Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 18 6月, 2016 7 次提交
  3. 09 6月, 2016 2 次提交
  5. 06 6月, 2016 9 次提交
  7. 04 6月, 2016 1 次提交
    • C
      Btrfs: deal with duplciates during extent_map insertion in btrfs_get_extent · 8dff9c85
      由 Chris Mason 提交于 
      When dealing with inline extents, btrfs_get_extent will incorrectly try
to insert a duplicate extent_map.  The dup hits -EEXIST from
add_extent_map, but then we try to merge with the existing one and end
up trying to insert a zero length extent_map.

This actually works most of the time, except when there are extent maps
past the end of the inline extent.  rocksdb will trigger this sometimes
because it preallocates an extent and then truncates down.

Josef made a script to trigger with xfs_io:

	#!/bin/bash

	xfs_io -f -c "pwrite 0 1000" inline
	xfs_io -c "falloc -k 4k 1M" inline
	xfs_io -c "pread 0 1000" -c "fadvise -d 0 1000" -c "pread 0 1000" inline
	xfs_io -c "fadvise -d 0 1000" inline
	cat inline

You'll get EIOs trying to read inline after this because add_extent_map
is returning EEXIST
Signed-off-by: NChris Mason <clm@fb.com>
      8dff9c85
  9. 03 6月, 2016 3 次提交
  11. 02 6月, 2016 1 次提交
  13. 01 6月, 2016 1 次提交
  15. 31 5月, 2016 2 次提交
    • F
      Btrfs: fix race between device replace and read repair · b5de8d0d
      由 Filipe Manana 提交于 
      While we are finishing a device replace operation we can have a concurrent
task trying to do a read repair operation, in which case it will call
btrfs_map_block() to get a struct btrfs_bio which can have a stripe that
points to the source device of the device replace operation. This allows
for the read repair task to dereference the stripe's device pointer after
the device replace operation has freed the source device, resulting in
an invalid memory access. This is similar to the problem solved by my
previous patch in the same series and named "Btrfs: fix race between
device replace and discard".

So fix this by surrounding the call to btrfs_map_block() and the code
that uses the returned struct btrfs_bio with calls to
btrfs_bio_counter_inc_blocked() and btrfs_bio_counter_dec(), giving the
proper serialization with the finishing phase of the device replace
operation.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      b5de8d0d
    • F
      Btrfs: fix race between device replace and discard · 2999241d
      由 Filipe Manana 提交于 
      While we are finishing a device replace operation, we can make a discard
operation (fs mounted with -o discard) do an invalid memory access like
the one reported by the following trace:

