE-Capture: Delete an unnecessary variable initialisation in vpfe_probe()") Fixes: 7da8a6cb ("V4L/DVB (12248): v4l: vpfe capture bridge driver for DM355 and DM6446") [mchehab@s-opensource.com: fix a merge conflict] Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
Usually, I don't like fixing coding style issues on non-staging drivers, as it could be a mess pretty easy, and could become like a snow ball. That's the case of recent changes on two changesets: they disalign some statements. Yet, a care a lot with cx88 driver, as it was the first driver I touched at the Kernel, and I've been maintaining it since 2005. So, several of the coding style issues were due to my code. Per Andrey's suggestion, I ran checkpatch.pl in strict mode, with fixed several other issues, did some function alinments, but broke other alinments. So, I had to manually apply another round of manual fixes to make sure that everything is ok, and to make checkpatch happy with this patch. With this patch, checkpatch.pl is now happy when called with: ./scripts/checkpatch.pl -f --max-line-length=998 --ignore PREFER_PR_LEVEL Also, the 80-cols violations that made sense were fixed. Checkpatch would be happier if we convert it to use dev_foo(), but this is a more complex change. NOTE: there are some places with msleep(1). As this driver was written at the time that the default was to sleep at least 10ms on such calls (e. g. CONFIG_HZ=100), I replaced those calls by usleep_range(10000, 20000), with should be safe to avoid breakages. Fixes: 65bc2fe8 ("[media] cx88: convert it to use pr_foo() macros") Fixes: 7b61ba8f ("[media] cx88: make checkpatch happier") Suggested-by: NAndrey Utkin <andrey_utkin@fastmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Reviewed-by: NAndrey Utkin <andrey_utkin@fastmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Arnd Bergmann 提交于
Commit 4710b752 ("[media] v4l: Add Renesas R-Car FDP1 Driver") in the v4l-dvb tree adds CONFIG_VIDEO_RENESAS_FDP1. It calls into the FCP driver, but when there is no dependency, FCP might be a module while FDP1 is built-in. We have the same logic in VIDEO_RENESAS_VSP1, which also depends on FCP not being a module when it is built-in itself. drivers/media/platform/rcar_fdp1.o: In function `fdp1_pm_runtime_resume': rcar_fdp1.c:(.text.fdp1_pm_runtime_resume+0x78): undefined reference to `rcar_fcp_enable' drivers/media/platform/rcar_fdp1.o: In function `fdp1_pm_runtime_suspend': rcar_fdp1.c:(.text.fdp1_pm_runtime_suspend+0x14): undefined reference to `rcar_fcp_disable' drivers/media/platform/rcar_fdp1.o: In function `fdp1_probe': rcar_fdp1.c:(.text.fdp1_probe+0x15c): undefined reference to `rcar_fcp_get' Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Arnd Bergmann 提交于
The new driver produces a warning when CONFIG_PM is disabled: platform/rcar_fdp1.c:2408:12: error: 'fdp1_pm_runtime_resume' defined but not used [-Werror=unused-function] platform/rcar_fdp1.c:2399:12: error: 'fdp1_pm_runtime_suspend' defined but not used [-Werror=unused-function] This marks the two functions as __maybe_unused. Fixes: 4710b752 ("[media] v4l: Add Renesas R-Car FDP1 Driver") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Shuah Khan 提交于
Remove obsolete media_device_get_devres(), media_device_find_devres(), and media_device_release_devres() interfaces. These interfaces are now obsolete. Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
This function is too big and too complex, making really hard to understand what's there. Split it into sub-routines, in order to make it easier to be understood, and to allow gcc to better parse it. As a bonus, it gets rid of a goto in the middle of a routine. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Mauro Carvalho Chehab 提交于
The dvb_net code has a really complex function, meant to handle DVB network packages: it is long, has several loops and ifs inside, and even cause warnings with gcc5. Prepare it to be split into smaller functions by storing all arguments and internal vars inside a struct. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 24 11月, 2016 7 次提交
-
-
由 Markus Elfring 提交于
Reuse existing functionality from memdup_user() instead of keeping duplicate source code. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Edgar Thier 提交于
Those formats are implemented by The DFK 23UP1300, DFK 23UX249 and DFK 23UX250 USB 3.0 industrial cameras from The Imaging Source. Signed-off-by: NEdgar Thier <info@edgarthier.net> Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Sakari Ailus 提交于
The documentation simply mentioned that one of the four pixel orders was used in the example. Now specify the exact pixelformat instead. Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Laurent Pinchart 提交于
The formats have been added without a description, fix that. Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Sakari Ailus 提交于
