Fixed handling of 802.3ad LACPDUs.  Do not byte swap data in
place in the packet.  Updated nomenclature of "__ntohs_lacpdu" to be
"htons"; it was previously used for both ntohs and htons operations, but
only called ntohs functions.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

	Add logic to check ARP request / reply packets used for ARP
monitor link integrity checking.

	The current method simply examines the slave device to see if it
has sent and received traffic; this can be fooled by extraneous traffic.
For example, if multiple hosts running bonding are behind a common
switch, the probe traffic from the multiple instances of bonding will
update the tx/rx times on each other's slave devices.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

When a bonding netdevice is admin-ed down it loses the slaves
attributes (set via ifenslave). This is not consistent with other
behavior of netdevices (example a qdisc attached to a netdevice doesnt
disappear or an attached IP address etc).
The included patch fixes this. Ive tested by ifenslaving, downing the
bond, checking /proc and making sure it still has the slaves, up-ing the
bond and making sure things continue to work.

Jay/Bonding folks if you are ok with it, just ACK it or include it in
your tree etc. Otherwise we can discuss.
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add priv_flag to specifically identify bonding-involved devices.  Needed
because IFF_MASTER is an unreliable identifier (vlan interfaces above bonding
will inherit IFF_MASTER).  Misidentification of devices would cause
notifier events for other devices to be erroneously processed by bonding,
causing various havoc.

Bug discovered by Martin Papik <martin.papik@ipsec.info>; this patch is
modified from his original.
Signed-off-by: NMartin Papik <martin.papik@ipsec.info>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The bonding driver fails to adjust its hard_header_len when enslaving
interfaces.  Whenever an interface with a hard_header_len greater than the
ETH_HLEN default is enslaved, the potential for an oops exists, and if the
oops happens while responding to an arp request, for example, the system
panics.  GIANFAR devices may use an extended hard_header for VLAN or
hardware checksumming.  Enslaving such a device and then transmitting over
it causes a kernel panic.

Patch modified from submitter's original, but submitter agreed with this
patch in private email.
Signed-off-by: NMark Huth <mhuth@mvista.com>
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Remove unneeded test for NULL.  Reported by Thomas Dillig
<tdillig@stanford.edu> and Isil Dillig <isil@stanford.edu> via Stephen
Hemminger <shemminger@osdl.org>.
Signed-off-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Though link_failure_count is type unsigned int, this value is outputted to
/proc/net/bonding/bondX file using "%d" instead of "%u".

The attached patch fixes this problem.
Signed-off-by: NKenzo Iwami <k-iwami@cj.jp.nec.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The value of "downdelay/miimon" and "updelay/miimon" are stored in
slave->delay. The type of downdelay, updelay, and miimon are all int.
However, slave->delay is type short, and it is not possible to store the
value of "downdelay/miimon" or "updelay/miimon" in some cases. (For example,
miimon=1 downdelay=32768)

The attached patch fixes this problem.
Signed-off-by: NKenzo Iwami <k-iwami@cj.jp.nec.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Allow channel bonding to enslave a 10 Gig adapter without errors.
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Acked-by: NJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Noticed by Yoichi Yuasa.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Add support for older fiber versions of the SysKonnect board. These chipsets
use an internal PHY so they require special handling. The older sk98lin
driver already supported these
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

There seems to be a possible NULL pointer deref bug in
drivers/net/forcedeth.c::nv_loopback_test().  If dev_alloc_skb() fails, the
next line will call skb_put() with a NULL first argument which it'll then
try to deref - kaboom: a NULL pointer deref.  Found by coverity (#1337).
Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com>
Cc: Ayaz Abdulla <aabdulla@nvidia.com>
Cc: Manfred Spraul <manfred@colorfullife.com>
Cc: Stephen Hemminger <shemminger@osdl.org>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

While checking gcc 4.1 -Wextra warnings, I stumbled across the following
two warnings:

drivers/net/phy/phy_device.c:528: warning: comparison of unsigned expression < 0 is always false
drivers/net/phy/phy_device.c:546: warning: comparison of unsigned expression < 0 is always false

Since phy_read() returns an integer and can return negative values, it seems
to me the best way to get proper error handling working again is to make val
an int.  Currently it is an u32, so the < 0 check always fails.
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NMichal Piotrowski <michal.k.k.piotrowski@gmail.com>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Jes Sorensen <jes@trained-monkey.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

We need to specify a Versatile-specific SMC_IRQ_FLAGS value or the new
generic IRQ layer will complain thusly:

No IRQF_TRIGGER set_type function for IRQ 25 (<NULL>)
Signed-off-by: NDeepak Saxena <dsaxena@plexity.net>
Cc: Jeff Garzik <jeff@garzik.org>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Nicolas Pitre <nico@cam.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

ql3xxx_probe() does ioremap and stores result in ->mem_map_registers.
On failure exit it does iounmap() of the same thing.