[ 3206.384654] general protection fault: 0000 [#1] PREEMPT SMP
[ 3206.387520] Modules linked in: dm_mod btrfs crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis psmouse tpm ppdev sg parport_pc evdev i2c_piix4 parport
processor serio_raw i2c_core pcspkr button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom ata_generic sd_mod virtio_scsi ata_piix libata virtio_pci
virtio_ring scsi_mod e1000 virtio floppy [last unloaded: btrfs]
[ 3206.388595] CPU: 14 PID: 29194 Comm: fsstress Not tainted 4.6.0-rc7-btrfs-next-29+ #1
[ 3206.388595] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[ 3206.388595] task: ffff88017ace0100 ti: ffff880171b98000 task.ti: ffff880171b98000
[ 3206.388595] RIP: 0010:[<ffffffff8124d233>]  [<ffffffff8124d233>] blkdev_issue_discard+0x5c/0x2a7
[ 3206.388595] RSP: 0018:ffff880171b9bb80  EFLAGS: 00010246
[ 3206.388595] RAX: ffff880171b9bc28 RBX: 000000000090d000 RCX: 0000000000000000
[ 3206.388595] RDX: ffffffff82fa1b48 RSI: ffffffff8179f46c RDI: ffffffff82fa1b48
[ 3206.388595] RBP: ffff880171b9bcc0 R08: 0000000000000000 R09: 0000000000000001
[ 3206.388595] R10: ffff880171b9bce0 R11: 000000000090f000 R12: ffff880171b9bbe8
[ 3206.388595] R13: 0000000000000010 R14: 0000000000004868 R15: 6b6b6b6b6b6b6b6b
[ 3206.388595] FS:  00007f6182e4e700(0000) GS:ffff88023fdc0000(0000) knlGS:0000000000000000
[ 3206.388595] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 3206.388595] CR2: 00007f617c2bbb18 CR3: 000000017ad9c000 CR4: 00000000000006e0
[ 3206.388595] Stack:
[ 3206.388595]  0000000000004878 0000000000000000 0000000002400040 0000000000000000
[ 3206.388595]  0000000000000000 ffff880171b9bbe8 ffff880171b9bbb0 ffff880171b9bbb0
[ 3206.388595]  ffff880171b9bbc0 ffff880171b9bbc0 ffff880171b9bbd0 ffff880171b9bbd0
[ 3206.388595] Call Trace:
[ 3206.388595]  [<ffffffffa042899e>] btrfs_issue_discard+0x12f/0x143 [btrfs]
[ 3206.388595]  [<ffffffffa042899e>] ? btrfs_issue_discard+0x12f/0x143 [btrfs]
[ 3206.388595]  [<ffffffffa042e862>] btrfs_discard_extent+0x87/0xde [btrfs]
[ 3206.388595]  [<ffffffffa04303b5>] btrfs_finish_extent_commit+0xb2/0x1df [btrfs]
[ 3206.388595]  [<ffffffff8149c246>] ? __mutex_unlock_slowpath+0x150/0x15b
[ 3206.388595]  [<ffffffffa04464c4>] btrfs_commit_transaction+0x7fc/0x980 [btrfs]
[ 3206.388595]  [<ffffffff8149c246>] ? __mutex_unlock_slowpath+0x150/0x15b
[ 3206.388595]  [<ffffffffa0459af6>] btrfs_sync_file+0x38f/0x428 [btrfs]
[ 3206.388595]  [<ffffffff811a8292>] vfs_fsync_range+0x8c/0x9e
[ 3206.388595]  [<ffffffff811a82c0>] vfs_fsync+0x1c/0x1e
[ 3206.388595]  [<ffffffff811a8417>] do_fsync+0x31/0x4a
[ 3206.388595]  [<ffffffff811a8637>] SyS_fsync+0x10/0x14
[ 3206.388595]  [<ffffffff8149e025>] entry_SYSCALL_64_fastpath+0x18/0xa8
[ 3206.388595]  [<ffffffff81100c6b>] ? time_hardirqs_off+0x9/0x14
[ 3206.388595]  [<ffffffff8108e87d>] ? trace_hardirqs_off_caller+0x1f/0xaa

This happens because when we call btrfs_map_block() from
btrfs_discard_extent() to get a btrfs_bio structure, the device replace
operation has not finished yet, but before we use the device of one of the
stripes from the returned btrfs_bio structure, the device object is freed.

This is illustrated by the following diagram.

            CPU 1                                                  CPU 2

 btrfs_dev_replace_start()

 (...)

 btrfs_dev_replace_finishing()

   btrfs_start_transaction()
   btrfs_commit_transaction()

   (...)

                                                            btrfs_sync_file()
                                                              btrfs_start_transaction()

                                                              (...)

                                                              btrfs_commit_transaction()
                                                                btrfs_finish_extent_commit()
                                                                  btrfs_discard_extent()
                                                                    btrfs_map_block()
                                                                      --> returns a struct btrfs_bio
                                                                          with a stripe that has a
                                                                          device field pointing to
                                                                          source device of the replace
                                                                          operation (the device that
                                                                          is being replaced)

   mutex_lock(&uuid_mutex)
   mutex_lock(&fs_info->fs_devices->device_list_mutex)
   mutex_lock(&fs_info->chunk_mutex)

   btrfs_dev_replace_update_device_in_mapping_tree()
     --> iterates the mapping tree and for each
         extent map that has a stripe pointing to
         the source device, it updates the stripe
         to point to the target device instead

   btrfs_rm_dev_replace_blocked()
     --> waits for fs_info->bio_counter to go down to 0

   btrfs_rm_dev_replace_remove_srcdev()
     --> removes source device from the list of devices

   mutex_unlock(&fs_info->chunk_mutex)
   mutex_unlock(&fs_info->fs_devices->device_list_mutex)
   mutex_unlock(&uuid_mutex)

   btrfs_rm_dev_replace_free_srcdev()
     --> frees the source device

                                                                    --> iterates over all stripes
                                                                        of the returned struct
                                                                        btrfs_bio
                                                                    --> for each stripe it
                                                                        dereferences its device
                                                                        pointer
                                                                        --> it ends up finding a
                                                                            pointer to the device
                                                                            used as the source
                                                                            device for the replace
                                                                            operation and that was
                                                                            already freed

