- 29 1月, 2011 1 次提交
-
-
由 Stanislaw Gruszka 提交于
We use priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist conditional in few places, merge it into one function. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 22 1月, 2011 2 次提交
-
-
由 Jay Sternberg 提交于
the sram data dumped through the debugfs interface would only work properly when dumping data on even u32 boundaries and swap bytes based on endianness on that boundary making byte arrays impossible to read. now addresses are displayed at the start of every line and the data is displayed consistently if dumping 1 byte or 20 and regardless of what is the starting address. if no lenght given, address displayed is u32 in device format Signed-off-by: NJay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
Instead of keeping track of LED blink speed in the driver, use the new mac80211 trigger and link it up with an LED classdev that we now register. This also allows users more flexibility in how they want to have the LED blink or not. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 14 12月, 2010 1 次提交
-
-
由 Wey-Yi Guy 提交于
For debugging purpose, keep track of the bt coex enable/disable state. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 07 12月, 2010 1 次提交
-
-
由 Stanislaw Gruszka 提交于
This patch replace monitor/recover timer by watchdog based on time stamp. New code allow to discover hangs more precisely. Timeout values are currently doubled monitoring period values of previous timer. This have to be tuned based of firmware timing capabilities. Tested on 3945, 4965, 5300, 6300. Signed-off-by: NStanislaw Gruszka <sgruszka@redhat.com> Acked-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 16 11月, 2010 2 次提交
-
-
由 Johannes Berg 提交于
Previously, we used the swq_id's mechanism to have AC and HW queue different only for aggregation queues. To be able to fix a bug with iPAN simply always build the swq_id as ac | (hwq << 2) and remove the flag bit. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
Use dynamic aggregation threshold if bt traffic load is high to reduce the impact on aggregated frame. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 08 10月, 2010 1 次提交
-
-
由 Johannes Berg 提交于
A number of declarations in iwl-core.h should be in agn specific files, and also rename the iwl-calib.h file to iwl-agn-calib.h to better reflect that it belongs to agn. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 06 10月, 2010 1 次提交
-
-
由 Wey-Yi Guy 提交于
move paramater definitions to a device paramater structure only leaving the device name, which antennas are used and what firmware file to use in the iwl_cfg structure. this will not completely remove the redundancies but greatly reduce them for devices that only vary by name or antennas. the parameters that are more likely to change within a given device family are left in iwl_cfg. also separate bt param structure added to help reduce more. Signed-off-by: NJay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 18 9月, 2010 1 次提交
-
-
由 Wey-Yi Guy 提交于
Tx command response sent to host by uCode after completed the transmission attempt. The status parameter indicates whether the transmission was successful, or else why if failed. Here we keep the counters to help understand the different failure cases. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 16 9月, 2010 1 次提交
-
-
由 Arnd Bergmann 提交于
The default llseek operation is changing from default_llseek to no_llseek, so all code relying on the current behaviour needs to make that explicit. The wireless driver infrastructure and some of the drivers make use of generated debugfs files, so they cannot be converted by our script that automatically determines the right operation. All these files use debugfs and they typically rely on simple_read_from_buffer, so the best llseek operation here is generic_file_llseek. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org
-
- 11 9月, 2010 2 次提交
-
-
由 Wey-Yi Guy 提交于
Even driver use rts/cts protection mode for aggregation packets by default. Allow the protection mode to be configure through debugfs Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
由 Wey-Yi Guy 提交于
When sysassert happen, uCode will report the error code, driver dump the information to dmesg. Here also remember the last error code for future reference. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 28 8月, 2010 1 次提交
-
-
由 Johannes Berg 提交于
Since mac80211 doesn't currently enable/disable QoS per interface, we can't yet do it properly, but we can already prepare for it and move the QoS data and command ID into the context struct. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 27 8月, 2010 1 次提交
-
-
由 Johannes Berg 提交于
In order to support multiple interfaces, we must move a lot of data into per-context structures so we can use the contexts the device offers. To start with, this makes a lot of code context-aware, more changes will move more things into the context structure. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 26 8月, 2010 2 次提交
-
-
由 Wey-Yi Guy 提交于
Add the debugfs file to show current bluetooth traffic load Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Wey-Yi Guy 提交于
In current implementation, stuck queue timer is fixed to 1 second. Add debugfs file to modify the timer to enhance the flexibility: Set the monitor_period as following: 0: disable stuck queue force reset function 1 - 60000: monitor period (1 - 60 second) Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 25 8月, 2010 1 次提交
