- 14 9月, 2010 24 次提交
-
-
由 Guennadi Liakhovetski 提交于
The SH-Mobile HDMI controller supports two configuration modes: using pre-programmed VICs and the "external" mode - specifying video parameters explicitly. The driver already contains code, necessary to configure HDMI manually, this patch actually enables it. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
To support standard video modes, other than 720p, the HDMI PHY configuration has to be adjusted and the VIC has to be sent to the display. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Now, that we add support for multiple modes to the sh_mobile_lcdcfb driver, it has to allocate memory, sufficient for the biggest of them. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Notifier callbacks have to return either one of NOTIFY_* codes or a negative errno, converted to a suitable value by the notifier_from_errno() inline, if the notifier chain shall not be continued. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
This is a preparation for HDMI hotplug support. This patch just moves all platform defined video modes for the sh_mobile_lcdcfb driver to separate arrays and switches all users to use element 0 of that array, so, this patch doesn't introduce any functional changes and as such should not cause any regressions. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Remove an unused variable and simplify several pointer dereferences. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
This patch fixes the following two erroneous error paths: hw_usecnt is allocated with a value of 0, therefore in an early error case, calling sh_mobile_lcdc_clk_off() will wrongly conclude, that hw_usecnt has already been incremented. Then sh_mobile_lcdc_runtime_suspend() will be called, which will access uninitialised data fields and crash the kernel. sh_mobile_lcdc_stop() can be called before framebuffer has been allocated, then ch->info is NULL and dereferencing it will Oops too. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
The present SH-Mobile HDMI driver reads and parses the EDID block into a variable screeninfo object, but since it is still unable to dynamically reconfigure the framebuffer, it overwrites the EDID information with preset values again. This patch just uses a temporary variable to store the EDID timing information instead. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Guennadi Liakhovetski 提交于
Use the standard fb_videomode_to_var() instead of filling fb_var_screeninfo fields manually in, also remove a redundant memset(0). Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Add ignored device name by comment-out in INTCS. And MSIOF which has been forgotten is added Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Use evt2irq() for DMAC resources on sh7372. This makes the code easier to read and also allows adjusting the INTC base offset without breaking platform data. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Magnus Damm 提交于
Extend dip switch comments for QHD and WVGA LCD panels on AP4EVB. Similar to the Ecovec comments. Signed-off-by: NMagnus Damm <damm@opensource.se> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
Current gamut, acp, isrc1, isrc2 settings are wrong, and not necessary for now. Tested-by: NTakanari Hayama <taki@igel.co.jp> Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
由 Kuninori Morimoto 提交于
This patch modify x_plate_ohms to correct value for tsc2007, and removed un-necessary ts_get_pendown_state(). gpio_pull_up() was removed also. Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip由 Linus Torvalds 提交于
* 'sched/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: sched: Improve latencies under load by decreasing minimum scheduling granularity
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k,m68knommu: Wire up fanotify_init, fanotify_mark, and prlimit64
-
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6由 Linus Torvalds 提交于
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] fix siglock Quoth Tony: "I committed the fix for this last week prior to your -rc4 announcement reminding us to give proper "Reported-by:" credit. This one should have had: Reported-by: NTony Ernst <tee@sgi.com> and also Much-useful-investigation-and-tracing-by: NHedi Berriche <hedi@sgi.com> Much-useful-investigation-and-tracing-by: Petr Tesarik <ptesarik@novell.com>"
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: prevent possible memory corruption in cifs_demultiplex_thread cifs: eliminate some more premature cifsd exits cifs: prevent cifsd from exiting prematurely [CIFS] ntlmv2/ntlmssp remove-unused-function CalcNTLMv2_partial_mac_key cifs: eliminate redundant xdev check in cifs_rename Revert "[CIFS] Fix ntlmv2 auth with ntlmssp" Revert "missing changes during ntlmv2/ntlmssp auth and sign" Revert "Eliminate sparse warning - bad constant expression" Revert "[CIFS] Eliminate unused variable warning"