So fix this by surrounding the call to btrfs_map_block(), and the code
that uses the returned struct btrfs_bio, with calls to
btrfs_bio_counter_inc_blocked() and btrfs_bio_counter_dec(), so that
the finishing phase of the device replace operation blocks until the
the bio counter decreases to zero before it frees the source device.
This is the same approach we do at btrfs_map_bio() for example.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      2999241d
  17. 30 5月, 2016 7 次提交
    • F
      Btrfs: fix race between device replace and chunk allocation · 22ab04e8
      由 Filipe Manana 提交于 
      While iterating and copying extents from the source device, the device
replace code keeps adjusting a left cursor that is used to make sure that
once we finish processing a device extent, any future writes to extents
from the corresponding block group will get into both the source and
target devices. This left cursor is also used for resuming the device
replace operation at mount time.

However using this left cursor to decide whether writes go into both
devices or only the source device is not enough to guarantee we don't
miss copying extents into the target device. There are two cases where
the current approach fails. The first one is related to when there are
holes in the device and they get allocated for new block groups while
the device replace operation is iterating the device extents (more on
this explained below). The second one is that when that loop over the
device extents finishes, we start dellaloc, wait for all ordered extents
and then commit the current transaction, we might have got new block
groups allocated that are now using a device extent that has an offset
greater then or equals to the value of the left cursor, in which case
writes to extents belonging to these new block groups will get issued
only to the source device.

For the first case where the current approach of using a left cursor
fails, consider the source device currently has the following layout:

  [ extent bg A ] [ hole, unallocated space ] [extent bg B ]
  3Gb             4Gb                         5Gb

While we are iterating the device extents from the source device using
the commit root of the device tree, the following happens:

        CPU 1                                            CPU 2

                      <we are at transaction N>

  scrub_enumerate_chunks()
    --> searches the device tree for
        extents belonging to the source
        device using the device tree's
        commit root
    --> 1st iteration finds extent belonging to
        block group A

        --> sets block group A to RO mode
            (btrfs_inc_block_group_ro)

        --> sets cursor left to found_key.offset
            which is 3Gb

        --> scrub_chunk() starts
            copies all allocated extents from
            block group's A stripe at source
            device into target device

                                                           btrfs_alloc_chunk()
                                                             --> allocates device extent
                                                                 in the range [4Gb, 5Gb[
                                                                 from the source device for
                                                                 a new block group C

                                                           extent allocated from block
                                                           group C for a direct IO,
                                                           buffered write or btree node/leaf

                                                           extent is written to, perhaps
                                                           in response to a writepages()
                                                           call from the VM or directly
                                                           through direct IO

                                                           the write is made only against
                                                           the source device and not against
                                                           the target device because the
                                                           extent's offset is in the interval
                                                           [4Gb, 5Gb[ which is larger then
                                                           the value of cursor_left (3Gb)

        --> scrub_chunks() finishes

        --> updates left cursor from 3Gb to
            4Gb

        --> btrfs_dec_block_group_ro() sets
            block group A back to RW mode

                             <we are still at transaction N>

    --> 2nd iteration finds extent belonging to
        block group B - it did not find the new
        extent in the range [4Gb, 5Gb[ for block
        group C because we are using the device
        tree's commit root or even because the
        block group's items are not all yet
        inserted in the respective btrees, that is,
        the block group is still attached to some
        transaction handle's new_bgs list and
        btrfs_create_pending_block_groups() was
        not called yet against that transaction
        handle, so the device extent items were
        not yet inserted into the devices tree

                             <we are still at transaction N>

        --> so we end not copying anything from the newly
            allocated device extent from the source device
            to the target device

