- 10 9月, 2020 4 次提交
-
-
由 Jason Gunthorpe 提交于
Generally drivers should be using this core helper to split up the umem into DMA pages. These drivers are all probably wrong in some way to pass PAGE_SIZE in as the HW page size. Either the driver doesn't support other page sizes and it should use 4096, or the driver does support other page sizes and should use ib_umem_find_best_pgsz() to select the best HW pages size of the HW supported set. The only case it could be correct is if the HW has a global setting for PAGE_SIZE set at driver initialization time. Link: https://lore.kernel.org/r/5-v2-270386b7e60b+28f4-umem_1_jgg@nvidia.comSigned-off-by: NJason Gunthorpe <jgg@nvidia.com>
-
由 Leon Romanovsky 提交于
Like any other verbs objects, CQ shouldn't fail during destroy, but mlx5_ib didn't follow this contract with mixed IB verbs objects with DEVX. Such mix causes to the situation where FW and kernel are fully interdependent on the reference counting of each side. Kernel verbs and drivers that don't have DEVX flows shouldn't fail. Fixes: e39afe3d ("RDMA: Convert CQ allocations to be under core responsibility") Link: https://lore.kernel.org/r/20200907120921.476363-7-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
-
由 Leon Romanovsky 提交于
In similar way to other IB objects, restore the ability to return error on SRQ destroy. Strictly speaking, this change is not necessary, and provided here to ensure a symmetrical interface like other destroy functions. Fixes: 68e326de ("RDMA: Handle SRQ allocations by IB/core") Link: https://lore.kernel.org/r/20200907120921.476363-5-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
-
由 Leon Romanovsky 提交于
The IB verbs objects are counted by the kernel and ib_core ensures that deallocate PD will success so it will be called once all other objects that depends on PD will be released. This is achieved by managing various reference counters on such objects. The mlx5 driver didn't follow this standard flow when allowed DEVX objects that are not managed by ib_core to be interleaved with the ones under ib_core responsibility. In such interleaved scenarios deallocate command can fail and ib_core will leave uobject in internal DB and attempt to clean it later to free resources anyway. This change partially restores returned value from dealloc_pd() for all drivers, but keeping in mind that non-DEVX devices and kernel verbs paths shouldn't fail. Fixes: 21a428a0 ("RDMA: Handle PD allocations by IB/core") Link: https://lore.kernel.org/r/20200907120921.476363-2-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
-
- 24 8月, 2020 1 次提交
-
-
由 Gustavo A. R. Silva 提交于
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
-
- 07 7月, 2020 1 次提交
-
-
由 Gal Pressman 提交于
Allocating an MR flow can only be initiated by kernel users, and not from userspace so a udata parameter is redundant. Link: https://lore.kernel.org/r/20200706120343.10816-4-galpress@amazon.comSigned-off-by: NGal Pressman <galpress@amazon.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>
-
- 03 6月, 2020 2 次提交
-
-
由 Jason Gunthorpe 提交于
Now that FMR support is gone, this attribute can be deleted from all places. Link: https://lore.kernel.org/r/13-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.comReviewed-by: NMax Gurtovoy <maxg@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
Now that FMR support is gone, this attribute can be deleted from all places. Link: https://lore.kernel.org/r/12-v3-f58e6669d5d3+2cf-fmr_removal_jgg@mellanox.comReviewed-by: NMax Gurtovoy <maxg@mellanox.com> Reviewed-by: NBernard Metzler <bmt@zurich.ibm.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 05 3月, 2020 1 次提交
-
-
由 Kamal Heib 提交于
The proper return code is "-EOPNOTSUPP" when the requested QP type is not supported by the provider. Link: https://lore.kernel.org/r/20200130082049.463-1-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 16 1月, 2020 1 次提交
-
-
由 Moni Shoua 提交于
So far the assumption was that ib_umem_get() and ib_umem_odp_get() are called from flows that start in UVERBS and therefore has a user context. This assumption restricts flows that are initiated by ULPs and need the service that ib_umem_get() provides. This patch changes ib_umem_get() and ib_umem_odp_get() to get IB device directly by relying on the fact that both UVERBS and ULPs sets that field correctly. Reviewed-by: NGuy Levi <guyle@mellanox.com> Signed-off-by: NMoni Shoua <monis@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
-
- 17 11月, 2019 1 次提交
-
-
由 Christoph Hellwig 提交于
The argument is always ignored, so remove it. Link: https://lore.kernel.org/r/20191113073214.9514-3-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NJason Gunthorpe <jgg@mellanox.com> Acked-by: NMichal Kalderon <michal.kalderon@marvell.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 07 11月, 2019 1 次提交
-
-
由 Kamal Heib 提交于
There is no need to return always zero for function which is not supported. Fixes: fe2caefc ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Link: https://lore.kernel.org/r/20191028155931.1114-4-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com> Reviewed-by: NJason Gunthorpe <jgg@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 12 8月, 2019 1 次提交
-
-
由 Kamal Heib 提交于
