Replace ctxid with sid in selinux_audit_rule_match interface for
consistency with other interfaces.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Rename selinux_ctxid_to_string to selinux_sid_to_string to be
consistent with other interfaces.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Eliminate selinux_task_ctxid since it duplicates selinux_task_get_sid.
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Acked-by: NJames Morris <jmorris@namei.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There are many places where we need to determine the node of a zone.
Currently we use a difficult to read sequence of pointer dereferencing.
Put that into an inline function and use throughout VM.  Maybe we can find
a way to optimize the lookup in the future.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Currently one can enable slab reclaim by setting an explicit option in
/proc/sys/vm/zone_reclaim_mode.  Slab reclaim is then used as a final
option if the freeing of unmapped file backed pages is not enough to free
enough pages to allow a local allocation.

However, that means that the slab can grow excessively and that most memory
of a node may be used by slabs.  We have had a case where a machine with
46GB of memory was using 40-42GB for slab.  Zone reclaim was effective in
dealing with pagecache pages.  However, slab reclaim was only done during
global reclaim (which is a bit rare on NUMA systems).

This patch implements slab reclaim during zone reclaim.  Zone reclaim
occurs if there is a danger of an off node allocation.  At that point we

1. Shrink the per node page cache if the number of pagecache
   pages is more than min_unmapped_ratio percent of pages in a zone.

2. Shrink the slab cache if the number of the nodes reclaimable slab pages
   (patch depends on earlier one that implements that counter)
   are more than min_slab_ratio (a new /proc/sys/vm tunable).

The shrinking of the slab cache is a bit problematic since it is not node
specific.  So we simply calculate what point in the slab we want to reach
(current per node slab use minus the number of pages that neeed to be
allocated) and then repeately run the global reclaim until that is
unsuccessful or we have reached the limit.  I hope we will have zone based
slab reclaim at some point which will make that easier.

The default for the min_slab_ratio is 5%

Also remove the slab option from /proc/sys/vm/zone_reclaim_mode.

[akpm@osdl.org: cleanups]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove the atomic counter for slab_reclaim_pages and replace the counter
and NR_SLAB with two ZVC counter that account for unreclaimable and
reclaimable slab pages: NR_SLAB_RECLAIMABLE and NR_SLAB_UNRECLAIMABLE.

Change the check in vmscan.c to refer to to NR_SLAB_RECLAIMABLE.  The
intend seems to be to check for slab pages that could be freed.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

*_pages is a better description of the role of the variable.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In many places we will need to use the same combination of flags.  Specify
a single GFP_THISNODE definition for ease of use in gfp.h.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[PATCH] Add __GFP_THISNODE to avoid fallback to other nodes and ignore cpuset/memory policy restrictions

Add a new gfp flag __GFP_THISNODE to avoid fallback to other nodes.  This
flag is essential if a kernel component requires memory to be located on a
certain node.  It will be needed for alloc_pages_node() to force allocation
on the indicated node and for alloc_pages() to force allocation on the
current node.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Andy Whitcroft <apw@shadowen.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

[akpm@osdl.org: export fix]
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Let's try to keep mm/ comments more useful and up to date. This is a start.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

lock_page needs the caller to have a reference on the page->mapping inode
due to sync_page, ergo set_page_dirty_lock is obviously buggy according to
its comments.

Solve it by introducing a new lock_page_nosync which does not do a sync_page.

akpm: unpleasant solution to an unpleasant problem.  If it goes wrong it could
cause great slowdowns while the lock_page() caller waits for kblockd to
perform the unplug.  And if a filesystem has special sync_page() requirements
(none presently do), permanent hangs are possible.

otoh, set_page_dirty_lock() is usually (always?) called against userspace
pages.  They are always up-to-date, so there shouldn't be any pending read I/O
against these pages.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch splits alloc_percpu() up into two phases.  Likewise for
free_percpu().  This allows clients to limit initial allocations to online
cpu's, and to populate or depopulate per-cpu data at run time as needed:

  struct my_struct *obj;

  /* initial allocation for online cpu's */
  obj = percpu_alloc(sizeof(struct my_struct), GFP_KERNEL);

  ...

  /* populate per-cpu data for cpu coming online */
  ptr = percpu_populate(obj, sizeof(struct my_struct), GFP_KERNEL, cpu);

  ...

  /* access per-cpu object */
  ptr = percpu_ptr(obj, smp_processor_id());

  ...

  /* depopulate per-cpu data for cpu going offline */
  percpu_depopulate(obj, cpu);

  ...

  /* final removal */
  percpu_free(obj);
Signed-off-by: NMartin Peschke <mp3@de.ibm.com>
Cc: Paul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add a notifer chain to the out of memory killer.  If one of the registered
callbacks could release some memory, do not kill the process but return and
retry the allocation that forced the oom killer to run.

