- 21 2月, 2021 6 次提交
-
-
由 Pavel Begunkov 提交于
There is a short window where percpu_refs are already turned zero, but we try to do resurrect(). Play nicer and wait for ->release() to happen in this case and proceed as everything is ok. One downside for ctx refs is that we can ignore signal_pending() on a rare occasion, but someone else should check for it later if needed. Cc: <stable@vger.kernel.org> # 5.5+ Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
io_rsrc_ref_quiesce() is a generic resource function, though now it was wired to allocate and initialise ref nodes with file-specific callbacks/etc. Keep it sane by passing in as a parameters everything we need for initialisations, otherwise it will hurt us badly one day. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
After a rsrc/files reference node's refs are killed, it must never be used. And that's how it works, it either assigns a new node or kills the whole data table. Let's explicitly NULL it, that shouldn't be necessary, but if something would go wrong I'd rather catch a NULL dereference to using a dangling pointer. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
With the prep and prep async split, we now have potentially 3 helpers that need to be defined for !CONFIG_NET. Add some helpers to do just that. Fixes the following compile error on !CONFIG_NET: fs/io_uring.c:6171:10: error: implicit declaration of function 'io_sendmsg_prep_async'; did you mean 'io_req_prep_async'? [-Werror=implicit-function-declaration] return io_sendmsg_prep_async(req); ^~~~~~~~~~~~~~~~~~~~~ io_req_prep_async Fixes: 93642ef8 ("io_uring: split sqe-prep and async setup") Reported-by: NNaresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Hao Xu 提交于
Abaci reported the below issue: [ 141.400455] hrtimer: interrupt took 205853 ns [ 189.869316] process 'usr/local/ilogtail/ilogtail_0.16.26' started with executable stack [ 250.188042] [ 250.188327] ============================================ [ 250.189015] WARNING: possible recursive locking detected [ 250.189732] 5.11.0-rc4 #1 Not tainted [ 250.190267] -------------------------------------------- [ 250.190917] a.out/7363 is trying to acquire lock: [ 250.191506] ffff888114dbcbe8 (&ctx->uring_lock){+.+.}-{3:3}, at: __io_req_task_submit+0x29/0xa0 [ 250.192599] [ 250.192599] but task is already holding lock: [ 250.193309] ffff888114dbfbe8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_register+0xad/0x210 [ 250.194426] [ 250.194426] other info that might help us debug this: [ 250.195238] Possible unsafe locking scenario: [ 250.195238] [ 250.196019] CPU0 [ 250.196411] ---- [ 250.196803] lock(&ctx->uring_lock); [ 250.197420] lock(&ctx->uring_lock); [ 250.197966] [ 250.197966] *** DEADLOCK *** [ 250.197966] [ 250.198837] May be due to missing lock nesting notation [ 250.198837] [ 250.199780] 1 lock held by a.out/7363: [ 250.200373] #0: ffff888114dbfbe8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_register+0xad/0x210 [ 250.201645] [ 250.201645] stack backtrace: [ 250.202298] CPU: 0 PID: 7363 Comm: a.out Not tainted 5.11.0-rc4 #1 [ 250.203144] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 250.203887] Call Trace: [ 250.204302] dump_stack+0xac/0xe3 [ 250.204804] __lock_acquire+0xab6/0x13a0 [ 250.205392] lock_acquire+0x2c3/0x390 [ 250.205928] ? __io_req_task_submit+0x29/0xa0 [ 250.206541] __mutex_lock+0xae/0x9f0 [ 250.207071] ? __io_req_task_submit+0x29/0xa0 [ 250.207745] ? 0xffffffffa0006083 [ 250.208248] ? __io_req_task_submit+0x29/0xa0 [ 250.208845] ? __io_req_task_submit+0x29/0xa0 [ 250.209452] ? __io_req_task_submit+0x5/0xa0 [ 250.210083] __io_req_task_submit+0x29/0xa0 [ 250.210687] io_async_task_func+0x23d/0x4c0 [ 250.211278] task_work_run+0x89/0xd0 [ 250.211884] io_run_task_work_sig+0x50/0xc0 [ 250.212464] io_sqe_files_unregister+0xb2/0x1f0 [ 250.213109] __io_uring_register+0x115a/0x1750 [ 250.213718] ? __x64_sys_io_uring_register+0xad/0x210 [ 250.214395] ? __fget_files+0x15a/0x260 [ 250.214956] __x64_sys_io_uring_register+0xbe/0x210 [ 250.215620] ? trace_hardirqs_on+0x46/0x110 [ 250.216205] do_syscall_64+0x2d/0x40 [ 250.216731] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 250.217455] RIP: 0033:0x7f0fa17e5239 [ 250.218034] Code: 01 00 48 81 c4 80 00 00 00 e9 f1 fe ff ff 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 3d 01 f0 ff ff 73 01 c3 48 8b 0d 27 ec 2c 00 f7 d8 64 89 01 48 [ 250.220343] RSP: 002b:00007f0fa1eeac48 EFLAGS: 00000246 ORIG_RAX: 00000000000001ab [ 250.221360] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0fa17e5239 [ 250.222272] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000008 [ 250.223185] RBP: 00007f0fa1eeae20 R08: 0000000000000000 R09: 0000000000000000 [ 250.224091] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 250.224999] R13: 