So fix this by making __btrfs_map_block() always redirect writes to the
target device as well, independently of the left cursor's value. With
this change the left cursor is now used only for the purpose of tracking
progress and allow a mount operation to resume a device replace.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      22ab04e8
    • F
      Btrfs: fix race setting block group back to RW mode during device replace · 1a1a8b73
      由 Filipe Manana 提交于 
      After it finishes processing a device extent, the device replace code sets
back the block group to RW mode and then after that it sets the left cursor
to match the logical end address of the block group, so that future writes
into extents belonging to the block group go both the source (old) and
target (new) devices. However from the moment we turn the block group
back to RW mode we have a short time window, that lasts until we update
the left cursor's value, where extents can be allocated from the block
group and written to, in which case they will not be copied/written to
the target (new) device. Fix this by updating the left cursor's value
before turning the block group back to RW mode.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      1a1a8b73
    • F
      Btrfs: fix unprotected assignment of the left cursor for device replace · 81e87a73
      由 Filipe Manana 提交于 
      We were assigning new values to fields of the device replace object
without holding the respective lock after processing each device extent.
This is important for the left cursor field which can be accessed by a
concurrent task running __btrfs_map_block (which, correctly, takes the
device replace lock).
So change these fields while holding the device replace lock.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      81e87a73
    • F
      Btrfs: fix race setting block group readonly during device replace · f0e9b7d6
      由 Filipe Manana 提交于 
      When we do a device replace, for each device extent we find from the
source device, we set the corresponding block group to readonly mode to
prevent writes into it from happening while we are copying the device
extent from the source to the target device. However just before we set
the block group to readonly mode some concurrent task might have already
allocated an extent from it or decided it could perform a nocow write
into one of its extents, which can make the device replace process to
miss copying an extent since it uses the extent tree's commit root to
search for extents and only once it finishes searching for all extents
belonging to the block group it does set the left cursor to the logical
end address of the block group - this is a problem if the respective
ordered extents finish while we are searching for extents using the
extent tree's commit root and no transaction commit happens while we
are iterating the tree, since it's the delayed references created by the
ordered extents (when they complete) that insert the extent items into
the extent tree (using the non-commit root of course).
Example:

          CPU 1                                            CPU 2

 btrfs_dev_replace_start()
   btrfs_scrub_dev()
     scrub_enumerate_chunks()
       --> finds device extent belonging
           to block group X

                               <transaction N starts>

                                                      starts buffered write
                                                      against some inode

                                                      writepages is run against
                                                      that inode forcing dellaloc
                                                      to run

                                                      btrfs_writepages()
                                                        extent_writepages()
                                                          extent_write_cache_pages()
                                                            __extent_writepage()
                                                              writepage_delalloc()
                                                                run_delalloc_range()
                                                                  cow_file_range()
                                                                    btrfs_reserve_extent()
                                                                      --> allocates an extent
                                                                          from block group X
                                                                          (which is not yet
                                                                           in RO mode)
                                                                    btrfs_add_ordered_extent()
                                                                      --> creates ordered extent Y
                                                        flush_epd_write_bio()
                                                          --> bio against the extent from
                                                              block group X is submitted

       btrfs_inc_block_group_ro(bg X)
         --> sets block group X to readonly

       scrub_chunk(bg X)
         scrub_stripe(device extent from srcdev)
           --> keeps searching for extent items
               belonging to the block group using
               the extent tree's commit root
           --> it never blocks due to
               fs_info->scrub_pause_req as no
               one tries to commit transaction N
           --> copies all extents found from the
               source device into the target device
           --> finishes search loop

                                                        bio completes

                                                        ordered extent Y completes
                                                        and creates delayed data
                                                        reference which will add an
                                                        extent item to the extent
                                                        tree when run (typically
                                                        at transaction commit time)

                                                          --> so the task doing the
                                                              scrub/device replace
                                                              at CPU 1 misses this
                                                              and does not copy this
                                                              extent into the new/target
                                                              device

       btrfs_dec_block_group_ro(bg X)
         --> turns block group X back to RW mode

       dev_replace->cursor_left is set to the
       logical end offset of block group X