OTOH, ql3xxx_remove() does iounmap() of ->mmap_virt_base which is
 (a) never assigned and
 (b) never used other than in that iounmap() call.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

the driver is still shite, though...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add the ethtool -S (show statistics) feature to the Spidernet ethernet
driver.  I have tested it extensively and believe it is ready to be
applied.
Signed-off-by: NJames K Lewis <jklewis@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Code for the EV96100 evaluation board hasn't compiled since at least
November 15, 2003, so it is being deleted as of 2.6.18 due to lack of
a user base.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

No 64-bit PPC_MULTIPLATFORM platforms use the mv643xx_eth driver,
so build it only on PPC32.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Acked-by: NSven Luther <sl@bplan-gmbh.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

The Cirrus Logic ep93xx is an ARM SoC that includes an ethernet MAC
-- this patch adds a driver for that ethernet MAC.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Convert the pci_device_ids to PCI_DEVICE() macro.  Saves 1.5k in the
sourcefile.
Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de>
Acked-by: NMichael Chan <mchan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for a SoHard PCI ARCnet card.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Several IR drivers used "for (i = 0; i < 4; i++)" to walk their
dev_self[] table.  Better to use ARRAY_SIZE().  And fix ali-ircc so it
won't run off the end if we find too many adapters.
Signed-off-by: NBjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Constify largish areas of firmware data in Tigon3 ethernet driver.

non-const:

lsmod:
tg3                   101404  0

objdump -x:
.rodata 000003e8
.data 00004a0c

ls -l:
-rw-r--r-- 1 root root 114404 2006-08-19 21:36 drivers/net/tg3.ko

const:

lsmod:
tg3                   101404  0

objdump -x:
.rodata 000042c8
.data 00000b4c

ls -l:
-rw-r--r-- 1 root root 114532 2006-08-19 21:06 drivers/net/tg3.ko
Signed-off-by: NAndreas Mohr <andi@lisas.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace CHECKSUM_HW by CHECKSUM_PARTIAL (for outgoing packets, whose
checksum still needs to be completed) and CHECKSUM_COMPLETE (for
incoming packets, device supplied full checksum).

Patch originally from Herbert Xu, updated by myself for 2.6.18-rc3.
Signed-off-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The last minute fix submitted by the author fixed a bug, but
broke the driver build.

Noticed by Al Viro, since I can't build on said platform.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

inside #if 0'd code, but it bugged me.

Really, we should probably just delete the driver.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch converts all users to use the new crypto_comp type and the
crypto_has_* functions.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts all remaining crypto_digest users to use the new
crypto_hash interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts all remaining users to use the new block cipher type
where applicable.  It also changes all simple cipher operations to use
the new encrypt_one/decrypt_one interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Reported by Matt Bockol <mbockol@carleton.edu> to make
its LOM (MSI 965 Neo) work.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

Signed-off-by: NJeff Garzik <jeff@garzik.org>

On powerpc and ppc, insl_ns and insl are identical as are outsl_ns and
outsl, so remove the conditional use of insl_ns and outsl_ns.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

We want the pci devices ref counted against hotplug.
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Hi Jeff,

sorry to bother you again. We figured out that the readq function we
included in the eHEA patch we sent yesterday to access eHEA registers
is defined as little endian on POWER. This collides with our adapter.
We talked to some PPC people who told us there is a discussion going
on about new access functions. We were told to use __raw_readq /
__raw_writeq for now.

This patch fixes this bug found by our internal tests today.
Please apply this small patch on the latest patch we sent you yesterday.
If it is easier for you I can also give you the entire eHEA patch again.

sorry and thanks a lot,
Jan-Bernd
Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com>

 drivers/net/ehea/ehea.h    |    2 +-
 drivers/net/ehea/ehea_hw.h |   11 ++++++++---
 2 files changed, 9 insertions(+), 4 deletions(-)
Signed-off-by: NJeff Garzik <jeff@garzik.org>