0000000000021000 R14: 0000000000000000 R15: 00007f0fa1eeb700 This is caused by calling io_run_task_work_sig() to do work under uring_lock while the caller io_sqe_files_unregister() already held uring_lock. To fix this issue, briefly drop uring_lock when calling io_run_task_work_sig(), and there are two things to concern: - hold uring_lock in io_ring_ctx_free() around io_sqe_files_unregister() this is for consistency of lock/unlock. - add new fixed rsrc ref node before dropping uring_lock it's not safe to do io_uring_enter-->percpu_ref_get() with a dying one. - check if rsrc_data->refs is dying to avoid parallel io_sqe_files_unregister Reported-by: NAbaci <abaci@linux.alibaba.com> Fixes: 1ffc5422 ("io_uring: fix io_sqe_files_unregister() hangs") Suggested-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NHao Xu <haoxu@linux.alibaba.com> [axboe: fixes from Pavel folded in] Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
In case of failure io_wq_submit_work() needs to post an CQE and so potentially take uring_lock. The safest way to deal with it is to do that from under task_work where we can safely take the lock. Also, as io_iopoll_check() holds the lock tight and releases it reluctantly, it will play nicer in the furuter with notifying an iopolling task about new such pending failed requests. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 19 2月, 2021 12 次提交
-
-
由 Pavel Begunkov 提交于
[ 97.866748] a.out/2890 is trying to acquire lock: [ 97.867829] ffff8881046763e8 (&ctx->uring_lock){+.+.}-{3:3}, at: io_wq_submit_work+0x155/0x240 [ 97.869735] [ 97.869735] but task is already holding lock: [ 97.871033] ffff88810dfe0be8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_enter+0x3f0/0x5b0 [ 97.873074] [ 97.873074] other info that might help us debug this: [ 97.874520] Possible unsafe locking scenario: [ 97.874520] [ 97.875845] CPU0 [ 97.876440] ---- [ 97.877048] lock(&ctx->uring_lock); [ 97.877961] lock(&ctx->uring_lock); [ 97.878881] [ 97.878881] *** DEADLOCK *** [ 97.878881] [ 97.880341] May be due to missing lock nesting notation [ 97.880341] [ 97.881952] 1 lock held by a.out/2890: [ 97.882873] #0: ffff88810dfe0be8 (&ctx->uring_lock){+.+.}-{3:3}, at: __x64_sys_io_uring_enter+0x3f0/0x5b0 [ 97.885108] [ 97.885108] stack backtrace: [ 97.890457] Call Trace: [ 97.891121] dump_stack+0xac/0xe3 [ 97.891972] __lock_acquire+0xab6/0x13a0 [ 97.892940] lock_acquire+0x2c3/0x390 [ 97.894894] __mutex_lock+0xae/0x9f0 [ 97.901101] io_wq_submit_work+0x155/0x240 [ 97.902112] io_wq_cancel_cb+0x162/0x490 [ 97.904126] io_async_find_and_cancel+0x3b/0x140 [ 97.905247] io_issue_sqe+0x86d/0x13e0 [ 97.909122] __io_queue_sqe+0x10b/0x550 [ 97.913971] io_queue_sqe+0x235/0x470 [ 97.914894] io_submit_sqes+0xcce/0xf10 [ 97.917872] __x64_sys_io_uring_enter+0x3fb/0x5b0 [ 97.921424] do_syscall_64+0x2d/0x40 [ 97.922329] entry_SYSCALL_64_after_hwframe+0x44/0xa9 While holding uring_lock, e.g. from inline execution, async cancel request may attempt cancellations through io_wq_submit_work, which may try to grab a lock. Delay it to task_work, so we do it from a clean context and don't have to worry about locking. Cc: <stable@vger.kernel.org> # 5.5+ Fixes: c07e6719 ("io_uring: hold uring_lock while completing failed polled io in io_wq_submit_work()") Reported-by: NAbaci <abaci@linux.alibaba.com> Reported-by: NHao Xu <haoxu@linux.alibaba.com> Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Instead of marking a link with REQ_F_FAIL_LINK on an error and delaying its failing to the caller, do it eagerly right when after getting an error in io_submit_sqe(). This renders FAIL_LINK checks in io_queue_link_head() useless and we can skip it. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Now, as we can do async setup without holding an SQE, we can skip doing io_req_defer_prep() for link heads, it will be tried to be executed inline and follows all the rules of the non-linked requests. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Now as preparations are split from async setup, we can do the first one pretty early not spilling it across multiple call sites. And after it's done SQE is not needed anymore and we can save on passing it deeply into the submission stack. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
There are two kinds of opcode-specific preparations we do. The first is just initialising req with what is always needed for an opcode and reading all non-generic SQE fields. And the second is copying some of the stuff like iovec preparing to punt a request to somewhere async, e.g. to io-wq or for draining. For requests that have tried an inline execution but still needing to be punted, the second prep type is done by the opcode handler itself. Currently, we don't explicitly split those preparation steps, but combining both of them into io_*_prep(), altering the behaviour by allocating ->async_data. That's pretty messy and hard to follow and also gets in the way of some optimisations. Split the steps, leave the first type as where it is now, and put the second into a new io_req_prep_async() helper. It may make us to do opcode switch twice, but it's worth it. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
