The device stats strings for R-Car and RZ/G2L are different.

R-Car provides 30 device stats, whereas RZ/G2L provides only 15. In
addition, RZ/G2L has stats "rx_queue_0_csum_offload_errors" instead of
"rx_queue_0_missed_errors".

Add structure variables gstrings_stats and gstrings_size to struct
ravb_hw_info, so that subsequent SoCs can be added without any code
changes in the ravb_get_strings function.
Signed-off-by: NBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NSergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

R-Car provides 30 device stats, whereas RZ/G2L provides only 15. In
addition, RZ/G2L has stats "rx_queue_0_csum_offload_errors" instead of
"rx_queue_0_missed_errors".

Replace RAVB_STATS_LEN macro with a structure variable stats_len to
struct ravb_hw_info, to support subsequent SoCs without any code changes
to the ravb_get_sset_count function.
Signed-off-by: NBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: NSergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The maximum descriptor size that can be specified on the reception side for
R-Car is 2048 bytes, whereas for RZ/G2L it is 8096.

Add the max_rx_len variable to struct ravb_hw_info for allocating different
RX skb buffer sizes for R-Car and RZ/G2L using the netdev_alloc_skb
function.
Signed-off-by: NBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

R-Car Gen2 needs a 4byte aligned address for the transmission buffer,
whereas R-Car Gen3 doesn't have any such restriction.

Add aligned_tx to struct ravb_hw_info to select the driver to choose
between aligned and unaligned tx buffers.
Signed-off-by: NBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The DMAC and EMAC blocks of Gigabit Ethernet IP found on RZ/G2L SoC are
similar to the R-Car Ethernet AVB IP. With a few changes in the driver we
can support both IPs.

This patch adds the struct ravb_hw_info to hold hw features, driver data
and function pointers to support both the IPs. It also replaces the driver
data chip type with struct ravb_hw_info by moving chip type to it.
Signed-off-by: NBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The number of TX descriptors per packet is an unsigned value and
the variable for holding this information should be unsigned.

This patch replaces the data type of num_tx_desc variable in struct
ravb_private from 'int' to 'unsigned int'.
This patch also updates the data type of local variables to unsigned int,
where the local variables are evaluated using num_tx_desc.
Signed-off-by: NBiju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: NLad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ARRAY_SIZE macro is defined to get an array's size which is
more compact and more formal in linux source. Thus, we can replace
the long sizeof(arr)/sizeof(arr[0]) with the compact ARRAY_SIZE.
Signed-off-by: NJason Wang <wangborong@cdjrlc.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/20210817121106.44189-1-wangborong@cdjrlc.comSigned-off-by: NJakub Kicinski <kuba@kernel.org>

VLAN TCI is a 16 bit field which includes Priority(3 bits),
CFI(1 bit) and VID(12 bits). Currently ntuple filters support
installing rules to steer packets based on VID only.
This patch extends that support such that filters can
be installed for entire VLAN TCI.
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a spelling mistake in a dev_info message. Fix it.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

As follow-up to the discussion with Jakub Kicinski about iavf locking
being insufficient [1] convert iavf to use mutexes instead of bitops.
The locking logic is kept as is, just a drop-in replacement of
enum iavf_critical_section_t with separate mutexes.
The only difference is that the mutexes will be destroyed before the
module is unloaded.

[1] https://lwn.net/ml/netdev/20210316150210.00007249%40intel.com/Signed-off-by: NStefan Assmann <sassmann@kpanic.de>
Tested-by: NMarek Szlosek <marek.szlosek@intel.com>
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>

On CN10K, the higher bits in the channel number represents the CPT
channel number. Mask out these higher bits in the npc configuration
to allow packets from cpt for parsing.
Signed-off-by: NVidya <vvelumuri@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The way SW can identify the number NPC counters supported by silicon
has changed for CN10K. This patch addresses this reading appropriate
registers to find out number of counters available.
Signed-off-by: NHariprasad Kelam <hkelam@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the mcam entry allocation request is from PF
and NOT a priority allocation request then allocate
low priority entries so that PF entries always have
lower priority than its VFs. This is required so
that entries with (base) MCAM match criteria have lower
priority compared to entries with (base + additional)
match criteria. This patch considers only best case
scenario where PF entries are allocated from low
priority zone if low priority zone has free space.
There are worst case scenarios like:
1. VFs allocating hundreds of MCAM entries leading to VFs
using all mid priority zone and low priority zone entries
hence no entries free from low priority zone for PF.
2. All the PFs and VFs in the system allocating and freeing
entries causing fragmentation in MCAM space and all the
entries requested by PF could not fit in low priority
zone for allocation.
This patch do not handle worst case scenarios.
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added support for setting or modifying MCAM entry count at
runtime via devlink params.