The purpose of the notifier is to add a safety net in the presence of
memory ballooners.  If the resource manager inflated the balloon to a size
where memory allocations can not be satisfied anymore, it is better to
deflate the balloon a bit instead of killing processes.

The implementation for the s390 ballooner is included.

[akpm@osdl.org: cleanups]
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I wonder why we need this bitmask indexing into zone->node_zonelists[]?

We always start with the highest zone and then include all lower zones
if we build zonelists.

Are there really cases where we need allocation from ZONE_DMA or
ZONE_HIGHMEM but not ZONE_NORMAL? It seems that the current implementation
of highest_zone() makes that already impossible.

If we go linear on the index then gfp_zone() == highest_zone() and a lot
of definitions fall by the wayside.

We can now revert back to the use of gfp_zone() in mempolicy.c ;-)
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After we have done this we can now do some typing cleanup.

The memory policy layer keeps a policy_zone that specifies
the zone that gets memory policies applied. This variable
can now be of type enum zone_type.

The check_highest_zone function and the build_zonelists funnctionm must
then also take a enum zone_type parameter.

Plus there are a number of loops over zones that also should use
zone_type.

We run into some troubles at some points with functions that need a
zone_type variable to become -1. Fix that up.

[pj@sgi.com: fix set_mempolicy() crash]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NPaul Jackson <pj@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There is a check in zonelist_policy that compares pieces of the bitmap
obtained from a gfp mask via GFP_ZONETYPES with a zone number in function
zonelist_policy().

The bitmap is an ORed mask of __GFP_DMA, __GFP_DMA32 and __GFP_HIGHMEM.
The policy_zone is a zone number with the possible values of ZONE_DMA,
ZONE_DMA32, ZONE_HIGHMEM and ZONE_NORMAL. These are two different domains
of values.

For some reason seemed to work before the zone reduction patchset (It
definitely works on SGI boxes since we just have one zone and the check
cannot fail).

With the zone reduction patchset this check definitely fails on systems
with two zones if the system actually has memory in both zones.

This is because ZONE_NORMAL is selected using no __GFP flag at
all and thus gfp_zone(gfpmask) == 0. ZONE_DMA is selected when __GFP_DMA
is set. __GFP_DMA is 0x01.  So gfp_zone(gfpmask) == 1.

policy_zone is set to ZONE_NORMAL (==1) if ZONE_NORMAL and ZONE_DMA are
populated.

For ZONE_NORMAL gfp_zone(<no _GFP_DMA>) yields 0 which is <
policy_zone(ZONE_NORMAL) and so policy is not applied to regular memory
allocations!

Instead gfp_zone(__GFP_DMA) == 1 which results in policy being applied
to DMA allocations!

What we realy want in that place is to establish the highest allowable
zone for a given gfp_mask. If the highest zone is higher or equal to the
policy_zone then memory policies need to be applied. We have such
a highest_zone() function in page_alloc.c.

So move the highest_zone() function from mm/page_alloc.c into
include/linux/gfp.h.  On the way we simplify the function and use the new
zone_type that was also introduced with the zone reduction patchset plus we
also specify the right type for the gfp flags parameter.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NLee Schermerhorn <Lee.Schermerhorn@hp.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

eventcounters: Do not display counters for zones that are not available on an
arch

Do not define or display counters for the DMA32 and the HIGHMEM zone if such
zones were not configured.

[akpm@osdl.org: s390 fix]
[heiko.carstens@de.ibm.com: s390 fix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make ZONE_HIGHMEM optional

- ifdef out code and definitions related to CONFIG_HIGHMEM

- __GFP_HIGHMEM falls back to normal allocations if there is no
  ZONE_HIGHMEM

- GFP_ZONEMASK becomes 0x01 if there is no DMA32 and no HIGHMEM
  zone.

[jdike@addtoit.com: build fix]
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NChristoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Make ZONE_DMA32 optional

- Add #ifdefs around ZONE_DMA32 specific code and definitions.

- Add CONFIG_ZONE_DMA32 config option and use that for x86_64
  that alone needs this zone.

- Remove the use of CONFIG_DMA_IS_DMA32 and CONFIG_DMA_IS_NORMAL
  for ia64 and fix up the way per node ZVCs are calculated.

- Fall back to prior GFP_ZONEMASK of 0x03 if there is no
  DMA32 zone.
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Use enum for zones and reformat zones dependent information

Add comments explaning the use of zones and add a zones_t type for zone
numbers.

Line up information that will be #ifdefd by the following patches.

[akpm@osdl.org: comment cleanups]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Move totalhigh_pages and nr_free_highpages() into highmem.c/.h

Move the totalhigh_pages definition into highmem.c/.h.  Move the
nr_free_highpages function into highmem.c

[yoichi_yuasa@tripeaks.co.jp: build fix]
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

It fixes various coding style issues, specially when spaces are useless.  For
example '*' go next to the function name.
Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

__init in headers is pretty useless because the compiler doesn't check it, and
they get out of sync relatively frequently.  So if you see an __init in a
header file, it's quite unreliable and you need to check the definition
anyway.
Signed-off-by: NFranck Bui-Huu <vagabon.xyz@gmail.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch makes the following needlessly global functions static:
 - slab.c: kmem_find_general_cachep()
 - swap.c: __page_cache_release()
 - vmalloc.c: __vmalloc_node()
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Now that we can detect writers of shared mappings, throttle them.  Avoids OOM
by surprise.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Tracking of dirty pages in shared writeable mmap()s.