In order to improve readability, add ib_port_phys_state enum to replace the use of magic numbers. Signed-off-by: NKamal Heib <kamalheib1@gmail.com> Reviewed-by: NAndrew Boyer <aboyer@tobark.org> Acked-by: NMichal Kalderon <michal.kalderon@marvell.com> Acked-by: NBernard Metzler <bmt@zurich.ibm.com> Link: https://lore.kernel.org/r/20190807103138.17219-2-kamalheib1@gmail.comSigned-off-by: NDoug Ledford <dledford@redhat.com>
-
- 21 6月, 2019 1 次提交
-
-
由 Leon Romanovsky 提交于
Update ib_umem_release() to behave similarly to kfree() and allow submitting NULL pointer as safe input to this function. Fixes: a52c8e24 ("RDMA: Clean destroy CQ in drivers do not return errors") Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 12 6月, 2019 2 次提交
-
-
由 Leon Romanovsky 提交于
Ensure that CQ is allocated and freed by IB/core and not by drivers. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Acked-by: NGal Pressman <galpress@amazon.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Tested-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Leon Romanovsky 提交于
Like all other destroy commands, .destroy_cq() call is not supposed to fail. In all flows, the attempt to return earlier caused to memory leaks. This patch converts .destroy_cq() to do not return any errors. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Acked-by: NGal Pressman <galpress@amazon.com> Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 09 4月, 2019 2 次提交
-
-
由 Jason Gunthorpe 提交于
Drivers that never change their ndev dynamically do not need to use the get_netdev callback. Signed-off-by: NJason Gunthorpe <jgg@mellanox.com> Acked-by: NSelvin Xavier <selvin.xavier@broadcom.com> Acked-by: NMichal Kalderon <michal.kalderon@marvell.com> Acked-by: NAdit Ranadive <aditr@vmware.com>
-
由 Leon Romanovsky 提交于
Convert SRQ allocation from drivers to be in the IB/core Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 02 4月, 2019 2 次提交
-
-
由 Shamir Rabinovitch 提交于
Now when ib_udata is passed to all the driver's object create/destroy APIs the ib_udata will carry the ib_ucontext for every user command. There is no need to also pass the ib_ucontext via the functions prototypes. Make ib_udata the only argument psssed. Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Shamir Rabinovitch 提交于
The uverbs_attr_bundle with the ucontext is sent down to the drivers ib_x destroy path as ib_udata. The next patch will use the ib_udata to free the drivers destroy path from the dependency in 'uobject->context' as we already did for the create path. Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 23 2月, 2019 1 次提交
-
-
由 Leon Romanovsky 提交于
Following the PD conversion patch, do the same for ucontext allocations. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 12 2月, 2019 1 次提交
-
-
由 Shiraz, Saleem 提交于
Use the for_each_sg_dma_page iterator variant to walk the umem DMA-mapped SGL and get the page DMA address. This avoids the extra loop to iterate pages in the SGE when for_each_sg iterator is used. Additionally, purge umem->page_shift usage in the driver as its only relevant for ODP MRs. Use system page size and shift instead. Signed-off-by: NShiraz, Saleem <shiraz.saleem@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 09 2月, 2019 1 次提交
-
-
由 Leon Romanovsky 提交于
The PD allocations in IB/core allows us to simplify drivers and their error flows in their .alloc_pd() paths. The changes in .alloc_pd() go hand in had with relevant update in .dealloc_pd(). We will use this opportunity and convert .dealloc_pd() to don't fail, as it was suggested a long time ago, failures are not happening as we have never seen a WARN_ON print. Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 11 1月, 2019 2 次提交
-
-
由 Gal Pressman 提交于
The pkey table size is one element, index should be tested for > 0 instead of > 1. Fixes: fe2caefc ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter") Signed-off-by: NGal Pressman <galpress@amazon.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Jason Gunthorpe 提交于
ib_umem_get() can only be called in a method callback, which always has a udata parameter. This allows ib_umem_get() to derive the ucontext pointer directly from the udata without requiring the drivers to find it in some way or another. Signed-off-by: NJason Gunthorpe <jgg@mellanox.com> Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com>
-
- 08 1月, 2019 1 次提交
-
-
由 Luis Chamberlain 提交于
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
- 19 12月, 2018 1 次提交
-
-
由 Shamir Rabinovitch 提交于
Drivers should be using udata to determine if a method is invoked from user space or kernel space. A pd does not necessarily say a different objects is kernel or user. Transforming the tests to use udata eliminates a large number of uobject references from the drivers. Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 12 12月, 2018 1 次提交
-
-
由 Yuval Shaia 提交于
RDMA core layer already make sure port is valid, no need to check it here again. For the pkey validation this depends on commit b3ac5742fead ("RDMA/core: Validate port number in query_pkey verb") Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com> Acked-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 04 10月, 2018 1 次提交
-
-
由 Kamal Heib 提交于
The ll parameter is not used in ib_modify_qp_is_ok(), so remove it. Signed-off-by: NKamal Heib <kamalheib1@gmail.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 31 7月, 2018 2 次提交
-
-
由 Bart Van Assche 提交于
