[Why]
Found that dc_link_reallocate_mst_payload is not used anymore
in any of the use case scenario.

[How]
removed dc_link_reallocate_mst_payload function definition
and declaration.
Signed-off-by: NRobin Singh <robin.singh@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Primary feature use case is with eDP panels.

[How]
Fail seamless boot validation if display is not an eDP panel.
Signed-off-by: NAnthony Wang <anthony1.wang@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
the current implementation of hdcp2 rx id list validation does not
have handler/checker for invalid message status, e.g. HMAC, the V
parameter calculated from PSP not matching the V prime from Rx.

[how]
return a generic FAILURE for any message status not SUCCESS or
REVOKED.
Signed-off-by: NDingchen (David) Zhang <dingchen.zhang@amd.com>
Reviewed-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
currently we enforce to update hdcp display using TYPE0, but there
is case that connector CP type prop be TYPE1 instead of type0.

[how]
using the drm prop of CP type of the connector as input argument.
Signed-off-by: NDingchen (David) Zhang <dingchen.zhang@amd.com>
Reviewed-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
We want to immediately fail seamless boot validation if DSC is active,
as VBIOS currently does not support DSC timings. Add a check for
the relevant flag in dc_validate_seamless_boot_timing.
Signed-off-by: NAnthony Wang <anthony1.wang@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
During dsc enable, a divide by zero condition triggered the
kernel crash.

[how]
An IGT test, which enable the DSC, was crashing at the time of
restore the default dsc status, becaue of h_totals value
becoming 0. So add a check before divide condition. If h_total
is zero, gracefully ignore and set the default value.

kernel panic log:

	[  128.758827] divide error: 0000 [#1] PREEMPT SMP NOPTI
	[  128.762714] CPU: 5 PID: 4562 Comm: amd_dp_dsc Tainted: G        W         5.4.19-android-x86_64 #1
	[  128.769728] Hardware name: ADVANCED MICRO DEVICES, INC. Mauna/Mauna, BIOS WMN0B13N Nov 11 2020
	[  128.777695] RIP: 0010:hubp2_vready_at_or_After_vsync+0x37/0x7a [amdgpu]
	[  128.785707] Code: 80 02 00 00 48 89 f3 48 8b 7f 08 b ......
	[  128.805696] RSP: 0018:ffffad8f82d43628 EFLAGS: 00010246
	......
	[  128.857707] CR2: 00007106d8465000 CR3: 0000000426530000 CR4: 0000000000140ee0
	[  128.865695] Call Trace:
	[  128.869712] hubp3_setup+0x1f/0x7f [amdgpu]
	[  128.873705] dcn20_update_dchubp_dpp+0xc8/0x54a [amdgpu]
	[  128.877706] dcn20_program_front_end_for_ctx+0x31d/0x463 [amdgpu]
	[  128.885706] dc_commit_state+0x3d2/0x658 [amdgpu]
	[  128.889707] amdgpu_dm_atomic_commit_tail+0x4b3/0x1e7c [amdgpu]
	[  128.897699] ? dm_read_reg_func+0x41/0xb5 [amdgpu]
	[  128.901707] ? dm_read_reg_func+0x41/0xb5 [amdgpu]
	[  128.905706] ? __is_insn_slot_addr+0x43/0x48
	[  128.909706] ? fill_plane_buffer_attributes+0x29e/0x3dc [amdgpu]
	[  128.917705] ? dm_plane_helper_prepare_fb+0x255/0x284 [amdgpu]
	[  128.921700] ? usleep_range+0x7c/0x7c
	[  128.925705] ? preempt_count_sub+0xf/0x18
	[  128.929706] ? _raw_spin_unlock_irq+0x13/0x24
	[  128.933732] ? __wait_for_common+0x11e/0x18f
	[  128.937705] ? _raw_spin_unlock_irq+0x13/0x24
	[  128.941706] ? __wait_for_common+0x11e/0x18f
	[  128.945705] commit_tail+0x8b/0xd2 [drm_kms_helper]
	[  128.949707] drm_atomic_helper_commit+0xd8/0xf5 [drm_kms_helper]
	[  128.957706] amdgpu_dm_atomic_commit+0x337/0x360 [amdgpu]
	[  128.961705] ? drm_atomic_check_only+0x543/0x68d [drm]
	[  128.969705] ? drm_atomic_set_property+0x760/0x7af [drm]
	[  128.973704] ? drm_mode_atomic_ioctl+0x6f3/0x85a [drm]
	[  128.977705] drm_mode_atomic_ioctl+0x6f3/0x85a [drm]
	[  128.985705] ? drm_atomic_set_property+0x7af/0x7af [drm]
	[  128.989706] drm_ioctl_kernel+0x82/0xda [drm]
	[  128.993706] drm_ioctl+0x225/0x319 [drm]
	[  128.997707] ? drm_atomic_set_property+0x7af/0x7af [drm]
	[  129.001706] ? preempt_count_sub+0xf/0x18
	[  129.005713] amdgpu_drm_ioctl+0x4b/0x76 [amdgpu]
	[  129.009705] vfs_ioctl+0x1d/0x2a
	[  129.013705] do_vfs_ioctl+0x419/0x43d
	[  129.017707] ksys_ioctl+0x52/0x71
	[  129.021707] __x64_sys_ioctl+0x16/0x19
	[  129.025706] do_syscall_64+0x78/0x85
	[  129.029705] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Signed-off-by: NRobin Singh <robin.singh@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Reviewed-by: NRobin Singh <Robin.Singh@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Accept non-linear buffers which use a multi-planar format, as long
as they don't use DCC.