-
-
由 Shanyu Zhao 提交于
A few cases in iwlwifi driver function ieee80211_frequency_to_channel() is called to get channel number from center frequency. This is not needed since the channel number is already saved in hw_value field of struct ieee80211_channel in function iwlcore_init_geos(). So replace those function calls with hw_value field of struct ieee80211_channel. Signed-off-by: NShanyu Zhao <shanyu.zhao@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 23 7月, 2010 1 次提交
-
-
由 Wey-Yi Guy 提交于
For WiFi/BT combo devices, add bluetooth statistics counter read function to debugfs. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com>
-
- 15 7月, 2010 1 次提交
-
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 03 7月, 2010 2 次提交
-
-
由 Wey-Yi Guy 提交于
Add debugfs file for REPLY_TXFIFO_FLUSH host command testing. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
fw_restart module parameter was broken by the recent check for stuck queue patch, driver check the fx_restart module parameter before reload the firmware; but the stuck queue timer kick in after firmware error and reload the firmware even fw_restart=0. In this case, driver should not reload the firmware, it is important to help debugging uCode error. The only case we can ignore the module parameter is when user request firmware reload from debugfs, which can bypass the checking and perform firmware reload all the time. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 26 6月, 2010 1 次提交
-
-
由 Wey-Yi Guy 提交于
For some devices, especially the upcoming new devices, the plcp error rate is different. Before the correct error rate can be determine, also for the debugging purpose; add the mechanism to disable plcp error checking which cause radio reset happen. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 15 6月, 2010 1 次提交
-
-
由 Dor Shaish 提交于
Test for null pointer prior to access. Print "Not Allocated" if null pointer. Signed-off-by: NDor Shaish <dor.shaish@intel.com> Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 14 5月, 2010 3 次提交
-
-
由 Johannes Berg 提交于
The stations debugfs entry doesn't even show the stations' MAC addresses Also, the TID information is formatted very oddly, and misses the important tfds_in_queue variable. Fix this to make the file more useful. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Since agn and 3945 have different statistics_notif data structure, each should has its own statistics_flag function. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
agn and 3945 has different statistics_notif data structure; since 3945 has it statistics_notif data structure inside the _3945 portion of iwl_priv, it make sense to move the agn statistics_notif into _agn portion. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 11 5月, 2010 7 次提交
-
-
由 Wey-Yi Guy 提交于
Move "tx power per chain" into ucode_tx_stats, it is debugging information provided by uCode as part of statistics notification. The "tx power per chain" parameters are optional parameters which only supported by 6000 series device today; those are reserved fields for all the other devices. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Return -EAGAIN when request tx power information and uCode is not ready; so it will not confuse with tx power information not available. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
sensitivity calibration and chain noise calibration are not available for all the devices; use .cfg to configure the availability of those calibration functions Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Instead of checking device type for enable/disable continuous ucode trace function; put it in .cfg for better control and more flexibilities. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
Instead of checking device type for enable/disable tx power control, move it to .cfg for better control and more flexibilities. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
The "chain_tx_power" debugfs function is to display the tx power per chain based. Name it "tx_power" is misleading. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
For the devices do not have power save support, remove the power save control related debugfs files. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 01 5月, 2010 1 次提交
-
-
由 Abhijeet Kolekar 提交于
Add general, rx and tx uCode statistics to 3945. This will help in debugging Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 17 4月, 2010 1 次提交
-
-
由 Abhijeet Kolekar 提交于
Seperate debugfs functions into iwlagn specific debugfs file and Add debugfs ops to iwlwifi. Signed-off-by: NAbhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 10 3月, 2010 3 次提交
-
-
由 Wey-Yi Guy 提交于
"internal_scan" debugfs function serves the same propose of mode "0" of "force_reset" debugfs function. Remove it to avoid duplicate. Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Wey-Yi Guy 提交于
small code cleanup to remove un-necessary parameters Signed-off-by: NWey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-
由 Johannes Berg 提交于
These files are incompatible with some changes I'm making, and don't really belong into sysfs anyway as they can only be used for debugging. Since writing them will probably crash the firmware, keep only the reading part and move them into debugfs. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NReinette Chatre <reinette.chatre@intel.com>
-