-
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: Don't use dotl version of mknod for dotu inode operations fs/9p: Use the correct dentry operations 9p: Check for NULL fid in v9fs_dir_release() fs/9p: Fix error handling in v9fs_get_sb fs/9p, net/9p: memory leak fixes
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6由 Linus Torvalds 提交于
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: dquot: do full inode dirty in allocating space
-
git://git.secretlab.ca/git/linux-2.6由 Linus Torvalds 提交于
* 'next-spi' of git://git.secretlab.ca/git/linux-2.6: spi/pl022: move probe call to subsys_initcall() powerpc/5200: mpc52xx_uart.c: Add of_node_put to avoid memory leak spi/pl022: fix APB pclk power regression on U300 spi/spi_s3c64xx: Warn if PIO transfers time out spi/s3c64xx: Fix incorrect reuse of 'val' local variable. spi/s3c64xx: Fix compilation warning spi/dw_spi: clean the cs_control code spi/dw_spi: Allow interrupt sharing spi/spi_s3c64xx: Increase dead reckoning time in wait_for_xfer() spi/spi_s3c64xx: Move to subsys_initcall() spi: free children in spi_unregister_master, not siblings gpiolib: Add 'struct gpio_chip' forward declaration for !GPIOLIB case of: Fix missing includes - ll_temac spi/spi_s3c64xx: Staticise non-exported functions spi/spi_s3c64xx: Make probe more robust against missing board config
-
由 Geert Uytterhoeven 提交于
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Acked-by: NGreg Ungerer <gerg@uclinux.org>
-
由 Ingo Molnar 提交于
Mathieu reported bad latencies with make -j10 kind of kbuild workloads - which is mostly caused by us scheduling with a too coarse granularity. Reduce the minimum granularity some more, to make sure we can meet the latency target. I got the following results (make -j10 kbuild load, average of 3 runs): vanilla: maximum latency: 38278.9 µs average latency: 7730.1 µs patched: maximum latency: 22702.1 µs average latency: 6684.8 µs Mathieu also measured it: | | * wakeup-latency.c (SIGEV_THREAD) with make -j10 | | - Mainline 2.6.35.2 kernel | | maximum latency: 45762.1 µs | average latency: 7348.6 µs | | - With only Peter's smaller min_gran (shown below): | | maximum latency: 29100.6 µs | average latency: 6684.1 µs | Reported-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Acked-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com> Suggested-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <AANLkTi=8m4g01wZPacySoF7U0PevTNVgJoZZrHiUD-pN@mail.gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 13 9月, 2010 6 次提交
-
-
由 Aneesh Kumar K.V 提交于
We should not use dotlversion for the dotu inode operations Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
We should use the cached dentry operation only if caching mode is enabled Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 jvrao 提交于
NULL fid should be handled in cases where we endup calling v9fs_dir_release() before even we instantiate the fid in filp. Signed-off-by: NVenkateswararao Jujjuri <jvrao@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Aneesh Kumar K.V 提交于
This was introduced by 7cadb63d58a932041afa3f957d5cbb6ce69dcee5 Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Latchesar Ionkov 提交于
Four memory leak fixes in the 9P code. Signed-off-by: NLatchesar Ionkov <lucho@ionkov.net> Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com>
-
由 Linus Torvalds 提交于
-
- 12 9月, 2010 6 次提交
-
-
由 Randy Dunlap 提交于
Fix docbook templates that reference files that do not contain the expected kernel-doc notation. Fixes these warnings: Warning(arch/x86/include/asm/unaligned.h): no structured comments found Warning(lib/vsprintf.c): no structured comments found These cause errors in the generated html output, like below, so drop these lines. Name arch/x86/include/asm/unaligned.h - Document generation inconsistency Oops Warning The template for this document tried to insert the structured comment from the file arch/x86/include/asm/unaligned.h at this point, but none was found. This dummy section is inserted to allow generation to continue. Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
When you don't use !E or !I but only !F, then it's very easy to miss including some functions, structs etc. in documentation. To help finding which ones were missed, allow printing out the unused ones as warnings. For example, using this on mac80211 yields a lot of warnings like this: Warning: didn't use docs for DOC: mac80211 workqueue Warning: didn't use docs for ieee80211_max_queues Warning: didn't use docs for ieee80211_bss_change Warning: didn't use docs for ieee80211_bss_conf when generating the documentation for it. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Johannes Berg 提交于