commands:
  devlink dev param show
pci/0002:02:00.0:
  name mcam_count type driver-specific
    values:
      cmode runtime value 16

  devlink dev param set pci/0002:02:00.0 name mcam_count
				value 64 cmode runtime
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Variables used for TC flow management like maximum number
of flows, number of flows installed etc are a copy of ntuple
flow management variables. Since both TC and NTUPLE are not
supported at the same time, it's better to unify these with
common variables.

This patch addresses this unification and also does cleanup of
other minor stuff wrt TC.
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Per single mailbox request a maximum of 256 MCAM entries
can be allocated. If more than 256 are being allocated, then
the mcam indices in the final list could get jumbled. Hence
sort the indices.
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add packet flow classification support for both LMAC mapped virtual
functions and loopback VFs. This patch adds supports for ntuple
offload feature.
Signed-off-by: NRakesh Babu <rsaladi2@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enabled NETIF_F_RXALL support for VF driver.
Also removed MTU range comments which are no longer valid.
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Added debug messages for various failures during probe.
This will help in quickly identifying the API where the failure
is happening.
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add appropriate error codes to be used when returning from AF
mailbox handlers due to some error condition.
Signed-off-by: NNaveen Mamindlapalli <naveenm@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When installing a flow using npc_install_flow
mailbox there are number of reasons to reject
the request like caller is not permitted,
invalid channel specified in request, flow
not supported in extraction profile and so on.
Hence define new error codes for npc flows and use
them instead of generic error codes.
Signed-off-by: NSubbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: NSunil Goutham <sgoutham@marvell.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Allow adding bond net devices to mlx5 bridge with following changes:

- Modify bridge representor code to obtain uplink represetor that belongs
to eswitch that is registered for notification. Require representor to be
in shared FDB mode. If representor is the lag master, then consider its
port as local, otherwise treat it as peer.

- Use devcom to match on paired eswitch metadata in peer FDB entries. This
is necessary for shared FDB LAG to function since packets are always
received on active eswitch instance as opposed to parent eswitch of port.

- Support for deleting peer flows when receiving
SWITCHDEV_FDB_DEL_TO_BRIDGE notification was implemented in one of previous
patches in series. Now also implement support for handling
SWITCHDEV_FDB_ADD_TO_BRIDGE which can be generated on peer by bridge update
workqueue task in LAG configuration. Refresh the flow 'lastuse' timestamp
to current jiffies when receiving such notification on eswitch that manages
the local FDB entry. This allows peer entries to prevent ageing of the FDB.
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Allow connectivity between representors of different eswitch instances that
are attached to same bridge when merged_eswitch capability is enabled. Add
ports of peer eswitch to bridge instance and mark them with
MLX5_ESW_BRIDGE_PORT_FLAG_PEER. Mark FDBs offloaded on peer ports with
MLX5_ESW_BRIDGE_FLAG_PEER flag. Such FDBs can only be aged out on their
local eswitch instance, which then sends SWITCHDEV_FDB_DEL_TO_BRIDGE event.
Listen to the event on mlx5 bridge implementation and delete peer FDBs in
event handler.
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

SWITCHDEV_FDB_DEL_TO_BRIDGE notification is generated in multiple places in
bridge code. Following patch in series changes the condition for the
notification. Extract the notification into dedicated helper function
mlx5_esw_bridge_fdb_del_notify() to only modify it in single place in the
future changes.
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Following patches in series allow traffic between vports of different
eswitch instances, which requires addressing bridge port by
vport_num+esw_owner_vhca_id pair since vport_num is only unique
per-eswitch. As a preparation, extend struct mlx5_esw_bridge_port with
'esw_owner_vhca_id' field and use it as part of key for
mlx5_esw_bridge->vports xarray.

