- 02 5月, 2017 4 次提交
-
-
由 Martin Kepplinger 提交于
The MSB for the first byte of touch data transmission is always 1. Make it a little more obvious we're testing this bit by using BIT(7). Signed-off-by: NMartin Kepplinger <martink@posteo.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sebastian Reichel 提交于
Cleanup driver slightly by using input_set_capability() instead of manually setting the required bits. Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sebastian Reichel 提交于
The interrupt should be requested for the platform device and not for the input device. Fixes: 7f9ce649 ("Input: twl4030-pwrbutton - simplify driver using devm_*") Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Martin Kepplinger 提交于
The device could as well be in command mode, in which this driver cannot handle the device. When opening the device, let's make sure the device will be in the mode we expect it to be for this driver. Signed-off-by: NMartin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 25 4月, 2017 1 次提交
-
-
由 Marcos Paulo de Souza 提交于
Add description of uinput module with a few examples. Signed-off-by: NMarcos Paulo de Souza <marcos.souza.org@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 21 4月, 2017 2 次提交
-
-
由 Martin Kepplinger 提交于
Add a simple binding document describing the supported devices and the I2C bus address. Signed-off-by: NMartin Kepplinger <martin.kepplinger@ginzinger.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Rahul Bedarkar 提交于
s/rollove/rollover/ Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 20 4月, 2017 1 次提交
-
-
由 Juergen Gross 提交于
Add a parameter for setting the resolution of xen-kbdfront in order to be able to cope with a (virtual) frame buffer of arbitrary resolution. While at it remove the pointless second reading of parameters from Xenstore in the device connection phase: all parameters are available during device probing already and that is where they should be read. Signed-off-by: NJuergen Gross <jgross@suse.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 19 4月, 2017 2 次提交
-
-
由 Dmitry Torokhov 提交于
When switching rotary controlelr from plain IRQ number to IRQ resource, I messed up the syntax. Fixes: d422be5f ("Input: eeti_ts - expect platform code to set ... ") Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
Do not recommend people write to Dominic, rather everyone should be using linux-input mailing list. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 18 4月, 2017 10 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Unfortunately, Sphinx (or LaTeX) can't handle literal blocks inside footnotes. So, just use normal text for the two literal code-blocks that documents the output of /sys/kernel/debug/usb/devices for xpad devices. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Mauro Carvalho Chehab 提交于
The /proc/bus/usb/devices got moved to sysfs. It is now sitting at: /sys/kernel/debug/usb/devices Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
Stop saying that API is experimental and that only USB is supported, acknowledge that evdev is the preferred interface, and remove paragraph encouraging people sending snail mail to Vojtech :) along with his email. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
Split input documentation into several groups: kernel- and user-facing, and notes about individual device drivers. Move device drivers docs into a separate subdirectory. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
Everyone should be using multitouch protocol B (slotted) now. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
Consolidate use instructions and userspace API notes into the same chapter; remove completely obsolete references, move into a separate subdirectory. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
This is just a part of kernel documentation, it does not require explicit license notice. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
The heading level should be the same as for other devices. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
The driver has been converted to use generic device properties, so stop referring to platform data. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
Move the documentation for Amiga CD32 together with other parallel port joysticks. Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 15 4月, 2017 6 次提交
-
-
由 Nick Dyer 提交于
The polled firmware update proved unreliable when testing on S7817. Use attention to signal commands are complete. Signed-off-by: NNick Dyer <nick@shmanahar.org> Tested-by: NChris Healy <cphealy@gmail.com> Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Nick Dyer 提交于
The data in F12_2D_Ctrl8 corresponds to the inactive border width used by the RMI device. It is not in pixel units and should not be treated as a clip value. Signed-off-by: NNick Dyer <nick@shmanahar.org> Tested-by: NChris Healy <cphealy@gmail.com> Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Nick Dyer 提交于
When IRQ handling was moved to rmi_driver in 3aeed5b5 the naming of the interrupt changed from "rmi4_i2c" to "2-0020" (or similar). This patch restores the previous behaviour and makes the interrupt easier to identify in /proc/interrupts. Signed-off-by: NNick Dyer <nick@shmanahar.org> Tested-by: NChris Healy <cphealy@gmail.com> Acked-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Martin Kepplinger 提交于