So fix this by waiting for all cow and nocow writes after setting a block
group to readonly mode.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      f0e9b7d6
    • F
      Btrfs: fix race between device replace and block group removal · 57ba4cb8
      由 Filipe Manana 提交于 
      When it's finishing, the device replace code iterates all extent maps
representing block group and for each one that has a stripe that refers
to the source device, it replaces its device with the target device.
However when it replaces the source device with the target device it,
the target device still has an ID of 0ULL (BTRFS_DEV_REPLACE_DEVID),
only after its ID is changed to match the one from the source device.
This leads to races with the chunk removal code that can temporarly see
a device with an ID of 0ULL and then attempt to use that ID to remove
items from the device tree and fail, causing a transaction abort:

[ 9238.594364] BTRFS info (device sdf): dev_replace from /dev/sdf (devid 3) to /dev/sde finished
[ 9238.594377] ------------[ cut here ]------------
[ 9238.594402] WARNING: CPU: 14 PID: 21566 at fs/btrfs/volumes.c:2771 btrfs_remove_chunk+0x2e5/0x793 [btrfs]
[ 9238.594403] BTRFS: Transaction aborted (error 1)
[ 9238.594416] Modules linked in: btrfs crc32c_generic acpi_cpufreq xor tpm_tis tpm raid6_pq ppdev parport_pc processor psmouse parport i2c_piix4 evdev sg i2c_core se
rio_raw pcspkr button loop autofs4 ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod ata_generic virtio_scsi ata_piix virtio_pci libata virtio_ring virtio e1000 scsi_mod fl
oppy [last unloaded: btrfs]
[ 9238.594418] CPU: 14 PID: 21566 Comm: btrfs-cleaner Not tainted 4.6.0-rc7-btrfs-next-29+ #1
[ 9238.594419] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[ 9238.594421]  0000000000000000 ffff88017f1dbc60 ffffffff8126b42c ffff88017f1dbcb0
[ 9238.594422]  0000000000000000 ffff88017f1dbca0 ffffffff81052b14 00000ad37f1dbd18
[ 9238.594423]  0000000000000001 ffff88018068a558 ffff88005c4b9c00 ffff880233f60db0
[ 9238.594424] Call Trace:
[ 9238.594428]  [<ffffffff8126b42c>] dump_stack+0x67/0x90
[ 9238.594430]  [<ffffffff81052b14>] __warn+0xc2/0xdd
[ 9238.594432]  [<ffffffff81052b7a>] warn_slowpath_fmt+0x4b/0x53
[ 9238.594434]  [<ffffffff8116c311>] ? kmem_cache_free+0x128/0x188
[ 9238.594450]  [<ffffffffa04d43f5>] btrfs_remove_chunk+0x2e5/0x793 [btrfs]
[ 9238.594452]  [<ffffffff8108e456>] ? arch_local_irq_save+0x9/0xc
[ 9238.594464]  [<ffffffffa04a26fa>] btrfs_delete_unused_bgs+0x317/0x382 [btrfs]
[ 9238.594476]  [<ffffffffa04a961d>] cleaner_kthread+0x1ad/0x1c7 [btrfs]
[ 9238.594489]  [<ffffffffa04a9470>] ? btree_invalidatepage+0x8e/0x8e [btrfs]
[ 9238.594490]  [<ffffffff8106f403>] kthread+0xd4/0xdc
[ 9238.594494]  [<ffffffff8149e242>] ret_from_fork+0x22/0x40
[ 9238.594495]  [<ffffffff8106f32f>] ? kthread_stop+0x286/0x286
[ 9238.594496] ---[ end trace 183efbe50275f059 ]---

The sequence of steps leading to this is like the following:

              CPU 1                                           CPU 2

 btrfs_dev_replace_finishing()

   at this point
   dev_replace->tgtdev->devid ==
   BTRFS_DEV_REPLACE_DEVID (0ULL)

   ...

   btrfs_start_transaction()
   btrfs_commit_transaction()

                                                     btrfs_delete_unused_bgs()
                                                       btrfs_remove_chunk()

                                                         looks up for the extent map
                                                         corresponding to the chunk

                                                         lock_chunks() (chunk_mutex)
                                                         check_system_chunk()
                                                         unlock_chunks() (chunk_mutex)

   locks fs_info->chunk_mutex

   btrfs_dev_replace_update_device_in_mapping_tree()
     --> iterates fs_info->mapping_tree and
         replaces the device in every extent
         map's map->stripes[] with
         dev_replace->tgtdev, which still has
         an id of 0ULL (BTRFS_DEV_REPLACE_DEVID)