Since neither ib_post_send() nor ib_post_recv() modify the data structure their second argument points at, declare that argument const. This change makes it necessary to declare the 'bad_wr' argument const too and also to modify all ULPs that call ib_post_send(), ib_post_recv() or ib_post_srq_recv(). This patch does not change any functionality but makes it possible for the compiler to verify whether the ib_post_(send|recv|srq_recv) really do not modify the posted work request. To make this possible, only one cast had to be introduce that casts away constness, namely in rpcrdma_post_recvs(). The only way I can think of to avoid that cast is to introduce an additional loop in that function or to change the data type of bad_wr from struct ib_recv_wr ** into int (an index that refers to an element in the work request list). However, both approaches would require even more extensive changes than this patch. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Reviewed-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
由 Bart Van Assche 提交于
When posting a send work request, the work request that is posted is not modified by any of the RDMA drivers. Make this explicit by constifying most ib_send_wr pointers in RDMA transport drivers. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 12 7月, 2018 1 次提交
-
-
由 Bart Van Assche 提交于
This patch does not change any functionality but avoids that sparse reports the following: drivers/infiniband/hw/ocrdma/ocrdma_verbs.c:1818:31: warning: context imbalance in 'ocrdma_destroy_qp' - different lock contexts for basic block Compile-tested only. Signed-off-by: NBart Van Assche <bart.vanassche@wdc.com> Cc: Selvin Xavier <selvin.xavier@broadcom.com> Cc: Devesh Sharma <devesh.sharma@broadcom.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 11 7月, 2018 1 次提交
-
-
由 Jason Gunthorpe 提交于
The internal flag IP_BASED_GIDS was added to a field that was being used to hold the port Info CapabilityMask without considering the effects this will have. Since most drivers just use the value from the HW MAD it means IP_BASED_GIDS will also become set on any HW that sets the IBA flag IsOtherLocalChangesNoticeSupported - which is not intended. Fix this by keeping port_cap_flags only for the IBA CapabilityMask value and store unrelated flags externally. Move the bit definitions for this to ib_mad.h to make it clear what is happening. To keep the uAPI unchanged define a new set of flags in the uapi header that are only used by ib_uverbs_query_port_resp.port_cap_flags which match the current flags supported in rdma-core, and the values exposed by the current kernel. Fixes: b4a26a27 ("IB: Report using RoCE IP based gids in port caps") Signed-off-by: NJason Gunthorpe <jgg@mellanox.com> Signed-off-by: NArtemy Kovalyov <artemyko@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
-
- 19 6月, 2018 1 次提交
-
-
由 Steve Wise 提交于
This patch replaces the ib_device_attr.max_sge with max_send_sge and max_recv_sge. It allows ulps to take advantage of devices that have very different send and recv sge depths. For example cxgb4 has a max_recv_sge of 4, yet a max_send_sge of 16. Splitting out these attributes allows much more efficient use of the SQ for cxgb4 with ulps that use the RDMA_RW API. Consider a large RDMA WRITE that has 16 scattergather entries. With max_sge of 4, the ulp would send 4 WRITE WRs, but with max_sge of 16, it can be done with 1 WRITE WR. Acked-by: NSagi Grimberg <sagi@grimberg.me> Acked-by: NChristoph Hellwig <hch@lst.de> Acked-by: NSelvin Xavier <selvin.xavier@broadcom.com> Acked-by: NShiraz Saleem <shiraz.saleem@intel.com> Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 13 6月, 2018 2 次提交
-
-
由 Kees Cook 提交于
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
由 Kees Cook 提交于
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 04 4月, 2018 1 次提交
-
-
由 Parav Pandit 提交于
ib_query_gid() fetches the GID from the software cache maintained in ib_core for RoCE ports. Therefore, simplify the provider drivers for RoCE to treat query_gid() callback as never called for RoCE, and only require non-RoCE devices to implement it. Signed-off-by: NParav Pandit <parav@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 16 3月, 2018 1 次提交
-
-
由 Parav Pandit 提交于
add_gid() and del_gid() are optional callback routines. ib_core ignores invoking them while updating GID table entries if they are not implemented by provider drivers. Therefore remove them. Reviewed-by: NDaniel Jurgens <danielj@mellanox.com> Reviewed-by: NMark Bloch <markb@mellanox.com> Signed-off-by: NParav Pandit <parav@mellanox.com> Signed-off-by: NLeon Romanovsky <leon@kernel.org> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 03 1月, 2018 1 次提交
-
-
由 Himanshu Jha 提交于
Use dma_zalloc_coherent for allocating zeroed memory and remove unnecessary memset function. Done using Coccinelle. Generated-by: scripts/coccinelle/api/alloc/kzalloc-simple.cocci 0-day tested with no failures. Suggested-by: NLuis R. Rodriguez <mcgrof@kernel.org> Signed-off-by: NHimanshu Jha <himanshujha199640@gmail.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Acked-by: NSelvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-
- 14 12月, 2017 1 次提交
-
-
由 Andrew F. Davis 提交于
Found with scripts/coccinelle/misc/boolconv.cocci. Signed-off-by: NAndrew F. Davis <afd@ti.com> Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>
-