- 07 1月, 2021 5 次提交
-
-
由 Dennis Li 提交于
old code wrongly used the bad page status as the function return value, which cause amdgpu_ras_badpages_read always return failed. Signed-off-by: NDennis Li <Dennis.Li@amd.com> Reviewed-by: NGuchun Chen <guchun.chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jiawei Gu 提交于
Navi12 HDCP & DTM deinitialization needs continue to free bo if already created though initialized flag is not set. Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NJiawei Gu <Jiawei.Gu@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dennis Li 提交于
When GFXOFF is enabled and GPU is idle, driver will fail to access some registers. Therefore change to disable power gating before all access registers with MMIO. Dmesg log is as following: amdgpu 0000:03:00.0: amdgpu: amdgpu: finishing device. amdgpu: cp queue pipe 4 queue 0 preemption failed amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2 amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706 amdgpu 0000:03:00.0: amdgpu: failed to write reg 2890 wait reg 28a2 amdgpu 0000:03:00.0: amdgpu: failed to write reg 1a6f4 wait reg 1a706 Signed-off-by: NDennis Li <Dennis.Li@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dennis Li 提交于
ASD and TA share the same firmware in SIENNA_CICHLID and only TA firmware is requested during boot, so only need release TA firmware when remove device. [ 83.877150] general protection fault, probably for non-canonical address 0x1269f97e6ed04095: 0000 [#1] SMP PTI [ 83.888076] CPU: 0 PID: 1312 Comm: modprobe Tainted: G W OE 5.9.0-rc5-deli-amd-vangogh-0.0.6.6-114-gdd99d5669a96-dirty #2 [ 83.901160] Hardware name: System manufacturer System Product Name/TUF Z370-PLUS GAMING II, BIOS 0411 09/21/2018 [ 83.912353] RIP: 0010:free_fw_priv+0xc/0x120 [ 83.917531] Code: e8 99 cd b0 ff b8 a1 ff ff ff eb 9f 4c 89 f7 e8 8a cd b0 ff b8 f4 ff ff ff eb 90 0f 1f 00 0f 1f 44 00 00 55 48 89 e5 41 54 53 <4c> 8b 67 18 48 89 fb 4c 89 e7 e8 45 94 41 00 b8 ff ff ff ff f0 0f [ 83.937576] RSP: 0018:ffffbc34c13a3ce0 EFLAGS: 00010206 [ 83.943699] RAX: ffffffffbb681850 RBX: ffffa047f117eb60 RCX: 0000000080800055 [ 83.951879] RDX: ffffbc34c1d5f000 RSI: 0000000080800055 RDI: 1269f97e6ed04095 [ 83.959955] RBP: ffffbc34c13a3cf0 R08: 0000000000000000 R09: 0000000000000001 [ 83.968107] R10: ffffbc34c13a3cc8 R11: 00000000ffffff00 R12: ffffa047d6b23378 [ 83.976166] R13: ffffa047d6b23338 R14: ffffa047d6b240c8 R15: 0000000000000000 [ 83.984295] FS: 00007f74f6712540(0000) GS:ffffa047fbe00000(0000) knlGS:0000000000000000 [ 83.993323] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 84.000056] CR2: 0000556a1cca4e18 CR3: 000000021faa8004 CR4: 00000000003706f0 [ 84.008128] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 84.016155] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 84.024174] Call Trace: [ 84.027514] release_firmware.part.11+0x4b/0x70 [ 84.033017] release_firmware+0x13/0x20 [ 84.037803] psp_sw_fini+0x77/0xb0 [amdgpu] [ 84.042857] amdgpu_device_fini+0x38c/0x5d0 [amdgpu] [ 84.048815] amdgpu_driver_unload_kms+0x43/0x70 [amdgpu] [ 84.055055] drm_dev_unregister+0x73/0xb0 [drm] [ 84.060499] drm_dev_unplug+0x28/0x30 [drm] [ 84.065598] amdgpu_dev_uninit+0x1b/0x40 [amdgpu] [ 84.071223] amdgpu_pci_remove+0x4e/0x70 [amdgpu] [ 84.076835] pci_device_remove+0x3e/0xc0 [ 84.081609] device_release_driver_internal+0xfb/0x1c0 [ 84.087558] driver_detach+0x4d/0xa0 [ 84.092041] bus_remove_driver+0x5f/0xe0 [ 84.096854] driver_unregister+0x2f/0x50 [ 84.101594] pci_unregister_driver+0x22/0xa0 [ 84.106806] amdgpu_exit+0x15/0x2b [amdgpu] Signed-off-by: NDennis Li <Dennis.Li@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
global noretry setting is cached to gmc.noretry Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 24 12月, 2020 5 次提交
-
-
由 Alex Deucher 提交于
This is not a scsi driver. Reviewed-by: NNirmoy Das <nirmoy.das@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Fixes a crash in drm_object_property_set_value() because the property is not set for internal DP ports that connect to a bridge chips (e.g., DP to VGA or DP to LVDS). Bug: https://bugzilla.kernel.org/show_bug.cgi?id=210739 Fixes: 65bf2cf9 ("drm/amdgpu: utilize subconnector property for DP through atombios") Tested-By: NKris Karas <bugs-a17@moonlit-rail.com> Cc: Oleg Vasilev <oleg.vasilev@intel.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.10.x