There are valid attributes that could have upper case letters, but we still want to remove, like for example __attribute__((aligned(NETDEV_ALIGN))) as encountered in the wireless code. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6由 Linus Torvalds 提交于
* 'pm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PM / Hibernate: Avoid hitting OOM during preallocation of memory PM QoS: Correct pr_debug() misuse and improve parameter checks PM: Prevent waiting forever on asynchronous resume after failing suspend
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] fix use-after-free in scsi_init_io() [SCSI] sd: fix medium-removal bug [SCSI] qla2xxx: Update version number to 8.03.04-k0. [SCSI] qla2xxx: Check for empty slot in request queue before posting Command type 6 request. [SCSI] qla2xxx: Cover UNDERRUN case where SCSI status is set. [SCSI] qla2xxx: Correctly set fw hung and complete only waiting mbx. [SCSI] qla2xxx: Reset seconds_since_last_heartbeat correctly. [SCSI] qla2xxx: make rport deletions explicit during vport removal [SCSI] qla2xxx: Fix vport delete issues [SCSI] sd, sym53c8xx: Remove warnings after vsprintf %pV introducation. [SCSI] Fix warning: zero-length gnu_printf format string [SCSI] hpsa: disable doorbell reset on reset_devices [SCSI] be2iscsi: Fix for Login failure [SCSI] fix bio.bi_rw handling
-
由 Rafael J. Wysocki 提交于
There is a problem in hibernate_preallocate_memory() that it calls preallocate_image_memory() with an argument that may be greater than the total number of available non-highmem memory pages. If that's the case, the OOM condition is guaranteed to trigger, which in turn can cause significant slowdown to occur during hibernation. To avoid that, make preallocate_image_memory() adjust its argument before calling preallocate_image_pages(), so that the total number of saveable non-highem pages left is not less than the minimum size of a hibernation image. Change hibernate_preallocate_memory() to try to allocate from highmem if the number of pages allocated by preallocate_image_memory() is too low. Modify free_unnecessary_pages() to take all possible memory allocation patterns into account. Reported-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Tested-by: NM. Vefa Bicakci <bicave@superonline.com>
-
- 11 9月, 2010 4 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (28 commits) ipheth: remove incorrect devtype to WWAN MAINTAINERS: Add CAIF sctp: fix test for end of loop KS8851: Correct RX packet allocation udp: add rehash on connect() net: blackhole route should always be recalculated ipv4: Suppress lockdep-RCU false positive in FIB trie (3) niu: Fix kernel buffer overflow for ETHTOOL_GRXCLSRLALL ipvs: fix active FTP gro: Re-fix different skb headrooms via-velocity: Turn scatter-gather support back off. ipv4: Fix reverse path filtering with multipath routing. UNIX: Do not loop forever at unix_autobind(). PATCH: b44 Handle RX FIFO overflow better (simplified) irda: off by one 3c59x: Fix deadlock in vortex_error() netfilter: discard overlapping IPv6 fragment ipv6: discard overlapping fragment net: fix tx queue selection for bridged devices implementing select_queue bonding: Fix jiffies overflow problems (again) ... Fix up trivial conflicts due to the same cgroup API thinko fix going through both Andrew and the networking tree. However, there were small differences between the two, with Andrew's version generally being the nicer one, and the one I merged first. So pick that one. Conflicts in: include/linux/cgroup.h and kernel/cgroup.c
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Kill all BKL usage.
-
由 Linus Torvalds 提交于
Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, tsc: Fix a preemption leak in restore_sched_clock_state() sched: Move sched_avg_update() to update_cpu_load()
-
由 Peter Zijlstra 提交于
Doh, a real life genuine preemption leak.. This caused a suspend failure. Reported-bisected-and-tested-by-the-invaluable: Jeff Chua <jeff.chua.linux@gmail.com> Acked-by: NSuresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Nico Schottelius <nico-linux-20100709@schottelius.org> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Florian Pritz <flo@xssn.at> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Len Brown <lenb@kernel.org> Cc: <stable@kernel.org> # Greg, please apply after: cd7240c0 ("x86, tsc, sched: Recompute cyc2ns_offset's during resume from") sleep states LKML-Reference: <1284150773.402.122.camel@laptop> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-