The idea is simple: write protect clean shared writeable pages, catch the
write-fault, make writeable and set dirty.  On page write-back clean all the
PTE dirty bits and write protect them once again.

The implementation is a tad harder, mainly because the default
backing_dev_info capabilities were too loosely maintained.  Hence it is not
enough to test the backing_dev_info for cap_account_dirty.

The current heuristic is as follows, a VMA is eligible when:
 - its shared writeable
    (vm_flags & (VM_WRITE|VM_SHARED)) == (VM_WRITE|VM_SHARED)
 - it is not a 'special' mapping
    (vm_flags & (VM_PFNMAP|VM_INSERTPAGE)) == 0
 - the backing_dev_info is cap_account_dirty
    mapping_cap_account_dirty(vma->vm_file->f_mapping)
 - f_op->mmap() didn't change the default page protection

Page from remap_pfn_range() are explicitly excluded because their COW
semantics are already horrid enough (see vm_normal_page() in do_wp_page()) and
because they don't have a backing store anyway.

mprotect() is taught about the new behaviour as well.  However it overrides
the last condition.

Cleaning the pages on write-back is done with page_mkclean() a new rmap call.
It can be called on any page, but is currently only implemented for mapped
pages, if the page is found the be of a VMA that accounts dirty pages it will
also wrprotect the PTE.

Finally, in fs/buffers.c:try_to_free_buffers(); remove clear_page_dirty() from
under ->private_lock.  This seems to be safe, since ->private_lock is used to
serialize access to the buffers, not the page itself.  This is needed because
clear_page_dirty() will call into page_mkclean() and would thereby violate
locking order.

[dhowells@redhat.com: Provide a page_mkclean() implementation for NOMMU]
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Hugh Dickins <hugh@veritas.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Introduce a VM_BUG_ON, which is turned on with CONFIG_DEBUG_VM.  Use this
in the lightweight, inline refcounting functions; PageLRU and PageActive
checks in vmscan, because they're pretty well confined to vmscan.  And in
page allocate/free fastpaths which can be the hottest parts of the kernel
for kbuilds.

Unlike BUG_ON, VM_BUG_ON must not be used to execute statements with
side-effects, and should not be used outside core mm code.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Give non-highmem architectures access to the kmap API for the purposes of
overriding (this is what the attached patch does).

The proposal is that we should now require all architectures with coherence
issues to manage data coherence via the kmap/kunmap API.  Thus driver
writers never have to write code like

    kmap(page)
    modify data in page
    flush_kernel_dcache_page(page)
    kunmap(page)

instead, kmap/kunmap will manage the coherence and driver (and filesystem)
writers don't need to worry about how to flush between kmap and kunmap.

For most architectures, the page only needs to be flushed if it was
actually written to *and* there are user mappings of it, so the best
implementation looks to be: clear the page dirty pte bit in the kernel page
tables on kmap and on kunmap, check page->mappings for user maps, and then
the dirty bit, and only flush if it both has user mappings and is dirty.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

get_cpu_var()/per_cpu()/__get_cpu_var() arguments must be simple
identifiers.  Otherwise the arch dependent implementations might break.

This patch enforces the correct usage of the macros by producing a syntax
error if the variable is not a simple identifier.
Signed-off-by: NJan Blunck <jblunck@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

They all contain the same thing.  Instead, have a single generic one in
include/asm-generic, and permit an arch to override as needed.
Signed-off-by: NJeff Garzik <jeff@garzik.org>

This patch adds xt_dscp.h and xt_DSCP.h to the kernel headers which are
exported via 'make headers_install'. These are necessary for userspace
to add rules using dscp match and DSCP target.
Signed-off-by: NYasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>

Signed-off-by: NIan McDonald <ian.mcdonald@jandi.co.nz>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>

Some file systems want to manually d_move() the dentries involved in a
rename.  We can do this by making use of the FS_ODD_RENAME flag if we just
have nfs_rename() unconditionally do the d_move().  While there, we rename
the flag to be more descriptive.

OCFS2 uses this to protect that part of the rename operation with a cluster
lock.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>
Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>

This has been discussed on dccp@vger and removes the necessity for applications
to supply service codes in each and every case.

If an application does not want to provide a service code, that's fine, it will
be given 0. Otherwise, service codes can be set via socket options as before.

This patch has been tested using various client/server configurations
(including listening on multiple service codes).
Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
Signed-off-by: NArnaldo Carvalho de Melo <acme@mandriva.com>