With this change we can't rely on switchdev_handle_port_obj_add() helper to
get mlx5 representor from stacked device because we need specifically
representor from parent eswitch that registered the callback to obtain
correct esw_owner_vhca_id. The helper doesn't allow passing additional
parameters to predicate function and doesn't provide access to the notifier
block to obtain eswitch through br_offloads. Implement custom helpers to
obtain mlx5 representor and use them in
mlx5_esw_bridge_port_obj_{add|del|attr_set}() implementations.

Remove direct pointer to parent bridge from struct mlx5_vport as it is no
longer needed.
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Following patches in series will pass bond device to bridge, which means
the code can't assume the device is mlx5 representor. Moreover, the core
device can be easily obtained from eswitch instance, so there is no reason
for more complex code that obtains struct mlx5_priv from net_device in
order to use its mdev. Refactor the code to use esw->dev instead of
priv->mdev.
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Refactor mlx5_esw_bridge_vport_link() to release the bridge instance if
mlx5_esw_bridge_vport_init() returned an error instead of relying on it to
release the bridge. This improves the design because object instance is
taken and released in same layer and simplifies following patches that add
more logic to mlx5_esw_bridge_vport_link().
Signed-off-by: NVlad Buslov <vladbu@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Reviewed-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Add support for MQPRIO channel mode, in which a partition to TCs
is defined over the channels. We allow partitions with contiguous
queue indices, with no holes within. We do not allow modification
to the num of channels while this MQPRIO mode is active.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Add handling for failures in netdev_set_num_tc().
Let mlx5e_netdev_set_tcs return an int.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

This is in preparation for supporting MQPRIO CHANNEL mode in
downstream patch, in addition to DCB mode that's supported today.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Abstract the MQPRIO params into a struct.
Use a getter for DCB mode num_tcs.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Extend the existing flow classification support, to steer
flows not only directly to a receive ring, but also into
the new RSS contexts.

Create needed TIR objects on demand, and hold reference
on the RSS context.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Add support to multiple RSS contexts. Resources of the non-default
RSS contexts are allocated and created on demand. Each RSS context
can be controlled and configured separately, via the implemented
ethtool ops. Here we limit the num of total contexts to 16.

We do not enforce any kind of new limitation over the indirection table
content. More specifically, two separate contexts can be configured to
fully or partially point to the same set of receive rings.

The default RSS context (index 0) is created with its full set of TIRs.
All other contexts are created with an empty set, then TIRs are added
upon first usage when steering rules are added.
We use a reference counting mechanism to make sure an RSS context is
not removed before the rules pointing to it.

Block ethtool set_channels operations when multiple RSS contexts exist,
as currently the kernel doesn't protect against inconsistent channels
configs that break non-default RSS contexts.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Move from static to dynamic memory allocations for TIR.
This is in preparation to supporting on-demand TIR operations in
downstream patches, where every RSS context will be init with an
empty set of TIRs.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Code related to RSS is now encapsulated into a dedicated object and put
into new files en/rss.{c,h}. All usages are converted.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Bring all fields that define and maintain RSS behavior together
into a new structure.
Align all usages with this new structure. Keep it hidden within
rx_res.c.
This helps supporting multiple RSS contexts in downstream patch.

Use dynamic allocations for the RSS context.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Take TIR control operations in rx_res into functions.
This is in preparation to supporting on-demand TIR operations in
downstream patches.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

All calls to mlx5e_rx_res_rss_set_indir_uniform() occur while the RSS
state is inactive, i.e. the RQT is pointing to the drop RQ, not to the
channels' RQs.
It means that the "apply" part of the function is not called.
Remove this part from the function, and document the change. It will be
useful for next patches in the series, allows code simplifications when
multiple RSS contexts are introduced.
Signed-off-by: NTariq Toukan <tariqt@nvidia.com>
Reviewed-by: NMaxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

In order to know the reason of link up failure, add supporting ethtool
extended link state. Driver reads the link status code from firmware if
in link down state and converts it to ethtool extended link state.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Add a new file hns3_ethtool.h, and move struct type definitions from
hns3_ethtool.c to hns3_ethtool.h.
Signed-off-by: NGuangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>