The use of ALIGN() in uvc_alloc_entity() is incorrect, since the size of
(entity->pads) is not a power of two. As a stop-gap, until a better
solution is adapted, use roundup() instead.

Found by a static assertion. Compile-tested only.

Fixes: 4ffc2d89 ("uvcvideo: Register subdevices for each entity")
Signed-off-by: NNadav Amit <namit@vmware.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Trivial fix to spelling mistake in uvc_printk message

[Unwrap message string, remove unneeded curly braces]
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

debugfs_remove_recursive() accepts a NULL parameter and returns
immediately, there's no need for a NULL check in the caller.

This issue was detected with the help of Coccinelle.

[Reword commit message, address uvc_debugfs_cleanup_stream()]
Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The menu_info field of the uvc_control_mapping structure points to an
array of menu info data that are never changed by the driver. Make the
pointer const and constify the related static arrays in the driver.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Move some data to text

$ size drivers/media/usb/uvc/uvc_ctrl.o*
   text	   data	    bss	    dec	    hex	filename
  34323	   2364	      0	  36687	   8f4f	drivers/media/usb/uvc/uvc_ctrl.o.new
  28659	   8028	      0	  36687	   8f4f	drivers/media/usb/uvc/uvc_ctrl.o.old
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/platform/vicodec/vicodec-core.c:160:25: warning: variable 'q_out' set but not used [-Wunused-but-set-variable]

It's indeed not used, and it can be removed.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This fixes a documentation warning:

Documentation/output/videodev2.h.rst:6: WARNING: undefined label: v4l2-dv-fl-can-detect-reduced-fps (if the link has no caption the label must precede a section header)
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The initial sizeimage for the compressed decoder output was wrong.
The size of the output was incorrectly used to calculate the image
size, that should have been the size of the capture.

Rework the code to fix this.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

nfds depends on RLIMIT_NOFILE, not OPEN_MAX. Update the description
for cec and v4l2.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Z16 support is identical to Y16, so that's easy to add.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

When logging the current TPG state detect if we are generating
a Y'CbCr or HSV pattern and report one or the other instead of
both, which is confusing.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The documentation of the Media Controller API ioctls is missing a description
of the argp ioctl argument. Add this.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The 'config SOC_CAMERA_IMX074' is a copy-and-paste error and should be removed.
This Kconfig is for mt9t031 only.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Fix error handling of v4l2_ctrl creation by inspecting the ctrl.error flag
instead of testing for each returned value correctness.

As reported by Dan Carpenter returning PTR_ERR() on the v4l2_ctrl_new_std()
return value is also wrong, as that function return NULL on error.

While at there re-order the cleanup path to respect the operation inverse
order.

Fixes: aab7ed1c "media: i2c: Add driver for Aptina MT9V111"
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>

The pixelclock detection of the adv7842 is precise enough to detect
if the framerate is 60 Hz or 59.94 Hz (aka "reduced fps").

Implement this detection.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Currently, cobalt driver always returns 60fps in g_parm.
This patch uses the new v4l2_calc_timeperframe helper to
calculate the time per frame value.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

A new helper function was introduced to facilitate the calculation
of time per frame value whenever we have access to the full
v4l2_dv_timings structure.

This should be used only for receivers and only when there is
enough accuracy in the measured pixel clock value as well as in
the horizontal/vertical values.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add a new flag to UAPI for DV timings which, whenever set,
indicates that hardware can detect the difference between
regular FPS and 1000/1001 FPS.

This is specific to HDMI receivers. Also, it is only valid
when V4L2_DV_FL_CAN_REDUCE_FPS is set.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Document the new V4L2_DV_FL_CAN_DETECT_REDUCED_FPS flag and
update the V4L2_DV_FL_REDUCED_FPS description since it can now
also be used with receivers.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

fixes: 6949d864 ("media: ov5640: do not change mode if format or frame interval is unchanged").

Symptom was fuzzy image because of JPEG default format
not being changed according to new format selected, fix this.
Init sequence initialises format to YUV422 UYVY but
sensor->fmt initial value was set to JPEG, fix this.
Signed-off-by: NHugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

If ov772x_power_on() is unable to get GPIO rstb,
the clock is left undisabled.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: NJacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

dma_zalloc_coherent has implemented the dma_alloc_coherent() + memset(),
We prefer to dma_zalloc_coherent instead of open-codeing.
Signed-off-by: Nzhong jiang <zhongjiang@huawei.com>
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

pm_runtime_get_if_in_use() returns -EINVAL if runtime PM is disabled. This
should not be considered an error. Generally the driver has enabled
runtime PM already so getting this error due to runtime PM being disabled
will not happen.