The formats added by this patch are: V4L2_PIX_FMT_SBGGR16 V4L2_PIX_FMT_SGBRG16 V4L2_PIX_FMT_SGRBG16 V4L2_PIX_FMT_SRGGB16 already existed before the patch. Rework the documentation to match that of the other sample depths. Also align the description of V4L2_PIX_FMT_SRGGB16 to match with other similar formats. Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com> Acked-by: NLad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Andrey Utkin 提交于
Fix this bug: "[BUG] process stuck when closing saa7146 [dvb_ttpci]" Release queued DMA buffers when ending streaming, so that videobuf_waiton() doesn't block forever. As reported, this fixes avoids occasional lockup of process reading from video device, which manifests in such log: INFO: task ffmpeg:9864 blocked for more than 120 seconds. Tainted: P O 4.6.7 #3 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ffmpeg D ffff880177cc7b00 0 9864 1 0x00000000 ffff880177cc7b00 0000000000000202 0000000000000202 ffffffff8180b4c0 ffff88019d79e4c0 ffffffff81064050 ffff880177cc7ae0 ffff880177cc8000 ffff880177cc7b18 ffff8801fd41d648 ffff8802307acca0 ffff8802307acc70 Call Trace: [<ffffffff81064050>] ? preempt_count_add+0x89/0xab [<ffffffff81477215>] schedule+0x86/0x9e [<ffffffff81477215>] ? schedule+0x86/0x9e [<ffffffffa0fe1c96>] videobuf_waiton+0x131/0x15e [videobuf_core] [<ffffffff8107727b>] ? wait_woken+0x6d/0x6d [<ffffffffa1017be9>] saa7146_dma_free+0x39/0x5b [saa7146_vv] [<ffffffffa10186c4>] buffer_release+0x2a/0x3e [saa7146_vv] [<ffffffffa0fee4a8>] videobuf_vm_close+0xd8/0x103 [videobuf_dma_sg] [<ffffffff8112049e>] remove_vma+0x25/0x4d [<ffffffff81121a32>] exit_mmap+0xce/0xf7 [<ffffffff8104381d>] mmput+0x4e/0xe2 [<ffffffff810491fd>] do_exit+0x372/0x920 [<ffffffff81049813>] do_group_exit+0x3c/0x98 [<ffffffff810522ef>] get_signal+0x4e8/0x56e [<ffffffff810710a5>] ? task_dead_fair+0xd/0xf [<ffffffff81017020>] do_signal+0x23/0x521 [<ffffffff81479e82>] ? _raw_spin_unlock_irqrestore+0x13/0x25 [<ffffffff8109710d>] ? hrtimer_try_to_cancel+0xd7/0x104 [<ffffffff8109b306>] ? ktime_get+0x4c/0xa1 [<ffffffff81096ea6>] ? update_rmtp+0x46/0x5b [<ffffffff81097ce0>] ? hrtimer_nanosleep+0xe4/0x10e [<ffffffff81096e3c>] ? hrtimer_init+0xeb/0xeb [<ffffffff810014f8>] exit_to_usermode_loop+0x4f/0x93 [<ffffffff810019fe>] syscall_return_slowpath+0x3b/0x46 [<ffffffff8147a355>] entry_SYSCALL_64_fastpath+0x8d/0x8f Reported-by: NPhilipp Matthias Hahn <pmhahn+video@pmhahn.de> Tested-by: NPhilipp Matthias Hahn <pmhahn+video@pmhahn.de> Signed-off-by: NAndrey Utkin <andrey_utkin@fastmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Andrea Gelmini 提交于
Fix a typo on a word inside it. Signed-off-by: NAndrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
- 23 11月, 2016 18 次提交
-
-
由 Dan Carpenter 提交于
We should unlock before returning this error code in vpfe_reqbufs(). Fixes: 622897da ("[media] davinci: vpfe: add v4l2 video driver support") Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Leo Sperling 提交于
This is a patch to the vpfe_video.c file that fixes an indentation warning reported by checkpatch.pl Signed-off-by: NLeo Sperling <leosperling97@gmail.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Arnd Bergmann 提交于
When building with "make W=1", we get multiple harmless build warnings for the vpfe driver: drivers/staging/media/davinci_vpfe/dm365_resizer.c:241:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration] drivers/staging/media/davinci_vpfe/dm365_resizer.c: In function 'resizer_set_defualt_configuration': drivers/staging/media/davinci_vpfe/dm365_resizer.c:831:16: error: initialized field overwritten [-Werror=override-init] drivers/staging/media/davinci_vpfe/dm365_resizer.c:831:16: note: (near initialization for 'rsz_default_config.rsz_rsc_param[0].h_typ_c') drivers/staging/media/davinci_vpfe/dm365_resizer.c:849:16: error: initialized field overwritten [-Werror=override-init] drivers/staging/media/davinci_vpfe/dm365_resizer.c:849:16: note: (near initialization for 'rsz_default_config.rsz_rsc_param[1].h_typ_c') All of them are trivial to fix without changing the behavior of the driver, as "static const" is interpreted the same as "const static", and VPFE_RSZ_INTP_CUBIC is defined as zero, so the initializations are not really needed. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Arnd Bergmann 提交于
It has never been possible to actually build this driver as a loadable module, only built-in because the Makefile attempts to build each file into its own module and fails: ERROR: "mbus_to_pix" [drivers/staging/media/davinci_vpfe/vpfe_video.ko] undefined! ERROR: "vpfe_resizer_register_entities" [drivers/staging/media/davinci_vpfe/vpfe_mc_capture.ko] undefined! ERROR: "rsz_enable" [drivers/staging/media/davinci_vpfe/dm365_resizer.ko] undefined! ERROR: "config_ipipe_hw" [drivers/staging/media/davinci_vpfe/dm365_ipipe.ko] undefined! ERROR: "ipipe_set_lutdpc_regs" [drivers/staging/media/davinci_vpfe/dm365_ipipe.ko] undefined! It took a long time to catch this bug with randconfig builds because at least 14 other Kconfig symbols have to be enabled in order to configure this one, and it was clearly only ever tested as built-in with mainline kernels, if at all. The solution is really easy: this patch changes the Makefile to link all files into one module. As discussed previously, the driver has never before used successfully as a loadable module, but there is no reason to prevent that configuration. Link: http://lkml.iu.edu/hypermail/linux/kernel/1512.1/02383.htmlSigned-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Manuel Rodriguez 提交于
