Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 23 3月, 2019 1 次提交
  3. 22 3月, 2019 2 次提交
    • C
      drm/i915: Create/destroy VM (ppGTT) for use with contexts · e0695db7
      由 Chris Wilson 提交于 
      In preparation to making the ppGTT binding for a context explicit (to
facilitate reusing the same ppGTT between different contexts), allow the
user to create and destroy named ppGTT.

v2: Replace global barrier for swapping over the ppgtt and tlbs with a
local context barrier (Tvrtko)
v3: serialise with struct_mutex; it's lazy but required dammit
v4: Rewrite igt_ctx_shared_exec to be more different (aimed to be more
similarly, turned out different!)

v5: Fix up test unwind for aliasing-ppgtt (snb)
v6: Tighten language for uapi struct drm_i915_gem_vm_control.
v7: Patch the context image for runtime ppgtt switching!

Testcase: igt/gem_vm_create
Testcase: igt/gem_ctx_param/vm
Testcase: igt/gem_ctx_clone/vm
Testcase: igt/gem_ctx_shared
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190322092325.5883-2-chris@chris-wilson.co.uk
      e0695db7
    • C
      drm/i915: Flush pages on acquisition · a679f58d
      由 Chris Wilson 提交于 
      When we return pages to the system, we ensure that they are marked as
being in the CPU domain since any external access is uncontrolled and we
must assume the worst. This means that we need to always flush the pages
on acquisition if we need to use them on the GPU, and from the beginning
have used set-domain. Set-domain is overkill for the purpose as it is a
general synchronisation barrier, but our intent is to only flush the
pages being swapped in. If we move that flush into the pages acquisition
phase, we know then that when we have obj->mm.pages, they are coherent
with the GPU and need only maintain that status without resorting to
heavy handed use of set-domain.

The principle knock-on effect for userspace is through mmap-gtt
pagefaulting. Our uAPI has always implied that the GTT mmap was async
(especially as when any pagefault occurs is unpredicatable to userspace)
and so userspace had to apply explicit domain control itself
(set-domain). However, swapping is transparent to the kernel, and so on
first fault we need to acquire the pages and make them coherent for
access through the GTT. Our use of set-domain here leaks into the uABI
that the first pagefault was synchronous. This is unintentional and
baring a few igt should be unoticed, nevertheless we bump the uABI
version for mmap-gtt to reflect the change in behaviour.

Another implication of the change is that gem_create() is presumed to
create an object that is coherent with the CPU and is in the CPU write
domain, so a set-domain(CPU) following a gem_create() would be a minor
operation that merely checked whether we could allocate all pages for
the object. On applying this change, a set-domain(CPU) causes a clflush
as we acquire the pages. This will have a small impact on mesa as we move
the clflush here on !llc from execbuf time to create, but that should
have minimal performance impact as the same clflush exists but is now
done early and because of the clflush issue, userspace recycles bo and
so should resist allocating fresh objects.

Internally, the presumption that objects are created in the CPU
write-domain and remain so through writes to obj->mm.mapping is more
prevalent than I expected; but easy enough to catch and apply a manual
flush.

For the future, we should push the page flush from the central
set_pages() into the callers so that we can more finely control when it
is applied, but for now doing it one location is easier to validate, at
the cost of sometimes flushing when there is no need.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Antonio Argenziano <antonio.argenziano@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: NMatthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190321161908.8007-1-chris@chris-wilson.co.uk
      a679f58d
  5. 21 3月, 2019 4 次提交
  7. 20 3月, 2019 2 次提交
  9. 15 3月, 2019 2 次提交
  11. 14 3月, 2019 3 次提交
  13. 11 3月, 2019 1 次提交
  15. 08 3月, 2019 6 次提交
  17. 06 3月, 2019 3 次提交
  19. 05 3月, 2019 1 次提交
  21. 28 2月, 2019 3 次提交
  23. 23 2月, 2019 1 次提交
  25. 21 2月, 2019 4 次提交
  27. 20 2月, 2019 1 次提交
  29. 15 2月, 2019 1 次提交
  31. 13 2月, 2019 1 次提交
  33. 09 2月, 2019 1 次提交
    • C
      drm/i915: Revoke mmaps and prevent access to fence registers across reset · 2caffbf1
      由 Chris Wilson 提交于 
      Previously, we were able to rely on the recursive properties of
struct_mutex to allow us to serialise revoking mmaps and reacquiring the
FENCE registers with them being clobbered over a global device reset.
I then proceeded to throw out the baby with the bath water in order to
pursue a struct_mutex-less reset.

Perusing LWN for alternative strategies, the dilemma on how to serialise
access to a global resource on one side was answered by
https://lwn.net/Articles/202847/ -- Sleepable RCU:

    1  int readside(void) {
    2      int idx;
    3      rcu_read_lock();
    4	   if (nomoresrcu) {
    5          rcu_read_unlock();
    6	       return -EINVAL;
    7      }
    8	   idx = srcu_read_lock(&ss);
    9	   rcu_read_unlock();
    10	   /* SRCU read-side critical section. */
    11	   srcu_read_unlock(&ss, idx);
    12	   return 0;
    13 }
    14
    15 void cleanup(void)
    16 {
    17     nomoresrcu = 1;
    18     synchronize_rcu();
    19     synchronize_srcu(&ss);
    20     cleanup_srcu_struct(&ss);
    21 }

No more worrying about stop_machine, just an uber-complex mutex,
optimised for reads, with the overhead pushed to the rare reset path.

However, we do run the risk of a deadlock as we allocate underneath the
SRCU read lock, and the allocation may require a GPU reset, causing a
dependency cycle via the in-flight requests. We resolve that by declaring
the driver wedged and cancelling all in-flight rendering.

v2: Use expedited rcu barriers to match our earlier timing
characteristics.
v3: Try to annotate locking contexts for sparse
v4: Reduce selftest lock duration to avoid a reset deadlock with fences
v5: s/srcu/reset_backoff_srcu/
v6: Remove more stale comments

Testcase: igt/gem_mmap_gtt/hang
Fixes: eb8d0f5a ("drm/i915: Remove GPU reset dependence on struct_mutex")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190208153708.20023-2-chris@chris-wilson.co.uk
      2caffbf1
  35. 08 2月, 2019 3 次提交