Instead of checking for lesser or equal to zero, check for zero only.
Address this for drivers where this pattern exists.

This patch has been produced using the following command:

$ git grep -l pm_runtime_get_if_in_use -- drivers/media/i2c/ | \
  xargs perl -i -pe 's/(pm_runtime_get_if_in_use\(.*\)) \<\= 0/!$1/'
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: NTomasz Figa <tfiga@chromium.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Replace the calls to pm_runtime_get_noresume() and pm_runtime_put() with
pm_runtime_idle() in the driver's probe function. This will have the same
effect with fewer calls. pm_runtime_disable() in remove is sufficient as
the device is already in RPM_SUSPENDED state.
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Convert ov965x register access to use SCCB regmap.

Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> (I2C parts)
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Convert ov772x register access to use SCCB regmap.

Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Rosin <peda@axentia.se>
Cc: Sebastian Reichel <sebastian.reichel@collabora.co.uk>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> (I2C parts)
Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

While decoding you need to make sure you do not get values < 0
or > 255. Note that since this code will also be used in userspace
utilities the clamp macro isn't used since that is kernel-only.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Split off the decode and encode functions into a separate
source that can be reused elsewhere.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The codec source is generic and not vicodec specific. It can be used
by other drivers or userspace as well. So rename the source and header
to something more generic (codec-fwht.c/h) and prefix the defines, types
and functions with fwht_.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Exit the loop immediately once it is clear that the plane
cannot be compressed. Also clear the PCODED bit and fix the
PCODED check (it should check for the bit) in the caller code.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Simplify some blocktype/is_intra checks.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The flags field can be removed from struct vicodec_q_data.
This simplifies the flags handling elsewhere.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Add support for 4:2:2, 4:4:4 and RGB 24/32 bits formats.

This makes it a lot more useful, esp. as a simple video compression
codec for use with v4l2-ctl/qvidcap.

Note that it does not do any conversion between e.g. 4:2:2 and 4:2:0
or RGB and YUV: it still just compresses planes be they Y/U/V or R/G/B.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Instead of hardcoding the quantization parameter (or 'DEADZONE_WIDTH'
as it was called in the codec) make this configurable through two
controls: one for I frames, one for P frames.

Also allow changing these parameters and the GOP_SIZE parameter while
streaming.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Multiple files in this driver fail to build because of missing
header inclusions:

drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c: In function 'csiphy_hw_version_read':
drivers/media/platform/qcom/camss/camss-csiphy-2ph-1-0.c:31:18: error: implicit declaration of function 'readl_relaxed'; did you mean 'xchg_relaxed'? [-Werror=implicit-function-declaration]
drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c: In function 'csiphy_hw_version_read':
drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c:52:2: error: implicit declaration of function 'writel' [-Werror=implicit-function-declaration]

Add linux/io.h there and in all other files that call
readl/writel and related interfaces.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NTodor Tomov <todor.tomov@linaro.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

Use managed memory allocations for structs which are used until
the driver is removed.
Signed-off-by: NTodor Tomov <todor.tomov@linaro.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

The empty suspend/resume functions cause a build warning
when they are unused:

drivers/media/platform/qcom/camss/camss.c:1001:12: error: 'camss_runtime_resume' defined but not used [-Werror=unused-function]
drivers/media/platform/qcom/camss/camss.c:996:12: error: 'camss_runtime_suspend' defined but not used [-Werror=unused-function]

Mark them as __maybe_unused so the compiler can silently drop them.

Fixes: 02afa816 ("media: camss: Add basic runtime PM support")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NTodor Tomov <todor.tomov@linaro.org>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

When less than 3 bytes are written to the device, memcpy is called with
negative array size which leads to buffer overflow and kernel panic. This
patch adds a condition and returns -EOPNOTSUPP instead.
Fixes bugzilla issue 64871

[mchehab+samsung@kernel.org: fix a merge conflict and changed the
 condition to match the patch's comment, e. g. len == 3 could
 also be valid]
Signed-off-by: NJozef Balga <jozef.balga@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>

This fixes this warning:

Documentation/media/uapi/dvb/video_function_calls.rst:9: WARNING: toctree contains
reference to nonexisting document 'uapi/dvb/video-set-attributes'
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>