ar1021_i2c also supports the ar1020 device I'm using. This is tested. They also share the same datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/40001393C.pdf So let users see that they have a compatible in front of them by adding AR1020 to the driver's description. Signed-off-by: NMartin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
We should not be forcing edge triggered interrupt, but rather let platform decide the kind of trigger it needs to use. Also, the driver is not quite safe with regard to edge-triggered interrupts as it does not try to kick the controller after requesting/enabling IRQ. Reviewed-By: NChristian Gmeiner <christian.gmeiner@gmail.com> Tested-by: NMartin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
The name field in structure i2c_device_id is 20 characters, and we expect it to be NULL-terminated, however we are trying to stuff it with 21 bytes and thus NULL-terminator is lost. This causes issues when one creates device with name "MICROCHIP_AR1021_I2C" as i2c core cuts off the last "C", and automatic module loading by alias does not work as result. The -I2C suffix in the device name is superfluous, we know what bus we are dealing with, so let's drop it. Also, no other driver uses capitals, and the manufacturer name is normally not included, except in very rare cases of incompatible name collisions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116211 Fixes: dd4cae8b ("Input: Add Microchip AR1021 i2c touchscreen") Reviewed-By: NChristian Gmeiner <christian.gmeiner@gmail.com> Tested-by: NMartin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 12 4月, 2017 3 次提交
-
-
由 Martin Kepplinger 提交于
Use the common kernel coding style and corrently align parameters with open parenthesis. Signed-off-by: NMartin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Fabio Estevam 提交于
clk_prepare_enable() may fail, so we better check its return value and propagate it in the case of error. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Fabio Estevam 提交于
If imx6ul_tsc_init() fails we should not return directly. We should disable the previously acquired clocks in this case. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 11 4月, 2017 8 次提交
-
-
由 Christophe JAILLET 提交于
According to the previous error handling code, it is likely that 'goto err_free_keymap' is expected here in order to avoid a memory leak in error handling path. Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Cameron Gutman 提交于
There are several quirky Xbox One pads that depend on initialization packets that the Microsoft pads don't require. To deal with these, I've added a mechanism for issuing device-specific initialization packets using a VID/PID-based quirks list. For the initial set of init quirks, I have added quirk handling from Valve's Steam Link xpad driver[0] and the 360Controller project[1] for macOS to enable some new pads to work properly. This should enable full functionality on the following quirky pads: 0x0e6f:0x0165 - Titanfall 2 gamepad (previously fully non-functional) 0x0f0d:0x0067 - Hori Horipad (analog sticks previously non-functional) 0x24c6:0x541a - PowerA Xbox One pad (previously fully non-functional) 0x24c6:0x542a - PowerA Xbox One pad (previously fully non-functional) 0x24c6:0x543a - PowerA Xbox One pad (previously fully non-functional) [0]: https://github.com/ValveSoftware/steamlink-sdk/blob/master/kernel/drivers/input/joystick/xpad.c [1]: https://github.com/360Controller/360ControllerSigned-off-by: NCameron Gutman <aicommander@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Martin Kepplinger 提交于
sparse says warning: incorrect type in assignment (different base types) expected unsigned short [unsigned] [usertype] offset got restricted __be16 [usertype] <noident> for every usage of cpu_to_be16 in yealink.c. Defining it __be16 in the first place shouldn't hurt. Signed-off-by: NMartin Kepplinger <martin.kepplinger@ginzinger.com> Signed-off-by: Henk.Vergonet@gmail.com Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Geliang Tang 提交于
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Geliang Tang 提交于
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Geliang Tang 提交于
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Geliang Tang 提交于
Use setup_timer() instead of init_timer() to simplify the code. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Hans de Goede 提交于
When submitting the support for the ACPI0011 windows tablet keys device I mapped the "windows" logo homekey to KEY_HOMEPAGE. But this is inconsistent with how it is done on windows tablets using the old PNP0C40 ACPI device and it does not match the HUT spec, which says that usage-page 7 usage 0xe3 is "Keyboard Left GUI". This commit maps usage-page 7 usage 0xe3 to KEY_LEFTMETA fixing this. Fixes: 4c3362f4 ("Input: soc_button_array - add support for ACPI 6.0...") Signed-off-by: NHans de Goede <hdegoede@redhat.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 06 4月, 2017 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Now that the images got converted to svg, add them at the ff.rst file. NOTE: After merging upstream, the "figure" tag should be replaced by the new "kernel-figure" tag, in order for the SVG images to be included at the PDF files. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Mauro Carvalho Chehab 提交于
We're using svg as the standard format for vectorial images. Convert it to .svg, in a way that it is easily editable. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Mauro Carvalho Chehab 提交于
We're using svg as the standard format for vectorial images. Convert shape.fig to .svg, in a way that it is easily editable. Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-