Tested on GFX9 with NV12.
Signed-off-by: NSimon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: NBas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This patch checks the return value of the function
dc_link_add_remote_sink before using it. This was causing
a crash during consecutive hotplugs of DP MST displays.

Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NShashank Sharma <shashank.sharma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 55fa622f.

The regression caused by the original patch has been
cleared, thus introduce back the change.
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Current list supports modifiers that have DCC_MAX_COMPRESSED_BLOCK
set to AMD_FMT_MOD_DCC_BLOCK_128B, while AMD_FMT_MOD_DCC_BLOCK_64B
is used instead by userspace.

[How]
Replace AMD_FMT_MOD_DCC_BLOCK_128B with AMD_FMT_MOD_DCC_BLOCK_64B
for modifiers with DCC supported.

Fixes: faa37f54 ("drm/amd/display: Expose modifiers")
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: NBas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: NBas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DC version 3.2.131 brings improvements in multiple areas.
In summary, we highlight:
 -Enhancement for multiple eDP BL control.
 -Add debug flag to enable eDP ILR by default and debugfs to repress HPD/HPR_RX IRQ.
 -Fixes for DSC enable sequence,Force vsync flip,hang when psr is enabled etc.
 -Firmware releases:
  0.0.60
  0.0.61
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
SKIP_CRTC_DISABLE bit should be applicable to all dcn asics
not only Raven.

[How]
Replace check for Raven only with check for all DCNs.
Signed-off-by: NRoman Li <Roman.Li@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY & HOW]
Driver currently assumes only 1 eDP is connected. Added support for
multiple eDP BL control.
Signed-off-by: NJake Wang <haonan.wang2@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When boot into OS, seamless boot device won't blank stream.
Driver update dpp clock when scanline position in vactive will show
garbage on screen.

[How]
Wait for vblank for seamless boot edp display when driver update dpp clock.
The apply seamless boot flag will be clear when OS call SetVisibility on.
Therefore we only wait for vblank once after boot into OS.
Signed-off-by: NLewis Huang <Lewis.Huang@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For debugging reasons it can be beneficial to disable any hotplug and DP shortpulse interrupt handling.

[How]
Expose a debugfs to set a flag to bypass HPD IRQ handling and skip IRQ handling if flag is set.
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why/how]
Connecting clock optimization functions to dcn301 HWSS
to enable power state enter/exit optimization
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why & how]
Removing unused DSC flag which is incorrect and is not used.
We are only using stream->timing.flags.DSC for DSC's current
state. Stream state as an input parameter and should not contain
any past status flags.
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Underflow observed when disabling PIP overlay in-game when
vsync is disabled, due to OTC master lock not working with
game pipe which is immediate flip.

[How]
When performing a full update, override flip_immediate value
to false for all planes, so that flip occurs on vsync.
Signed-off-by: NAnthony Wang <anthony1.wang@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
If no repeaters are found, we do not need or want to attempt to
link-train repeaters, as this could cause bugs.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We're always validating DML with simple 422 DSC even if native 422 DSC
is in use.