                                                         iterates over all stripes from
                                                         the extent map

                                                           --> calls btrfs_free_dev_extent()
                                                               passing it the target device
                                                               that still has an ID of 0ULL

                                                           --> btrfs_free_dev_extent() fails
                                                             --> aborts current transaction

   finishes setting up the target device,
   namely it sets tgtdev->devid to the value
   of srcdev->devid (which is necessarily > 0)

   frees the srcdev

   unlocks fs_info->chunk_mutex

So fix this by taking the device list mutex while processing the stripes
for the chunk's extent map. This is similar to the race between device
replace and block group creation that was fixed by commit 50460e37
("Btrfs: fix race when finishing dev replace leading to transaction abort").
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      57ba4cb8
    • F
      Btrfs: fix race between readahead and device replace/removal · ce7791ff
      由 Filipe Manana 提交于 
      The list of devices is protected by the device_list_mutex and the device
replace code, in its finishing phase correctly takes that mutex before
removing the source device from that list. However the readahead code was
iterating that list without acquiring the respective mutex leading to
crashes later on due to invalid memory accesses:

[125671.831036] general protection fault: 0000 [#1] PREEMPT SMP
[125671.832129] Modules linked in: btrfs dm_flakey dm_mod crc32c_generic xor raid6_pq acpi_cpufreq tpm_tis tpm ppdev evdev parport_pc psmouse sg parport
processor ser
[125671.834973] CPU: 10 PID: 19603 Comm: kworker/u32:19 Tainted: G        W       4.6.0-rc7-btrfs-next-29+ #1
[125671.834973] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS by qemu-project.org 04/01/2014
[125671.834973] Workqueue: btrfs-readahead btrfs_readahead_helper [btrfs]
[125671.834973] task: ffff8801ac520540 ti: ffff8801ac918000 task.ti: ffff8801ac918000
[125671.834973] RIP: 0010:[<ffffffff81270479>]  [<ffffffff81270479>] __radix_tree_lookup+0x6a/0x105
[125671.834973] RSP: 0018:ffff8801ac91bc28  EFLAGS: 00010206
[125671.834973] RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b6a RCX: 0000000000000000
[125671.834973] RDX: 0000000000000000 RSI: 00000000000c1bff RDI: ffff88002ebd62a8
[125671.834973] RBP: ffff8801ac91bc70 R08: 0000000000000001 R09: 0000000000000000
[125671.834973] R10: ffff8801ac91bc70 R11: 0000000000000000 R12: ffff88002ebd62a8
[125671.834973] R13: 0000000000000000 R14: 0000000000000000 R15: 00000000000c1bff
[125671.834973] FS:  0000000000000000(0000) GS:ffff88023fd40000(0000) knlGS:0000000000000000
[125671.834973] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[125671.834973] CR2: 000000000073cae4 CR3: 00000000b7723000 CR4: 00000000000006e0
[125671.834973] Stack:
[125671.834973]  0000000000000000 ffff8801422d5600 ffff8802286bbc00 0000000000000000
[125671.834973]  0000000000000001 ffff8802286bbc00 00000000000c1bff 0000000000000000
[125671.834973]  ffff88002e639eb8 ffff8801ac91bc80 ffffffff81270541 ffff8801ac91bcb0
[125671.834973] Call Trace:
[125671.834973]  [<ffffffff81270541>] radix_tree_lookup+0xd/0xf
[125671.834973]  [<ffffffffa04ae6a6>] reada_peer_zones_set_lock+0x3e/0x60 [btrfs]
[125671.834973]  [<ffffffffa04ae8b9>] reada_pick_zone+0x29/0x103 [btrfs]
[125671.834973]  [<ffffffffa04af42f>] reada_start_machine_worker+0x129/0x2d3 [btrfs]
[125671.834973]  [<ffffffffa04880be>] btrfs_scrubparity_helper+0x185/0x3aa [btrfs]
[125671.834973]  [<ffffffffa0488341>] btrfs_readahead_helper+0xe/0x10 [btrfs]
[125671.834973]  [<ffffffff81069691>] process_one_work+0x271/0x4e9
[125671.834973]  [<ffffffff81069dda>] worker_thread+0x1eb/0x2c9
[125671.834973]  [<ffffffff81069bef>] ? rescuer_thread+0x2b3/0x2b3
[125671.834973]  [<ffffffff8106f403>] kthread+0xd4/0xdc
[125671.834973]  [<ffffffff8149e242>] ret_from_fork+0x22/0x40
[125671.834973]  [<ffffffff8106f32f>] ? kthread_stop+0x286/0x286