Fix spelling error on a comment, change 'wether' to 'whether' Signed-off-by: NManuel Rodriguez <manuel2982@gmail.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Saatvik Arya 提交于
Fix spelling mistakes which referred to OUTPUT as OUPUT. Signed-off-by: NSaatvik Arya <aryasaatvik@gmail.com> Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Sean Young 提交于
This function just submits the urb much like mceusb_dev_resume; removing it simplifies mce_request_packet. Also add missing usb_kill_urb to mce_dev_probe. Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Sean Young 提交于
Such debug message has a logic to track the IR status, but it doesn't provide much info. So, get rid of it. Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Shuah Khan 提交于
Update documentation for media_entity_notify to clearly state the usage restrictions. This handler is intended for creating links between exiting entities and should not used to create and register entities. Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Буди Романто, AreMa Inc 提交于
The current limit is too low for latest cards with 8+ tuners on a single slot. IMHO, the most appropriate minimum default is 16. Signed-off-by: NБуди Романто, AreMa Inc <knightrider@are.ma> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Arnd Bergmann 提交于
In randconfig builds that select VIDEO_EM28XX_V4L2 and MEDIA_SUBDRV_AUTOSELECT, but not MEDIA_CAMERA_SUPPORT, we get a Kconfig warning: warning: (VIDEO_EM28XX_V4L2) selects VIDEO_MT9V011 which has unmet direct dependencies (MEDIA_SUPPORT && I2C && VIDEO_V4L2 && MEDIA_CAMERA_SUPPORT) This avoids the warning by making that 'select' conditional on MEDIA_CAMERA_SUPPORT. Alternatively we could mark EM28XX as 'depends on MEDIA_CAMERA_SUPPORT', but it does not seem to have any real dependency on that itself. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Arnd Bergmann 提交于
If MEDIA_SUBDRV_AUTOSELECT and VIDEO_GO7007 are both set, we automatically select VIDEO_OV7640, but that depends on MEDIA_CAMERA_SUPPORT, so we get a Kconfig warning if that is disabled: warning: (VIDEO_GO7007) selects VIDEO_OV7640 which has unmet direct dependencies (MEDIA_SUPPORT && I2C && VIDEO_V4L2 && MEDIA_CAMERA_SUPPORT) This adds another dependency so we don't accidentally select it when it is unavailable. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Arnd Bergmann 提交于
The systime function uses struct timespec, which we want to stop using in the kernel because it overflows in 2038. Fortunately, this use in dibx000_common is in a function that is never called, so we can just remove it. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Joerg Riechardt 提交于
The stv090x driver uses the lookup table for signal strength already, with this patch we use the lookup tables for carrier/noise ratio as well. This has the advantage, that values for DVB-S and DVB-S2 are now corresponding, while before they were way off. The values are now proportional to real carrier/noise ratio, while before they were corresponding to register values. So now applications are able to give the user real carrier/noise ratio. Because the output has to be within 0x0000...0xFFFF the three negative values for DVB-S2 are omitted. This is no significant loss, because reception is lost at 7.5 dB already (TT S2-1600, Cine S2), so the negative values are not really important, and also for DVB-S they don´t exist. Signed-off-by: NJoerg Riechardt <j.riechardt@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Geliang Tang 提交于
Use module_pci_driver() helper to simplify the code. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Dan Carpenter 提交于
We pass an int pointer to stk_camera_read_reg() but only write to the highest byte. It's a bug on big endian systems and generally a nasty thing to do and doesn't match the write function either. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Ruqiang Ju 提交于
The clock of IR can be provided by the clock provider and controlled by common clock framework APIs. Signed-off-by: NRuqiang Ju <juruqiang@huawei.com> Signed-off-by: NJiancheng Xue <xuejiancheng@hisilicon.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-
由 Antti Palosaari 提交于
Remove DVB-T2 BER as it does not work at all and I didn't find how to fix. Fix DVB-T and DVB-C BER. It seems to return new some realistic looking values. Use (1 << 24) base for CNR calculations to keep it in line with dvb logarithm functions. Move all statistic logic to mn88473_read_status() function. Use regmap_bulk_read() for reading multiple registers as a one go. Many more and less minor changes. Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
-