If we get an error in io_init_req() for a request that would have been linked, we break the submission but still issue a partially composed link, that's nasty, fail it instead. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Move struct io_submit_link into submit_state, which is a part of a submission state and so belongs to it. It saves us from explicitly passing it, and init/deinit is now nicely hidden in io_submit_state_[start,end]. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Behaves identically, just move io_init_req() call into the beginning of io_submit_sqes(). That looks better unloads io_submit_sqes(). Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
A preparation patch, symbol to symbol move io_init_req() + io_check_restriction() a bit up. The submission path is pretty settled down, so don't worry about backports and move the functions instead of relying on forward declarations in the future. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
IORING_OP_SYNC_FILE_RANGE is marked as .needs_file, so the common path will take care of assigning and validating req->file, no need to duplicate it in io_sfr_prep(). Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Follow io_*_prep() naming pattern, there are only fsync and sfr that don't do that. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
@i and @Submitted are very much coupled together, and there is no need to keep them both. Remove @i, it doesn't change generated binary but helps to keep a single source of truth. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 18 2月, 2021 1 次提交
-
-
由 Pavel Begunkov 提交于
Don't forget to free iovec read inline completion and bunch of other cases that do "goto done" before setting up an async context. Fixes: 5ea5dd45 ("io_uring: inline io_read()'s iovec freeing") Reported-by: NJens Axboe <axboe@kernel.dk> Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 17 2月, 2021 1 次提交
-
-
由 Jens Axboe 提交于
We add task_work from any context, hence we need to ensure that we can tolerate it being from IRQ context as well. Fixes: 7cbf1722 ("io_uring: provide FIFO ordering for task_work") Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 14 2月, 2021 3 次提交
-
-
由 Jens Axboe 提交于
Be nice and prune these upfront, in case the ring is being shared and one of the tasks is going away. This is a bit more important now that we account the allocations. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
We have three different ones, put it in a helper for easy calling. This is in preparation for doing it outside of ring freeing as well. With that in mind, also ensure that we do the proper locking for safe calling from a context where the ring it still live. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
No changes in this patch, just allows a caller to pass in a targeted task that we must match for freeing requests in the cache. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 13 2月, 2021 3 次提交
-
-
由 Pavel Begunkov 提交于
Invalid req->flags are tolerated by free/put well, avoid this dancing needlessly presetting it to zero, and then not even resetting but modifying it, i.e. "|=". Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Indirectly io_req_find_next() is called for every request, optimise the check by testing flags as it was long before -- __io_req_find_next() tolerates false-positives well (i.e. link==NULL), and those should be really rare. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
io_sq_thread_acquire_mm_files() can find a PF_EXITING task only when it's called from task_work context. Don't check it in all other cases, that are when we're in io_uring_enter(). Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 12 2月, 2021 11 次提交
-
-
由 Pavel Begunkov 提交于
Remove io_consume_sqe() and inline it back into io_get_sqe(). It requires req dealloc on error, but in exchange we get cleaner io_submit_sqes() and better locality for cached_sq_head. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Do a little trick in io_ring_ctx_free() briefly taking uring_lock, that will wait for everyone currently holding it, so we can skip pinning ctx with ctx->refs for __io_req_task_submit(), which is executed and loses its refs/reqs while holding the lock. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Don't hand code io_req_task_queue() inside of io_async_buf_func(), just call it. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