So fix this by taking the device_list_mutex in the readahead code. We
can't use here the lighter approach of using a rcu_read_lock() and
rcu_read_unlock() pair together with a list_for_each_entry_rcu() call
because we end up doing calls to sleeping functions (kzalloc()) in the
respective code path.
Signed-off-by: NFilipe Manana <fdmanana@suse.com>
Reviewed-by: NJosef Bacik <jbacik@fb.com>
      ce7791ff
    • V
      btrfs: Use __u64 in exported linux/btrfs.h. · 1691cf16
      由 Vinson Lee 提交于 
      This patch fixes this build error.

/usr/include/linux/btrfs.h:121:3: error: unknown type name ‘u64’
   u64 devid;
   ^~~

Fixes: 6b526ed7 ("btrfs: introduce device delete by devid")
Signed-off-by: NVinson Lee <vlee@freedesktop.org>
Signed-off-by: NDavid Sterba <dsterba@suse.com>
      1691cf16
  19. 27 5月, 2016 2 次提交
    • C
      Btrfs: fix handling of faults from btrfs_copy_from_user · 56244ef1
      由 Chris Mason 提交于 
      When btrfs_copy_from_user isn't able to copy all of the pages, we need
to adjust our accounting to reflect the work that was actually done.

Commit 2e78c927 changed around the decisions a little and we ended up
skipping the accounting adjustments some of the time.  This commit makes
sure that when we don't copy anything at all, we still hop into
the adjustments, and switches to release_bytes instead of write_bytes,
since write_bytes isn't aligned.

The accounting errors led to warnings during btrfs_destroy_inode:

[   70.847532] WARNING: CPU: 10 PID: 514 at fs/btrfs/inode.c:9350 btrfs_destroy_inode+0x2b3/0x2c0
[   70.847536] Modules linked in: i2c_piix4 virtio_net i2c_core input_leds button led_class serio_raw acpi_cpufreq sch_fq_codel autofs4 virtio_blk
[   70.847538] CPU: 10 PID: 514 Comm: umount Tainted: G        W 4.6.0-rc6_00062_g2997da1-dirty #23
[   70.847539] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.0-1.fc24 04/01/2014
[   70.847542]  0000000000000000 ffff880ff5cafab8 ffffffff8149d5e9 0000000000000202
[   70.847543]  0000000000000000 0000000000000000 0000000000000000 ffff880ff5cafb08
[   70.847547]  ffffffff8107bdfd ffff880ff5cafaf8 000024868120013d ffff880ff5cafb28
[   70.847547] Call Trace:
[   70.847550]  [<ffffffff8149d5e9>] dump_stack+0x51/0x78
[   70.847551]  [<ffffffff8107bdfd>] __warn+0xfd/0x120
[   70.847553]  [<ffffffff8107be3d>] warn_slowpath_null+0x1d/0x20
[   70.847555]  [<ffffffff8139c9e3>] btrfs_destroy_inode+0x2b3/0x2c0
[   70.847556]  [<ffffffff812003a1>] ? __destroy_inode+0x71/0x140
[   70.847558]  [<ffffffff812004b3>] destroy_inode+0x43/0x70
[   70.847559]  [<ffffffff810b7b5f>] ? wake_up_bit+0x2f/0x40
[   70.847560]  [<ffffffff81200c68>] evict+0x148/0x1d0
[   70.847562]  [<ffffffff81398ade>] ? start_transaction+0x3de/0x460
[   70.847564]  [<ffffffff81200d49>] dispose_list+0x59/0x80
[   70.847565]  [<ffffffff81201ba0>] evict_inodes+0x180/0x190
[   70.847566]  [<ffffffff812191ff>] ? __sync_filesystem+0x3f/0x50
[   70.847568]  [<ffffffff811e95f8>] generic_shutdown_super+0x48/0x100
[   70.847569]  [<ffffffff810b75c0>] ? woken_wake_function+0x20/0x20
[   70.847571]  [<ffffffff811e9796>] kill_anon_super+0x16/0x30
[   70.847573]  [<ffffffff81365cde>] btrfs_kill_super+0x1e/0x130
[   70.847574]  [<ffffffff811e99be>] deactivate_locked_super+0x4e/0x90
[   70.847576]  [<ffffffff811e9e61>] deactivate_super+0x51/0x70
[   70.847577]  [<ffffffff8120536f>] cleanup_mnt+0x3f/0x80
[   70.847579]  [<ffffffff81205402>] __cleanup_mnt+0x12/0x20
[   70.847581]  [<ffffffff81098358>] task_work_run+0x68/0xa0
[   70.847582]  [<ffffffff810022b6>] exit_to_usermode_loop+0xd6/0xe0
[   70.847583]  [<ffffffff81002e1d>] do_syscall_64+0xbd/0x170
[   70.847586]  [<ffffffff817d4dbc>] entry_SYSCALL64_slow_path+0x25/0x25