[How]
Use the mode configuration from the timing.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Static cleanup for eDP ILR Support.
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DSC is enabled before reset link and potentially cause DSC enable fail problem.
[How]
Enable DSC after link is reseted
Signed-off-by: NMike Hsieh <chun-wei.hsieh@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
VBIOS currently sets the max link rate found in eDP 1.4 SUPPORTED_LINK_RATES table
If eDP fastboot optimizations are enabled, the link rate remains at max after init

[How]
Determine optimal link rate during boot, disable seamless boot
and eDP fastboot optimizations if link rate optimization is required
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Allow per-asic enablement of ILR feature with debug flag
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Acked-by: NBindu Ramamurthy <bindur12@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:941:13: warning: ‘dm_dmub_trace_high_irq’ defined but not used [-Wunused-function]
  941 | static void dm_dmub_trace_high_irq(void *interrupt_params)
      |             ^~~~~~~~~~~~~~~~~~~~~~

Fixes: a08f16cf ("drm/amd/display: Log DMCUB trace buffer events")
Cc: Leo (Hanghong) Ma <hanghong.ma@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Harry Wentland <Harry.Wentland@amd.com>
Cc: Solomon Chiu <solomon.chiu@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NShaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
Update SR Exit Latency to fix screen flickering caused due to OTG
underflow. This is the recommended value given by the hardware IP team.
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit f4a9be99.

The original commit was found to cause the following two issues
on sienna cichlid:
1. Refresh rate locked during vrrdemo
2. Display sticks on flipped landscape mode after changing
   orientation, and cannot be changed back to regular landscape
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DC version 3.2.130 brings improvements in multiple areas.
In summary, we highlight:

- Firmware release 0.0.59
- Fixes on display experiences for 4k TVs, register mask missing, etc.
- Enhancements on MST, code cleaning and debug messages.
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[How&Why]
add params to send FEC status to firmware
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Pipe input DSC bpc has a type mismatch with maximum DSC
input bpc - align the maximum with the pipe input type,
unsigned integer.

When checking the type we shoudl also check for an
implicit value of 0 and align with what the spreadsheet
does - default to max.

Rename output_bpc to dsc_input_bpc to reflect what the
field is actually used for.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
When on the desktop freesync is not enabled,
doing a frame stretch causes the TV to display
undesired output.

[HOW]
By changing the logic so that when ever fresync
is supported the TV is notified we are in fressync
instead on a non fresync state.
Signed-off-by: NHarry VanZyllDeJong <hvanzyll@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
The driver always wants to synchronize streams
to the first edge of master's vsync pulse.
In order to determine that we can read timing
flags that are used to program vsync.

Master stream's vsync polarity - Multi Display Stream Synchronization edge:

        Negative               -              Falling Edge

        Positive               -              Rising Edge
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Need to be able to trigger software hotplug for MST connectors

[How]
For unplug the driver calls to disable topologies manager
that connector is attached to. For plugging in it does the
whole rediscovery of all connectors in drm device and enbles their
topologies if attached.

The interface for MST connectors works in the following way:

1. To disconnect all MST topologies currently connected:
   echo 0 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst

2. To reconnect/rediscover all topologies that are physically
connected to the card:
   echo 1 > /sys/kernel/debug/dri/0/amdgpu_dm_trigger_hpd_mst

A related fix which has been merged with this patch
Leo Ma(Hanghong Ma)'s work:

Set power states before disable MST topology
[Why]
	When we try to disable MST topology from the
	debugfs entry, some receiver will hang.
[How]
	Set DPCD 600h power states to
	2(power down mode)before disable MST topology.
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Reviewed-by: NSun peng Li <Sunpeng.Li@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why/how]
Skip logic that sets preffered link settings
and just retrain with new link_settings from Debugfs
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Acked-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DCN3 is not reusing DCN1 mask_sh_list, causing
SURFACE_FLIP_INT_MASK missing in the mapping.

[How]
Add the corresponding entry to DCN3 list.
Signed-off-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Commit 1c85f3db
("drm/amd/display: Add kernel doc to crc_rd_wrk
field") adds kernel doc for crc_rd_wrk field in
amdgpu_dm.h but it's incorrectly formatted.
Make htmldocs warns:

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.h:398: warning:
Incorrect use of kernel-doc format:          * @crc_rd_wrk

[How]
Tweak the kernel doc for crc_rd_wrk.

Fixes: 1c85f3db ("drm/amd/display: Add kernel doc to crc_rd_wrk field")
Signed-off-by: NWayne Lin <Wayne.Lin@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why/how]
Due to compiler optimization the values would be
passed to the division function uninitialized
causing a div by zero. Initialize the numerator
and denominator to 0 and 1 to prevent division
by zero.
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Currently to view the DCC_EN bit the entire DTN log
must be dumped. A compact method to view the DCC_EN
bit is desirable.

[how]
Introduce new debugfs interface that only dumps the
DCC_EN bit.

Example usage:
cat /sys/kernel/debug/dri/0/amdgpu_dm_dcc_en
Signed-off-by: NVictor Lu <victorchengchi.lu@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>