-
由 Hawking Zhang 提交于
GUI_IDLE interrupts controlled by CP_INT_CNTL_RING0 are only applicable to me0 pipe0. For ASICs that have gfx pipe removed, don't toggle those bits. Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
The number of crtc should be 0 for ASICs that don't have display engine. Remove the unnecessary asic type check then. Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Hawking Zhang 提交于
Check number of gfx ring, rather than asic type, before cp gfx engine initialization so driver just need to make sure number of gfx ring is initialized correctly in gfx early_init phase. No need to add additional asic type check everywhere when there is new asic with gfx pipe removed. Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: NFeifei Xu <Feifei.Xu@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 18 12月, 2020 1 次提交
-
-
由 Alex Deucher 提交于
There is no reserveration so set the size to 0. Fixes a regression on SR-IOV. Reviewed-by: NGuchun Chen <guchun.chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 17 12月, 2020 2 次提交
-
-
由 Tao Zhou 提交于
This makes it easier to debug what block is causing the fault, same as sienna_cichlid. Signed-off-by: NTao Zhou <tao.zhou1@amd.com> Reviewed-by: NJiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Tao Zhou 提交于
Use mode1 reset for dimgrey_cavefish by default. Signed-off-by: NTao Zhou <tao.zhou1@amd.com> Reviewed-by: NJiansong Chen <Jiansong.Chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 16 12月, 2020 14 次提交
-
-
由 Tom Rix 提交于
See Documentation/core-api/printk-formats.rst. h should no longer be used in the format specifier for printk. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NTom Rix <trix@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
We need to move the check under the non-headless case, otherwise we always reserve the VGA save size. Fixes: 157fe68d ("drm/amdgpu: fix size calculation with stolen vga memory") Reviewed-by: NGuchun Chen <guchun.chen@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Jiange Zhao 提交于
In Virtualization case, when one VF is sending too many FLR requests, hypervisor would stop responding to this VF's request for a long period of time. This is called event guard. During this period of cooling time, guest driver should wait instead of doing other things. After this period of time, guest driver would resume reset process and return to normal. Currently, guest driver would wait 12 seconds and return fail if it doesn't get response from host. Solution: extend this waiting time in guest driver and poll response periodically. Poll happens every 6 seconds and it will last for 60 seconds. v2: change the max repetition times from number to macro. Signed-off-by: NJiange Zhao <Jiange.Zhao@amd.com> Acked-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Yifan Zhang 提交于
it could also be insufficient vram that makes amdgpu_amdkfd_reserve_mem_limit fail. Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
So we know when it's enabled and what method we are using. Acked-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Simplify the logic in the runtime resume handling for atpx Acked-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
The platform knows it's doing d3cold. Acked-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Enable runtime pm on non HG/PX BOCO capable boards. Acked-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Change it to check if the device has ACPI power resources. Acked-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Check if the device has ACPI power resources so we can enable runtime pm if so. Acked-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
In preparation for systems that support d3cold on dGPUs independent of PX/HG. No functional change intended. Acked-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Stanley.Yang 提交于
skip load smu and sdma fw on sriov due to sos, ta and asd fw have been skipped for SIENNA_CICHLID. V2: move asic check into smu11 Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com> Reviewed-by: NKevin Wang <kevin1.wang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Likun Gao 提交于