This is the test program I used to force short returns from
btrfs_copy_from_user

void *dontneed(void *arg)
{
	char *p = arg;
	int ret;

	while(1) {
		ret = madvise(p, BUFSIZE/4, MADV_DONTNEED);
		if (ret) {
			perror("madvise");
			exit(1);
		}
	}
}

int main(int ac, char **av) {
	int ret;
	int fd;
	char *filename;
	unsigned long offset;
	char *buf;
	int i;
	pthread_t tid;

	if (ac != 2) {
		fprintf(stderr, "usage: dammitdave filename\n");
		exit(1);
	}

	buf = mmap(NULL, BUFSIZE, PROT_READ|PROT_WRITE,
		   MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
	if (buf == MAP_FAILED) {
		perror("mmap");
		exit(1);
	}
	memset(buf, 'a', BUFSIZE);
	filename = av[1];

	ret = pthread_create(&tid, NULL, dontneed, buf);
	if (ret) {
		fprintf(stderr, "error %d from pthread_create\n", ret);
		exit(1);
	}

	ret = pthread_detach(tid);
	if (ret) {
		fprintf(stderr, "pthread detach failed %d\n", ret);
		exit(1);
	}

	while (1) {
		fd = open(filename, O_RDWR | O_CREAT, 0600);
		if (fd < 0) {
			perror("open");
			exit(1);
		}

		for (i = 0; i < ROUNDS; i++) {
			int this_write = BUFSIZE;

			offset = rand() % MAXSIZE;
			ret = pwrite(fd, buf, this_write, offset);
			if (ret < 0) {
				perror("pwrite");
				exit(1);
			} else if (ret != this_write) {
				fprintf(stderr, "short write to %s offset %lu ret %d\n",
					filename, offset, ret);
				exit(1);
			}
			if (i == ROUNDS - 1) {
				ret = sync_file_range(fd, offset, 4096,
				    SYNC_FILE_RANGE_WRITE);
				if (ret < 0) {
					perror("sync_file_range");
					exit(1);
				}
			}
		}
		ret = ftruncate(fd, 0);
		if (ret < 0) {
			perror("ftruncate");
			exit(1);
		}
		ret = close(fd);
		if (ret) {
			perror("close");
			exit(1);
		}
		ret = unlink(filename);
		if (ret) {
			perror("unlink");
			exit(1);
		}

	}
	return 0;
}
Signed-off-by: NChris Mason <clm@fb.com>
Reported-by: NDave Jones <dsj@fb.com>
Fixes: 2e78c927
cc: stable@vger.kernel.org # v4.6
Signed-off-by: NChris Mason <clm@fb.com>
      56244ef1
    • C
      Merge branch 'for-chris-4.7' of... · 9257b4ca
      由 Chris Mason 提交于 
      Merge branch 'for-chris-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux into for-linus-4.7
      9257b4ca
  21. 26 5月, 2016 5 次提交