There are two reasons for this. First is to optimise io_sq_thread_acquire_mm_files() for non-SQPOLL case, which currently do too many checks and function calls in the hot path, e.g. in io_init_req(). The second is to not grab mm/files when there are not needed. As __io_queue_sqe() issues only one request now, we can reuse io_sq_thread_acquire_mm_files() instead of unconditional acquire mm/files. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
__io_queue_sqe() tries to issue as much requests of a link as it can, and uses io_put_req_find_next() to extract a next one, targeting inline completed requests. As now __io_queue_sqe() is always used together with struct io_comp_state, it leaves next propagation only a small window and only for async reqs, that doesn't justify its existence. Remove it, make __io_queue_sqe() to issue only a head request. It simplifies the code and will allow other optimisations. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Completion and submission states are now coupled together, it's weird to get one from argument and another from ctx, do it consistently for io_req_free_batch(). It's also faster as we already have @state cached in registers. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
__io_complete_rw() casts request to kiocb for it to be immediately container_of()'ed by io_complete_rw_common(). And the last function's name doesn't do a great job of illuminating its purposes, so just inline it in its only user. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
We pass return code into io_rw_reissue() only to be able to check if it's -EAGAIN. That's not the cleanest approach and may prevent inlining of the non-EAGAIN fast path, so do it at call sites. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
Don't stash -EAGAIN'ed iopoll requests into a list to reissue it later, do it eagerly. It removes overhead on keeping and checking that list, and allows in case of failure for these requests to be completed through normal iopoll completion path. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
io_req_free_batch_finish() is final and does not permit struct req_batch to be reused without re-init. To be more consistent don't clear ->task there. Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Jens Axboe 提交于
We recently added the submit side req cache, but it was placed at the end of the struct. Move it near the other submission state for better memory placement, and reshuffle a few other members at the same time. Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 11 2月, 2021 3 次提交
-
-
由 Jens Axboe 提交于
We use the assigned slot in io_sqe_file_register(), and a previous patch moved the assignment to after we have called it. This isn't super pretty, and will get cleaned up in the future. For now, fix the regression by restoring the previous assignment/clear of the file_slot. Fixes: ea64ec02 ("io_uring: deduplicate file table slot calculation") Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Colin Ian King 提交于
The variable ret is being initialized with a value that is never read and it is being updated later with a new value. The initialization is redundant and can be removed. Addresses-Coverity: ("Unused value") Fixes: b63534c4 ("io_uring: re-issue block requests that failed because of resources") Signed-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NChaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 Pavel Begunkov 提交于
We park SQPOLL task before going into io_uring_cancel_files(), so the task won't run task_works including those that might be important for the cancellation passes. In this case it's io_poll_remove_one(), which frees requests via io_put_req_deferred(). Unpark it for while waiting, it's ok as we disable submissions beforehand, so no new requests will be generated. INFO: task syz-executor893:8493 blocked for more than 143 seconds. Call Trace: context_switch kernel/sched/core.c:4327 [inline] __schedule+0x90c/0x21a0 kernel/sched/core.c:5078 schedule+0xcf/0x270 kernel/sched/core.c:5157 io_uring_cancel_files fs/io_uring.c:8912 [inline] io_uring_cancel_task_requests+0xe70/0x11a0 fs/io_uring.c:8979 __io_uring_files_cancel+0x110/0x1b0 fs/io_uring.c:9067 io_uring_files_cancel include/linux/io_uring.h:51 [inline] do_exit+0x2fe/0x2ae0 kernel/exit.c:780 do_group_exit+0x125/0x310 kernel/exit.c:922 __do_sys_exit_group kernel/exit.c:933 [inline] __se_sys_exit_group kernel/exit.c:931 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:931 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: stable@vger.kernel.org # 5.5+ Reported-by: syzbot+695b03d82fa8e4901b06@syzkaller.appspotmail.com Signed-off-by: NPavel Begunkov <asml.silence@gmail.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-