S0ix only makes sense on APUs since they are part of the platform, so only when the ASIC is APU should set amdgpu_acpi_is_s0ix_supported flag to deal with the related situation. Signed-off-by: NLikun Gao <Likun.Gao@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Xiaomeng Hou 提交于
Without doing the soft reset, register mmSDMA0_GFX_RB_WPTR's value could not be reset to 0 when sdma block resumes. That would cause the ring buffer's read and write pointers not equal and ring test fail. So add the soft reset step. Signed-off-by: NXiaomeng Hou <Xiaomeng.Hou@amd.com> Reviewed-by: NHuang Rui <ray.huang@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 11 12月, 2020 1 次提交
-
-
由 Christian König 提交于
The text output should not be more than a page, so only print the first 32 page table entries. If we need all of them we can still look into the binary trace. Signed-off-by: NChristian König <christian.koenig@amd.com> Reviewed-by: NShashank Sharma <shashank.sharma@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 10 12月, 2020 1 次提交
-
-
由 Andrey Grodzovsky 提交于
For BOs imported from outside of amdgpu, setting of amdgpu_gem_object_funcs was missing in amdgpu_dma_buf_create_obj. Fix by refactoring BO creation and amdgpu_gem_object_funcs setting into single function called from both code paths. Fixes: d693def4 ("drm: Remove obsolete GEM and PRIME callbacks from struct drm_driver") v2: Use use amdgpu_gem_object_create() directly v3: fix warning Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 09 12月, 2020 11 次提交
-
-
由 Andrey Grodzovsky 提交于
For BOs imported from outside of amdgpu, setting of amdgpu_gem_object_funcs was missing in amdgpu_dma_buf_create_obj. Fix by refactoring BO creation and amdgpu_gem_object_funcs setting into single function called from both code paths. Fixes: d693def4 ("drm: Remove obsolete GEM and PRIME callbacks from struct drm_driver") v2: Use use amdgpu_gem_object_create() directly v3: fix warning Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
If we need to keep the stolen vga memory, make sure it is at least as big as the legacy vga size. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Stanley.Yang 提交于
each sdma instance fw_version and feature_version should be set right value when asic type isn't between SIENNA_CICHILD and CHIP_DIMGREY_CAVEFISH Signed-off-by: NStanley.Yang <Stanley.Yang@amd.com> Reviewed-by: NTao Zhou <tao.zhou1@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Arnd Bergmann 提交于
There is still a warning when CONFIG_DEBUG_FS is disabled: drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:1145:13: error: 'amdgpu_ras_debugfs_create_ctrl_node' defined but not used [-Werror=unused-function] 1145 | static void amdgpu_ras_debugfs_create_ctrl_node(struct amdgpu_device *adev) Change the code again to make the compiler actually drop this code but not warn about it. Fixes: ae2bf61f ("drm/amdgpu: guard ras debugfs creation/removal based on CONFIG_DEBUG_FS") Reviewed-by: NTao Zhou <tao.zhou1@amd.com> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
If we need to keep the stolen vga memory, make sure it is at least as big as the legacy vga size. Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
No longer used. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Rather than in late_init to avoid race conditions between freeing the buffers and the initial modeset. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Works using BACO. Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Works now that the BACO sequence is fixed. Reviewed-by: NEvan Quan <evan.quan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Roman Li 提交于
[Why] Scatter/gather feature is supported on Vangogh. [How] Add GTT domain support for Vangogh to enable display buffers in system memory. Signed-off-by: NRoman Li <roman.li@amd.com> Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Nirmoy Das 提交于
Replace hardcoded vmid number with AMDGPU_NUM_VMID macro. Signed-off-by: NNirmoy Das <nirmoy.das@amd.com> Acked-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-